[PATCH v3 1/6] staging: vc04_services: Replace "firmware" node with a compatible lookup.

[PATCH v3 1/6] staging: vc04_services: Replace "firmware" node with a compatible lookup.

[Eric Anholt]

This was requested by Rob Herring in DT bindings review.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
---

v2: new patch
v3: no changes

 drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
index f5cefda49b22..8068c0308b34 100644
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
@@ -3594,7 +3594,8 @@ static int vchiq_probe(struct platform_device *pdev)
 	struct rpi_firmware *fw;
 	int err;
 
-	fw_node = of_parse_phandle(pdev->dev.of_node, "firmware", 0);
+	fw_node = of_find_compatible_node(NULL, NULL,
+					  "raspberrypi,bcm2835-firmware");
 	if (!fw_node) {
 		dev_err(&pdev->dev, "Missing firmware node\n");
 		return -ENOENT;
-- 
2.16.2

[PATCH v3 2/6] staging: vc04_services: Remove cache-line-size property (v3)

[Eric Anholt]

It's been tempting to replace this with (L1) cache_line_size(), but
that's really not what the value is about.  It's about coordinating
the condition for the pagelist fragment behavior between the two
sides.  However, the property was not accepted for the upstream DT
binding, so we have to use the firmware's fallback value.

Signed-off-by: Eric Anholt <eric@anholt.net>
---

v2: Kept the property but added documentation.
v3: Remove the DT property again, more documentation.

 .../interface/vchiq_arm/vchiq_2835_arm.c             | 20 +++++++++++---------
 .../interface/vchiq_arm/vchiq_pagelist.h             |  1 -
 2 files changed, 11 insertions(+), 10 deletions(-)

diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c
index b59ef14890aa..afdd3e944f3f 100644
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c
@@ -77,7 +77,17 @@ struct vchiq_pagelist_info {
 };
 
 static void __iomem *g_regs;
-static unsigned int g_cache_line_size = sizeof(CACHE_LINE_SIZE);
+/* This value is the size of the L2 cache lines as understood by the
+ * VPU firmware, which determines the required alignment of the
+ * offsets/sizes in pagelists.
+ *
+ * Modern VPU firmware looks for a DT "cache-line-size" property in
+ * the VCHIQ node and will overwrite it with the actual L2 cache size,
+ * which the kernel must then respect.  That property was rejected
+ * upstream, so we have to use the VPU firmware's compatibility value
+ * of 32.
+ */
+static unsigned int g_cache_line_size = 32;
 static unsigned int g_fragments_size;
 static char *g_fragments_base;
 static char *g_free_fragments;
@@ -117,14 +127,6 @@ int vchiq_platform_init(struct platform_device *pdev, VCHIQ_STATE_T *state)
 	if (err < 0)
 		return err;
 
-	err = of_property_read_u32(dev->of_node, "cache-line-size",
-				   &g_cache_line_size);
-
-	if (err) {
-		dev_err(dev, "Missing cache-line-size property\n");
-		return -ENODEV;
-	}
-
 	g_fragments_size = 2 * g_cache_line_size;
 
 	/* Allocate space for the channels in coherent memory */
diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_pagelist.h b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_pagelist.h
index a6c5f7cc78f0..bec411061554 100644
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_pagelist.h
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_pagelist.h
@@ -34,7 +34,6 @@
 #ifndef VCHIQ_PAGELIST_H
 #define VCHIQ_PAGELIST_H
 
-#define CACHE_LINE_SIZE 32
 #define PAGELIST_WRITE 0
 #define PAGELIST_READ 1
 #define PAGELIST_READ_WITH_FRAGMENTS 2
-- 
2.16.2

[PATCH v3 3/6] dt-bindings: soc: Add a binding for the Broadcom VCHIQ services. (v3)

[Eric Anholt]

The VCHIQ communication channel can be provided by BCM283x and Capri
SoCs, to communicate with the VPU-side OS services.

Signed-off-by: Eric Anholt <eric@anholt.net>
---

v2: VCHI->VCHIQ, dropped firmware property, added cache-line-size
v3: Dropped cache-line-size, s/vchi@/mailbox@/

 .../devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt   | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt

diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt
new file mode 100644
index 000000000000..8dd7b3a7de65
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt
@@ -0,0 +1,16 @@
+Broadcom VCHIQ firmware services
+
+Required properties:
+
+- compatible:	Should be "brcm,bcm2835-vchiq"
+- reg:		Physical base address and length of the doorbell register pair
+- interrupts:	The interrupt number
+		  See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
+
+Example:
+
+mailbox@7e00b840 {
+	compatible = "brcm,bcm2835-vchiq";
+	reg = <0x7e00b840 0xf>;
+	interrupts = <0 2>;
+};
-- 
2.16.2

[PATCH v3 4/6] ARM: dts: bcm2835: Add VCHIQ node to the Raspberry Pi boards. (v3)

