linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Corentin Labbe <clabbe.montjoie@gmail.com>
To: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>,
	"David S. Miller" <davem@davemloft.net>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Ofir Drang <ofir.drang@arm.com>,
	linux-kernel@vger.kernel.org, linux-crypto@vger.kernel.org,
	devel@driverdev.osuosl.org
Subject: Re: [PATCH 3/7] crypto: ccree: add ablkcipher support
Date: Thu, 11 Jan 2018 11:01:37 +0100	[thread overview]
Message-ID: <20180111100137.GA15690@Red> (raw)
In-Reply-To: <1515662239-1714-4-git-send-email-gilad@benyossef.com>

On Thu, Jan 11, 2018 at 09:17:10AM +0000, Gilad Ben-Yossef wrote:
> Add CryptoCell ablkcipher support
> 

Hello

I have some minor comments:

ablkcipher is deprecated, so you need to use skcipher instead.

> Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
> ---
>  drivers/crypto/ccree/Makefile        |    2 +-
>  drivers/crypto/ccree/cc_buffer_mgr.c |  125 ++++
>  drivers/crypto/ccree/cc_buffer_mgr.h |   10 +
>  drivers/crypto/ccree/cc_cipher.c     | 1167 ++++++++++++++++++++++++++++++++++
>  drivers/crypto/ccree/cc_cipher.h     |   74 +++
>  drivers/crypto/ccree/cc_driver.c     |   11 +
>  drivers/crypto/ccree/cc_driver.h     |    2 +
>  7 files changed, 1390 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/crypto/ccree/cc_cipher.c
>  create mode 100644 drivers/crypto/ccree/cc_cipher.h
> 
[...]
> +
> +struct tdes_keys {
> +	u8	key1[DES_KEY_SIZE];
> +	u8	key2[DES_KEY_SIZE];
> +	u8	key3[DES_KEY_SIZE];
> +};
> +
> +static const u8 zero_buff[] = {	0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
> +				0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
> +				0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
> +				0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0};
> +

This constant is used nowhere.

> +/* The function verifies that tdes keys are not weak.*/
> +static int cc_verify_3des_keys(const u8 *key, unsigned int keylen)
> +{
> +	struct tdes_keys *tdes_key = (struct tdes_keys *)key;
> +
> +	/* verify key1 != key2 and key3 != key2*/
> +	if ((memcmp((u8 *)tdes_key->key1, (u8 *)tdes_key->key2,
> +		    sizeof(tdes_key->key1)) == 0) ||
> +	    (memcmp((u8 *)tdes_key->key3, (u8 *)tdes_key->key2,
> +		    sizeof(tdes_key->key3)) == 0)) {
> +		return -ENOEXEC;
> +	}
> +
> +	return 0;
> +}

All driver testing 3des key also use des_ekey()

[...]
> +static void cc_cipher_complete(struct device *dev, void *cc_req, int err)
> +{
> +	struct ablkcipher_request *areq = (struct ablkcipher_request *)cc_req;
> +	struct scatterlist *dst = areq->dst;
> +	struct scatterlist *src = areq->src;
> +	struct blkcipher_req_ctx *req_ctx = ablkcipher_request_ctx(areq);
> +	struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
> +	unsigned int ivsize = crypto_ablkcipher_ivsize(tfm);
> +	struct ablkcipher_request *req = (struct ablkcipher_request *)areq;
> +
> +	cc_unmap_blkcipher_request(dev, req_ctx, ivsize, src, dst);
> +	kfree(req_ctx->iv);

kzfree for all stuff with IV/key

[...]
> +
> +#ifdef CRYPTO_TFM_REQ_HW_KEY
> +
> +static inline bool cc_is_hw_key(struct crypto_tfm *tfm)
> +{
> +	return (crypto_tfm_get_flags(tfm) & CRYPTO_TFM_REQ_HW_KEY);
> +}
> +
> +#else
> +
> +struct arm_hw_key_info {
> +	int hw_key1;
> +	int hw_key2;
> +};
> +
> +static inline bool cc_is_hw_key(struct crypto_tfm *tfm)
> +{
> +	return false;
> +}
> +
> +#endif /* CRYPTO_TFM_REQ_HW_KEY */

I see nowhere any use/documentation of CRYPTO_TFM_REQ_HW_KEY, so a cleaning could be done

Regards

  reply	other threads:[~2018-01-11 10:01 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-11  9:17 [PATCH 0/7] Introduce Arm TrustZone CryptoCell Gilad Ben-Yossef
2018-01-11  9:17 ` [PATCH 1/7] staging: ccree: remove ccree from staging tree Gilad Ben-Yossef
2018-01-13 13:21   ` Greg Kroah-Hartman
2018-01-18  8:39     ` Gilad Ben-Yossef
2018-01-18  9:41       ` Greg Kroah-Hartman
2018-01-11  9:17 ` [PATCH 2/7] crypto: ccree: introduce CryptoCell driver Gilad Ben-Yossef
2018-01-11  9:17 ` [PATCH 3/7] crypto: ccree: add ablkcipher support Gilad Ben-Yossef
2018-01-11 10:01   ` Corentin Labbe [this message]
2018-01-22  7:07     ` Gilad Ben-Yossef
2018-01-11 10:03   ` Stephan Mueller
2018-01-22  7:08     ` Gilad Ben-Yossef
2018-01-11  9:17 ` [PATCH 4/7] crypto: ccree: add ahash support Gilad Ben-Yossef
2018-01-11  9:17 ` [PATCH 5/7] crypto: ccree: add AEAD support Gilad Ben-Yossef
2018-01-11  9:17 ` [PATCH 6/7] crypto: ccree: add FIPS support Gilad Ben-Yossef
2018-01-11  9:17 ` [PATCH 7/7] MAINTAINERS: update ccree entry Gilad Ben-Yossef

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180111100137.GA15690@Red \
    --to=clabbe.montjoie@gmail.com \
    --cc=davem@davemloft.net \
    --cc=devel@driverdev.osuosl.org \
    --cc=gilad@benyossef.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=herbert@gondor.apana.org.au \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ofir.drang@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).