* Re: [v9,04/15] clk: qcom: Add HFPLL driver
[not found] <520347148-27852-5-git-send-email-sricharan@codeaurora.org>
@ 2018-03-25 19:33 ` Craig Tatlor
2018-03-26 9:47 ` sricharan
0 siblings, 1 reply; 2+ messages in thread
From: Craig Tatlor @ 2018-03-25 19:33 UTC (permalink / raw)
To: robh, viresh.kumar, mark.rutland, mturquette, sboyd, linux,
andy.gross, david.brown, rjw, linux-arm-kernel, devicetree,
linux-kernel, linux-clk, linux-arm-msm, linux-soc, linux-pm,
linux
This doesn't seem to work correctly with the higher clocks on 8974pro, specifically 2150400000 hz or above, maybe its something to do with being bigger than an unsigned long.
When i try to set any higher frequency it jumps down to 300mhz.
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [v9,04/15] clk: qcom: Add HFPLL driver
2018-03-25 19:33 ` [v9,04/15] clk: qcom: Add HFPLL driver Craig Tatlor
@ 2018-03-26 9:47 ` sricharan
0 siblings, 0 replies; 2+ messages in thread
From: sricharan @ 2018-03-26 9:47 UTC (permalink / raw)
To: Craig Tatlor
Cc: robh, viresh.kumar, mark.rutland, mturquette, sboyd, linux,
andy.gross, david.brown, rjw, linux-arm-kernel, devicetree,
linux-kernel, linux-clk, linux-arm-msm, linux-soc, linux-pm,
linux
On 2018-03-26 01:03, Craig Tatlor wrote:
> This doesn't seem to work correctly with the higher clocks on 8974pro,
> specifically 2150400000 hz or above, maybe its something to do with
> being bigger than an unsigned long.
>
> When i try to set any higher frequency it jumps down to 300mhz.
Thanks for testing this series. Not sure i got dropped from the list.
So i will check on this and come back.
Regards,
Sricharan
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2018-03-26 9:47 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <520347148-27852-5-git-send-email-sricharan@codeaurora.org>
2018-03-25 19:33 ` [v9,04/15] clk: qcom: Add HFPLL driver Craig Tatlor
2018-03-26 9:47 ` sricharan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).