From: Jeffy Chen <jeffy.chen@rock-chips.com>
To: linux-kernel@vger.kernel.org
Cc: jcliang@chromium.org, robin.murphy@arm.com, xxm@rock-chips.com,
tfiga@chromium.org, Jeffy Chen <jeffy.chen@rock-chips.com>,
Heiko Stuebner <heiko@sntech.de>,
linux-rockchip@lists.infradead.org,
iommu@lists.linux-foundation.org, Joerg Roedel <joro@8bytes.org>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 05/14] iommu/rockchip: Use iopoll helpers to wait for hardware
Date: Fri, 23 Mar 2018 15:38:05 +0800 [thread overview]
Message-ID: <20180323073814.5802-6-jeffy.chen@rock-chips.com> (raw)
In-Reply-To: <20180323073814.5802-1-jeffy.chen@rock-chips.com>
From: Tomasz Figa <tfiga@chromium.org>
This patch converts the rockchip-iommu driver to use the in-kernel
iopoll helpers to wait for certain status bits to change in registers
instead of an open-coded custom macro.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
---
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5:
Use RK_MMU_POLL_PERIOD_US instead of 100.
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/iommu/rockchip-iommu.c | 75 ++++++++++++++++++++++--------------------
1 file changed, 39 insertions(+), 36 deletions(-)
diff --git a/drivers/iommu/rockchip-iommu.c b/drivers/iommu/rockchip-iommu.c
index 5cbd5ceeb039..7130d92ff79c 100644
--- a/drivers/iommu/rockchip-iommu.c
+++ b/drivers/iommu/rockchip-iommu.c
@@ -13,7 +13,7 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/iommu.h>
-#include <linux/jiffies.h>
+#include <linux/iopoll.h>
#include <linux/list.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -36,7 +36,10 @@
#define RK_MMU_AUTO_GATING 0x24
#define DTE_ADDR_DUMMY 0xCAFEBABE
-#define FORCE_RESET_TIMEOUT 100 /* ms */
+
+#define RK_MMU_POLL_PERIOD_US 100
+#define RK_MMU_FORCE_RESET_TIMEOUT_US 100000
+#define RK_MMU_POLL_TIMEOUT_US 1000
/* RK_MMU_STATUS fields */
#define RK_MMU_STATUS_PAGING_ENABLED BIT(0)
@@ -73,8 +76,6 @@
*/
#define RK_IOMMU_PGSIZE_BITMAP 0x007ff000
-#define IOMMU_REG_POLL_COUNT_FAST 1000
-
struct rk_iommu_domain {
struct list_head iommus;
struct platform_device *pdev;
@@ -109,27 +110,6 @@ static struct rk_iommu_domain *to_rk_domain(struct iommu_domain *dom)
return container_of(dom, struct rk_iommu_domain, domain);
}
-/**
- * Inspired by _wait_for in intel_drv.h
- * This is NOT safe for use in interrupt context.
- *
- * Note that it's important that we check the condition again after having
- * timed out, since the timeout could be due to preemption or similar and
- * we've never had a chance to check the condition before the timeout.
- */
-#define rk_wait_for(COND, MS) ({ \
- unsigned long timeout__ = jiffies + msecs_to_jiffies(MS) + 1; \
- int ret__ = 0; \
- while (!(COND)) { \
- if (time_after(jiffies, timeout__)) { \
- ret__ = (COND) ? 0 : -ETIMEDOUT; \
- break; \
- } \
- usleep_range(50, 100); \
- } \
- ret__; \
-})
-
/*
* The Rockchip rk3288 iommu uses a 2-level page table.
* The first level is the "Directory Table" (DT).
