From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752663AbeERQu5 (ORCPT ); Fri, 18 May 2018 12:50:57 -0400 Received: from vern.gendns.com ([206.190.152.46]:56939 "EHLO vern.gendns.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752605AbeERQul (ORCPT ); Fri, 18 May 2018 12:50:41 -0400 From: David Lechner To: linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: David Lechner , Michael Turquette , Stephen Boyd , Rob Herring , Mark Rutland , Sekhar Nori , Kevin Hilman , Bartosz Golaszewski , Adam Ford , linux-kernel@vger.kernel.org Subject: [PATCH v11 22/27] ARM: davinci: da8xx: Remove legacy USB and SATA clock init Date: Fri, 18 May 2018 11:48:24 -0500 Message-Id: <20180518164829.27052-23-david@lechnology.com> X-Mailer: git-send-email 2.17.0 In-Reply-To: <20180518164829.27052-1-david@lechnology.com> References: <20180518164829.27052-1-david@lechnology.com> X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - vern.gendns.com X-AntiAbuse: Original Domain - vger.kernel.org X-AntiAbuse: Originator/Caller UID/GID - [47 12] / [47 12] X-AntiAbuse: Sender Address Domain - lechnology.com X-Get-Message-Sender-Via: vern.gendns.com: authenticated_id: davidmain+lechnology.com/only user confirmed/virtual account not confirmed X-Authenticated-Sender: vern.gendns.com: davidmain@lechnology.com X-Source: X-Source-Args: X-Source-Dir: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This removes the unused legacy USB and SATA clock init code from arch/arm/mach-davinci/{devices,usb}-da8xx}.c. Signed-off-by: David Lechner Reviewed-by: Sekhar Nori --- v11 changes: - none v10 changes: - none v9 changes: - none v8 changes: - none v7 changes: - rebased - add davinci prefix to commit message v6 changes: - rebased arch/arm/mach-davinci/devices-da8xx.c | 29 --- arch/arm/mach-davinci/include/mach/da8xx.h | 3 - arch/arm/mach-davinci/usb-da8xx.c | 238 --------------------- 3 files changed, 270 deletions(-) diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 73de449bbc68..1fd3619f6a09 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -30,11 +30,6 @@ #include "cpuidle.h" #include "sram.h" -#ifndef CONFIG_COMMON_CLK -#include -#include "clock.h" -#endif - #define DA8XX_TPCC_BASE 0x01c00000 #define DA8XX_TPTC0_BASE 0x01c08000 #define DA8XX_TPTC1_BASE 0x01c08400 @@ -1045,29 +1040,6 @@ int __init da8xx_register_spi_bus(int instance, unsigned num_chipselect) } #ifdef CONFIG_ARCH_DAVINCI_DA850 -#ifndef CONFIG_COMMON_CLK -static struct clk sata_refclk = { - .name = "sata_refclk", - .set_rate = davinci_simple_set_rate, -}; - -static struct clk_lookup sata_refclk_lookup = - CLK("ahci_da850", "refclk", &sata_refclk); - -int __init da850_register_sata_refclk(int rate) -{ - int ret; - - sata_refclk.rate = rate; - ret = clk_register(&sata_refclk); - if (ret) - return ret; - - clkdev_add(&sata_refclk_lookup); - - return 0; -} -#else int __init da850_register_sata_refclk(int rate) { struct clk *clk; @@ -1078,7 +1050,6 @@ int __init da850_register_sata_refclk(int rate) return clk_register_clkdev(clk, "refclk", "ahci_da850"); } -#endif static struct resource da850_sata_resources[] = { { diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index 5d7b1de9aa7e..ab4a57f433f4 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -103,9 +103,6 @@ int da8xx_register_watchdog(void); int da8xx_register_usb_phy(void); int da8xx_register_usb20(unsigned mA, unsigned