From: Jernej Skrabec <jernej.skrabec@siol.net>
To: maxime.ripard@free-electrons.com, wens@csie.org,
airlied@linux.ie, robh+dt@kernel.org, mark.rutland@arm.com,
mturquette@baylibre.com, sboyd@kernel.org
Cc: jernej.skrabec@siol.net, dri-devel@lists.freedesktop.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
linux-sunxi@googlegroups.com
Subject: [PATCH v2 15/16] ARM: dts: sun8i: h3: Enable HDMI output on H3 boards
Date: Tue, 27 Feb 2018 23:27:00 +0100 [thread overview]
Message-ID: <20180227222701.9716-16-jernej.skrabec@siol.net> (raw)
In-Reply-To: <20180227222701.9716-1-jernej.skrabec@siol.net>
Enable HDMI output on all boards which have HDMI connector.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts | 25 ++++++++++++++++++++++
arch/arm/boot/dts/sun8i-h3-beelink-x2.dts | 25 ++++++++++++++++++++++
arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts | 25 ++++++++++++++++++++++
arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts | 25 ++++++++++++++++++++++
arch/arm/boot/dts/sun8i-h3-orangepi-2.dts | 25 ++++++++++++++++++++++
arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts | 25 ++++++++++++++++++++++
arch/arm/boot/dts/sun8i-h3-orangepi-one.dts | 24 +++++++++++++++++++++
arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 25 ++++++++++++++++++++++
8 files changed, 199 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
index 9c1bc472fb1c..30540dc8e0c5 100644
--- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
@@ -61,6 +61,17 @@
stdout-path = "serial0:115200n8";
};
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -100,6 +111,10 @@
};
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -129,6 +144,16 @@
};
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
index 870aabcbb2d8..cf1f970b0c6f 100644
--- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
@@ -61,6 +61,17 @@
stdout-path = "serial0:115200n8";
};
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
@@ -100,6 +111,10 @@
};
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -108,6 +123,16 @@
status = "okay";
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
diff --git a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts b/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts
index d0d41eb86cb4..b20a710da7bc 100644
--- a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts
+++ b/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts
@@ -23,6 +23,17 @@
stdout-path = "serial0:115200n8";
};
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
@@ -120,6 +131,10 @@
status = "okay";
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -143,6 +158,16 @@
status = "okay";
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
index c77fbca4f227..9412668bb888 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
@@ -49,6 +49,21 @@
aliases {
ethernet0 = &emac;
};
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+};
+
+&de {
+ status = "okay";
};
&ehci1 {
@@ -66,6 +81,16 @@
status = "okay";
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
index 7569bd05e249..f1fc6bdca8be 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
@@ -62,6 +62,17 @@
stdout-path = "serial0:115200n8";
};
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -114,6 +125,10 @@
status = "okay";
};
+&de {
+ status = "okay";
+};
+
&ehci1 {
status = "okay";
};
@@ -125,6 +140,16 @@
status = "okay";
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
index 2e59fd296717..476ae8e387ca 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
@@ -61,6 +61,17 @@
stdout-path = "serial0:115200n8";
};
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -91,6 +102,10 @@
};
};
+&de {
+ status = "okay";
+};
+
&ehci1 {
status = "okay";
};
@@ -99,6 +114,16 @@
status = "okay";
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
index c1a8cd93c463..3328fe583c9b 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
@@ -60,6 +60,17 @@
stdout-path = "serial0:115200n8";
};
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -90,6 +101,10 @@
};
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -102,9 +117,18 @@
phy-handle = <&int_mii_phy>;
phy-mode = "mii";
allwinner,leds-active-low;
+};
+
+&hdmi {
status = "okay";
};
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&mmc0 {
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
index 537227b85935..cea4d647ecbf 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
@@ -60,6 +60,17 @@
stdout-path = "serial0:115200n8";
};
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -98,6 +109,10 @@
status = "okay";
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -121,6 +136,16 @@
status = "okay";
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
--
2.16.2
next prev parent reply other threads:[~2018-02-27 22:29 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-27 22:26 [PATCH v2 00/16] Implement H3/H5 HDMI driver Jernej Skrabec
2018-02-27 22:26 ` [PATCH v2 01/16] clk: sunxi-ng: Add check for minimal rate to NM PLLs Jernej Skrabec
2018-02-28 7:34 ` Maxime Ripard
2018-02-28 21:55 ` Jernej Škrabec
2018-02-27 22:26 ` [PATCH v2 02/16] clk: sunxi-ng: h3: h5: Add minimal rate for video PLL Jernej Skrabec
2018-02-27 22:26 ` [PATCH v2 03/16] clk: sunxi-ng: h3: h5: Allow some clocks to set parent rate Jernej Skrabec
2018-02-27 22:26 ` [PATCH v2 04/16] clk: sunxi-ng: h3: h5: export CLK_PLL_VIDEO Jernej Skrabec
2018-02-27 22:26 ` [PATCH v2 05/16] dt-bindings: display: sun4i-drm: Add compatibles for H3 HDMI pipeline Jernej Skrabec
2018-02-27 22:26 ` [PATCH v2 06/16] drm/sun4i: Don't process LVDS if TCON doesn't support it Jernej Skrabec
2018-02-28 7:36 ` Maxime Ripard
2018-02-28 21:43 ` Jernej Škrabec
2018-03-02 8:12 ` Maxime Ripard
2018-02-27 22:26 ` [PATCH v2 07/16] drm/sun4i: Add support for H3 display engine Jernej Skrabec
2018-02-27 22:26 ` [PATCH v2 08/16] drm/sun4i: Add support for H3 mixer 0 Jernej Skrabec
2018-02-27 22:26 ` [PATCH v2 09/16] drm/sun4i: Fix polarity configuration for DW HDMI PHY Jernej Skrabec
2018-02-27 22:26 ` [PATCH v2 10/16] drm/sun4i: Add support for variants to " Jernej Skrabec
2018-02-27 22:26 ` [PATCH v2 11/16] drm/sun4i: Move and expand DW HDMI PHY register macros Jernej Skrabec
2018-02-27 22:26 ` [PATCH v2 12/16] drm/sun4i: Add support for H3 HDMI PHY variant Jernej Skrabec
2018-02-27 22:26 ` [PATCH v2 13/16] drm/sun4i: Allow building on arm64 Jernej Skrabec
2018-02-27 22:26 ` [PATCH v2 14/16] ARM: dts: sunxi: h3/h5: Add HDMI pipeline Jernej Skrabec
2018-02-27 22:27 ` Jernej Skrabec [this message]
2018-02-27 22:27 ` [PATCH v2 16/16] ARM64: dts: sun50i: h5: Enable HDMI output on H5 boards Jernej Skrabec
2018-02-28 21:23 ` [PATCH v2 00/16] Implement H3/H5 HDMI driver Jernej Škrabec
2018-03-01 8:23 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180227222701.9716-16-jernej.skrabec@siol.net \
--to=jernej.skrabec@siol.net \
--cc=airlied@linux.ie \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@free-electrons.com \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).