linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org, Tom Lendacky <thomas.lendacky@amd.com>,
	"David S. Miller" <davem@davemloft.net>
Subject: [PATCH 4.16 36/81] amd-xgbe: Improve KR auto-negotiation and training
Date: Fri, 27 Apr 2018 15:58:38 +0200	[thread overview]
Message-ID: <20180427135745.073838548@linuxfoundation.org> (raw)
In-Reply-To: <20180427135743.216853156@linuxfoundation.org>

4.16-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tom Lendacky <thomas.lendacky@amd.com>


[ Upstream commit 96f4d430c507ed4856048c2dc9c1a2ea5b5e74e4 ]

Update xgbe-phy-v2.c to make use of the auto-negotiation (AN) phy hooks
to improve the ability to successfully complete Clause 73 AN when running
at 10gbps.  Hardware can sometimes have issues with CDR lock when the
AN DME page exchange is being performed.

The AN and KR training hooks are used as follows:
- The pre AN hook is used to disable CDR tracking in the PHY so that the
  DME page exchange can be successfully and consistently completed.
- The post KR training hook is used to re-enable the CDR tracking so that
  KR training can successfully complete.
- The post AN hook is used to check for an unsuccessful AN which will
  increase a CDR tracking enablement delay (up to a maximum value).

Add two debugfs entries to allow control over use of the CDR tracking
workaround.  The debugfs entries allow the CDR tracking workaround to
be disabled and determine whether to re-enable CDR tracking before or
after link training has been initiated.

Also, with these changes the receiver reset cycle that is performed during
the link status check can be performed less often.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/amd/xgbe/xgbe-common.h  |    8 +
 drivers/net/ethernet/amd/xgbe/xgbe-debugfs.c |   16 +++
 drivers/net/ethernet/amd/xgbe/xgbe-main.c    |    1 
 drivers/net/ethernet/amd/xgbe/xgbe-mdio.c    |    8 +
 drivers/net/ethernet/amd/xgbe/xgbe-pci.c     |    2 
 drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c  |  125 ++++++++++++++++++++++++++-
 drivers/net/ethernet/amd/xgbe/xgbe.h         |    4 
 7 files changed, 160 insertions(+), 4 deletions(-)

--- a/drivers/net/ethernet/amd/xgbe/xgbe-common.h
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-common.h
@@ -1321,6 +1321,10 @@
 #define MDIO_VEND2_AN_STAT		0x8002
 #endif
 
+#ifndef MDIO_VEND2_PMA_CDR_CONTROL
+#define MDIO_VEND2_PMA_CDR_CONTROL	0x8056
+#endif
+
 #ifndef MDIO_CTRL1_SPEED1G
 #define MDIO_CTRL1_SPEED1G		(MDIO_CTRL1_SPEED10G & ~BMCR_SPEED100)
 #endif
@@ -1369,6 +1373,10 @@
 #define XGBE_AN_CL37_TX_CONFIG_MASK	0x08
 #define XGBE_AN_CL37_MII_CTRL_8BIT	0x0100
 
+#define XGBE_PMA_CDR_TRACK_EN_MASK	0x01
+#define XGBE_PMA_CDR_TRACK_EN_OFF	0x00
+#define XGBE_PMA_CDR_TRACK_EN_ON	0x01
+
 /* Bit setting and getting macros
  *  The get macro will extract the current bit field value from within
  *  the variable
--- a/drivers/net/ethernet/amd/xgbe/xgbe-debugfs.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-debugfs.c
@@ -519,6 +519,22 @@ void xgbe_debugfs_init(struct xgbe_prv_d
 				   "debugfs_create_file failed\n");
 	}
 
+	if (pdata->vdata->an_cdr_workaround) {
+		pfile = debugfs_create_bool("an_cdr_workaround", 0600,
+					    pdata->xgbe_debugfs,
+					    &pdata->debugfs_an_cdr_workaround);
+		if (!pfile)
+			netdev_err(pdata->netdev,
+				   "debugfs_create_bool failed\n");
+
+		pfile = debugfs_create_bool("an_cdr_track_early", 0600,
+					    pdata->xgbe_debugfs,
+					    &pdata->debugfs_an_cdr_track_early);
+		if (!pfile)
+			netdev_err(pdata->netdev,
+				   "debugfs_create_bool failed\n");
+	}
+
 	kfree(buf);
 }
 