[Eric Anholt]

The VCHIQ firmware communication channel operates in parallel with our
other mailbox-based channel.  This is the communication channel that
exposes the firmware's media decode/encode and ISP interfaces.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com> (v2)
---

v2: dropped firmware property, added cache-line-size.
v3: dropped cache-line-size, s/vchi@/mailbox@/

 arch/arm/boot/dts/bcm2835-rpi.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index e36c392a2b8f..593f58d4ac0f 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -27,6 +27,12 @@
 			firmware = <&firmware>;
 			#power-domain-cells = <1>;
 		};
+
+		mailbox@7e00b840 {
+			compatible = "brcm,bcm2835-vchiq";
+			reg = <0x7e00b840 0xf>;
+			interrupts = <0 2>;
+		};
 	};
 };
 
-- 
2.16.2

[PATCH v3 5/6] staging: vc04_services: Mark the "DT bindings" job done.

[Eric Anholt]

Now we just need to get the other drivers merged and finish the style
cleanups/garbage collecting so we can get out of staging.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
---

v2-3: no changes

 drivers/staging/vc04_services/interface/vchi/TODO | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/drivers/staging/vc04_services/interface/vchi/TODO b/drivers/staging/vc04_services/interface/vchi/TODO
index df93154b1aa6..46b20a1961a2 100644
--- a/drivers/staging/vc04_services/interface/vchi/TODO
+++ b/drivers/staging/vc04_services/interface/vchi/TODO
@@ -1,9 +1,4 @@
-1) Write a DT binding doc and get the corresponding DT node merged to
-   bcm2835.
-
-This will let the driver probe when enabled.
-
-2) Import drivers using VCHI.
+1) Import drivers using VCHI.
 
 VCHI is just a tool to let drivers talk to the firmware.  Here are
 some of the ones we want:
@@ -26,7 +21,7 @@ some of the ones we want:
   to manage these buffers as dmabufs so that we can zero-copy import
   camera images into vc4 for rendering/display.
 
-3) Garbage-collect unused code
+2) Garbage-collect unused code
 
 One of the reasons this driver wasn't upstreamed previously was that
 there's a lot code that got built that's probably unnecessary these
-- 
2.16.2

[PATCH v3 6/6] staging: vc04_services: Remove vchiq_queue_bulk_{transmit,receive}.

[Eric Anholt]

These are dead code, including in the downstream Raspberry Pi tree.

Signed-off-by: Eric Anholt <eric@anholt.net>
---

v2-3: no changes

 .../vc04_services/interface/vchiq_arm/vchiq_arm.c    | 20 --------------------
 .../vc04_services/interface/vchiq_arm/vchiq_if.h     | 10 ----------
 2 files changed, 30 deletions(-)

diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
index 8068c0308b34..24d456b0a6f0 100644
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
@@ -406,26 +406,6 @@ VCHIQ_STATUS_T vchiq_open_service(
 }
 EXPORT_SYMBOL(vchiq_open_service);
 
-VCHIQ_STATUS_T
-vchiq_queue_bulk_transmit(VCHIQ_SERVICE_HANDLE_T handle,
-	const void *data, unsigned int size, void *userdata)
-{
-	return vchiq_bulk_transfer(handle,
-		VCHI_MEM_HANDLE_INVALID, (void *)data, size, userdata,
-		VCHIQ_BULK_MODE_CALLBACK, VCHIQ_BULK_TRANSMIT);
-}
-EXPORT_SYMBOL(vchiq_queue_bulk_transmit);
-
-VCHIQ_STATUS_T
-vchiq_queue_bulk_receive(VCHIQ_SERVICE_HANDLE_T handle, void *data,
-	unsigned int size, void *userdata)
-{
-	return vchiq_bulk_transfer(handle,
-		VCHI_MEM_HANDLE_INVALID, data, size, userdata,
-		VCHIQ_BULK_MODE_CALLBACK, VCHIQ_BULK_RECEIVE);
-}
-EXPORT_SYMBOL(vchiq_queue_bulk_receive);
-
 VCHIQ_STATUS_T
 vchiq_bulk_transmit(VCHIQ_SERVICE_HANDLE_T handle, const void *data,
 	unsigned int size, void *userdata, VCHIQ_BULK_MODE_T mode)
diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_if.h b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_if.h
index 0e270852900d..e4109a83e628 100644
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_if.h
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_if.h
@@ -149,16 +149,6 @@ vchiq_queue_message(VCHIQ_SERVICE_HANDLE_T handle,
 		    size_t size);
 extern void           vchiq_release_message(VCHIQ_SERVICE_HANDLE_T service,
 	VCHIQ_HEADER_T *header);
-extern VCHIQ_STATUS_T vchiq_queue_bulk_transmit(VCHIQ_SERVICE_HANDLE_T service,
-	const void *data, unsigned int size, void *userdata);
-extern VCHIQ_STATUS_T vchiq_queue_bulk_receive(VCHIQ_SERVICE_HANDLE_T service,
-	void *data, unsigned int size, void *userdata);
-extern VCHIQ_STATUS_T vchiq_queue_bulk_transmit_handle(
-	VCHIQ_SERVICE_HANDLE_T service, VCHI_MEM_HANDLE_T handle,
-	const void *offset, unsigned int size, void *userdata);
-extern VCHIQ_STATUS_T vchiq_queue_bulk_receive_handle(
-	VCHIQ_SERVICE_HANDLE_T service, VCHI_MEM_HANDLE_T handle,
-	void *offset, unsigned int size, void *userdata);
 extern VCHIQ_STATUS_T vchiq_bulk_transmit(VCHIQ_SERVICE_HANDLE_T service,
 	const void *data, unsigned int size, void *userdata,
 	VCHIQ_BULK_MODE_T mode);
-- 
2.16.2