@@ -333,9 +313,21 @@ static bool rk_iommu_is_paging_enabled(struct rk_iommu *iommu)
return enable;
}
+static bool rk_iommu_is_reset_done(struct rk_iommu *iommu)
+{
+ bool done = true;
+ int i;
+
+ for (i = 0; i < iommu->num_mmu; i++)
+ done &= rk_iommu_read(iommu->bases[i], RK_MMU_DTE_ADDR) == 0;
+
+ return done;
+}
+
static int rk_iommu_enable_stall(struct rk_iommu *iommu)
{
int ret, i;
+ bool val;
if (rk_iommu_is_stall_active(iommu))
return 0;
@@ -346,7 +338,9 @@ static int rk_iommu_enable_stall(struct rk_iommu *iommu)
rk_iommu_command(iommu, RK_MMU_CMD_ENABLE_STALL);
- ret = rk_wait_for(rk_iommu_is_stall_active(iommu), 1);
+ ret = readx_poll_timeout(rk_iommu_is_stall_active, iommu, val,
+ val, RK_MMU_POLL_PERIOD_US,
+ RK_MMU_POLL_TIMEOUT_US);
if (ret)
for (i = 0; i < iommu->num_mmu; i++)
dev_err(iommu->dev, "Enable stall request timed out, status: %#08x\n",
@@ -358,13 +352,16 @@ static int rk_iommu_enable_stall(struct rk_iommu *iommu)
static int rk_iommu_disable_stall(struct rk_iommu *iommu)
{
int ret, i;
+ bool val;
if (!rk_iommu_is_stall_active(iommu))
return 0;
rk_iommu_command(iommu, RK_MMU_CMD_DISABLE_STALL);
- ret = rk_wait_for(!rk_iommu_is_stall_active(iommu), 1);
+ ret = readx_poll_timeout(rk_iommu_is_stall_active, iommu, val,
+ !val, RK_MMU_POLL_PERIOD_US,
+ RK_MMU_POLL_TIMEOUT_US);
if (ret)
for (i = 0; i < iommu->num_mmu; i++)
dev_err(iommu->dev, "Disable stall request timed out, status: %#08x\n",
@@ -376,13 +373,16 @@ static int rk_iommu_disable_stall(struct rk_iommu *iommu)
static int rk_iommu_enable_paging(struct rk_iommu *iommu)
{
int ret, i;
+ bool val;
if (rk_iommu_is_paging_enabled(iommu))
return 0;
rk_iommu_command(iommu, RK_MMU_CMD_ENABLE_PAGING);
- ret = rk_wait_for(rk_iommu_is_paging_enabled(iommu), 1);
+ ret = readx_poll_timeout(rk_iommu_is_paging_enabled, iommu, val,
+ val, RK_MMU_POLL_PERIOD_US,
+ RK_MMU_POLL_TIMEOUT_US);
if (ret)
for (i = 0; i < iommu->num_mmu; i++)
dev_err(iommu->dev, "Enable paging request timed out, status: %#08x\n",
@@ -394,13 +394,16 @@ static int rk_iommu_enable_paging(struct rk_iommu *iommu)
static int rk_iommu_disable_paging(struct rk_iommu *iommu)
{
int ret, i;
+ bool val;
if (!rk_iommu_is_paging_enabled(iommu))
return 0;
rk_iommu_command(iommu, RK_MMU_CMD_DISABLE_PAGING);
- ret = rk_wait_for(!rk_iommu_is_paging_enabled(iommu), 1);
+ ret = readx_poll_timeout(rk_iommu_is_paging_enabled, iommu, val,
+ !val, RK_MMU_POLL_PERIOD_US,
+ RK_MMU_POLL_TIMEOUT_US);
if (ret)
for (i = 0; i < iommu->num_mmu; i++)
dev_err(iommu->dev, "Disable paging request timed out, status: %#08x\n",
@@ -413,6 +416,7 @@ static int rk_iommu_force_reset(struct rk_iommu *iommu)
{
int ret, i;
u32 dte_addr;
+ bool val;
if (iommu->reset_disabled)
return 0;
@@ -433,13 +437,12 @@ static int rk_iommu_force_reset(struct rk_iommu *iommu)
rk_iommu_command(iommu, RK_MMU_CMD_FORCE_RESET);
