From: David Lechner <david@lechnology.com>
To: linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>, Sekhar Nori <nsekhar@ti.com>,
Kevin Hilman <khilman@kernel.org>,
Bartosz Golaszewski <bgolaszewski@baylibre.com>,
Adam Ford <aford173@gmail.com>,
linux-kernel@vger.kernel.org,
David Lechner <david@lechnology.com>
Subject: [PATCH v10 00/27] ARM: davinci: convert to common clock framework
Date: Wed, 9 May 2018 12:25:39 -0500 [thread overview]
Message-ID: <20180509172606.29387-1-david@lechnology.com> (raw)
This series converts mach-davinci to use the common clock framework.
The series works like this, the first 3 patches fix some issues with the clock
drivers that have already been accepted into the mainline kernel.
Then, starting with "ARM: davinci: pass clock as parameter to
davinci_timer_init()", we get the mach code ready for the switch by adding the
code needed for the new clock drivers and adding #ifndef CONFIG_COMMON_CLK
around the legacy clocks so that we can switch easily between the old and the
new.
"ARM: davinci: switch to common clock framework" actually flips the switch
to start using the new clock drivers. Then the next 8 patches remove all
of the old clock code.
The final four patches add device tree clock support to the one SoC that
supports it.
This series has been tested on TI OMAP-L138 LCDK (both device tree and legacy
board file).
Changes:
v10 changes (also see individual patches for details):
- Reworked device tree bindings for DaVinci timer.
- Dropped helper functions to conditionally call devm_* versions of functions
- Fix some typos
- Fix some rebasing issues introduced in v9
v9 changes (also see individual patches for details):
- Rebased on linux-davnci/master (f5e3203bb775)
- Dropped drivers/clk patches that landed in v4.17
- New drivers/clk patches for early boot special case
- New patch for ti,davinci-timer device tree bindings
- Updated mach/davinci patches to register clocks in early boot when needed
v8 changes (also see individual patches for details):
- Rebased on linux-davinci/master
- Dropped use of __init and __initconst attributes in clk drivers
- Add clkdev lookups for PLL SYSCLKs
- Fix genpd clock reference counting issue
- Fix PSC clock driver loading order issue
- Fix typo in device tree and add more power-domains properties
v7 changes (also see individual patches for details):
- Rebased on linux-davinci/master (v4.16-rc)
- Convert clock drivers to platform devices
- New patch "ARM: davinci: pass clock as parameter to davinci_timer_init()"
- Fix issues with lcdk and aemif clock lookups and power domains
- Fixed other minor issues brought up in v6 review
v6 changes (also see individual patches for details):
- All of the device tree bindings are changed
- All of the clock drivers are changed significantly
- Fixed issues brought up during review of v5
- "ARM: davinci: move davinci_clk_init() to init_time" is removed from this
series and submitted separately
v5 changes:
- Basically, this is an entirely new series
- Patches are broken up into bite-sized pieces
- Converted PSC clock driver to use regmap
- Restored "force" flag for certain DA850 clocks
- Added device tree bindings
- Moved more of the clock init to drivers/clk
- Fixed frequency scaling (maybe*)
* I have frequency scaling using cpufreq-dt, so I know the clocks are doing
what they need to do to make this work, but I haven't figured out how to
test davinci-cpufreq driver yet. (Patches to make cpufreq-dt work will be
sent separately after this series has landed.)
Dependencies:
There are still some outstanding fixes to get everything working correctly.
These are all just runtime dependencies and only needed for certain platforms.
- "drm/tilcdc: Fix setting clock divider for omap-l138"[1]
- "clk: davinci: pll-dm355: fix SYSCLKn parent names"[2]
- "remoteproc/davinci: common clock framework related fixes"[3]
[1]: https://patchwork.freedesktop.org/patch/210696/
[2]: https://lkml.org/lkml/2018/5/9/626
[3]: https://lkml.org/lkml/2018/5/2/201
You can find a working branch with everything included (plus a few extras, like
cpufreq-dt) in the "common-clk-v10" branch of https://github.com/dlech/ev3dev-kernel.git.
Testing/debugging for the uninitiated:
I only have one device to test with, which is based on da850, so I will
have to rely on others to do some testing here. Since we are dealing with
clocks, if something isn't working, you most likely won't see output on
the serial port. To figure out what is going on, you need to enable...
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y
and add "earlyprintk clk_ignore_unused" to the kernel command line options.
You may need to select a different UART for this depending on your board. I
think UART1 is the default in the kernel configuration.
On da850 devices comment out the lines:
/* pll1_sysclk2 is not affected by CPU scaling, so use it for async3 */
parent = clk_hw_get_parent_by_index(&mux->hw, 1);
if (parent)
clk_set_parent(mux->hw.clk, parent->clk);
else
dev_warn(dev, "Failed to find async3 parent clock\n");
in da8xx-cfgchip.c or, if using device tree, comment out the lines:
assigned-clocks = <&async3_clk>;
assigned-clock-parents = <&pll1_sysclk 2>;
in da850.dtsi when doing earlyprintk, otherwise the UART1 and UART2 clock
source will change during boot and cause garbled output after a point.
David Lechner (27):
clk: davinci: pll: allow dev == NULL
clk: davinci: da850-pll: change PLL0 to CLK_OF_DECLARE
clk: davinci: psc: allow for dev == NULL
ARM: davinci: pass clock as parameter to davinci_timer_init()
ARM: davinci: da830: add new clock init using common clock framework
ARM: davinci: da850: add new clock init using common clock framework
ARM: davinci: dm355: add new clock init using common clock framework
ARM: davinci: dm365: add new clock init using common clock framework
ARM: davinci: dm644x: add new clock init using common clock framework
ARM: davinci: dm646x: add new clock init using common clock framework
ARM: davinci: da8xx: add new USB PHY clock init using common clock
framework
ARM: davinci: da8xx: add new sata_refclk init using common clock
framework
ARM: davinci: remove CONFIG_DAVINCI_RESET_CLOCKS
ARM: davinci_all_defconfig: remove CONFIG_DAVINCI_RESET_CLOCKS
ARM: davinci: switch to common clock framework
ARM: davinci: da830: Remove legacy clock init
ARM: davinci: da850: Remove legacy clock init
ARM: davinci: dm355: Remove legacy clock init
ARM: davinci: dm365: Remove legacy clock init
ARM: davinci: dm644x: Remove legacy clock init
ARM: davinci: dm646x: Remove legacy clock init
ARM: davinci: da8xx: Remove legacy USB and SATA clock init
ARM: davinci: remove legacy clocks
dt-bindings: timer: new bindings for TI DaVinci timer
ARM: davinci: add device tree support to timer
ARM: davinci: da8xx-dt: switch to device tree clocks
ARM: dts: da850: Add clocks
.../bindings/timer/ti,davinci-timer.txt | 37 +
arch/arm/Kconfig | 5 +-
arch/arm/boot/dts/da850-enbw-cmc.dts | 4 +
arch/arm/boot/dts/da850-evm.dts | 4 +
arch/arm/boot/dts/da850-lcdk.dts | 9 +
arch/arm/boot/dts/da850-lego-ev3.dts | 4 +
arch/arm/boot/dts/da850.dtsi | 168 ++++
arch/arm/configs/davinci_all_defconfig | 1 -