--- a/drivers/net/ethernet/amd/xgbe/xgbe-main.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-main.c
@@ -349,6 +349,7 @@ int xgbe_config_netdev(struct xgbe_prv_d
 	XGMAC_SET_BITS(pdata->rss_options, MAC_RSSCR, UDP4TE, 1);
 
 	/* Call MDIO/PHY initialization routine */
+	pdata->debugfs_an_cdr_workaround = pdata->vdata->an_cdr_workaround;
 	ret = pdata->phy_if.phy_init(pdata);
 	if (ret)
 		return ret;
--- a/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c
@@ -432,6 +432,8 @@ static void xgbe_an73_disable(struct xgb
 	xgbe_an73_set(pdata, false, false);
 	xgbe_an73_disable_interrupts(pdata);
 
+	pdata->an_start = 0;
+
 	netif_dbg(pdata, link, pdata->netdev, "CL73 AN disabled\n");
 }
 
@@ -511,11 +513,11 @@ static enum xgbe_an xgbe_an73_tx_trainin
 		XMDIO_WRITE(pdata, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL,
 			    reg);
 
-		if (pdata->phy_if.phy_impl.kr_training_post)
-			pdata->phy_if.phy_impl.kr_training_post(pdata);
-
 		netif_dbg(pdata, link, pdata->netdev,
 			  "KR training initiated\n");
+
+		if (pdata->phy_if.phy_impl.kr_training_post)
+			pdata->phy_if.phy_impl.kr_training_post(pdata);
 	}
 
 	return XGBE_AN_PAGE_RECEIVED;
--- a/drivers/net/ethernet/amd/xgbe/xgbe-pci.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-pci.c
@@ -456,6 +456,7 @@ static const struct xgbe_version_data xg
 	.irq_reissue_support		= 1,
 	.tx_desc_prefetch		= 5,
 	.rx_desc_prefetch		= 5,
+	.an_cdr_workaround		= 1,
 };
 
 static const struct xgbe_version_data xgbe_v2b = {
@@ -470,6 +471,7 @@ static const struct xgbe_version_data xg
 	.irq_reissue_support		= 1,
 	.tx_desc_prefetch		= 5,
 	.rx_desc_prefetch		= 5,
+	.an_cdr_workaround		= 1,
 };
 
 static const struct pci_device_id xgbe_pci_table[] = {
--- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
@@ -147,6 +147,14 @@
 /* Rate-change complete wait/retry count */
 #define XGBE_RATECHANGE_COUNT		500
 
+/* CDR delay values for KR support (in usec) */
+#define XGBE_CDR_DELAY_INIT		10000
+#define XGBE_CDR_DELAY_INC		10000
+#define XGBE_CDR_DELAY_MAX		100000
+
+/* RRC frequency during link status check */
+#define XGBE_RRC_FREQUENCY		10
+
 enum xgbe_port_mode {
 	XGBE_PORT_MODE_RSVD = 0,
 	XGBE_PORT_MODE_BACKPLANE,
@@ -355,6 +363,10 @@ struct xgbe_phy_data {
 	unsigned int redrv_addr;
 	unsigned int redrv_lane;
 	unsigned int redrv_model;
+
+	/* KR AN support */
+	unsigned int phy_cdr_notrack;
+	unsigned int phy_cdr_delay;
 };
 
 /* I2C, MDIO and GPIO lines are muxed, so only one device at a time */
@@ -2361,7 +2373,7 @@ static int xgbe_phy_link_status(struct x
 		return 1;
 
 	/* No link, attempt a receiver reset cycle */
-	if (phy_data->rrc_count++) {
+	if (phy_data->rrc_count++ > XGBE_RRC_FREQUENCY) {
 		phy_data->rrc_count = 0;
 		xgbe_phy_rrc(pdata);
 	}
@@ -2669,6 +2681,103 @@ static bool xgbe_phy_port_enabled(struct
 	return true;
 }
 