- for (i = 0; i < iommu->num_mmu; i++) {
- ret = rk_wait_for(rk_iommu_read(iommu->bases[i], RK_MMU_DTE_ADDR) == 0x00000000,
- FORCE_RESET_TIMEOUT);
- if (ret) {
- dev_err(iommu->dev, "FORCE_RESET command timed out\n");
- return ret;
- }
+ ret = readx_poll_timeout(rk_iommu_is_reset_done, iommu, val,
+ val, RK_MMU_FORCE_RESET_TIMEOUT_US,
+ RK_MMU_POLL_TIMEOUT_US);
+ if (ret) {
+ dev_err(iommu->dev, "FORCE_RESET command timed out\n");
+ return ret;
}
return 0;
--
2.11.0
next prev parent reply other threads:[~2018-03-23 7:39 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-23 7:38 [PATCH v8 00/14] iommu/rockchip: Use OF_IOMMU Jeffy Chen
2018-03-23 7:38 ` [PATCH v8 01/14] iommu/rockchip: Prohibit unbind and remove Jeffy Chen
2018-03-23 7:38 ` [PATCH v8 02/14] iommu/rockchip: Fix error handling in probe Jeffy Chen
2018-03-23 7:38 ` [PATCH v8 03/14] iommu/rockchip: Request irqs in rk_iommu_probe() Jeffy Chen
2018-03-23 7:38 ` [PATCH v8 04/14] iommu/rockchip: Fix error handling in attach Jeffy Chen
2018-03-23 7:38 ` Jeffy Chen [this message]
2018-03-23 7:38 ` [PATCH v8 06/14] iommu/rockchip: Fix TLB flush of secondary IOMMUs Jeffy Chen
2018-03-23 7:38 ` [PATCH v8 07/14] ARM: dts: rockchip: add clocks in iommu nodes Jeffy Chen
2018-04-09 14:41 ` Tomeu Vizoso
2018-04-09 15:44 ` Heiko Stübner
2018-04-09 15:53 ` Robin Murphy
2018-04-09 15:55 ` Heiko Stübner
2018-04-09 21:49 ` Heiko Stübner
2018-04-10 10:54 ` Heiko Stuebner
2018-04-10 11:46 ` Heiko Stuebner
2018-03-23 7:38 ` [PATCH v8 08/14] iommu/rockchip: Control clocks needed to access the IOMMU Jeffy Chen
2018-03-23 7:38 ` [PATCH v8 09/14] dt-bindings: iommu/rockchip: Add clock property Jeffy Chen
2018-03-25 23:52 ` Rob Herring
2018-03-23 7:38 ` [PATCH v8 10/14] iommu/rockchip: Use IOMMU device for dma mapping operations Jeffy Chen
2018-03-23 7:38 ` [PATCH v8 11/14] iommu/rockchip: Use OF_IOMMU to attach devices automatically Jeffy Chen
2018-03-26 6:31 ` Daniel Kurtz
[not found] ` <5AB8A7F0.1090305@rock-chips.com>
2018-04-03 16:11 ` Daniel Kurtz
2018-04-04 11:10 ` JeffyChen
2018-03-23 7:38 ` [PATCH v8 12/14] iommu/rockchip: Fix error handling in init Jeffy Chen
2018-03-23 7:38 ` [PATCH v8 13/14] iommu/rockchip: Add runtime PM support Jeffy Chen
2018-03-23 7:38 ` [PATCH v8 14/14] iommu/rockchip: Support sharing IOMMU between masters Jeffy Chen
2018-03-29 10:24 ` [PATCH v8 00/14] iommu/rockchip: Use OF_IOMMU Joerg Roedel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180323073814.5802-6-jeffy.chen@rock-chips.com \
--to=jeffy.chen@rock-chips.com \
--cc=heiko@sntech.de \
--cc=iommu@lists.linux-foundation.org \
--cc=jcliang@chromium.org \
--cc=joro@8bytes.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robin.murphy@arm.com \
--cc=tfiga@chromium.org \
--cc=xxm@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).