[PATCH v6 0/6] MIPS: add support for Microsemi MIPS SoCs

[PATCH v6 0/6] MIPS: add support for Microsemi MIPS SoCs

[Alexandre Belloni]

Hi,

This patch series adds initial support for the Microsemi MIPS SoCs. It
is currently focusing on the Microsemi Ocelot (VSC7513, VSC7514).

Changes in v6:
 - Fixup SPDX identifiers
 - remove unit-address for cpuintc
 - add unit-address for ahb
 - remove CONFIG_32BIT requirement (implied by CONFIG_CPU_MIPS32_R2)
 - Add TLB entry lookup provided by James
 - Readd vendor prefix addition


Alexandre Belloni (6):
  dt-bindings: Add vendor prefix for Microsemi Corporation
  dt-bindings: mips: Add bindings for Microsemi SoCs
  MIPS: mscc: add ocelot dtsi
  MIPS: mscc: add ocelot PCB123 device tree
  MIPS: generic: Add support for Microsemi Ocelot
  MAINTAINERS: Add entry for Microsemi MIPS SoCs

 Documentation/devicetree/bindings/mips/mscc.txt    |  43 ++++++++
 .../devicetree/bindings/vendor-prefixes.txt        |   1 +
 MAINTAINERS                                        |   9 ++
 arch/mips/Makefile                                 |   4 +
 arch/mips/boot/dts/Makefile                        |   1 +
 arch/mips/boot/dts/mscc/Makefile                   |   3 +
 arch/mips/boot/dts/mscc/ocelot.dtsi                | 117 +++++++++++++++++++++
 arch/mips/boot/dts/mscc/ocelot_pcb123.dts          |  27 +++++
 arch/mips/configs/generic/board-ocelot.config      |  35 ++++++
 arch/mips/generic/Kconfig                          |  16 +++
 arch/mips/generic/Makefile                         |   1 +
 arch/mips/generic/board-ocelot.c                   |  78 ++++++++++++++
 12 files changed, 335 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mips/mscc.txt
 create mode 100644 arch/mips/boot/dts/mscc/Makefile
 create mode 100644 arch/mips/boot/dts/mscc/ocelot.dtsi
 create mode 100644 arch/mips/boot/dts/mscc/ocelot_pcb123.dts
 create mode 100644 arch/mips/configs/generic/board-ocelot.config
 create mode 100644 arch/mips/generic/board-ocelot.c

-- 
2.16.2

[PATCH v6 1/6] dt-bindings: Add vendor prefix for Microsemi Corporation

[Alexandre Belloni]

Microsemi Corporation provides semiconductor and system solutions for
aerospace & defense, communications, data center and industrial markets.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index ae850d6c0ad3..ffc959ef53e9 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -224,6 +224,7 @@ motorola	Motorola, Inc.
 moxa	Moxa Inc.
 mpl	MPL AG
 mqmaker	mqmaker Inc.
+mscc	Microsemi Corporation
 msi	Micro-Star International Co. Ltd.
 mti	Imagination Technologies Ltd. (formerly MIPS Technologies Inc.)
 multi-inno	Multi-Inno Technology Co.,Ltd
-- 
2.16.2

[PATCH v6 2/6] dt-bindings: mips: Add bindings for Microsemi SoCs

[Alexandre Belloni]

Add bindings for Microsemi SoCs. Currently only Ocelot is supported.

