From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753447AbdKXCiG (ORCPT ); Thu, 23 Nov 2017 21:38:06 -0500 Received: from mail-pl0-f66.google.com ([209.85.160.66]:42389 "EHLO mail-pl0-f66.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753427AbdKXCiC (ORCPT ); Thu, 23 Nov 2017 21:38:02 -0500 X-Google-Smtp-Source: AGs4zMbF7u0s3OvA1bgB20hr6h/xwg8fviBMR6mic3UO2aOZ2mij7ehz4Po/ApRe+DKS/uOixgmwvA== From: Jacob Chen To: linux-rockchip@lists.infradead.org Cc: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, mchehab@kernel.org, linux-media@vger.kernel.org, sakari.ailus@linux.intel.com, hans.verkuil@cisco.com, tfiga@chromium.org, zhengsq@rock-chips.com, laurent.pinchart@ideasonboard.com, zyc@rock-chips.com, eddie.cai.linux@gmail.com, jeffy.chen@rock-chips.com, allon.huang@rock-chips.com, devicetree@vger.kernel.org, heiko@sntech.de, robh+dt@kernel.org, Jacob Chen , Jacob Chen Subject: [PATCH v2 06/11] dt-bindings: Document the Rockchip MIPI RX D-PHY bindings Date: Fri, 24 Nov 2017 10:37:01 +0800 Message-Id: <20171124023706.5702-7-jacob-chen@iotwrt.com> X-Mailer: git-send-email 2.15.0 In-Reply-To: <20171124023706.5702-1-jacob-chen@iotwrt.com> References: <20171124023706.5702-1-jacob-chen@iotwrt.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add DT bindings documentation for Rockchip MIPI D-PHY RX Signed-off-by: Jacob Chen --- .../bindings/media/rockchip-mipi-dphy.txt | 77 ++++++++++++++++++++++ 1 file changed, 77 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/rockchip-mipi-dphy.txt diff --git a/Documentation/devicetree/bindings/media/rockchip-mipi-dphy.txt b/Documentation/devicetree/bindings/media/rockchip-mipi-dphy.txt new file mode 100644 index 000000000000..b5773b67c250 --- /dev/null +++ b/Documentation/devicetree/bindings/media/rockchip-mipi-dphy.txt @@ -0,0 +1,77 @@ +Rockchip SoC MIPI RX D-PHY +------------------------------------------------------------- + +Required properties: + +- compatible: value should be one of the following + "rockchip,rk3288-mipi-dphy"; + "rockchip,rk3399-mipi-dphy"; +- rockchip,grf: GRF regs. +- bus-width : maximum number of data lanes supported (SoC specific); +- clocks : list of clock specifiers, corresponding to entries in + clock-names property; +- clock-names: required clock name. + +The device node should contain two 'port' child node, according to the bindings +defined in Documentation/devicetree/bindings/media/video-interfaces.txt. +The first port should be connected to sensor nodes, and the second port should be +connected to isp node. The following are properties specific to those nodes. + +endpoint node +------------- + +- data-lanes : (required) an array specifying active physical MIPI-CSI2 + data input lanes and their mapping to logical lanes; the + array's content is unused, only its length is meaningful; + + +Example: + +/* SoC properties */ + + mipi_dphy_rx0: mipi-dphy-rx0 { + compatible = "rockchip,rk3399-mipi-dphy"; + clocks = <&cru SCLK_MIPIDPHY_REF>, + <&cru SCLK_DPHY_RX0_CFG>, + <&cru PCLK_VIO_GRF>; + clock-names = "dphy-ref", "dphy-cfg", "grf"; + power-domains = <&power RK3399_PD_VIO>; + bus-width = <4>; + }; + +/* Board properties */ + + &mipi_phy_rx0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + mipi_in_wcam: endpoint@0 { + reg = <0>; + remote-endpoint = <&wcam_out>; + data-lanes = <1 2>; + }; + mipi_in_ucam: endpoint@1 { + reg = <1>; + remote-endpoint = <&ucam_out>; + data-lanes = <1>; + }; + }; + + port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + dphy_rx0_out: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0_mipi_in>; + }; + }; + }; + }; \ No newline at end of file -- 2.15.0