linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org,
	Michael Turquette <mturquette@baylibre.com>,
	Shawn Guo <shawnguo@kernel.org>,
	Dong Aisheng <aisheng.dong@nxp.com>,
	Stephen Boyd <sboyd@codeaurora.org>,
	Sasha Levin <alexander.levin@microsoft.com>
Subject: [PATCH 4.15 71/84] clk: Dont touch hardware when reparenting during registration
Date: Fri, 23 Mar 2018 10:54:25 +0100	[thread overview]
Message-ID: <20180323095422.703323355@linuxfoundation.org> (raw)
In-Reply-To: <20180323095411.913234798@linuxfoundation.org>

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephen Boyd <sboyd@codeaurora.org>


[ Upstream commit f8f8f1d04494d3a6546bee3f0618c4dba31d7b72 ]

The orphan clocks reparent operation shouldn't touch the hardware
if clocks are enabled, otherwise it may get a chance to disable a
newly registered critical clock which triggers the warning below.

Assuming we have two clocks: A and B, B is the parent of A.
Clock A has flag: CLK_OPS_PARENT_ENABLE
Clock B has flag: CLK_IS_CRITICAL

Step 1:
Clock A is registered, then it becomes orphan.

Step 2:
Clock B is registered. Before clock B reach the critical clock enable
operation, orphan A will find the newly registered parent B and do
reparent operation, then parent B will be finally disabled in
__clk_set_parent_after() due to CLK_OPS_PARENT_ENABLE flag as there's
still no users of B which will then trigger the following warning.

WARNING: CPU: 0 PID: 0 at drivers/clk/clk.c:597 clk_core_disable+0xb4/0xe0
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0-rc1-00056-gdff1f66-dirty #1373
Hardware name: Generic DT based system
Backtrace:
[<c010c4bc>] (dump_backtrace) from [<c010c764>] (show_stack+0x18/0x1c)
 r6:600000d3 r5:00000000 r4:c0e26358 r3:00000000
[<c010c74c>] (show_stack) from [<c040599c>] (dump_stack+0xb4/0xe8)
[<c04058e8>] (dump_stack) from [<c0125c94>] (__warn+0xd8/0x104)
 r10:c0c21cd0 r9:c048aa78 r8:00000255 r7:00000009 r6:c0c1cd90 r5:00000000
 r4:00000000 r3:c0e01d34
[<c0125bbc>] (__warn) from [<c0125d74>] (warn_slowpath_null+0x28/0x30)
 r9:00000000 r8:ef00bf80 r7:c165ac4c r6:ef00bf80 r5:ef00bf80 r4:ef00bf80
[<c0125d4c>] (warn_slowpath_null) from [<c048aa78>] (clk_core_disable+0xb4/0xe0)
[<c048a9c4>] (clk_core_disable) from [<c048be88>] (clk_core_disable_lock+0x20/0x2c)
 r4:000000d3 r3:c0e0af00
[<c048be68>] (clk_core_disable_lock) from [<c048c224>] (clk_core_disable_unprepare+0x14/0x28)
 r5:00000000 r4:ef00bf80
[<c048c210>] (clk_core_disable_unprepare) from [<c048c270>] (__clk_set_parent_after+0x38/0x54)
 r4:ef00bd80 r3:000010a0
[<c048c238>] (__clk_set_parent_after) from [<c048daa8>] (clk_register+0x4d0/0x648)
 r6:ef00d500 r5:ef00bf80 r4:ef00bd80 r3:ef00bfd4
[<c048d5d8>] (clk_register) from [<c048dc30>] (clk_hw_register+0x10/0x1c)
 r9:00000000 r8:00000003 r7:00000000 r6:00000824 r5:00000001 r4:ef00d500
[<c048dc20>] (clk_hw_register) from [<c048e698>] (_register_divider+0xcc/0x120)
[<c048e5cc>] (_register_divider) from [<c048e730>] (clk_register_divider+0x44/0x54)
 r10:00000004 r9:00000003 r8:00000001 r7:00000000 r6:00000003 r5:00000001
 r4:f0810030
[<c048e6ec>] (clk_register_divider) from [<c0d3ff58>] (imx7ulp_clocks_init+0x558/0xe98)
 r7:c0e296f8 r6:c165c808 r5:00000000 r4:c165c808
[<c0d3fa00>] (imx7ulp_clocks_init) from [<c0d24db0>] (of_clk_init+0x118/0x1e0)
 r10:00000001 r9:c0e01f68 r8:00000000 r7:c0e01f60 r6:ef7f8974 r5:ef0035c0
 r4:00000006
[<c0d24c98>] (of_clk_init) from [<c0d04a50>] (time_init+0x2c/0x38)
 r10:efffed40 r9:c0d61a48 r8:c0e78000 r7:c0e07900 r6:ffffffff r5:c0e78000
 r4:00000000
[<c0d04a24>] (time_init) from [<c0d00b8c>] (start_kernel+0x218/0x394)
[<c0d00974>] (start_kernel) from [<6000807c>] (0x6000807c)
 r10:00000000 r9:410fc075 r8:6000406a r7:c0e0c930 r6:c0d61a44 r5:c0e07918
 r4:c0e78294