Re: [PATCH v3 3/6] dt-bindings: soc: Add a binding for the Broadcom VCHIQ services. (v3)

[Stefan Wahren]

Hi Eric,

> Eric Anholt <eric@anholt.net> hat am 9. März 2018 um 19:44 geschrieben:
> 
> 
> The VCHIQ communication channel can be provided by BCM283x and Capri
> SoCs, to communicate with the VPU-side OS services.
> 
> Signed-off-by: Eric Anholt <eric@anholt.net>
> ---
> 
> v2: VCHI->VCHIQ, dropped firmware property, added cache-line-size
> v3: Dropped cache-line-size, s/vchi@/mailbox@/
> 
>  .../devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt   | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt
> 
> diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt
> new file mode 100644
> index 000000000000..8dd7b3a7de65
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt
> @@ -0,0 +1,16 @@
> +Broadcom VCHIQ firmware services
> +
> +Required properties:
> +
> +- compatible:	Should be "brcm,bcm2835-vchiq"
> +- reg:		Physical base address and length of the doorbell register pair
> +- interrupts:	The interrupt number
> +		  See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
> +
> +Example:
> +
> +mailbox@7e00b840 {

just a question: do you think this is future-proof to claim the doorbell for VCHIQ?

Stefan

> +	compatible = "brcm,bcm2835-vchiq";
> +	reg = <0x7e00b840 0xf>;
> +	interrupts = <0 2>;
> +};
> -- 
> 2.16.2
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 3/6] dt-bindings: soc: Add a binding for the Broadcom VCHIQ services. (v3)

[Eric Anholt]

[-- Attachment #1: Type: text/plain, Size: 1706 bytes --]

Stefan Wahren <stefan.wahren@i2se.com> writes:

> Hi Eric,
>
>> Eric Anholt <eric@anholt.net> hat am 9. März 2018 um 19:44 geschrieben:
>> 
>> 
>> The VCHIQ communication channel can be provided by BCM283x and Capri
>> SoCs, to communicate with the VPU-side OS services.
>> 
>> Signed-off-by: Eric Anholt <eric@anholt.net>
>> ---
>> 
>> v2: VCHI->VCHIQ, dropped firmware property, added cache-line-size
>> v3: Dropped cache-line-size, s/vchi@/mailbox@/
>> 
>>  .../devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt   | 16 ++++++++++++++++
>>  1 file changed, 16 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt
>> 
>> diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt
>> new file mode 100644
>> index 000000000000..8dd7b3a7de65
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt
>> @@ -0,0 +1,16 @@
>> +Broadcom VCHIQ firmware services
>> +
>> +Required properties:
>> +
>> +- compatible:	Should be "brcm,bcm2835-vchiq"
>> +- reg:		Physical base address and length of the doorbell register pair
>> +- interrupts:	The interrupt number
>> +		  See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
>> +
>> +Example:
>> +
>> +mailbox@7e00b840 {
>
> just a question: do you think this is future-proof to claim the doorbell for VCHIQ?

There are 4 and this is the only one used so far, so it seems terribly
unlikely to get reused.  If the firmware did for some reason decide to
reuse it for something else, they'd surely go override the DT like they
have in the past.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]

Re: [PATCH v3 3/6] dt-bindings: soc: Add a binding for the Broadcom VCHIQ services. (v3)

[Rob Herring]

On Fri, Mar 09, 2018 at 10:44:14AM -0800, Eric Anholt wrote:
> The VCHIQ communication channel can be provided by BCM283x and Capri
> SoCs, to communicate with the VPU-side OS services.
> 
> Signed-off-by: Eric Anholt <eric@anholt.net>
> ---
> 
> v2: VCHI->VCHIQ, dropped firmware property, added cache-line-size
> v3: Dropped cache-line-size, s/vchi@/mailbox@/
> 
>  .../devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt   | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt

Reviewed-by: Rob Herring <robh@kernel.org>