Reviewed-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
 Documentation/devicetree/bindings/mips/mscc.txt | 43 +++++++++++++++++++++++++
 1 file changed, 43 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mips/mscc.txt

diff --git a/Documentation/devicetree/bindings/mips/mscc.txt b/Documentation/devicetree/bindings/mips/mscc.txt
new file mode 100644
index 000000000000..ae15ec333542
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/mscc.txt
@@ -0,0 +1,43 @@
+* Microsemi MIPS CPUs
+
+Boards with a SoC of the Microsemi MIPS family shall have the following
+properties:
+
+Required properties:
+- compatible: "mscc,ocelot"
+
+
+* Other peripherals:
+
+o CPU chip regs:
+
+The SoC has a few registers (DEVCPU_GCB:CHIP_REGS) handling miscellaneous
+functionalities: chip ID, general purpose register for software use, reset
+controller, hardware status and configuration, efuses.
+
+Required properties:
+- compatible: Should be "mscc,ocelot-chip-regs", "simple-mfd", "syscon"
+- reg : Should contain registers location and length
+
+Example:
+	syscon@71070000 {
+		compatible = "mscc,ocelot-chip-regs", "simple-mfd", "syscon";
+		reg = <0x71070000 0x1c>;
+	};
+
+
+o CPU system control:
+
+The SoC has a few registers (ICPU_CFG:CPU_SYSTEM_CTRL) handling configuration of
+the CPU: 8 general purpose registers, reset control, CPU en/disabling, CPU
+endianness, CPU bus control, CPU status.
+
+Required properties:
+- compatible: Should be "mscc,ocelot-cpu-syscon", "syscon"
+- reg : Should contain registers location and length
+
+Example:
+	syscon@70000000 {
+		compatible = "mscc,ocelot-cpu-syscon", "syscon";
+		reg = <0x70000000 0x2c>;
+	};
-- 
2.16.2

[PATCH v6 3/6] MIPS: mscc: add ocelot dtsi

[Alexandre Belloni]

Add a device tree include file for the Microsemi Ocelot SoC.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
 arch/mips/boot/dts/Makefile         |   1 +
 arch/mips/boot/dts/mscc/Makefile    |   1 +
 arch/mips/boot/dts/mscc/ocelot.dtsi | 117 ++++++++++++++++++++++++++++++++++++
 3 files changed, 119 insertions(+)
 create mode 100644 arch/mips/boot/dts/mscc/Makefile
 create mode 100644 arch/mips/boot/dts/mscc/ocelot.dtsi

diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
index e2c6f131c8eb..1e79cab8e269 100644
--- a/arch/mips/boot/dts/Makefile
+++ b/arch/mips/boot/dts/Makefile
@@ -4,6 +4,7 @@ subdir-y	+= cavium-octeon
 subdir-y	+= img
 subdir-y	+= ingenic
 subdir-y	+= lantiq
+subdir-y	+= mscc
 subdir-y	+= mti
 subdir-y	+= netlogic
 subdir-y	+= ni
diff --git a/arch/mips/boot/dts/mscc/Makefile b/arch/mips/boot/dts/mscc/Makefile
new file mode 100644
index 000000000000..dd08e63a10ba
--- /dev/null
+++ b/arch/mips/boot/dts/mscc/Makefile
@@ -0,0 +1 @@
+obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))
diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi
new file mode 100644
index 000000000000..dd239cab2f9d
--- /dev/null
+++ b/arch/mips/boot/dts/mscc/ocelot.dtsi
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2017 Microsemi Corporation */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "mscc,ocelot";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "mips,mips24KEc";
+			device_type = "cpu";
+			clocks = <&cpu_clk>;
+			reg = <0>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	cpuintc: interrupt-controller {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	cpu_clk: cpu-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <500000000>;
+	};
+
+	ahb_clk: ahb-clk {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clocks = <&cpu_clk>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	ahb@70000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x70000000 0x2000000>;
+
+		interrupt-parent = <&intc>;
+
+		cpu_ctrl: syscon@0 {
+			compatible = "mscc,ocelot-cpu-syscon", "syscon";
+			reg = <0x0 0x2c>;
+		};
+
+		intc: interrupt-controller@70 {
+			compatible = "mscc,ocelot-icpu-intr";
+			reg = <0x70 0x70>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+		};
+
+		uart0: serial@100000 {
+			pinctrl-0 = <&uart_pins>;
+			pinctrl-names = "default";
+			compatible = "ns16550a";
+			reg = <0x100000 0x20>;
+			interrupts = <6>;
+			clocks = <&ahb_clk>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+
+			status = "disabled";
+		};
+
+		uart2: serial@100800 {
+			pinctrl-0 = <&uart2_pins>;
+			pinctrl-names = "default";
+			compatible = "ns16550a";
+			reg = <0x100800 0x20>;
+			interrupts = <7>;
+			clocks = <&ahb_clk>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+
+			status = "disabled";
+		};
+
+		reset@1070008 {
+			compatible = "mscc,ocelot-chip-reset";
+			reg = <0x1070008 0x4>;
+		};
+
+		gpio: pinctrl@1070034 {
+			compatible = "mscc,ocelot-pinctrl";
+			reg = <0x1070034 0x68>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&gpio 0 0 22>;
+
+			uart_pins: uart-pins {
+				pins = "GPIO_6", "GPIO_7";
+				function = "uart";
+			};
+
+			uart2_pins: uart2-pins {
+				pins = "GPIO_12", "GPIO_13";
+				function = "uart2";
+			};
+		};
+	};
+};
-- 
2.16.2