+static void xgbe_phy_cdr_track(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	if (!pdata->debugfs_an_cdr_workaround)
+		return;
+
+	if (!phy_data->phy_cdr_notrack)
+		return;
+
+	usleep_range(phy_data->phy_cdr_delay,
+		     phy_data->phy_cdr_delay + 500);
+
+	XMDIO_WRITE_BITS(pdata, MDIO_MMD_PMAPMD, MDIO_VEND2_PMA_CDR_CONTROL,
+			 XGBE_PMA_CDR_TRACK_EN_MASK,
+			 XGBE_PMA_CDR_TRACK_EN_ON);
+
+	phy_data->phy_cdr_notrack = 0;
+}
+
+static void xgbe_phy_cdr_notrack(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	if (!pdata->debugfs_an_cdr_workaround)
+		return;
+
+	if (phy_data->phy_cdr_notrack)
+		return;
+
+	XMDIO_WRITE_BITS(pdata, MDIO_MMD_PMAPMD, MDIO_VEND2_PMA_CDR_CONTROL,
+			 XGBE_PMA_CDR_TRACK_EN_MASK,
+			 XGBE_PMA_CDR_TRACK_EN_OFF);
+
+	xgbe_phy_rrc(pdata);
+
+	phy_data->phy_cdr_notrack = 1;
+}
+
+static void xgbe_phy_kr_training_post(struct xgbe_prv_data *pdata)
+{
+	if (!pdata->debugfs_an_cdr_track_early)
+		xgbe_phy_cdr_track(pdata);
+}
+
+static void xgbe_phy_kr_training_pre(struct xgbe_prv_data *pdata)
+{
+	if (pdata->debugfs_an_cdr_track_early)
+		xgbe_phy_cdr_track(pdata);
+}
+
+static void xgbe_phy_an_post(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	switch (pdata->an_mode) {
+	case XGBE_AN_MODE_CL73:
+	case XGBE_AN_MODE_CL73_REDRV:
+		if (phy_data->cur_mode != XGBE_MODE_KR)
+			break;
+
+		xgbe_phy_cdr_track(pdata);
+
+		switch (pdata->an_result) {
+		case XGBE_AN_READY:
+		case XGBE_AN_COMPLETE:
+			break;
+		default:
+			if (phy_data->phy_cdr_delay < XGBE_CDR_DELAY_MAX)
+				phy_data->phy_cdr_delay += XGBE_CDR_DELAY_INC;
+			else
+				phy_data->phy_cdr_delay = XGBE_CDR_DELAY_INIT;
+			break;
+		}
+		break;
+	default:
+		break;
+	}
+}
+
+static void xgbe_phy_an_pre(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	switch (pdata->an_mode) {
+	case XGBE_AN_MODE_CL73:
+	case XGBE_AN_MODE_CL73_REDRV:
+		if (phy_data->cur_mode != XGBE_MODE_KR)
+			break;
+
+		xgbe_phy_cdr_notrack(pdata);
+		break;
+	default:
+		break;
+	}
+}
+
 static void xgbe_phy_stop(struct xgbe_prv_data *pdata)
 {
 	struct xgbe_phy_data *phy_data = pdata->phy_data;
@@ -2680,6 +2789,9 @@ static void xgbe_phy_stop(struct xgbe_pr
 	xgbe_phy_sfp_reset(phy_data);
 	xgbe_phy_sfp_mod_absent(pdata);
 
+	/* Reset CDR support */
+	xgbe_phy_cdr_track(pdata);
+
 	/* Power off the PHY */
 	xgbe_phy_power_off(pdata);
 
@@ -2712,6 +2824,9 @@ static int xgbe_phy_start(struct xgbe_pr
 	/* Start in highest supported mode */
 	xgbe_phy_set_mode(pdata, phy_data->start_mode);
 
+	/* Reset CDR support */
+	xgbe_phy_cdr_track(pdata);
+
 	/* After starting the I2C controller, we can check for an SFP */
 	switch (phy_data->port_mode) {
 	case XGBE_PORT_MODE_SFP:
@@ -3019,6 +3134,8 @@ static int xgbe_phy_init(struct xgbe_prv
 		}
 	}
 
