linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kai-Heng Feng <kai.heng.feng@canonical.com>
To: mathias.nyman@intel.com
Cc: gregkh@linuxfoundation.org, linux-usb@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Kai-Heng Feng <kai.heng.feng@canonical.com>
Subject: [PATCH v2] xhci: Fix front USB ports on ASUS PRIME B350M-A
Date: Tue, 20 Feb 2018 03:06:21 +0800	[thread overview]
Message-ID: <20180219190621.6632-1-kai.heng.feng@canonical.com> (raw)

When a USB device gets plugged on ASUS PRIME B350M-A's front ports, the
xHC stops working:
[  549.114587] xhci_hcd 0000:02:00.0: WARN: xHC CMD_RUN timeout
[  549.114608] suspend_common(): xhci_pci_suspend+0x0/0xc0 returns -110
[  549.114638] xhci_hcd 0000:02:00.0: can't suspend (hcd_pci_runtime_suspend returned -110)

Delay before running xHC command CMD_RUN can workaround the issue.

Use a new quirk to make the delay only targets to the affected xHC.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
---
v2: Instead of doing xHC reset and disabling D3cold, a simple delay can
workaround the issue. Now both high-speed and super-speed devices work
fine with the v2 quirk.

 drivers/usb/host/xhci-pci.c | 3 +++
 drivers/usb/host/xhci.c     | 3 +++
 drivers/usb/host/xhci.h     | 1 +
 3 files changed, 7 insertions(+)

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 6c79037876db..9a820b3cae56 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -122,6 +122,9 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info())
 		xhci->quirks |= XHCI_AMD_PLL_FIX;
 
+	if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x43bb)
+		xhci->quirks |= XHCI_SUSPEND_DELAY;
+
 	if (pdev->vendor == PCI_VENDOR_ID_AMD)
 		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 1eeb3396300f..d554bbd694d3 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -878,6 +878,9 @@ int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup)
 	clear_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
 	del_timer_sync(&xhci->shared_hcd->rh_timer);
 
+	if (xhci->quirks & XHCI_SUSPEND_DELAY)
+		usleep_range(1000, 1500);
+
 	spin_lock_irq(&xhci->lock);
 	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 96099a245c69..6f1f52f3cb40 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1825,6 +1825,7 @@ struct xhci_hcd {
 /* Reserved. It was XHCI_U2_DISABLE_WAKE */
 #define XHCI_ASMEDIA_MODIFY_FLOWCONTROL	(1 << 28)
 #define XHCI_HW_LPM_DISABLE	(1 << 29)
+#define XHCI_SUSPEND_DELAY	(1 << 30)
 
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;
-- 
2.15.1


             reply	other threads:[~2018-02-19 19:06 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-19 19:06 Kai-Heng Feng [this message]
2018-02-20  8:24 ` [PATCH v2] xhci: Fix front USB ports on ASUS PRIME B350M-A Mathias Nyman
2018-02-20 11:13   ` Kai-Heng Feng
2018-03-07  6:09     ` Kai Heng Feng
2018-03-08 13:14       ` Mathias Nyman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180219190621.6632-1-kai.heng.feng@canonical.com \
    --to=kai.heng.feng@canonical.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mathias.nyman@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).