From: John Whitmore <johnfwhitmore@gmail.com>
To: gregkh@linuxfoundation.org
Cc: kstewart@linuxfoundation.org, devel@driverdev.osuosl.org,
linux-kernel@vger.kernel.org, johnfwhitmore@gmail.com,
colin.king@canonical.com, tglx@linutronix.de
Subject: [PATCH 04/13] coding style corrections, spaces around ', ' characters and removal of blank lines
Date: Mon, 14 May 2018 16:53:09 +0100 [thread overview]
Message-ID: <20180514155318.32195-5-johnfwhitmore@gmail.com> (raw)
In-Reply-To: <20180514155318.32195-1-johnfwhitmore@gmail.com>
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
---
.../staging/rtl8192u/ieee80211/rtl819x_HTProc.c | 134 +++++++--------------
1 file changed, 42 insertions(+), 92 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index 9366b62343af..110fa8ba15db 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -7,28 +7,28 @@ u8 MCS_FILTER_ALL[16] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0
u8 MCS_FILTER_1SS[16] = {0xff, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
-u16 MCS_DATA_RATE[2][2][77] =
- { { {13, 26, 39, 52, 78, 104, 117, 130, 26, 52, 78 ,104, 156, 208, 234, 260,
- 39, 78, 117, 234, 312, 351, 390, 52, 104, 156, 208, 312, 416, 468, 520,
- 0, 78, 104, 130, 117, 156, 195, 104, 130, 130, 156, 182, 182, 208, 156, 195,
- 195, 234, 273, 273, 312, 130, 156, 181, 156, 181, 208, 234, 208, 234, 260, 260,
- 286, 195, 234, 273, 234, 273, 312, 351, 312, 351, 390, 390, 429}, // Long GI, 20MHz
- {14, 29, 43, 58, 87, 116, 130, 144, 29, 58, 87, 116, 173, 231, 260, 289,
- 43, 87, 130, 173, 260, 347, 390, 433, 58, 116, 173, 231, 347, 462, 520, 578,
- 0, 87, 116, 144, 130, 173, 217, 116, 144, 144, 173, 202, 202, 231, 173, 217,
- 217, 260, 303, 303, 347, 144, 173, 202, 173, 202, 231, 260, 231, 260, 289, 289,
- 318, 217, 260, 303, 260, 303, 347, 390, 347, 390, 433, 433, 477} }, // Short GI, 20MHz
- { {27, 54, 81, 108, 162, 216, 243, 270, 54, 108, 162, 216, 324, 432, 486, 540,
- 81, 162, 243, 324, 486, 648, 729, 810, 108, 216, 324, 432, 648, 864, 972, 1080,
- 12, 162, 216, 270, 243, 324, 405, 216, 270, 270, 324, 378, 378, 432, 324, 405,
- 405, 486, 567, 567, 648, 270, 324, 378, 324, 378, 432, 486, 432, 486, 540, 540,
- 594, 405, 486, 567, 486, 567, 648, 729, 648, 729, 810, 810, 891}, // Long GI, 40MHz
- {30, 60, 90, 120, 180, 240, 270, 300, 60, 120, 180, 240, 360, 480, 540, 600,
- 90, 180, 270, 360, 540, 720, 810, 900, 120, 240, 360, 480, 720, 960, 1080, 1200,
- 13, 180, 240, 300, 270, 360, 450, 240, 300, 300, 360, 420, 420, 480, 360, 450,
- 450, 540, 630, 630, 720, 300, 360, 420, 360, 420, 480, 540, 480, 540, 600, 600,
- 660, 450, 540, 630, 540, 630, 720, 810, 720, 810, 900, 900, 990} } // Short GI, 40MHz
- };
+u16 MCS_DATA_RATE[2][2][77] = {
+ { {13, 26, 39, 52, 78, 104, 117, 130, 26, 52, 78, 104, 156, 208, 234, 260,
