From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752780AbeC1Jwg (ORCPT ); Wed, 28 Mar 2018 05:52:36 -0400 Received: from mail-wr0-f196.google.com ([209.85.128.196]:45468 "EHLO mail-wr0-f196.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752676AbeC1Jv7 (ORCPT ); Wed, 28 Mar 2018 05:51:59 -0400 X-Google-Smtp-Source: AIpwx497h7Vcb/3A2ra0s+Du0RHBegfXA2dXDOOs5hbaL3CZFh5Z4OGC2T8BmyjJ888WcWXrPriTiQ== From: Thierry Escande To: Rob Herring , Andy Gross , Marcel Holtmann , Johan Hedberg , David Brown , Mark Rutland Cc: Andy Shevchenko , Loic Poulain , Bjorn Andersson , Srinivas Kandagatla , linux-bluetooth@vger.kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v6 2/3] dt-bindings: net: bluetooth: Add qualcomm-bluetooth Date: Wed, 28 Mar 2018 11:51:32 +0200 Message-Id: <20180328095133.14343-3-thierry.escande@linaro.org> X-Mailer: git-send-email 2.14.1 In-Reply-To: <20180328095133.14343-1-thierry.escande@linaro.org> References: <20180328095133.14343-1-thierry.escande@linaro.org> MIME-Version: 1.0 Content-Type: text/plain; charset = "utf-8" Content-Transfert-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add binding document for serial bluetooth chips using Qualcomm protocol. Signed-off-by: Thierry Escande Reviewed-by: Rob Herring --- v6: - Remove chip specific pinctrl conf - Move gpio and clocks into optional props section v5: - Rename 'bt-disable-n' gpio as 'enable' v4: - Move bt-disable-n-gpios to required properties section - Add clocks and pinctrl-0 as required properties v3: no change v2: no change .../devicetree/bindings/net/qualcomm-bluetooth.txt | 30 ++++++++++++++++++++++ 1 file changed, 30 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt new file mode 100644 index 000000000000..f1ca8f667a5e --- /dev/null +++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt @@ -0,0 +1,30 @@ +Qualcomm Bluetooth Chips +--------------------- + +This documents the binding structure and common properties for serial +attached Qualcomm devices. + +Serial attached Qualcomm devices shall be a child node of the host UART +device the slave device is attached to. + +Required properties: + - compatible: should contain one of the following: + * "qcom,qca6174-bt" + +Optional properties: + - enable-gpios: gpio specifier used to enable chip + - clocks: clock provided to the controler (SUSCLK_32KHZ) + +Example: + +serial@7570000 { + label = "BT-UART"; + status = "okay"; + + bluetooth { + compatible = "qcom,qca6174-bt"; + + enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; + clocks = <&divclk4>; + }; +}; -- 2.14.1