[PATCH] dmaengine: ti-dma-crossbar: Fix event mapping for TPCC_EVT_MUX_60_63

[Peter Ujfalusi <peter.ujfalusi@ti.com>]

From: Vignesh R <vigneshr@ti.com>

Register layout of a typical TPCC_EVT_MUX_M_N register is such that the
lowest numbered event is at the lowest byte address and highest numbered
event at highest byte address. But TPCC_EVT_MUX_60_63 register layout is
different,  in that the lowest numbered event is at the highest address
and highest numbered event is at the lowest address. Therefore, modify
ti_am335x_xbar_write() to handle TPCC_EVT_MUX_60_63 register
accordingly.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 drivers/dma/ti-dma-crossbar.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/ti-dma-crossbar.c b/drivers/dma/ti-dma-crossbar.c
index 7df910e7c348..9272b173c746 100644
--- a/drivers/dma/ti-dma-crossbar.c
+++ b/drivers/dma/ti-dma-crossbar.c
@@ -54,7 +54,15 @@ struct ti_am335x_xbar_map {
 
 static inline void ti_am335x_xbar_write(void __iomem *iomem, int event, u8 val)
 {
-	writeb_relaxed(val, iomem + event);
+	/*
+	 * TPCC_EVT_MUX_60_63 register layout is different than the
+	 * rest, in the sense, that event 63 is mapped to lowest byte
+	 * and event 60 is mapped to highest, handle it separately.
+	 */
+	if (event >= 60 && event <= 63)
+		writeb_relaxed(val, iomem + (63 - event % 4));
+	else
+		writeb_relaxed(val, iomem + event);
 }
 
 static void ti_am335x_xbar_free(struct device *dev, void *route_data)
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki