linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Long Li <longli@linuxonhyperv.com>
To: Steve French <sfrench@samba.org>,
	linux-cifs@vger.kernel.org, samba-technical@lists.samba.org,
	linux-kernel@vger.kernel.org, linux-rdma@vger.kernel.org
Cc: Long Li <longli@microsoft.com>, stable@vger.kernel.org
Subject: [Patch v2 3/6] cifs: smbd: Avoid allocating iov on the stack
Date: Tue, 17 Apr 2018 12:17:07 -0700	[thread overview]
Message-ID: <20180417191710.14855-3-longli@linuxonhyperv.com> (raw)
In-Reply-To: <20180417191710.14855-1-longli@linuxonhyperv.com>

From: Long Li <longli@microsoft.com>

It's not necessary to allocate another iov when going through the buffers
in smbd_send() through RDMA send.

Remove it to reduce stack size.

Signed-off-by: Long Li <longli@microsoft.com>
Cc: stable@vger.kernel.org
---
 fs/cifs/smbdirect.c | 36 ++++++++++++------------------------
 1 file changed, 12 insertions(+), 24 deletions(-)

diff --git a/fs/cifs/smbdirect.c b/fs/cifs/smbdirect.c
index b5c6c0d..f575e9a 100644
--- a/fs/cifs/smbdirect.c
+++ b/fs/cifs/smbdirect.c
@@ -2088,7 +2088,7 @@ int smbd_send(struct smbd_connection *info, struct smb_rqst *rqst)
 	int start, i, j;
 	int max_iov_size =
 		info->max_send_size - sizeof(struct smbd_data_transfer);
-	struct kvec iov[SMBDIRECT_MAX_SGE];
+	struct kvec *iov;
 	int rc;
 
 	info->smbd_send_pending++;
@@ -2099,32 +2099,20 @@ int smbd_send(struct smbd_connection *info, struct smb_rqst *rqst)
 	}
 
 	/*
-	 * This usually means a configuration error
-	 * We use RDMA read/write for packet size > rdma_readwrite_threshold
-	 * as long as it's properly configured we should never get into this
-	 * situation
-	 */
-	if (rqst->rq_nvec + rqst->rq_npages > SMBDIRECT_MAX_SGE) {
-		log_write(ERR, "maximum send segment %x exceeding %x\n",
-			 rqst->rq_nvec + rqst->rq_npages, SMBDIRECT_MAX_SGE);
-		rc = -EINVAL;
-		goto done;
-	}
-
-	/*
-	 * Remove the RFC1002 length defined in MS-SMB2 section 2.1
-	 * It is used only for TCP transport
+	 * Skip the RFC1002 length defined in MS-SMB2 section 2.1
+	 * It is used only for TCP transport in the iov[0]
 	 * In future we may want to add a transport layer under protocol
 	 * layer so this will only be issued to TCP transport
 	 */
-	iov[0].iov_base = (char *)rqst->rq_iov[0].iov_base + 4;
-	iov[0].iov_len = rqst->rq_iov[0].iov_len - 4;
-	buflen += iov[0].iov_len;
+
+	if (rqst->rq_iov[0].iov_len != 4) {
+		log_write(ERR, "expected the pdu length in 1st iov, but got 0x%lu\n", rqst->rq_iov[0].iov_len);
+		return -EINVAL;
+	}
+	iov = &rqst->rq_iov[1];
 
 	/* total up iov array first */
-	for (i = 1; i < rqst->rq_nvec; i++) {
-		iov[i].iov_base = rqst->rq_iov[i].iov_base;
-		iov[i].iov_len = rqst->rq_iov[i].iov_len;
+	for (i = 0; i < rqst->rq_nvec-1; i++) {
 		buflen += iov[i].iov_len;
 	}
 
@@ -2197,14 +2185,14 @@ int smbd_send(struct smbd_connection *info, struct smb_rqst *rqst)
 						goto done;
 				}
 				i++;
-				if (i == rqst->rq_nvec)
+				if (i == rqst->rq_nvec-1)
 					break;
 			}
 			start = i;
 			buflen = 0;
 		} else {
 			i++;
-			if (i == rqst->rq_nvec) {
+			if (i == rqst->rq_nvec-1) {
 				/* send out all remaining vecs */
 				remaining_data_length -= buflen;
 				log_write(INFO,
-- 
2.7.4

  parent reply	other threads:[~2018-04-17 19:18 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-17 19:17 [Patch v2 1/6] cifs: smbd: Check for iov length on sending the last iov Long Li
2018-04-17 19:17 ` [Patch v2 2/6] cifs: Allocate validate negotiation request through kmalloc Long Li
2018-04-17 19:59   ` Parav Pandit
2018-04-17 20:11     ` Long Li
2018-04-17 20:37       ` Steve French
2018-04-19  0:45   ` Michael Kelley (EOSG)
2018-04-19  0:48     ` Long Li
2018-04-17 19:17 ` Long Li [this message]
2018-04-23 15:31   ` [Patch v2 3/6] cifs: smbd: Avoid allocating iov on the stack Steve French
2018-04-23 17:33     ` Long Li
2018-04-23 17:50       ` Steve French
2018-04-17 19:17 ` [Patch v2 4/6] cifs: smbd: Don't use RDMA read/write when signing is used Long Li
2018-04-23 15:34   ` Steve French
2018-04-17 19:17 ` [Patch v2 5/6] cifs: smbd: Enable signing with smbdirect Long Li
2018-04-17 19:17 ` [Patch v2 6/6] cifs: smbd: Dump SMB packet when configured Long Li
2018-04-22 23:27 ` [Patch v2 1/6] cifs: smbd: Check for iov length on sending the last iov Michael Kelley (EOSG)
2018-04-23 19:34   ` Long Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180417191710.14855-3-longli@linuxonhyperv.com \
    --to=longli@linuxonhyperv.com \
    --cc=linux-cifs@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rdma@vger.kernel.org \
    --cc=longli@microsoft.com \
    --cc=samba-technical@lists.samba.org \
    --cc=sfrench@samba.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).