We know that the clk isn't enabled with any sort of prepare_count
here so we don't need to enable anything to prevent a race. And
we're holding the prepare mutex so set_rate/set_parent can't race
here either. Based on an earlier patch by Dong Aisheng.

Fixes: fc8726a2c021 ("clk: core: support clocks which requires parents enable (part 2)")
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Reported-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/clk/clk.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -2597,14 +2597,17 @@ static int __clk_core_init(struct clk_co
 	 */
 	hlist_for_each_entry_safe(orphan, tmp2, &clk_orphan_list, child_node) {
 		struct clk_core *parent = __clk_init_parent(orphan);
+		unsigned long flags;
 
 		/*
 		 * we could call __clk_set_parent, but that would result in a
 		 * redundant call to the .set_rate op, if it exists
 		 */
 		if (parent) {
-			__clk_set_parent_before(orphan, parent);
-			__clk_set_parent_after(orphan, parent, NULL);
+			/* update the clk tree topology */
+			flags = clk_enable_lock();
+			clk_reparent(orphan, parent);
+			clk_enable_unlock(flags);
 			__clk_recalc_accuracies(orphan);
 			__clk_recalc_rates(orphan, 0);
 		}

  parent reply	other threads:[~2018-03-23  9:59 UTC|newest]

Thread overview: 94+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-23  9:53 [PATCH 4.15 00/84] 4.15.13-stable review Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 01/84] scsi: megaraid_sas: Do not use 32-bit atomic request descriptor for Ventura controllers Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 02/84] staging: android: ashmem: Fix possible deadlock in ashmem_ioctl Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 03/84] drm/amdgpu: use polling mem to set SDMA3 wptr for VF Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 04/84] Bluetooth: hci_qca: Avoid setup failure on missing rampatch Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 05/84] Bluetooth: btqcomsmd: Fix skb double free corruption Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 06/84] cpufreq: longhaul: Revert transition_delay_us to 200 ms Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 07/84] media: c8sectpfe: fix potential NULL pointer dereference in c8sectpfe_timer_interrupt Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 08/84] drm/msm: fix leak in failed get_pages Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 09/84] net: fec: add phy_reset_after_clk_enable() support Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 10/84] IB/ipoib: Warn when one port fails to initialize Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 11/84] RDMA/iwpm: Fix uninitialized error code in iwpm_send_mapinfo() Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 12/84] hv_netvsc: Fix the receive buffer size limit Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 13/84] hv_netvsc: Fix the TX/RX buffer default sizes Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 14/84] tcp: allow TLP in ECN CWR Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 15/84] spi: sh-msiof: Avoid writing to registers from spi_master.setup() Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 16/84] libbpf: prefer global symbols as bpf program name source Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 17/84] rtlwifi: rtl_pci: Fix the bug when inactiveps is enabled Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 18/84] rtlwifi: always initialize variables given to RT_TRACE() Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 19/84] media: bt8xx: Fix err bt878_probe() Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 20/84] ath10k: handling qos at STA side based on AP WMM enable/disable Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 21/84] media: [RESEND] media: dvb-frontends: Add delay to Si2168 restart Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 22/84] qmi_wwan: set FLAG_SEND_ZLP to avoid network initiated disconnect Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 23/84] tty: goldfish: Enable earlycon only if built-in Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 24/84] serial: 8250_dw: Disable clock on error Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 25/84] cros_ec: fix nul-termination for firmware build info Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 26/84] watchdog: Fix potential kref imbalance when opening watchdog Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 27/84] watchdog: Fix kref imbalance seen if handle_boot_enabled=0 Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 28/84] platform/chrome: Use proper protocol transfer function Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 29/84] dmaengine: zynqmp_dma: Fix race condition in the probe Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 30/84] drm/tilcdc: ensure nonatomic iowrite64 is not used Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 31/84] mmc: avoid removing non-removable hosts during suspend Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 32/84] mmc: block: fix logical error to avoid memory leak Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 33/84] /dev/mem: Add bounce buffer for copy-out Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 34/84] net: phy: meson-gxl: check phy_write return value Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 35/84] sfp: fix EEPROM reading in the case of non-SFF8472 SFPs Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 36/84] sfp: fix non-detection of PHY Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 37/84] media: s5p-mfc: Fix lock contention - request_firmware() once Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 38/84] rtc: ac100: Fix multiple race conditions Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 39/84] IB/ipoib: Avoid memory leak if the SA returns a different DGID Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 40/84] RDMA/cma: Use correct size when writing netlink stats Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 41/84] IB/umem: Fix use of npages/nmap fields Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 42/84] iser-target: avoid reinitializing rdma contexts for isert commands Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 43/84] bpf/cgroup: fix a verification error for a CGROUP_DEVICE type prog Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 44/84] PCI/ASPM: Calculate LTR_L1.2_THRESHOLD from device characteristics Greg Kroah-Hartman
