On Mon 2018-04-23 13:58:44, Sebastian Reichel wrote:
> The current reset-gpio support triggers an interrupt storm on platforms
> using the maxtouch with level based interrupt. The Motorola Droid 4,
> which I used for some of the tests is not affected, since it uses a edge
> based interrupt.
> 
> This change avoids the interrupt storm by enabling the device while its
> interrupt is disabled. Afterwards we wait 100ms. This is important for
> two reasons: The device is unresponsive for some time (~22ms for
> mxt224E) and the CHG (interrupt) line is not working properly for 100ms.
> We don't need to wait for any following interrupts, since the following
> mxt_initialize() checks for bootloader mode anyways.
> 
> This fixes a boot issue on GE PPD (watchdog kills device due to
> interrupt storm) and does not cause regression on Motorola Droid 4.

Out of curiosity, what is "GE PPD"?

> Fixes: f657b00df22e ("Input: atmel_mxt_ts - add support for reset line")
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

Reviewed-by: Pavel Machek <pavel@ucw.cz>

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html