potpgt); int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata); -int da8xx_register_usb_refclkin(int rate); -int da8xx_register_usb20_phy_clk(bool use_usb_refclkin); -int da8xx_register_usb11_phy_clk(bool use_usb_refclkin); int da8xx_register_usb_phy_clocks(void); int da850_register_sata_refclk(int rate); int da8xx_register_emac(void); diff --git a/arch/arm/mach-davinci/usb-da8xx.c b/arch/arm/mach-davinci/usb-da8xx.c index c8d2f3075e69..c17ce66a3d95 100644 --- a/arch/arm/mach-davinci/usb-da8xx.c +++ b/arch/arm/mach-davinci/usb-da8xx.c @@ -20,11 +20,6 @@ #include #include -#ifndef CONFIG_COMMON_CLK -#include -#include "clock.h" -#endif - #define DA8XX_USB0_BASE 0x01e00000 #define DA8XX_USB1_BASE 0x01e25000 @@ -87,11 +82,6 @@ static struct platform_device da8xx_usb20_dev = { .name = "musb-da8xx", .id = -1, .dev = { - /* - * Setting init_name so that clock lookup will work in - * usb20_phy_clk_enable() even if this device is not registered. - */ - .init_name = "musb-da8xx", .platform_data = &usb_data, .dma_mask = &usb_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), @@ -140,234 +130,6 @@ int __init da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata) return platform_device_register(&da8xx_usb11_device); } -#ifndef CONFIG_COMMON_CLK -static struct clk usb_refclkin = { - .name = "usb_refclkin", - .set_rate = davinci_simple_set_rate, -}; - -static struct clk_lookup usb_refclkin_lookup = - CLK(NULL, "usb_refclkin", &usb_refclkin); - -/** - * da8xx_register_usb_refclkin - register USB_REFCLKIN clock - * - * @rate: The clock rate in Hz - * - * This clock is only needed if the board provides an external USB_REFCLKIN - * signal, in which case it will be used as the parent of usb20_phy_clk and/or - * usb11_phy_clk. - */ -int __init da8xx_register_usb_refclkin(int rate) -{ - int ret; - - usb_refclkin.rate = rate; - ret = clk_register(&usb_refclkin); - if (ret) - return ret; - - clkdev_add(&usb_refclkin_lookup); - - return 0; -} - -static void usb20_phy_clk_enable(struct clk *clk) -{ - u32 val; - u32 timeout = 500000; /* 500 msec */ - - val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); - - /* The USB 2.O PLL requires that the USB 2.O PSC is enabled as well. */ - davinci_clk_enable(usb20_clk); - - /* - * Turn on the USB 2.0 PHY, but just the PLL, and not OTG. The USB 1.1 - * host may use the PLL clock without USB 2.0 OTG being used. - */ - val &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN); - val |= CFGCHIP2_PHY_PLLON; - - writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); - - while (--timeout) { - val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); - if (val & CFGCHIP2_PHYCLKGD) - goto done; - udelay(1); - } - - pr_err("Timeout waiting for USB 2.0 PHY clock good\n"); -done: - davinci_clk_disable(usb20_clk); -} - -static void usb20_phy_clk_disable(struct clk *clk) -{ - u32 val; - - val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); - val |= CFGCHIP2_PHYPWRDN; - writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); -} - -static int usb20_phy_clk_set_parent(struct clk *clk, struct clk *parent) -{ - u32 val; - - val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); - - /* Set the mux depending on the parent clock. */ - if (parent == &usb_refclkin) { - val &= ~CFGCHIP2_USB2PHYCLKMUX; - } else if (strcmp(parent->name, "pll0_aux_clk") == 0) { - val |= CFGCHIP2_USB2PHYCLKMUX; - } else { - pr_err("Bad