LKML Archive on lore.kernel.org
 help / Atom feed
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: James Hogan <jhogan@kernel.org>, Ralf Baechle <ralf@linux-mips.org>
Cc: Allan Nielsen <Allan.Nielsen@microsemi.com>,
	linux-mips@linux-mips.org, linux-kernel@vger.kernel.org,
	Alexandre Belloni <alexandre.belloni@bootlin.com>
Subject: [PATCH v6 0/6] MIPS: add support for Microsemi MIPS SoCs
Date: Tue, 20 Mar 2018 14:07:55 +0100
Message-ID: <20180320130801.9247-1-alexandre.belloni@bootlin.com> (raw)

Hi,

This patch series adds initial support for the Microsemi MIPS SoCs. It
is currently focusing on the Microsemi Ocelot (VSC7513, VSC7514).

Changes in v6:
 - Fixup SPDX identifiers
 - remove unit-address for cpuintc
 - add unit-address for ahb
 - remove CONFIG_32BIT requirement (implied by CONFIG_CPU_MIPS32_R2)
 - Add TLB entry lookup provided by James
 - Readd vendor prefix addition


Alexandre Belloni (6):
  dt-bindings: Add vendor prefix for Microsemi Corporation
  dt-bindings: mips: Add bindings for Microsemi SoCs
  MIPS: mscc: add ocelot dtsi
  MIPS: mscc: add ocelot PCB123 device tree
  MIPS: generic: Add support for Microsemi Ocelot
  MAINTAINERS: Add entry for Microsemi MIPS SoCs

 Documentation/devicetree/bindings/mips/mscc.txt    |  43 ++++++++
 .../devicetree/bindings/vendor-prefixes.txt        |   1 +
 MAINTAINERS                                        |   9 ++
 arch/mips/Makefile                                 |   4 +
 arch/mips/boot/dts/Makefile                        |   1 +
 arch/mips/boot/dts/mscc/Makefile                   |   3 +
 arch/mips/boot/dts/mscc/ocelot.dtsi                | 117 +++++++++++++++++++++
 arch/mips/boot/dts/mscc/ocelot_pcb123.dts          |  27 +++++
 arch/mips/configs/generic/board-ocelot.config      |  35 ++++++
 arch/mips/generic/Kconfig                          |  16 +++
 arch/mips/generic/Makefile                         |   1 +
 arch/mips/generic/board-ocelot.c                   |  78 ++++++++++++++
 12 files changed, 335 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mips/mscc.txt
 create mode 100644 arch/mips/boot/dts/mscc/Makefile
 create mode 100644 arch/mips/boot/dts/mscc/ocelot.dtsi
 create mode 100644 arch/mips/boot/dts/mscc/ocelot_pcb123.dts
 create mode 100644 arch/mips/configs/generic/board-ocelot.config
 create mode 100644 arch/mips/generic/board-ocelot.c

-- 
2.16.2

             reply index

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-20 13:07 Alexandre Belloni [this message]
2018-03-20 13:07 ` [PATCH v6 1/6] dt-bindings: Add vendor prefix for Microsemi Corporation Alexandre Belloni
2018-03-20 13:07 ` [PATCH v6 2/6] dt-bindings: mips: Add bindings for Microsemi SoCs Alexandre Belloni
2018-03-20 13:07 ` [PATCH v6 3/6] MIPS: mscc: add ocelot dtsi Alexandre Belloni
2018-03-20 13:07 ` [PATCH v6 4/6] MIPS: mscc: add ocelot PCB123 device tree Alexandre Belloni
2018-03-20 13:08 ` [PATCH v6 5/6] MIPS: generic: Add support for Microsemi Ocelot Alexandre Belloni
2018-03-20 13:08 ` [PATCH v6 6/6] MAINTAINERS: Add entry for Microsemi MIPS SoCs Alexandre Belloni
2018-03-21 22:55 ` [PATCH v6 0/6] MIPS: add support " James Hogan

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180320130801.9247-1-alexandre.belloni@bootlin.com \
    --to=alexandre.belloni@bootlin.com \
    --cc=Allan.Nielsen@microsemi.com \
    --cc=jhogan@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@linux-mips.org \
    --cc=ralf@linux-mips.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org linux-kernel@archiver.kernel.org
	public-inbox-index lkml


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox