From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753019AbdLDBbb (ORCPT ); Sun, 3 Dec 2017 20:31:31 -0500 Received: from szxga06-in.huawei.com ([45.249.212.32]:56228 "EHLO huawei.com" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1752750AbdLDBav (ORCPT ); Sun, 3 Dec 2017 20:30:51 -0500 From: Salil Mehta To: CC: , , , , , , , Subject: [PATCH V2 net-next 0/3] net: hns3: Refactors "reset" handling code in HCLGE layer of HNS3 driver Date: Mon, 4 Dec 2017 01:29:52 +0000 Message-ID: <20171204012955.17560-1-salil.mehta@huawei.com> X-Mailer: git-send-email 2.8.3 MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [10.47.83.141] X-CFilter-Loop: Reflected Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patch refactors the code of the reset feature in HCLGE layer of HNS3 PF driver. Prime motivation to do this change is: 1. To reduce the time for which common miscellaneous Vector 0 interrupt is disabled because of the reset. Simplification of the common miscellaneous interrupt handler routine(for Vector 0) used to handle reset and other sources of Vector 0 interrupt. 2. Separate the task for handling the reset 3. Simplification of reset request submission and pending reset logic. To achieve above below few things have been done: 1. Interrupt is disabled while common miscellaneous interrupt handler is entered and re-enabled before it is exit. This reduces the interrupt handling latency as compared to older interrupt handling scheme where interrupt was being disabled in interrupt handler context and re-enabled in task context some time later. Made Miscellaneous interrupt handler more generic to handle all sources including reset interrupt source. 2. New reset service task has been introduced to service the reset handling. 3. Introduces new reset service task for honoring software reset requests like from network stack related to timeout and serving the pending reset request(to reset the driver and associated clients). Change Log: Patch V2: Addressed comment by Andrew Lunn Link: https://lkml.org/lkml/2017/12/1/366 Patch V1: Initial Submit Salil Mehta (3): net: hns3: Refactor of the reset interrupt handling logic net: hns3: Add reset service task for handling reset requests net: hns3: Refactors the requested reset & pending reset handling code .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 222 ++++++++++++++------- .../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 12 +- 2 files changed, 166 insertions(+), 68 deletions(-) -- 2.11.0