parent on USB 2.0 PHY clock\n"); - return -EINVAL; - } - - /* reference frequency also comes from parent clock */ - val &= ~CFGCHIP2_REFFREQ_MASK; - switch (clk_get_rate(parent)) { - case 12000000: - val |= CFGCHIP2_REFFREQ_12MHZ; - break; - case 13000000: - val |= CFGCHIP2_REFFREQ_13MHZ; - break; - case 19200000: - val |= CFGCHIP2_REFFREQ_19_2MHZ; - break; - case 20000000: - val |= CFGCHIP2_REFFREQ_20MHZ; - break; - case 24000000: - val |= CFGCHIP2_REFFREQ_24MHZ; - break; - case 26000000: - val |= CFGCHIP2_REFFREQ_26MHZ; - break; - case 38400000: - val |= CFGCHIP2_REFFREQ_38_4MHZ; - break; - case 40000000: - val |= CFGCHIP2_REFFREQ_40MHZ; - break; - case 48000000: - val |= CFGCHIP2_REFFREQ_48MHZ; - break; - default: - pr_err("Bad parent clock rate on USB 2.0 PHY clock\n"); - return -EINVAL; - } - - writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); - - return 0; -} - -static struct clk usb20_phy_clk = { - .name = "usb0_clk48", - .clk_enable = usb20_phy_clk_enable, - .clk_disable = usb20_phy_clk_disable, - .set_parent = usb20_phy_clk_set_parent, -}; - -static struct clk_lookup usb20_phy_clk_lookup = - CLK("da8xx-usb-phy", "usb0_clk48", &usb20_phy_clk); - -/** - * da8xx_register_usb20_phy_clk - register USB0PHYCLKMUX clock - * - * @use_usb_refclkin: Selects the parent clock - either "usb_refclkin" if true - * or "pll0_aux" if false. - */ -int __init da8xx_register_usb20_phy_clk(bool use_usb_refclkin) -{ - struct clk *parent; - int ret; - - usb20_clk = clk_get(&da8xx_usb20_dev.dev, "usb20"); - ret = PTR_ERR_OR_ZERO(usb20_clk); - if (ret) - return ret; - - parent = clk_get(NULL, use_usb_refclkin ? "usb_refclkin" : "pll0_aux"); - ret = PTR_ERR_OR_ZERO(parent); - if (ret) { - clk_put(usb20_clk); - return ret; - } - - usb20_phy_clk.parent = parent; - ret = clk_register(&usb20_phy_clk); - if (!ret) - clkdev_add(&usb20_phy_clk_lookup); - - clk_put(parent); - - return ret; -} - -static int usb11_phy_clk_set_parent(struct clk *clk, struct clk *parent) -{ - u32 val; - - val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); - - /* Set the USB 1.1 PHY clock mux based on the parent clock. */ - if (parent == &usb20_phy_clk) { - val &= ~CFGCHIP2_USB1PHYCLKMUX; - } else if (parent == &usb_refclkin) { - val |= CFGCHIP2_USB1PHYCLKMUX; - } else { - pr_err("Bad parent on USB 1.1 PHY clock\n"); - return -EINVAL; - } - - writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); - - return 0; -} - -static struct clk usb11_phy_clk = { - .name = "usb1_clk48", - .set_parent = usb11_phy_clk_set_parent, -}; - -static struct clk_lookup usb11_phy_clk_lookup = - CLK("da8xx-usb-phy", "usb1_clk48", &usb11_phy_clk); - -/** - * da8xx_register_usb11_phy_clk - register USB1PHYCLKMUX clock - * - * @use_usb_refclkin: Selects the parent clock - either "usb_refclkin" if true - * or "usb0_clk48" if false. - */ -int __init da8xx_register_usb11_phy_clk(bool use_usb_refclkin) -{ - struct clk *parent; - int ret = 0; - - if (use_usb_refclkin) - parent = clk_get(NULL, "usb_refclkin"); - else - parent = clk_get(&da8xx_usb_phy.dev, "usb0_clk48"); - if (IS_ERR(parent)) - return PTR_ERR(parent); - - usb11_phy_clk.parent = parent; - ret = clk_register(&usb11_phy_clk); - if (!ret) - clkdev_add(&usb11_phy_clk_lookup); - - clk_put(parent); - - return ret; -} -#endif static struct platform_device da8xx_usb_phy_clks_device = { .name = "da830-usb-phy-clks", .id = -1, -- 2.17.0