+ 39, 78, 117, 234, 312, 351, 390, 52, 104, 156, 208, 312, 416, 468, 520,
+ 0, 78, 104, 130, 117, 156, 195, 104, 130, 130, 156, 182, 182, 208, 156, 195,
+ 195, 234, 273, 273, 312, 130, 156, 181, 156, 181, 208, 234, 208, 234, 260, 260,
+ 286, 195, 234, 273, 234, 273, 312, 351, 312, 351, 390, 390, 429}, // Long GI, 20MHz
+ {14, 29, 43, 58, 87, 116, 130, 144, 29, 58, 87, 116, 173, 231, 260, 289,
+ 43, 87, 130, 173, 260, 347, 390, 433, 58, 116, 173, 231, 347, 462, 520, 578,
+ 0, 87, 116, 144, 130, 173, 217, 116, 144, 144, 173, 202, 202, 231, 173, 217,
+ 217, 260, 303, 303, 347, 144, 173, 202, 173, 202, 231, 260, 231, 260, 289, 289,
+ 318, 217, 260, 303, 260, 303, 347, 390, 347, 390, 433, 433, 477} }, // Short GI, 20MHz
+ { {27, 54, 81, 108, 162, 216, 243, 270, 54, 108, 162, 216, 324, 432, 486, 540,
+ 81, 162, 243, 324, 486, 648, 729, 810, 108, 216, 324, 432, 648, 864, 972, 1080,
+ 12, 162, 216, 270, 243, 324, 405, 216, 270, 270, 324, 378, 378, 432, 324, 405,
+ 405, 486, 567, 567, 648, 270, 324, 378, 324, 378, 432, 486, 432, 486, 540, 540,
+ 594, 405, 486, 567, 486, 567, 648, 729, 648, 729, 810, 810, 891}, // Long GI, 40MHz
+ {30, 60, 90, 120, 180, 240, 270, 300, 60, 120, 180, 240, 360, 480, 540, 600,
+ 90, 180, 270, 360, 540, 720, 810, 900, 120, 240, 360, 480, 720, 960, 1080, 1200,
+ 13, 180, 240, 300, 270, 360, 450, 240, 300, 300, 360, 420, 420, 480, 360, 450,
+ 450, 540, 630, 630, 720, 300, 360, 420, 360, 420, 480, 540, 480, 540, 600, 600,
+ 660, 450, 540, 630, 540, 630, 720, 810, 720, 810, 900, 900, 990} } // Short GI, 40MHz
+};
static u8 UNKNOWN_BORADCOM[3] = {0x00, 0x14, 0xbf};
static u8 LINKSYSWRT330_LINKSYSWRT300_BROADCOM[3] = {0x00, 0x1a, 0x70};
@@ -44,7 +44,7 @@ static u8 CISCO_BROADCOM[3] = {0x00, 0x17, 0x94};
/*
* 2008/04/01 MH For Cisco G mode RX TP We need to change FW duration. Should we
- * put the code in other place??
+ * put the code in other place??
* static u8 WIFI_CISCO_G_AP[3] = {0x00, 0x40, 0x96};
*/
/*******************************************************************************
@@ -114,12 +114,10 @@ void HTUpdateDefaultSetting(struct ieee80211_device *ieee)
pHTInfo->UsbRxFwAggrPacketNum = 8;
pHTInfo->UsbRxFwAggrTimeout = 16; ////usb rx FW aggregation timeout threshold.It's in units of 64us
#endif
-
-
}
/*******************************************************************************
- *function: This function print out each field on HT capability IE mainly
+ *function: This function print out each field on HT capability IE mainly
* from (Beacon/ProbeRsp/AssocReq)
* input: u8* CapIE //Capability IE to be printed out
* u8* TitleString //mainly print out caller function
@@ -128,9 +126,8 @@ void HTUpdateDefaultSetting(struct ieee80211_device *ieee)
* notice: Driver should not print out this message by default.
*******************************************************************************
*/
-void HTDebugHTCapability(u8 *CapIE, u8 *TitleString )
+void HTDebugHTCapability(u8 *CapIE, u8 *TitleString)
{
-
static u8 EWC11NHTCap[] = {0x00, 0x90, 0x4c, 0x33}; // For 11n EWC definition, 2007.07.17, by Emily
PHT_CAPABILITY_ELE pCapELE;
@@ -141,7 +138,7 @@ void HTDebugHTCapability(u8 *CapIE, u8 *TitleString )
} else {
pCapELE = (PHT_CAPABILITY_ELE)(&CapIE[0]);
}
- IEEE80211_DEBUG(IEEE80211_DL_HT, "<Log HT Capability>. Called by %s\n", TitleString );
+ IEEE80211_DEBUG(IEEE80211_DL_HT, "<Log HT Capability>. Called by %s\n", TitleString);
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupported Channel Width = %s\n", (pCapELE->ChlWidth)?"20MHz": "20/40MHz");
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupport Short GI for 20M = %s\n", (pCapELE->ShortGI20Mhz)?"YES": "NO");
@@ -154,11 +151,10 @@ void HTDebugHTCapability(u8 *CapIE, u8 *TitleString )
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tMCS Rate Set = [%x][%x][%x][%x][%x]\n", pCapELE->MCS[0],\
pCapELE->MCS[1], pCapELE->MCS[2], pCapELE->MCS[3], pCapELE->MCS[4]);
return;
-
}
/*******************************************************************************
- *function: This function print out each field on HT Information IE mainly
+ *function: This function print out each field on HT Information IE mainly
* from (Beacon/ProbeRsp)
* input: u8* InfoIE //Capability IE to be printed out
* u8* TitleString //mainly print out caller function
@@ -169,7 +165,6 @@ void HTDebugHTCapability(u8 *CapIE, u8 *TitleString )
*/
void HTDebugHTInfo(u8 *InfoIE, u8 *TitleString)
{
-
static u8 EWC11NHTInfo[] = {0x00, 0x90, 0x4c, 0x34}; // For 11n EWC definition, 2007.07.17, by Emily
PHT_INFORMATION_ELE pHTInfoEle;
@@ -270,7 +265,6 @@ static bool IsHTHalfNmodeSGI(struct ieee80211_device *ieee, bool is40MHz)
u16 HTHalfMcsToDataRate(struct ieee80211_device *ieee, u8 nMcsRate)
{
-
u8 is40MHz;
u8 isShortGI;
@@ -280,7 +274,6 @@ u16 HTHalfMcsToDataRate(struct ieee80211_device *ieee, u8 nMcsRate)
return MCS_DATA_RATE[is40MHz][isShortGI][(nMcsRate&0x7f)];
}
-
u16 HTMcsToDataRate(struct ieee80211_device *ieee, u8 nMcsRate)
{
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
@@ -304,7 +297,7 @@ u16 HTMcsToDataRate(struct ieee80211_device *ieee, u8 nMcsRate)
u16 TxCountToDataRate(struct ieee80211_device *ieee, u8 nDataRate)
{
//PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
- u16 CCKOFDMRate[12] = {0x02 , 0x04 , 0x0b , 0x16 , 0x0c , 0x12 , 0x18 , 0x24 , 0x30 , 0x48 , 0x60 , 0x6c};
+ u16 CCKOFDMRate[12] = {0x02, 0x04, 0x0b, 0x16, 0x0c, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6c};
u8 is40MHz = 0;
u8 isShortGI = 0;
@@ -316,17 +309,17 @@ u16 TxCountToDataRate(struct ieee80211_device *ieee, u8 nDataRate)
isShortGI = 0;
// nDataRate = nDataRate - 12;
- } else if (nDataRate >=0x20 && nDataRate <= 0x2f ) { //(27, 44)
+ } else if (nDataRate >=0x20 && nDataRate <= 0x2f) { //(27, 44)
is40MHz = 1;
isShortGI = 0;
//nDataRate = nDataRate - 28;
- } else if (nDataRate >= 0x30 && nDataRate <= 0x3f ) { //(43, 60)
+ } else if (nDataRate >= 0x30 && nDataRate <= 0x3f) { //(43, 60)
is40MHz = 0;
isShortGI = 1;
//nDataRate = nDataRate - 44;
- } else if(nDataRate >= 0x40 && nDataRate <= 0x4f ) { //(59, 76)
+ } else if (nDataRate >= 0x40 && nDataRate <= 0x4f) { //(59, 76)
is40MHz = 1;
isShortGI = 1;
@@ -336,8 +329,6 @@ u16 TxCountToDataRate(struct ieee80211_device *ieee, u8 nDataRate)
