LKML Archive on lore.kernel.org
 help / Atom feed
From: Sibi Sankar <sibis@codeaurora.org>
To: bjorn.andersson@linaro.org, p.zabel@pengutronix.de, robh+dt@kernel.org
Cc: linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, sibis@codeaurora.org,
	georgi.djakov@linaro.org, jassisinghbrar@gmail.com,
	ohad@wizery.com, mark.rutland@arm.com, kyan@codeaurora.org,
	sricharan@codeaurora.org, akdwived@codeaurora.org,
	linux-arm-msm@vger.kernel.org, tsoni@codeaurora.org
Subject: [PATCH v5 2/8] reset: qcom: AOSS (always on subsystem) reset controller
Date: Mon, 21 May 2018 22:57:08 +0530
Message-ID: <20180521172714.8551-3-sibis@codeaurora.org> (raw)
In-Reply-To: <20180521172714.8551-1-sibis@codeaurora.org>

Add reset controller driver for Qualcomm SDM845 SoC to
control reset signals provided by AOSS for Modem, Venus
ADSP, GPU, Camera, Wireless, Display subsystem

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
---
 drivers/reset/Kconfig           |   9 +++
 drivers/reset/Makefile          |   1 +
 drivers/reset/reset-qcom-aoss.c | 133 ++++++++++++++++++++++++++++++++
 3 files changed, 143 insertions(+)
 create mode 100644 drivers/reset/reset-qcom-aoss.c

diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index c0b292be1b72..756ad2b27d0f 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -82,6 +82,15 @@ config RESET_PISTACHIO
 	help
 	  This enables the reset driver for ImgTec Pistachio SoCs.
 
+config RESET_QCOM_AOSS
+	bool "Qcom AOSS Reset Driver"
+	depends on ARCH_QCOM || COMPILE_TEST
+	help
+	  This enables the AOSS (always on subsystem) reset driver
+	  for Qualcomm SDM845 SoCs. Say Y if you want to control
+	  reset signals provided by AOSS for Modem, Venus, ADSP,
+	  GPU, Camera, Wireless, Display subsystem. Otherwise, say N.
+
 config RESET_SIMPLE
 	bool "Simple Reset Controller Driver" if COMPILE_TEST
 	default ARCH_SOCFPGA || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index c1261dcfe9ad..6881e4d287f0 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
 obj-$(CONFIG_RESET_MESON) += reset-meson.o
 obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
 obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
+obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o
 obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
 obj-$(CONFIG_RESET_STM32MP157) += reset-stm32mp1.o
 obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
diff --git a/drivers/reset/reset-qcom-aoss.c b/drivers/reset/reset-qcom-aoss.c
new file mode 100644
index 000000000000..d9ca7339c434
--- /dev/null
+++ b/drivers/reset/reset-qcom-aoss.c
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/of_device.h>
+#include <dt-bindings/reset/qcom,sdm845-aoss.h>
+
+struct qcom_aoss_reset_map {
+	unsigned int reg;
+};
+
+struct qcom_aoss_desc {
+	const struct qcom_aoss_reset_map *resets;
+	size_t num_resets;
+};
+
+struct qcom_aoss_reset_data {
+	struct reset_controller_dev rcdev;
+	void __iomem *base;
+	const struct qcom_aoss_desc *desc;
+};
+
+static const struct qcom_aoss_reset_map sdm845_aoss_resets[] = {
+	[AOSS_CC_MSS_RESTART] = {0x0},
+	[AOSS_CC_CAMSS_RESTART] = {0x1000},
+	[AOSS_CC_VENUS_RESTART] = {0x2000},
+	[AOSS_CC_GPU_RESTART] = {0x3000},
+	[AOSS_CC_DISPSS_RESTART] = {0x4000},
+	[AOSS_CC_WCSS_RESTART] = {0x10000},
+	[AOSS_CC_LPASS_RESTART] = {0x20000},
+};
+
+static const struct qcom_aoss_desc sdm845_aoss_desc = {
+	.resets = sdm845_aoss_resets,
+	.num_resets = ARRAY_SIZE(sdm845_aoss_resets),
+};
+
+static inline struct qcom_aoss_reset_data *to_qcom_aoss_reset_data(
+				struct reset_controller_dev *rcdev)
+{
+	return container_of(rcdev, struct qcom_aoss_reset_data, rcdev);
+}
+
+static int qcom_aoss_control_assert(struct reset_controller_dev *rcdev,
+				    unsigned long idx)
+{
+	struct qcom_aoss_reset_data *data = to_qcom_aoss_reset_data(rcdev);
+	const struct qcom_aoss_reset_map *map = &data->desc->resets[idx];
+
+	writel(1, data->base + map->reg);
+	/* Wait 6 32kHz sleep cycles for reset */
+	usleep_range(200, 300);
+	return 0;
+}
+
+static int qcom_aoss_control_deassert(struct reset_controller_dev *rcdev,
+				      unsigned long idx)
+{
+	struct qcom_aoss_reset_data *data = to_qcom_aoss_reset_data(rcdev);
+	const struct qcom_aoss_reset_map *map = &data->desc->resets[idx];
+
+	writel(0, data->base + map->reg);
+	/* Wait 6 32kHz sleep cycles for reset */
+	usleep_range(200, 300);
+	return 0;
+}
+
+static int qcom_aoss_control_reset(struct reset_controller_dev *rcdev,
+					unsigned long idx)
+{
+	qcom_aoss_control_assert(rcdev, idx);
+
+	return qcom_aoss_control_deassert(rcdev, idx);
+}
+
+static const struct reset_control_ops qcom_aoss_reset_ops = {
+	.reset = qcom_aoss_control_reset,
+	.assert = qcom_aoss_control_assert,
+	.deassert = qcom_aoss_control_deassert,
+};
+
+static int qcom_aoss_reset_probe(struct platform_device *pdev)
+{
+	struct qcom_aoss_reset_data *data;
+	struct device *dev = &pdev->dev;
+	const struct qcom_aoss_desc *desc;
+	struct resource *res;
+
+	desc = of_device_get_match_data(dev);
+	if (!desc)
+		return -EINVAL;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->desc = desc;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	data->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(data->base))
+		return PTR_ERR(data->base);
+
+	data->rcdev.owner = THIS_MODULE;
+	data->rcdev.ops = &qcom_aoss_reset_ops;
+	data->rcdev.nr_resets = desc->num_resets;
+	data->rcdev.of_node = dev->of_node;
+
+	return devm_reset_controller_register(dev, &data->rcdev);
+}
+
+static const struct of_device_id qcom_aoss_reset_of_match[] = {
+	{ .compatible = "qcom,sdm845-aoss-reset", .data = &sdm845_aoss_desc },
+	{}
+};
+
+static struct platform_driver qcom_aoss_reset_driver = {
+	.probe = qcom_aoss_reset_probe,
+	.driver  = {
+		.name = "qcom_aoss_reset",
+		.of_match_table = qcom_aoss_reset_of_match,
+	},
+};
+
+builtin_platform_driver(qcom_aoss_reset_driver);
+
+MODULE_DESCRIPTION("Qualcomm AOSS Reset Driver");
+MODULE_LICENSE("GPL v2");
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

