linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alexandru Gagniuc <mr.nuke.me@gmail.com>
To: bp@alien8.de
Cc: alex_gagniuc@dellteam.com, austin_bolen@dell.com,
	shyam_iyer@dell.com, Alexandru Gagniuc <mr.nuke.me@gmail.com>,
	"Rafael J. Wysocki" <rjw@rjwysocki.net>,
	Len Brown <lenb@kernel.org>, Tony Luck <tony.luck@intel.com>,
	Tyler Baicar <tbaicar@codeaurora.org>,
	Will Deacon <will.deacon@arm.com>,
	James Morse <james.morse@arm.com>,
	Shiju Jose <shiju.jose@huawei.com>,
	"Jonathan (Zhixiong) Zhang" <zjzhang@codeaurora.org>,
	Dongjiu Geng <gengdongjiu@huawei.com>,
	linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v5 1/2] acpi: apei: Rename ghes_severity() to ghes_cper_severity()
Date: Mon, 14 May 2018 09:59:28 -0500	[thread overview]
Message-ID: <20180514145933.10291-2-mr.nuke.me@gmail.com> (raw)
In-Reply-To: <20180514145933.10291-1-mr.nuke.me@gmail.com>

ghes_severity() is a misnomer in this case, as it implies the severity
of the entire GHES structure. Instead, it maps one CPER value to a
GHES_SEV* value. ghes_cper_severity() is clearer.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
---
 drivers/acpi/apei/ghes.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
index 1efefe919555..7c1a16b106ba 100644
--- a/drivers/acpi/apei/ghes.c
+++ b/drivers/acpi/apei/ghes.c
@@ -271,7 +271,7 @@ static void ghes_fini(struct ghes *ghes)
 		unmap_gen_v2(ghes);
 }
 
-static inline int ghes_severity(int severity)
+static inline int ghes_cper_severity(int severity)
 {
 	switch (severity) {
 	case CPER_SEV_INFORMATIONAL:
@@ -388,7 +388,7 @@ static void ghes_handle_memory_failure(struct acpi_hest_generic_data *gdata, int
 #ifdef CONFIG_ACPI_APEI_MEMORY_FAILURE
 	unsigned long pfn;
 	int flags = -1;
-	int sec_sev = ghes_severity(gdata->error_severity);
+	int sec_sev = ghes_cper_severity(gdata->error_severity);
 	struct cper_sec_mem_err *mem_err = acpi_hest_get_payload(gdata);
 
 	if (!(mem_err->validation_bits & CPER_MEM_VALID_PA))
@@ -468,10 +468,10 @@ static void ghes_do_proc(struct ghes *ghes,
 	guid_t *fru_id = &NULL_UUID_LE;
 	char *fru_text = "";
 
-	sev = ghes_severity(estatus->error_severity);
+	sev = ghes_cper_severity(estatus->error_severity);
 	apei_estatus_for_each_section(estatus, gdata) {
 		sec_type = (guid_t *)gdata->section_type;
-		sec_sev = ghes_severity(gdata->error_severity);
+		sec_sev = ghes_cper_severity(gdata->error_severity);
 		if (gdata->validation_bits & CPER_SEC_VALID_FRU_ID)
 			fru_id = (guid_t *)gdata->fru_id;
 
@@ -512,7 +512,7 @@ static void __ghes_print_estatus(const char *pfx,
 	char pfx_seq[64];
 
 	if (pfx == NULL) {
-		if (ghes_severity(estatus->error_severity) <=
+		if (ghes_cper_severity(estatus->error_severity) <=
 		    GHES_SEV_CORRECTED)
 			pfx = KERN_WARNING;
 		else
@@ -534,7 +534,7 @@ static int ghes_print_estatus(const char *pfx,
 	static DEFINE_RATELIMIT_STATE(ratelimit_uncorrected, 5*HZ, 2);
 	struct ratelimit_state *ratelimit;
 