}
}
-
-
bool IsHTHalfNmodeAPs(struct ieee80211_device *ieee)
{
bool retValue = false;
@@ -382,7 +373,7 @@ static void HTIOTPeerDetermine(struct ieee80211_device *ieee)
else if ((memcmp(net->bssid, UNKNOWN_BORADCOM, 3)==0) ||
(memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3)==0)||
(memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3)==0)||
- (memcmp(net->bssid, NETGEAR834Bv2_BROADCOM, 3)==0) )
+ (memcmp(net->bssid, NETGEAR834Bv2_BROADCOM, 3)==0))
pHTInfo->IOTPeer = HT_IOT_PEER_BROADCOM;
else if ((memcmp(net->bssid, BELKINF5D8233V1_RALINK, 3)==0) ||
(memcmp(net->bssid, BELKINF5D82334V3_RALINK, 3)==0) ||
@@ -413,8 +404,7 @@ static void HTIOTPeerDetermine(struct ieee80211_device *ieee)
static u8 HTIOTActIsDisableMCS14(struct ieee80211_device *ieee, u8 *PeerMacAddr)
{
return 0;
- }
-
+}
/**
* Function: HTIOTActIsDisableMCS15
@@ -517,16 +507,13 @@ static u8 HTIOTActIsCCDFsync(u8 *PeerMacAddr)
u8 retValue = 0;
if ((memcmp(PeerMacAddr, UNKNOWN_BORADCOM, 3)==0) ||
(memcmp(PeerMacAddr, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3)==0) ||
- (memcmp(PeerMacAddr, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3) ==0)) {
+ (memcmp(PeerMacAddr, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3) ==0))
retValue = 1;
- }
return retValue;
}
-void HTResetIOTSetting(
- PRT_HIGH_THROUGHPUT pHTInfo
-)
+void HTResetIOTSetting(PRT_HIGH_THROUGHPUT pHTInfo)
{
pHTInfo->IOTAction = 0;
pHTInfo->IOTPeer = HT_IOT_PEER_UNKNOWN;
@@ -558,12 +545,10 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
u8 EWC11NHTCap[] = {0x00, 0x90, 0x4c, 0x33}; // For 11n EWC definition, 2007.07.17, by Emily
memcpy(posHTCap, EWC11NHTCap, sizeof(EWC11NHTCap));
pCapELE = (PHT_CAPABILITY_ELE)&(posHTCap[4]);
- }else
- {
+ } else {
pCapELE = (PHT_CAPABILITY_ELE)posHTCap;
}
-
//HT capability info
pCapELE->AdvCoding = 0; // This feature is not supported now!!
if (ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev))
@@ -586,7 +571,6 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
pCapELE->PSMP = 0; // Do not support now!!
pCapELE->LSigTxopProtect = 0; // Do not support now!!
-
//MAC HT parameters info
// TODO: Nedd to take care of this part
IEEE80211_DEBUG(IEEE80211_DL_HT, "TX HT cap/info ele BW=%d MaxAMSDUSize:%d DssCCk:%d\n", pCapELE->ChlWidth, pCapELE->MaxAMSDUSize, pCapELE->DssCCk);
@@ -621,7 +605,6 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
//Extended HT Capability Info
memset(&pCapELE->ExtHTCapInfo, 0, 2);
-
//TXBF Capabilities
memset(pCapELE->TxBFCap, 0, 4);
@@ -633,14 +616,11 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
else
*len = 26 + 2;
-
-
// IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA | IEEE80211_DL_HT, posHTCap, *len -2);
//Print each field in detail. Driver should not print out this message by default
// HTDebugHTCapability(posHTCap, (u8*)"HTConstructCapability()");
return;
-
}
/*******************************************************************************
@@ -668,26 +648,24 @@ void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *le
memset(posHTInfo, 0, *len);
if ( (ieee->iw_mode == IW_MODE_ADHOC) || (ieee->iw_mode == IW_MODE_MASTER)) { //ap mode is not currently supported
pHTInfoEle->ControlChl = ieee->current_network.channel;
- pHTInfoEle->ExtChlOffset = ((!pHT->bRegBW40MHz)?HT_EXTCHNL_OFFSET_NO_EXT:
+ pHTInfoEle->ExtChlOffset = ((!pHT->bRegBW40MHz)?HT_EXTCHNL_OFFSET_NO_EXT:
(ieee->current_network.channel<=6)?