  parent reply index

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-21 17:27 [PATCH v5 0/8] Add support for remoteproc modem-pil on SDM845 SoCs Sibi Sankar
2018-05-21 17:27 ` [PATCH v5 1/8] dt-bindings: reset: Add AOSS reset bindings for " Sibi Sankar
2018-05-22 16:17   ` Rob Herring
2018-06-23  0:44   ` Bjorn Andersson
2018-06-27 14:24     ` Sibi S
2018-05-21 17:27 ` Sibi Sankar [this message]
2018-06-23  0:46   ` [PATCH v5 2/8] reset: qcom: AOSS (always on subsystem) reset controller Bjorn Andersson
2018-05-21 17:27 ` [PATCH v5 3/8] remoteproc: Move proxy unvote to handover irq handler Sibi Sankar
2018-05-22  4:35   ` Bjorn Andersson
2018-05-22  6:31     ` Sibi S
2018-05-21 17:27 ` [PATCH v5 4/8] remoteproc: Synchronize proxy unvote from multiple contexts Sibi Sankar
2018-05-21 17:27 ` [PATCH v5 5/8] dt-bindings: remoteproc: Add Q6v5 Modem PIL binding for SDM845 Sibi Sankar
2018-05-22 15:56   ` Rob Herring
2018-05-29 14:37     ` Sibi S
2018-05-29 15:45       ` Rob Herring
2018-05-21 17:27 ` [PATCH v5 6/8] remoteproc: qcom: Introduce reset assert/deassert helper functions Sibi Sankar
2018-05-21 17:27 ` [PATCH v5 7/8] remoteproc: qcom: Add support for mss remoteproc on SDM845 Sibi Sankar
2018-05-21 17:27 ` [PATCH v5 8/8] remoteproc: qcom: Allow defining GLINK edge for mss remoteproc Sibi Sankar

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180521172714.8551-3-sibis@codeaurora.org \
    --to=sibis@codeaurora.org \
    --cc=akdwived@codeaurora.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=georgi.djakov@linaro.org \
    --cc=jassisinghbrar@gmail.com \
    --cc=kyan@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=ohad@wizery.com \
    --cc=p.zabel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    --cc=sricharan@codeaurora.org \
    --cc=tsoni@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org linux-kernel@archiver.kernel.org
	public-inbox-index lkml


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox