From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751986AbdLYDQC (ORCPT ); Sun, 24 Dec 2017 22:16:02 -0500 Received: from out20-15.mail.aliyun.com ([115.124.20.15]:38639 "EHLO out20-15.mail.aliyun.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751287AbdLYDP6 (ORCPT ); Sun, 24 Dec 2017 22:15:58 -0500 X-Alimail-AntiSpam: AC=CONTINUE;BC=0.07445255|-1;CH=green;FP=0|0|0|0|0|-1|-1|-1;HT=e01e04463;MF=yong.deng@magewell.com;NM=1;PH=DS;RN=24;RT=24;SR=0;TI=SMTPD_---.9t1b2WU_1514171725; Date: Mon, 25 Dec 2017 11:15:26 +0800 From: Yong To: =?UTF-8?B?T25kxZllag==?= Jirman Cc: "Maxime Ripard" , Mauro Carvalho Chehab , Rob Herring , Mark Rutland , Chen-Yu Tsai , "David S. Miller" , Greg Kroah-Hartman , Randy Dunlap , Hans Verkuil , Stanimir Varbanov , Hugues Fruchet , Yannick Fertre , Philipp Zabel , Arnd Bergmann , Benjamin Gaignard , Ramesh Shanmugasundaram , Sakari Ailus , Rick Chang , linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com Subject: Re: [linux-sunxi] [PATCH v4 0/2] Initial Allwinner V3s CSI Support Message-Id: <20171225111526.4663f997f5d6bfc6cf157f10@magewell.com> In-Reply-To: <1513950408.841.81.camel@megous.com> References: <1513935138-35223-1-git-send-email-yong.deng@magewell.com> <1513950408.841.81.camel@megous.com> X-Mailer: Sylpheed 3.6.0 (GTK+ 2.24.30; i686-pc-mingw32) Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi, On Fri, 22 Dec 2017 14:46:48 +0100 Ondřej Jirman wrote: > Hello, > > Yong Deng píše v Pá 22. 12. 2017 v 17:32 +0800: > > This patchset add initial support for Allwinner V3s CSI. > > > > Allwinner V3s SoC have two CSI module. CSI0 is used for MIPI interface > > and CSI1 is used for parallel interface. This is not documented in > > datasheet but by testing and guess. > > > > This patchset implement a v4l2 framework driver and add a binding > > documentation for it. > > > > Currently, the driver only support the parallel interface. And has been > > tested with a BT1120 signal which generating from FPGA. The following > > fetures are not support with this patchset: > > - ISP > > - MIPI-CSI2 > > - Master clock for camera sensor > > - Power regulator for the front end IC > > > > Thanks for Ondřej Jirman's help. > > > > Changes in v4: > > * Deal with the CSI 'INNER QUEUE'. > > CSI will lookup the next dma buffer for next frame before the > > the current frame done IRQ triggered. This is not documented > > but reported by Ondřej Jirman. > > The BSP code has workaround for this too. It skip to mark the > > first buffer as frame done for VB2 and pass the second buffer > > to CSI in the first frame done ISR call. Then in second frame > > done ISR call, it mark the first buffer as frame done for VB2 > > and pass the third buffer to CSI. And so on. The bad thing is > > that the first buffer will be written twice and the first frame > > is dropped even the queued buffer is sufficient. > > So, I make some improvement here. Pass the next buffer to CSI > > just follow starting the CSI. In this case, the first frame > > will be stored in first buffer, second frame in second buffer. > > This mothed is used to avoid dropping the first frame, it > > would also drop frame when lacking of queued buffer. > > * Fix: using a wrong mbus_code when getting the supported formats > > * Change all fourcc to pixformat > > * Change some function names > > > > Changes in v3: > > * Get rid of struct sun6i_csi_ops > > * Move sun6i-csi to new directory drivers/media/platform/sunxi > > * Merge sun6i_csi.c and sun6i_csi_v3s.c into sun6i_csi.c > > * Use generic fwnode endpoints parser > > * Only support a single subdev to make things simple > > * Many complaintion fix > > > > Changes in v2: > > * Change sunxi-csi to sun6i-csi > > * Rebase to media_tree master branch > > > > Following is the 'v4l2-compliance -s -f' output, I have test this > > with both interlaced and progressive signal: > > > > # ./v4l2-compliance -s -f > > v4l2-compliance SHA : 6049ea8bd64f9d78ef87ef0c2b3dc9b5de1ca4a1 > > > > Driver Info: > > Driver name : sun6i-video > > Card type : sun6i-csi > > Bus info : platform:csi > > Driver version: 4.15.0 > > Capabilities : 0x84200001 > > Video Capture > > Streaming > > Extended Pix Format > > Device Capabilities > > Device Caps : 0x04200001 > > Video Capture > > Streaming > > Extended Pix Format > > > > Compliance test for device /dev/video0 (not using libv4l2): > > > > Required ioctls: > > test VIDIOC_QUERYCAP: OK > > > > Allow for multiple opens: > > test second video open: OK > > test VIDIOC_QUERYCAP: OK > > test VIDIOC_G/S_PRIORITY: OK > > test for unlimited opens: OK > > > > Debug ioctls: > > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > > test VIDIOC_LOG_STATUS: OK (Not Supported) > > > > Input