[PATCH v6 4/6] MIPS: mscc: add ocelot PCB123 device tree

[Alexandre Belloni]

Add a device tree for the Microsemi Ocelot PCB123 evaluation board.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
 arch/mips/boot/dts/mscc/Makefile          |  2 ++
 arch/mips/boot/dts/mscc/ocelot_pcb123.dts | 27 +++++++++++++++++++++++++++
 2 files changed, 29 insertions(+)
 create mode 100644 arch/mips/boot/dts/mscc/ocelot_pcb123.dts

diff --git a/arch/mips/boot/dts/mscc/Makefile b/arch/mips/boot/dts/mscc/Makefile
index dd08e63a10ba..c51164537c02 100644
--- a/arch/mips/boot/dts/mscc/Makefile
+++ b/arch/mips/boot/dts/mscc/Makefile
@@ -1 +1,3 @@
+dtb-$(CONFIG_LEGACY_BOARD_OCELOT)	+= ocelot_pcb123.dtb
+
 obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))
diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb123.dts b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
new file mode 100644
index 000000000000..29d6414f8886
--- /dev/null
+++ b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2017 Microsemi Corporation */
+
+/dts-v1/;
+
+#include "ocelot.dtsi"
+
+/ {
+	compatible = "mscc,ocelot-pcb123", "mscc,ocelot";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0e000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
-- 
2.16.2

[PATCH v6 5/6] MIPS: generic: Add support for Microsemi Ocelot

[Alexandre Belloni]

Introduce support for the MIPS based Microsemi Ocelot SoCs.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
 arch/mips/Makefile                            |  4 ++
 arch/mips/configs/generic/board-ocelot.config | 35 ++++++++++++
 arch/mips/generic/Kconfig                     | 16 ++++++
 arch/mips/generic/Makefile                    |  1 +
 arch/mips/generic/board-ocelot.c              | 78 +++++++++++++++++++++++++++
 5 files changed, 134 insertions(+)
 create mode 100644 arch/mips/configs/generic/board-ocelot.config
 create mode 100644 arch/mips/generic/board-ocelot.c

diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index d1ca839c3981..d2882244cf1f 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -543,6 +543,10 @@ generic_defconfig:
 # now that the boards have been converted to use the generic kernel they are
 # wrappers around the generic rules above.
 #
+.PHONY: ocelot_defconfig
+ocelot_defconfig:
+	$(Q)$(MAKE) -f $(srctree)/Makefile 32r2el_defconfig BOARDS=ocelot
+
 .PHONY: sead3_defconfig
 sead3_defconfig:
 	$(Q)$(MAKE) -f $(srctree)/Makefile 32r2el_defconfig BOARDS=sead-3
diff --git a/arch/mips/configs/generic/board-ocelot.config b/arch/mips/configs/generic/board-ocelot.config
new file mode 100644
index 000000000000..aa815761d85e
--- /dev/null
+++ b/arch/mips/configs/generic/board-ocelot.config
@@ -0,0 +1,35 @@
+# require CONFIG_CPU_MIPS32_R2=y
+
+CONFIG_LEGACY_BOARD_OCELOT=y
+
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_PLATFORM=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_UBI=y
+
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+
+CONFIG_GPIO_SYSFS=y
+
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+
+CONFIG_SPI=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_DESIGNWARE=y
+CONFIG_SPI_SPIDEV=y
+
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_OCELOT_RESET=y
+
+CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/mips/generic/Kconfig b/arch/mips/generic/Kconfig
index 2ff3b17bfab1..ba9b2c8cce68 100644
--- a/arch/mips/generic/Kconfig
+++ b/arch/mips/generic/Kconfig
@@ -27,6 +27,22 @@ config LEGACY_BOARD_SEAD3
 	  Enable this to include support for booting on MIPS SEAD-3 FPGA-based
 	  development boards, which boot using a legacy boot protocol.
 
+comment "MSCC Ocelot doesn't work with SEAD3 enabled"
+	depends on LEGACY_BOARD_SEAD3
+
+config LEGACY_BOARD_OCELOT
+	bool "Support MSCC Ocelot boards"
+	depends on LEGACY_BOARD_SEAD3=n
+	select LEGACY_BOARDS
+	select MSCC_OCELOT
+
+config MSCC_OCELOT
+	bool
+	select GPIOLIB
+	select MSCC_OCELOT_IRQ
+	select SYS_HAS_EARLY_PRINTK
+	select USE_GENERIC_EARLY_PRINTK_8250
+
 comment "FIT/UHI Boards"
 
 config FIT_IMAGE_FDT_BOSTON
diff --git a/arch/mips/generic/Makefile b/arch/mips/generic/Makefile
index 5c31e0c4697d..d03a36f869a4 100644
--- a/arch/mips/generic/Makefile
+++ b/arch/mips/generic/Makefile
@@ -14,5 +14,6 @@ obj-y += proc.o
 
 obj-$(CONFIG_YAMON_DT_SHIM)		+= yamon-dt.o
 obj-$(CONFIG_LEGACY_BOARD_SEAD3)	+= board-sead3.o
+obj-$(CONFIG_LEGACY_BOARD_OCELOT)	+= board-ocelot.o
 obj-$(CONFIG_KEXEC)			+= kexec.o
 obj-$(CONFIG_VIRT_BOARD_RANCHU)		+= board-ranchu.o
diff --git a/arch/mips/generic/board-ocelot.c b/arch/mips/generic/board-ocelot.c
new file mode 100644
index 000000000000..06d92fb37769
--- /dev/null
+++ b/arch/mips/generic/board-ocelot.c
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Microsemi MIPS SoC support
+ *
+ * Copyright (c) 2017 Microsemi Corporation
+ */
+#include <asm/machine.h>
+#include <asm/prom.h>
+
+#define DEVCPU_GCB_CHIP_REGS_CHIP_ID	0x71070000
+#define CHIP_ID_PART_ID			GENMASK(27, 12)
+
+#define OCELOT_PART_ID			(0x7514 << 12)
+
+#define UART_UART			0x70100000
+
+static __init bool ocelot_detect(void)
+{
+	u32 rev;
+	int idx;
+
+	/* Look for the TLB entry set up by redboot before trying to use it */
+	write_c0_entryhi(DEVCPU_GCB_CHIP_REGS_CHIP_ID);
+	mtc0_tlbw_hazard();
+	tlb_probe();
+	tlb_probe_hazard();
+	idx = read_c0_index();
+	if (idx < 0)
+		return 0;
+
+	/* A TLB entry exists, lets assume its usable and check the CHIP ID */
+	rev = __raw_readl((void __iomem *)DEVCPU_GCB_CHIP_REGS_CHIP_ID);
+
+	if ((rev & CHIP_ID_PART_ID) != OCELOT_PART_ID)
+		return 0;
+
+	/* Copy command line from bootloader early for Initrd detection */
+	if (fw_arg0 < 10 && (fw_arg1 & 0xFFF00000) == 0x80000000) {
+		unsigned int prom_argc = fw_arg0;
+		const char **prom_argv = (const char **)fw_arg1;
+
+		if (prom_argc > 1 && strlen(prom_argv[1]) > 0)
+			/* ignore all built-in args if any f/w args given */
+			strcpy(arcs_cmdline, prom_argv[1]);
+	}
+
+	return 1;
+}
+
+static void __init ocelot_earlyprintk_init(void)
+{
+	void __iomem *uart_base;
+
+	uart_base = ioremap_nocache(UART_UART, 0x20);
+	setup_8250_early_printk_port((unsigned long)uart_base, 2, 50000);
+}
+
+static void __init ocelot_late_init(void)
+{
+	ocelot_earlyprintk_init();
+}
+
+static __init const void *ocelot_fixup_fdt(const void *fdt,
+					   const void *match_data)
+{
+	/* This has to be done so late because ioremap needs to work */
+	late_time_init = ocelot_late_init;
+
+	return fdt;
+}
+
+extern char __dtb_ocelot_pcb123_begin[];
+
+MIPS_MACHINE(ocelot) = {
+	.fdt = __dtb_ocelot_pcb123_begin,
+	.fixup_fdt = ocelot_fixup_fdt,
+	.detect = ocelot_detect,
+};
-- 
2.16.2