arch/arm/mach-davinci/Kconfig | 13 +-
arch/arm/mach-davinci/Makefile | 4 +-
arch/arm/mach-davinci/board-da830-evm.c | 12 +-
arch/arm/mach-davinci/board-da850-evm.c | 2 +
arch/arm/mach-davinci/board-dm355-evm.c | 2 +
arch/arm/mach-davinci/board-dm355-leopard.c | 2 +
arch/arm/mach-davinci/board-dm365-evm.c | 2 +
arch/arm/mach-davinci/board-dm644x-evm.c | 2 +
arch/arm/mach-davinci/board-dm646x-evm.c | 2 +
arch/arm/mach-davinci/board-mityomapl138.c | 2 +
arch/arm/mach-davinci/board-neuros-osd2.c | 2 +
arch/arm/mach-davinci/board-omapl138-hawk.c | 11 +-
arch/arm/mach-davinci/board-sffsdr.c | 2 +
arch/arm/mach-davinci/clock.c | 745 -----------------
arch/arm/mach-davinci/clock.h | 76 --
arch/arm/mach-davinci/common.c | 3 -
arch/arm/mach-davinci/da830.c | 462 ++---------
arch/arm/mach-davinci/da850.c | 778 +++---------------
arch/arm/mach-davinci/da8xx-dt.c | 66 --
arch/arm/mach-davinci/davinci.h | 8 +
arch/arm/mach-davinci/devices-da8xx.c | 43 +-
arch/arm/mach-davinci/devices.c | 1 -
arch/arm/mach-davinci/dm355.c | 406 ++-------
arch/arm/mach-davinci/dm365.c | 485 +----------
arch/arm/mach-davinci/dm644x.c | 344 +-------
arch/arm/mach-davinci/dm646x.c | 372 +--------
arch/arm/mach-davinci/include/mach/clock.h | 3 -
arch/arm/mach-davinci/include/mach/common.h | 11 +-
arch/arm/mach-davinci/include/mach/da8xx.h | 6 +-
arch/arm/mach-davinci/pm_domain.c | 5 +
arch/arm/mach-davinci/psc.c | 137 ---
arch/arm/mach-davinci/psc.h | 12 -
arch/arm/mach-davinci/time.c | 39 +-
arch/arm/mach-davinci/usb-da8xx.c | 242 +-----
drivers/clk/davinci/pll-da830.c | 4 +-
drivers/clk/davinci/pll-da850.c | 36 +-
drivers/clk/davinci/pll-dm355.c | 8 +-
drivers/clk/davinci/pll-dm365.c | 8 +-
drivers/clk/davinci/pll-dm644x.c | 8 +-
drivers/clk/davinci/pll-dm646x.c | 8 +-
drivers/clk/davinci/pll.c | 110 +--
drivers/clk/davinci/pll.h | 30 +-
drivers/clk/davinci/psc-dm355.c | 2 +-
drivers/clk/davinci/psc-dm365.c | 2 +-
drivers/clk/davinci/psc-dm644x.c | 2 +-
drivers/clk/davinci/psc-dm646x.c | 2 +-
drivers/clk/davinci/psc.c | 27 +-
include/linux/clk/davinci.h | 29 +
56 files changed, 860 insertions(+), 3950 deletions(-)
create mode 100644 Documentation/devicetree/bindings/timer/ti,davinci-timer.txt
delete mode 100644 arch/arm/mach-davinci/clock.c
delete mode 100644 arch/arm/mach-davinci/psc.c
create mode 100644 include/linux/clk/davinci.h
--
2.17.0
next reply other threads:[~2018-05-09 17:31 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-09 17:25 David Lechner [this message]
2018-05-09 17:25 ` [PATCH v10 01/27] clk: davinci: pll: allow dev == NULL David Lechner
2018-05-09 17:25 ` [PATCH v10 02/27] clk: davinci: da850-pll: change PLL0 to CLK_OF_DECLARE David Lechner
2018-05-15 13:31 ` Sekhar Nori
2018-05-15 15:42 ` David Lechner
2018-05-16 5:51 ` Sekhar Nori
2018-05-09 17:25 ` [PATCH v10 03/27] clk: davinci: psc: allow for dev == NULL David Lechner
2018-05-15 13:42 ` Sekhar Nori
