From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751934AbeDYMzZ (ORCPT ); Wed, 25 Apr 2018 08:55:25 -0400 Received: from fllnx209.ext.ti.com ([198.47.19.16]:15250 "EHLO fllnx209.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751525AbeDYMzO (ORCPT ); Wed, 25 Apr 2018 08:55:14 -0400 From: Kishon Vijay Abraham I To: =?UTF-8?q?Beno=C3=AEt=20Cousson=20?= , Tony Lindgren CC: Jonathan Corbet , Rob Herring , Mark Rutland , , , , , , Subject: [PATCH v3 00/15] dra7: mmc: Update mmc dt node to use sdhci-omap Date: Wed, 25 Apr 2018 18:24:34 +0530 Message-ID: <20180425125449.19755-1-kishon@ti.com> X-Mailer: git-send-email 2.17.0 MIME-Version: 1.0 Content-Type: text/plain X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Previous version of the patch series was sent here https://lkml.org/lkml/2018/2/6/250 Most of the patches sent for v2 was merged. Remaining unmerged patches from v2 and a few additional patches are sent here. This series should be merged only after [1]. [1] -> https://marc.info/?l=linux-kernel&m=152465820531802&w=2 This series: *) Adds wilink wlan support (Now all MMC instances in DRA7 will use sdhci-omap) *) Add a new pinctrl group for clk line without pullup required for UHS cards to work reliably. *) Update README to make sure users update .config file from 4.18 kernel. *) Use sdhci-omap programming model. In the "Use sdhci-omap programming model" patch, "ti,omap4-hsmmc" compatible is removed. This is because if both "ti,dra7-sdhci" and "ti,omap4-hsmmc" is added and if there is probe deferral in sdhci_omap driver, the device is binding to omap_hsmmc driver. Once omap_hsmmc and sdhci_omap driver are feature identical, sdhci_omap driver will be made to support omap_hsmmc binding (including "ti,omap4-hsmmc" compatible) and omap_hsmmc driver will be removed. Till then dt nodes with "ti,omap4-hsmmc" compatible will use omap_hsmmc driver and "ti,dra7-sdhci" compatible will use sdhci_omap driver. Hari Nagalla (2): ARM: dts: dra72-evm-common: Add wilink8 wlan support ARM: dts: dra7-evm: Add wilink8 wlan support Kishon Vijay Abraham I (11): ARM: dts: dra72-evm-common: Remove mmc specific pinmux ARM: dts: dra71-evm: Add "vqmmc-supply" property for mmc2 ARM: dts: dra72x-mmc-iodelay: Add a new pinctrl group for clk line without pullup ARM: dts: dra74x-mmc-iodelay: Add a new pinctrl group for clk line without pullup ARM: dts: dra76x-mmc-iodelay: Add a new pinctrl group for clk line without pullup ARM: dts: am57xx-idk: Use pinctrl group from dra7xx-mmc-iodelay.dtsi to select pulldown ARM: dts: dra71-evm: Use pinctrl group from dra72x-mmc-iodelay.dtsi to select pulldown ARM: dts: dra7-evm: Model EVM_3V6 regulator ARM: dts: dra7: Use sdhci-omap programming model ARM: dts: dra7: Add high speed modes capability to MMC1/MMC2 dt node Documentation: ARM: Add new MMC requirements for DRA7/K2G Sekhar Nori (1): ARM: dts: am574x-idk: Add pinmux configuration for MMC Vishal Mahaveer (1): ARM: dts: dra76-evm: Add wilink8 wlan support Documentation/arm/OMAP/README | 4 ++ arch/arm/boot/dts/am571x-idk.dts | 2 +- arch/arm/boot/dts/am572x-idk.dts | 2 +- arch/arm/boot/dts/am574x-idk.dts | 19 +++++ .../boot/dts/am57xx-beagle-x15-common.dtsi | 4 +- arch/arm/boot/dts/am57xx-beagle-x15.dts | 1 + arch/arm/boot/dts/am57xx-idk-common.dtsi | 3 +- arch/arm/boot/dts/dra7-evm-common.dtsi | 15 ++++ arch/arm/boot/dts/dra7-evm.dts | 68 ++++++++++++++++++ arch/arm/boot/dts/dra7.dtsi | 30 ++++---- arch/arm/boot/dts/dra71-evm.dts | 16 +---- arch/arm/boot/dts/dra72-evm-common.dtsi | 71 +++++++++++-------- arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi | 22 ++++++ arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi | 11 +++ arch/arm/boot/dts/dra76-evm.dts | 34 ++++++++- arch/arm/boot/dts/dra76x-mmc-iodelay.dtsi | 11 +++ 16 files changed, 248 insertions(+), 65 deletions(-) -- 2.17.0