[PATCH v6 6/6] MAINTAINERS: Add entry for Microsemi MIPS SoCs

[Alexandre Belloni]

Add myself as a maintainer for the Microsemi MIPS SoCs.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
 MAINTAINERS | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 3bdc260e36b7..14ce8b290fea 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9156,6 +9156,15 @@ S:	Maintained
 F:	drivers/usb/misc/usb251xb.c
 F:	Documentation/devicetree/bindings/usb/usb251xb.txt
 
+MICROSEMI MIPS SOCS
+M:	Alexandre Belloni <alexandre.belloni@bootlin.com>
+L:	linux-mips@linux-mips.org
+S:	Maintained
+F:	arch/mips/generic/board-ocelot.c
+F:	arch/mips/configs/generic/board-ocelot.config
+F:	arch/mips/boot/dts/mscc/
+F:	Documentation/devicetree/bindings/mips/mscc.txt
+
 MICROSEMI SMART ARRAY SMARTPQI DRIVER (smartpqi)
 M:	Don Brace <don.brace@microsemi.com>
 L:	esc.storagedev@microsemi.com
-- 
2.16.2

Re: [PATCH v6 0/6] MIPS: add support for Microsemi MIPS SoCs

[James Hogan]

[-- Attachment #1: Type: text/plain, Size: 912 bytes --]

On Tue, Mar 20, 2018 at 02:07:55PM +0100, Alexandre Belloni wrote:
> Hi,
> 
> This patch series adds initial support for the Microsemi MIPS SoCs. It
> is currently focusing on the Microsemi Ocelot (VSC7513, VSC7514).
> 
> Changes in v6:
>  - Fixup SPDX identifiers
>  - remove unit-address for cpuintc
>  - add unit-address for ahb
>  - remove CONFIG_32BIT requirement (implied by CONFIG_CPU_MIPS32_R2)
>  - Add TLB entry lookup provided by James
>  - Readd vendor prefix addition
> 
> 
> Alexandre Belloni (6):
>   dt-bindings: Add vendor prefix for Microsemi Corporation
>   dt-bindings: mips: Add bindings for Microsemi SoCs
>   MIPS: mscc: add ocelot dtsi
>   MIPS: mscc: add ocelot PCB123 device tree
>   MIPS: generic: Add support for Microsemi Ocelot
>   MAINTAINERS: Add entry for Microsemi MIPS SoCs

Thanks Alexandre, I've now applied these 6 patches for 4.17.

Cheers
James

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]