2018-05-09 17:25 ` [PATCH v10 04/27] ARM: davinci: pass clock as parameter to davinci_timer_init() David Lechner
2018-05-09 17:25 ` [PATCH v10 05/27] ARM: davinci: da830: add new clock init using common clock framework David Lechner
2018-05-09 17:25 ` [PATCH v10 06/27] ARM: davinci: da850: " David Lechner
2018-05-09 17:25 ` [PATCH v10 07/27] ARM: davinci: dm355: " David Lechner
2018-05-09 17:25 ` [PATCH v10 08/27] ARM: davinci: dm365: " David Lechner
2018-05-09 17:25 ` [PATCH v10 09/27] ARM: davinci: dm644x: " David Lechner
2018-05-09 17:25 ` [PATCH v10 10/27] ARM: davinci: dm646x: " David Lechner
2018-05-09 17:25 ` [PATCH v10 11/27] ARM: davinci: da8xx: add new USB PHY " David Lechner
2018-05-09 17:25 ` [PATCH v10 12/27] ARM: davinci: da8xx: add new sata_refclk " David Lechner
2018-05-09 17:25 ` [PATCH v10 13/27] ARM: davinci: remove CONFIG_DAVINCI_RESET_CLOCKS David Lechner
2018-05-09 17:25 ` [PATCH v10 14/27] ARM: davinci_all_defconfig: " David Lechner
2018-05-09 17:25 ` [PATCH v10 15/27] ARM: davinci: switch to common clock framework David Lechner
2018-05-09 17:25 ` [PATCH v10 16/27] ARM: davinci: da830: Remove legacy clock init David Lechner
2018-05-09 17:25 ` [PATCH v10 17/27] ARM: davinci: da850: " David Lechner
2018-05-09 17:25 ` [PATCH v10 18/27] ARM: davinci: dm355: " David Lechner
2018-05-09 17:25 ` [PATCH v10 19/27] ARM: davinci: dm365: " David Lechner
2018-05-09 17:25 ` [PATCH v10 20/27] ARM: davinci: dm644x: " David Lechner
2018-05-09 17:26 ` [PATCH v10 21/27] ARM: davinci: dm646x: " David Lechner
2018-05-09 17:26 ` [PATCH v10 22/27] ARM: davinci: da8xx: Remove legacy USB and SATA " David Lechner
2018-05-09 17:26 ` [PATCH v10 23/27] ARM: davinci: remove legacy clocks David Lechner
2018-05-09 17:26 ` [PATCH v10 24/27] dt-bindings: timer: new bindings for TI DaVinci timer David Lechner
2018-05-18 14:24 ` Rob Herring
2018-05-09 17:26 ` [PATCH v10 25/27] ARM: davinci: add device tree support to timer David Lechner
2018-05-17 14:35 ` Sekhar Nori
2018-05-17 15:09 ` David Lechner
2018-05-18 6:05 ` Sekhar Nori
2018-05-18 15:35 ` David Lechner
2018-05-09 17:26 ` [PATCH v10 26/27] ARM: davinci: da8xx-dt: switch to device tree clocks David Lechner
2018-05-09 17:26 ` [PATCH v10 27/27] ARM: dts: da850: Add clocks David Lechner
2018-05-11 15:26 ` [PATCH v10 00/27] ARM: davinci: convert to common clock framework Sekhar Nori
2018-05-12 21:11 ` David Lechner
2018-05-14 0:40 ` Adam Ford
2018-05-14 1:50 ` David Lechner
2018-05-15 9:25 ` Bartosz Golaszewski
2018-05-15 22:44 ` Adam Ford
2018-05-16 0:31 ` David Lechner
2018-05-16 7:47 ` Bartosz Golaszewski
2018-05-16 10:43 ` Sekhar Nori
2018-05-17 0:46 ` Adam Ford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180509172606.29387-1-david@lechnology.com \
--to=david@lechnology.com \
--cc=aford173@gmail.com \
--cc=bgolaszewski@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=khilman@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=nsekhar@ti.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).