HT_EXTCHNL_OFFSET_UPPER:HT_EXTCHNL_OFFSET_LOWER);
pHTInfoEle->RecommemdedTxWidth = pHT->bRegBW40MHz;
- pHTInfoEle->RIFS = 0;
+ pHTInfoEle->RIFS = 0;
pHTInfoEle->PSMPAccessOnly = 0;
pHTInfoEle->SrvIntGranularity = 0;
- pHTInfoEle->OptMode = pHT->CurrentOpMode;
+ pHTInfoEle->OptMode = pHT->CurrentOpMode;
pHTInfoEle->NonGFDevPresent = 0;
pHTInfoEle->DualBeacon = 0;
pHTInfoEle->SecondaryBeacon = 0;
pHTInfoEle->LSigTxopProtectFull = 0;
- pHTInfoEle->PcoActive = 0;
- pHTInfoEle->PcoPhase = 0;
+ pHTInfoEle->PcoActive = 0;
+ pHTInfoEle->PcoPhase = 0;
memset(pHTInfoEle->BasicMSC, 0, 16);
-
*len = 22 + 2; //same above
-
} else {
//STA should not generate High Throughput Information Element
*len = 0;
@@ -758,17 +736,11 @@ void HTConstructRT2RTAggElement(struct ieee80211_device *ieee, u8 *posRT2RTAgg,
posRT2RTAgg->Octet[5] &= 0xfb;
}
*/
-
#else
// Do Nothing
#endif
-
posRT2RTAgg->Length = 6;
#endif
-
-
-
-
}
/*******************************************************************************
@@ -877,8 +849,6 @@ u8 HTGetHighestMCSRate(struct ieee80211_device *ieee, u8 *pMCSRateSet, u8 *pMCSF
return (mcsRate|0x80);
}
-
-
/*
*
*1.Filter our operation rate set with AP's rate set
@@ -891,7 +861,6 @@ u8 HTGetHighestMCSRate(struct ieee80211_device *ieee, u8 *pMCSRateSet, u8 *pMCSF
static u8 HTFilterMCSRate(struct ieee80211_device *ieee, u8 *pSupportMCS,
u8 *pOperateMCS)
{
-
u8 i=0;
// filter out operational rate set not supported by AP, the length of it is 16
@@ -899,7 +868,6 @@ static u8 HTFilterMCSRate(struct ieee80211_device *ieee, u8 *pSupportMCS,
pOperateMCS[i] = ieee->Regdot11HTOperationalRateSet[i]&pSupportMCS[i];
}
-
// TODO: adjust our operational rate set according to our channel bandwidth, STBC and Antenna number
/*
@@ -955,7 +923,6 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
else
pPeerHTInfo = (PHT_INFORMATION_ELE)(pHTInfo->PeerHTInfoBuf);
-
////////////////////////////////////////////////////////
// Configurations:
////////////////////////////////////////////////////////
@@ -988,7 +955,6 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
pHTInfo->bCurSuppCCK = pHTInfo->bRegSuppCCK &&
(pPeerHTCap->DssCCk == 1);
-
//
// Config and configure A-MSDU setting
//
@@ -1001,7 +967,6 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
else
pHTInfo->nCurrent_AMSDU_MaxSize = pHTInfo->nAMSDU_MaxSize;
-
//
// Config A-MPDU setting
//
@@ -1016,7 +981,6 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
pHTInfo->CurrentAMPDUFactor = pPeerHTCap->MaxRxAMPDUFactor;
else
pHTInfo->CurrentAMPDUFactor = pHTInfo->AMPDU_Factor;
-
} else {
// Set MPDU density to 2 to Realtek AP, and set it to 0 for others
// Replace MPDU factor declared in original association response frame format. 2007.08.20 by Emily
@@ -1090,9 +1054,6 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
// Config current operation mode.