-	if (ghes_severity(estatus->error_severity) <= GHES_SEV_CORRECTED)
+	if (ghes_cper_severity(estatus->error_severity) <= GHES_SEV_CORRECTED)
 		ratelimit = &ratelimit_corrected;
 	else
 		ratelimit = &ratelimit_uncorrected;
@@ -705,9 +705,8 @@ static int ghes_proc(struct ghes *ghes)
 	if (rc)
 		goto out;
 
-	if (ghes_severity(ghes->estatus->error_severity) >= GHES_SEV_PANIC) {
+	if (ghes_cper_severity(ghes->estatus->error_severity) >= GHES_SEV_PANIC)
 		__ghes_panic(ghes);
-	}
 
 	if (!ghes_estatus_cached(ghes->estatus)) {
 		if (ghes_print_estatus(NULL, ghes->generic, ghes->estatus))
@@ -945,7 +944,7 @@ static int ghes_notify_nmi(unsigned int cmd, struct pt_regs *regs)
 			ret = NMI_HANDLED;
 		}
 
-		sev = ghes_severity(ghes->estatus->error_severity);
+		sev = ghes_cper_severity(ghes->estatus->error_severity);
 		if (sev >= GHES_SEV_PANIC) {
 			oops_begin();
 			ghes_print_queued_estatus();
-- 
2.14.3

  reply	other threads:[~2018-05-14 14:59 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20180430212836.7807-1-mr.nuke.me@gmail.com>
2018-04-30 21:33 ` [RFC PATCH v4 1/3] EDAC, GHES: Remove unused argument to ghes_edac_report_mem_error Alexandru Gagniuc
2018-04-30 21:33   ` [RFC PATCH v4 2/3] acpi: apei: Rename ghes_severity() to ghes_cper_severity() Alexandru Gagniuc
2018-05-04 11:56     ` Shiju Jose
2018-05-04 23:33       ` Alex G.
2018-05-11 15:39     ` Borislav Petkov
2018-05-11 15:45       ` Alex G.
2018-05-11 15:58         ` Borislav Petkov
2018-05-11 16:12           ` Alex G.
2018-05-11 16:19             ` Borislav Petkov
2018-05-11 17:03               ` Alex G.
2018-04-30 21:33   ` [RFC PATCH v4 3/3] acpi: apei: Do not panic() on PCIe errors reported through GHES Alexandru Gagniuc
2018-05-11 15:40     ` Borislav Petkov
2018-05-11 15:54       ` Alex G.
2018-05-11 16:02         ` Borislav Petkov
2018-05-11 16:12           ` Alex G.
2018-05-11 16:29             ` Borislav Petkov
2018-05-11 17:01               ` Alex G.
2018-05-11 17:41                 ` Borislav Petkov
2018-05-11 17:56                   ` Alex G.
2018-05-12  9:00   ` [RFC PATCH v4 1/3] EDAC, GHES: Remove unused argument to ghes_edac_report_mem_error Borislav Petkov
2018-05-14 14:59 ` [PATCH v5 0/2] acpi: apei: Improve PCIe error handling with FFS Alexandru Gagniuc
2018-05-14 14:59   ` Alexandru Gagniuc [this message]
2018-05-14 14:59   ` [PATCH v5 2/2] acpi: apei: Do not panic() on PCIe errors reported through GHES Alexandru Gagniuc

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180514145933.10291-2-mr.nuke.me@gmail.com \
    --to=mr.nuke.me@gmail.com \
    --cc=alex_gagniuc@dellteam.com \
    --cc=austin_bolen@dell.com \
    --cc=bp@alien8.de \
    --cc=gengdongjiu@huawei.com \
    --cc=james.morse@arm.com \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rjw@rjwysocki.net \
    --cc=shiju.jose@huawei.com \
    --cc=shyam_iyer@dell.com \
    --cc=tbaicar@codeaurora.org \
    --cc=tony.luck@intel.com \
    --cc=will.deacon@arm.com \
    --cc=zjzhang@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).