ioctls: > > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > > test VIDIOC_ENUMAUDIO: OK (Not Supported) > > test VIDIOC_G/S/ENUMINPUT: OK > > test VIDIOC_G/S_AUDIO: OK (Not Supported) > > Inputs: 1 Audio Inputs: 0 Tuners: 0 > > > > Output ioctls: > > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > > > Input/Output configuration ioctls: > > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > > test VIDIOC_G/S_EDID: OK (Not Supported) > > > > Test input 0: > > > > Control ioctls: > > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported) > > test VIDIOC_QUERYCTRL: OK (Not Supported) > > test VIDIOC_G/S_CTRL: OK (Not Supported) > > test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported) > > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) > > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > > Standard Controls: 0 Private Controls: 0 > > I'm not sure if your driver passes control queries to the subdev. It > did not originally, and I'm not sure you picked up the change from my > version of the driver. "Not supported" here seems to indicate that it > does not. > > I'd be interested what's the recommended practice here. It sure helps > with some apps that expect to be able to modify various input controls > directly on the /dev/video# device. These are then supported out of the > box. > > It's a one-line change. See: > > https://www.kernel.org/doc/html/latest/media/kapi/v4l2-controls.html#in > heriting-controls I think this is a feature and not affect the driver's main function. I just focused on making the CSI main function to work properly in the initial version. Is this feature mandatory or most commonly used? > > > Format ioctls: > > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > > test VIDIOC_G/S_PARM: OK (Not Supported) > > test VIDIOC_G_FBUF: OK (Not Supported) > > test VIDIOC_G_FMT: OK > > test VIDIOC_TRY_FMT: OK > > test VIDIOC_S_FMT: OK > > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > > test Cropping: OK (Not Supported) > > test Composing: OK (Not Supported) > > test Scaling: OK (Not Supported) > > > > Codec ioctls: > > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > > > Buffer ioctls: > > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > > test VIDIOC_EXPBUF: OK > > > > Test input 0: > > > > Streaming ioctls: > > test read/write: OK (Not Supported) > > test MMAP: OK > > test USERPTR: OK (Not Supported) > > test DMABUF: Cannot test, specify --expbuf-device > > > > Stream using all formats: > > test MMAP for Format HM12, Frame Size 1280x720: > > Stride 1920, Field None: OK > > test MMAP for Format NV12, Frame Size 1280x720: > > Stride 1920, Field None: OK > > test MMAP for Format NV21, Frame Size 1280x720: > > Stride 1920, Field None: OK > > test MMAP for Format YU12, Frame Size 1280x720: > > Stride 1920, Field None: OK > > test MMAP for Format YV12, Frame Size 1280x720: > > Stride 1920, Field None: OK > > test MMAP for Format NV16, Frame Size 1280x720: > > Stride 2560, Field None: OK > > test MMAP for Format NV61, Frame Size 1280x720: > > Stride 2560, Field None: OK > > test MMAP for Format 422P, Frame Size 1280x720: > > Stride 2560, Field None: OK > > > > Total: 54, Succeeded: 54, Failed: 0, Warnings: 0 > > > > Yong Deng (2): > > dt-bindings: media: Add Allwinner V3s Camera Sensor Interface (CSI) > > media: V3s: Add support for Allwinner CSI. > > > > .../devicetree/bindings/media/sun6i-csi.txt | 51 ++ > > MAINTAINERS | 8 + > > drivers/media/platform/Kconfig | 1 + > > drivers/media/platform/Makefile | 2 + > > drivers/media/platform/sunxi/sun6i-csi/Kconfig | 9 + > > drivers/media/platform/sunxi/sun6i-csi/Makefile | 3 + > > drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c | 878 +++++++++++++++++++++ > > drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h | 147 ++++ > > .../media/platform/sunxi/sun6i-csi/sun6i_csi_reg.h | 203 +++++ > > .../media/platform/sunxi/sun6i-csi/sun6i_video.c | 752 ++++++++++++++++++ > > .../media/platform/sunxi/sun6i-csi/sun6i_video.h | 60 ++ > > 11 files changed, 2114 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/media/sun6i-csi.txt > > create mode 100644 drivers/media/platform/sunxi/sun6i-csi/Kconfig > > create mode 100644 drivers/media/platform/sunxi/sun6i-csi/Makefile > > create mode 100644 drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c > > create mode 100644 drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h > > create mode 100644 drivers/media/platform/sunxi/sun6i-csi/sun6i_csi_reg.h > > create mode 100644 drivers/media/platform/sunxi/sun6i-csi/sun6i_video.c > > create mode 100644 drivers/media/platform/sunxi/sun6i-csi/sun6i_video.h > > > > -- > > 1.8.3.1 > > Thanks, Yong