2018-03-23  9:53 ` [PATCH 4.15 45/84] vgacon: Set VGA struct resource types Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 46/84] omapdrm: panel: fix compatible vendor string for td028ttec1 Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 47/84] mmc: sdhci-xenon: wait 5ms after set 1.8V signal enable Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 48/84] drm/omap: DMM: Check for DMM readiness after successful transaction commit Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 49/84] pty: cancel pty slave port bufs work in tty_release Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 50/84] coresight: Fix disabling of CoreSight TPIU Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 51/84] PCI: designware-ep: Fix ->get_msi() to check MSI_EN bit Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 52/84] PCI: endpoint: Fix find_first_zero_bit() usage Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 53/84] PCI: rcar: Handle rcar_pcie_parse_request_of_pci_ranges() failures Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 54/84] media: davinci: fix a debug printk Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 55/84] clk: check ops pointer on clock register Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 56/84] dt-bindings: display: panel: Fix compatible string for Toshiba LT089AC29000 Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 57/84] clk: use round rate to bail out early in set_rate Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 58/84] pinctrl: Really force states during suspend/resume Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 59/84] pinctrl: rockchip: enable clock when reading pin direction register Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 60/84] iommu/vt-d: clean up pr_irq if request_threaded_irq fails Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 61/84] ip6_vti: adjust vti mtu according to mtu of lower device Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 62/84] ip_gre: fix error path when erspan_rcv failed Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 63/84] ip_gre: fix potential memory leak in erspan_rcv Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 64/84] soc: qcom: smsm: fix child-node lookup Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 65/84] scsi: lpfc: Fix SCSI LUN discovery when SCSI and NVME enabled Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 66/84] scsi: lpfc: Fix issues connecting with nvme initiator Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 67/84] RDMA/ocrdma: Fix permissions for OCRDMA_RESET_STATS Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 68/84] ARM: dts: aspeed-evb: Add unit name to memory node Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 69/84] nfsd4: permit layoutget of executable-only files Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 70/84] clk: at91: pmc: Wait for clocks when resuming Greg Kroah-Hartman
2018-03-23  9:54 ` Greg Kroah-Hartman [this message]
2018-03-23  9:54 ` [PATCH 4.15 72/84] clk: axi-clkgen: Correctly handle nocount bit in recalc_rate() Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 73/84] clk: si5351: Rename internal plls to avoid name collisions Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 74/84] crypto: artpec6 - set correct iv size for gcm(aes) Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 75/84] hwrng: core - Clean up RNG list when last hwrng is unregistered Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 76/84] dmaengine: ti-dma-crossbar: Fix event mapping for TPCC_EVT_MUX_60_63 Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 77/84] IB/mlx5: Fix integer overflows in mlx5_ib_create_srq Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 78/84] IB/mlx5: Fix out-of-bounds read in create_raw_packet_qp_rq Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 79/84] RDMA/vmw_pvrdma: Fix usage of user response structures in ABI file Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 80/84] serial: 8250_pci: Dont fail on multiport card class Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 81/84] RDMA/core: Do not use invalid destination in determining port reuse Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 82/84] clk: migrate the count of orphaned clocks at init Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 83/84] RDMA/ucma: Fix access to non-initialized CM_ID object Greg Kroah-Hartman
2018-03-23  9:54 ` [PATCH 4.15 84/84] RDMA/ucma: Dont allow join attempts for unsupported AF family Greg Kroah-Hartman
2018-03-23 13:40 ` [PATCH 4.15 00/84] 4.15.13-stable review kernelci.org bot
2018-03-23 14:22 ` Naresh Kamboju
2018-03-23 15:08   ` Greg Kroah-Hartman
2018-03-23 16:40   ` Greg Kroah-Hartman
2018-03-24  7:52     ` Naresh Kamboju
2018-03-24  9:05       ` Greg Kroah-Hartman
2018-03-23 20:46 ` Shuah Khan
2018-03-24  0:12 ` Guenter Roeck
2018-03-24  7:47   ` Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180323095422.703323355@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=aisheng.dong@nxp.com \
    --cc=alexander.levin@microsoft.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=sboyd@codeaurora.org \
    --cc=shawnguo@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).