//
pHTInfo->CurrentOpMode = pPeerHTInfo->OptMode;
-
-
-
}
void HTSetConnectBwModeCallback(struct ieee80211_device *ieee);
@@ -1142,8 +1103,6 @@ void HTInitializeHTInfo(struct ieee80211_device *ieee)
pHTInfo->CurrentMPDUDensity = pHTInfo->MPDU_Density;
pHTInfo->CurrentAMPDUFactor = pHTInfo->AMPDU_Factor;
-
-
// Initialize all of the parameters related to 11n
memset((void *)(&(pHTInfo->SelfHTCap)), 0, sizeof(pHTInfo->SelfHTCap));
memset((void *)(&(pHTInfo->SelfHTInfo)), 0, sizeof(pHTInfo->SelfHTInfo));
@@ -1181,7 +1140,6 @@ void HTInitializeHTInfo(struct ieee80211_device *ieee)
*/
void HTInitializeBssDesc(PBSS_HT pBssHT)
{
-
pBssHT->bdSupportHT = false;
memset(pBssHT->bdHTCapBuf, 0, sizeof(pBssHT->bdHTCapBuf));
pBssHT->bdHTCapLen = 0;
@@ -1260,7 +1218,6 @@ void HTResetSelfAndSavePeerSetting(struct ieee80211_device *ieee, struct ieee802
if (bIOTAction)
pHTInfo->IOTAction |= HT_IOT_ACT_DISABLE_ALL_2SS;
-
bIOTAction = HTIOTActIsDisableEDCATurbo(ieee, pNetwork->bssid);
if (bIOTAction)
pHTInfo->IOTAction |= HT_IOT_ACT_DISABLE_EDCA_TURBO;
@@ -1272,18 +1229,13 @@ void HTResetSelfAndSavePeerSetting(struct ieee80211_device *ieee, struct ieee802
bIOTAction = HTIOTActIsCCDFsync(pNetwork->bssid);
if (bIOTAction)
pHTInfo->IOTAction |= HT_IOT_ACT_CDD_FSYNC;
-
-
- }
- else
- {
+ } else {
pHTInfo->bCurrentHTSupport = false;
pHTInfo->bCurrentRT2RTAggregation = false;
pHTInfo->bCurrentRT2RTLongSlotTime = false;
pHTInfo->IOTAction = 0;
}
-
}
void HTUpdateSelfAndPeerSetting(struct ieee80211_device *ieee, struct ieee80211_network *pNetwork)
@@ -1337,8 +1289,6 @@ void HTSetConnectBwMode(struct ieee80211_device *ieee, HT_CHANNEL_WIDTH Bandwidt
if (!pHTInfo->bRegBW40MHz)
return;
-
-
// To reduce dummy operation
// if((pHTInfo->bCurBW40MHz==false && Bandwidth==HT_CHANNEL_WIDTH_20) ||
// (pHTInfo->bCurBW40MHz==true && Bandwidth==HT_CHANNEL_WIDTH_20_40 && Offset==pHTInfo->CurSTAExtChnlOffset))
--
2.16.3
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
next prev parent reply other threads:[~2018-05-14 15:53 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-14 15:53 Coding Style of drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c John Whitmore
2018-05-14 15:53 ` [PATCH 01/13] Coding style changes to block comments John Whitmore
2018-05-14 15:58 ` Greg KH
2018-05-14 15:53 ` [PATCH 02/13] coding style chages to the switch statements in the file John Whitmore
2018-05-14 15:59 ` Greg KH
2018-05-14 15:53 ` [PATCH 03/13] coding style corrections for if statements John Whitmore
2018-05-14 15:53 ` John Whitmore [this message]
2018-05-14 15:53 ` [PATCH 05/13] Coding style corrections. Added spaces around operators John Whitmore
2018-05-14 15:53 ` [PATCH 06/13] Coding style, removal of redundant braces John Whitmore
2018-05-14 15:53 ` [PATCH 07/13] Coding style, removal of redundant returns from void functions John Whitmore
2018-05-14 15:53 ` [PATCH 08/13] Coding style, added blank line after declarations John Whitmore
2018-05-14 15:53 ` [PATCH 09/13] Coding style, corrected bad indentation of a statement John Whitmore
2018-05-14 15:53 ` [PATCH 10/13] Coding style: Removal of prohibited spaces John Whitmore
2018-05-14 15:53 ` [PATCH 11/13] Coding style: corrections to for statements John Whitmore
2018-05-14 15:53 ` [PATCH 12/13] Coding style, removal of braces from single statement blocks John Whitmore
2018-05-14 15:53 ` [PATCH 13/13] Coding style, corrected an indentation issue, (use tabs) John Whitmore
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180514155318.32195-5-johnfwhitmore@gmail.com \
--to=johnfwhitmore@gmail.com \
--cc=colin.king@canonical.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=kstewart@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).