+	phy_data->phy_cdr_delay = XGBE_CDR_DELAY_INIT;
+
 	/* Register for driving external PHYs */
 	mii = devm_mdiobus_alloc(pdata->dev);
 	if (!mii) {
@@ -3071,4 +3188,10 @@ void xgbe_init_function_ptrs_phy_v2(stru
 	phy_impl->an_advertising	= xgbe_phy_an_advertising;
 
 	phy_impl->an_outcome		= xgbe_phy_an_outcome;
+
+	phy_impl->an_pre		= xgbe_phy_an_pre;
+	phy_impl->an_post		= xgbe_phy_an_post;
+
+	phy_impl->kr_training_pre	= xgbe_phy_kr_training_pre;
+	phy_impl->kr_training_post	= xgbe_phy_kr_training_post;
 }
--- a/drivers/net/ethernet/amd/xgbe/xgbe.h
+++ b/drivers/net/ethernet/amd/xgbe/xgbe.h
@@ -994,6 +994,7 @@ struct xgbe_version_data {
 	unsigned int irq_reissue_support;
 	unsigned int tx_desc_prefetch;
 	unsigned int rx_desc_prefetch;
+	unsigned int an_cdr_workaround;
 };
 
 struct xgbe_vxlan_data {
@@ -1262,6 +1263,9 @@ struct xgbe_prv_data {
 	unsigned int debugfs_xprop_reg;
 
 	unsigned int debugfs_xi2c_reg;
+
+	bool debugfs_an_cdr_workaround;
+	bool debugfs_an_cdr_track_early;
 };
 
 /* Function prototypes*/

  parent reply	other threads:[~2018-04-27 13:58 UTC|newest]

