LKML Archive on lore.kernel.org
 help / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Sibi Sankar <sibis@codeaurora.org>
Cc: andy.gross@linaro.org, david.brown@linaro.org,
	robh+dt@kernel.org, mark.rutland@arm.com,
	catalin.marinas@arm.com, will.deacon@arm.com,
	linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, linux-soc@vger.kernel.org
Subject: Re: [PATCH v2] arm64: dts: qcom: Add SDM845 SMEM nodes
Date: Mon, 30 Apr 2018 17:20:10 -0700
Message-ID: <20180501002009.GP18510@minitux> (raw)
In-Reply-To: <20180430144428.3288-1-sibis@codeaurora.org>

On Mon 30 Apr 07:44 PDT 2018, Sibi Sankar wrote:

> Add all the necessary dt nodes to support SMEM driver
> on SDM845. It also adds the required memory carveouts
> so that the kernel does not access memory that is in
> use.
> 
> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> ---
> 
> This patch depends on:
> https://patchwork.kernel.org/patch/10276419/
> https://patchwork.kernel.org/patch/10363361/
> 
>  arch/arm64/boot/dts/qcom/sdm845.dtsi | 38 ++++++++++++++++++++++++++++
>  1 file changed, 38 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index 9be763da0664..55e7d7e23b10 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -21,6 +21,27 @@
>  		reg = <0 0x80000000 0 0>;
>  	};
>  
> +	reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		memory@85fc0000 {
> +			reg = <0 0x85fc0000 0 0x20000>;
> +			no-map;
> +		};
> +
> +		smem_mem: memory@86000000 {
> +			reg = <0x0 0x86000000 0x0 0x200000>;
> +			no-map;
> +		};
> +
> +		memory@86200000 {
> +			reg = <0 0x86200000 0 0x2d00000>;
> +			no-map;
> +		};
> +	};
> +
>  	cpus {
>  		#address-cells = <2>;
>  		#size-cells = <0>;
> @@ -147,6 +168,18 @@
>  		};
>  	};
>  
> +	tcsr_mutex: hwlock {
> +		compatible = "qcom,tcsr-mutex";
> +		syscon = <&tcsr_mutex_regs 0 0x1000>;
> +		#hwlock-cells = <1>;
> +	};
> +
> +	smem {
> +		compatible = "qcom,smem";
> +		memory-region = <&smem_mem>;
> +		hwlocks = <&tcsr_mutex 3>;
> +	};
> +
>  	psci {
>  		compatible = "arm,psci-1.0";
>  		method = "smc";
> @@ -339,6 +372,11 @@
>  			};
>  		};
>  
> +		tcsr_mutex_regs: syscon@1f40000 {
> +			compatible = "syscon";
> +			reg = <0x1f40000 0x40000>;
> +		};
> +
>  		apss_shared: mailbox@17990000 {
>  			compatible = "qcom,sdm845-apss-shared";
>  			reg = <0x17990000 0x1000>;
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 

      reply index

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-30 14:44 Sibi Sankar
2018-05-01  0:20 ` Bjorn Andersson [this message]

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180501002009.GP18510@minitux \
    --to=bjorn.andersson@linaro.org \
    --cc=andy.gross@linaro.org \
    --cc=catalin.marinas@arm.com \
    --cc=david.brown@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=sibis@codeaurora.org \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org linux-kernel@archiver.kernel.org
	public-inbox-index lkml


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox