linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
To: Balbir Singh <bsingharora@gmail.com>
Cc: linux-kernel@vger.kernel.org, tglx@linutronix.de,
	Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Subject: [PATCH] delayacct: use raw_spinlocks
Date: Mon, 23 Apr 2018 18:10:23 +0200	[thread overview]
Message-ID: <20180423161024.6710-1-bigeasy@linutronix.de> (raw)

try_to_wake_up() might invoke delayacct_blkio_end() while holding the
pi_lock (which is a raw_spinlock_t). The lock is only held for a short
amount of time so it should be safe to make it raw.
Make struct task_delay_info.lock a raw_spinlock_t.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
 include/linux/delayacct.h |  2 +-
 kernel/delayacct.c        | 17 +++++++++--------
 2 files changed, 10 insertions(+), 9 deletions(-)

diff --git a/include/linux/delayacct.h b/include/linux/delayacct.h
index 5e335b6203f4..e6c0448ebcc7 100644
--- a/include/linux/delayacct.h
+++ b/include/linux/delayacct.h
@@ -29,7 +29,7 @@
 
 #ifdef CONFIG_TASK_DELAY_ACCT
 struct task_delay_info {
-	spinlock_t	lock;
+	raw_spinlock_t	lock;
 	unsigned int	flags;	/* Private per-task flags */
 
 	/* For each stat XXX, add following, aligned appropriately
diff --git a/kernel/delayacct.c b/kernel/delayacct.c
index e2764d767f18..ca8ac2824f0b 100644
--- a/kernel/delayacct.c
+++ b/kernel/delayacct.c
@@ -44,23 +44,24 @@ void __delayacct_tsk_init(struct task_struct *tsk)
 {
 	tsk->delays = kmem_cache_zalloc(delayacct_cache, GFP_KERNEL);
 	if (tsk->delays)
-		spin_lock_init(&tsk->delays->lock);
+		raw_spin_lock_init(&tsk->delays->lock);
 }
 
 /*
  * Finish delay accounting for a statistic using its timestamps (@start),
  * accumalator (@total) and @count
  */
-static void delayacct_end(spinlock_t *lock, u64 *start, u64 *total, u32 *count)
+static void delayacct_end(raw_spinlock_t *lock, u64 *start, u64 *total,
+			  u32 *count)
 {
 	s64 ns = ktime_get_ns() - *start;
 	unsigned long flags;
 
 	if (ns > 0) {
-		spin_lock_irqsave(lock, flags);
+		raw_spin_lock_irqsave(lock, flags);
 		*total += ns;
 		(*count)++;
-		spin_unlock_irqrestore(lock, flags);
+		raw_spin_unlock_irqrestore(lock, flags);
 	}
 }
 
@@ -127,7 +128,7 @@ int __delayacct_add_tsk(struct taskstats *d, struct task_struct *tsk)
 
 	/* zero XXX_total, non-zero XXX_count implies XXX stat overflowed */
 
-	spin_lock_irqsave(&tsk->delays->lock, flags);
+	raw_spin_lock_irqsave(&tsk->delays->lock, flags);
 	tmp = d->blkio_delay_total + tsk->delays->blkio_delay;
 	d->blkio_delay_total = (tmp < d->blkio_delay_total) ? 0 : tmp;
 	tmp = d->swapin_delay_total + tsk->delays->swapin_delay;
@@ -137,7 +138,7 @@ int __delayacct_add_tsk(struct taskstats *d, struct task_struct *tsk)
 	d->blkio_count += tsk->delays->blkio_count;
 	d->swapin_count += tsk->delays->swapin_count;
 	d->freepages_count += tsk->delays->freepages_count;
-	spin_unlock_irqrestore(&tsk->delays->lock, flags);
+	raw_spin_unlock_irqrestore(&tsk->delays->lock, flags);
 
 	return 0;
 }
@@ -147,10 +148,10 @@ __u64 __delayacct_blkio_ticks(struct task_struct *tsk)
 	__u64 ret;
 	unsigned long flags;
 
-	spin_lock_irqsave(&tsk->delays->lock, flags);
+	raw_spin_lock_irqsave(&tsk->delays->lock, flags);
 	ret = nsec_to_clock_t(tsk->delays->blkio_delay +
 				tsk->delays->swapin_delay);
-	spin_unlock_irqrestore(&tsk->delays->lock, flags);
+	raw_spin_unlock_irqrestore(&tsk->delays->lock, flags);
 	return ret;
 }
 
-- 
2.17.0

             reply	other threads:[~2018-04-23 16:10 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-23 16:10 Sebastian Andrzej Siewior [this message]
2018-04-27 12:39 ` [tip:locking/core] delayacct: Use raw_spinlocks tip-bot for Sebastian Andrzej Siewior

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180423161024.6710-1-bigeasy@linutronix.de \
    --to=bigeasy@linutronix.de \
    --cc=bsingharora@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).