Thread overview: 88+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-27 13:58 [PATCH 4.16 00/81] 4.16.6-stable review Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 01/81] Revert "pinctrl: intel: Initialize GPIO properly when used through irqchip" Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 02/81] drm: bridge: dw-hdmi: Fix overflow workaround for Amlogic Meson GX SoCs Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 03/81] i40e: Fix attach VF to VM issue Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 04/81] tpm: cmd_ready command can be issued only after granting locality Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 05/81] tpm: tpm-interface: fix tpm_transmit/_cmd kdoc Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 06/81] tpm: add retry logic Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 07/81] Revert "ath10k: send (re)assoc peer command when NSS changed" Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 08/81] bonding: do not set slave_dev npinfo before slave_enable_netpoll in bond_enslave Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 09/81] docs: ip-sysctl.txt: fix name of some ipv6 variables Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 10/81] ipv6: add RTA_TABLE and RTA_PREFSRC to rtm_ipv6_policy Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 11/81] ipv6: sr: fix NULL pointer dereference in seg6_do_srh_encap()- v4 pkts Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 12/81] KEYS: DNS: limit the length of option strings Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 13/81] l2tp: check sockaddr length in pppol2tp_connect() Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 14/81] llc: delete timers synchronously in llc_sk_free() Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 15/81] net: af_packet: fix race in PACKET_{R|T}X_RING Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 16/81] net: fix deadlock while clearing neighbor proxy table Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 17/81] net: mvpp2: Fix DMA address mask size Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 18/81] net: qmi_wwan: add Wistron Neweb D19Q1 Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 19/81] net/smc: fix shutdown in state SMC_LISTEN Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 20/81] net: stmmac: Disable ACS Feature for GMAC >= 4 Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 21/81] packet: fix bitfield update race Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 22/81] pppoe: check sockaddr length in pppoe_connect() Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 23/81] Revert "macsec: missing dev_put() on error in macsec_newlink()" Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 24/81] sctp: do not check port in sctp_inet6_cmp_addr Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 25/81] strparser: Do not call mod_delayed_work with a timeout of LONG_MAX Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 26/81] strparser: Fix incorrect strp->need_bytes value Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 27/81] tcp: clear tp->packets_out when purging write queue Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 28/81] tcp: dont read out-of-bounds opsize Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 29/81] tcp: md5: reject TCP_MD5SIG or TCP_MD5SIG_EXT on established sockets Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 30/81] team: avoid adding twice the same option to the event list Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 31/81] team: fix netconsole setup over team Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 32/81] tipc: add policy for TIPC_NLA_NET_ADDR Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 33/81] vlan: Fix reading memory beyond skb->tail in skb_vlan_tagged_multi Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 34/81] vmxnet3: fix incorrect dereference when rxvlan is disabled Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 35/81] amd-xgbe: Add pre/post auto-negotiation phy hooks Greg Kroah-Hartman
2018-04-27 13:58 ` Greg Kroah-Hartman [this message]
2018-04-27 13:58 ` [PATCH 4.16 37/81] amd-xgbe: Only use the SFP supported transceiver signals Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 38/81] net: sched: ife: signal not finding metaid Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 39/81] net: sched: ife: handle malformed tlv length Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 40/81] net: sched: ife: check on metadata length Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 41/81] l2tp: hold reference on tunnels in netlink dumps Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 42/81] l2tp: hold reference on tunnels printed in pppol2tp proc file Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 43/81] l2tp: hold reference on tunnels printed in l2tp/tunnels debugfs file Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 44/81] l2tp: fix {pppol2tp, l2tp_dfs}_seq_stop() in case of seq_file overflow Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 45/81] llc: hold llc_sap before release_sock() Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 46/81] llc: fix NULL pointer deref for SOCK_ZAPPED Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 47/81] s390/qeth: fix error handling in adapter command callbacks Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 48/81] s390/qeth: avoid control IO completion stalls Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 49/81] s390/qeth: handle failure on workqueue creation Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 50/81] net: ethernet: ti: cpsw: fix tx vlan priority mapping Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 51/81] net: validate attribute sizes in neigh_dump_table() Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 52/81] bnxt_en: Fix memory fault in bnxt_ethtool_init() Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 53/81] virtio-net: add missing virtqueue kick when flushing packets Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 54/81] VSOCK: make af_vsock.ko removable again Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 55/81] net: aquantia: Regression on reset with 1.x firmware Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 56/81] tun: fix vlan packet truncation Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.16 57/81] net: aquantia: oops when shutdown on already stopped device Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.16 58/81] virtio_net: split out ctrl buffer Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.16 59/81] virtio_net: fix adding vids on big-endian Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.16 60/81] Revert "mm/hmm: fix header file if/else/endif maze" Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.16 61/81] commoncap: Handle memory allocation failure Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.16 62/81] scsi: mptsas: Disable WRITE SAME Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.16 63/81] cdrom: information leak in cdrom_ioctl_media_changed() Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.16 64/81] fsnotify: Fix fsnotify_mark_connector race Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.16 65/81] m68k/mac: Dont remap SWIM MMIO region Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.16 66/81] block/swim: Check drive type Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.16 67/81] block/swim: Dont log an error message for an invalid ioctl Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.16 68/81] block/swim: Remove extra put_disk() call from error path Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.16 69/81] block/swim: Rename macros to avoid inconsistent inverted logic Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.16 70/81] block/swim: Select appropriate drive on device open Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.16 71/81] block/swim: Fix array bounds check Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.16 72/81] block/swim: Fix IO error at end of medium Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.16 73/81] tracing: Fix missing tab for hwlat_detector print format Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.16 74/81] hwmon: (k10temp) Add temperature offset for Ryzen 2700X Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.16 75/81] hwmon: (k10temp) Add support for AMD Ryzen w/ Vega graphics Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.16 76/81] s390/cio: update chpid descriptor after resource accessibility event Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.16 77/81] s390/dasd: fix IO error for newly defined devices Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.16 78/81] s390/uprobes: implement arch_uretprobe_is_alive() Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.16 79/81] s390/cpum_cf: rename IBM z13/z14 counter names Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.16 80/81] kprobes: Fix random address output of blacklist file Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.16 81/81] ACPI / video: Only default only_lcd to true on Win8-ready _desktops_ Greg Kroah-Hartman
2018-04-27 18:15 ` [PATCH 4.16 00/81] 4.16.6-stable review Shuah Khan
2018-04-27 20:41 ` Dan Rue
2018-04-28  5:50   ` Greg Kroah-Hartman
2018-04-27 20:44 ` kernelci.org bot
2018-04-28 14:32 ` Guenter Roeck
2018-04-28 15:52   ` Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180427135745.073838548@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=thomas.lendacky@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).