linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Thomas Gleixner <tglx@linutronix.de>,
	Jason Cooper <jason@lakedaemon.net>,
	Marc Zyngier <marc.zyngier@arm.com>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will.deacon@arm.com>, Andrew Lunn <andrew@lunn.ch>,
	Gregory Clement <gregory.clement@bootlin.com>,
	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Antoine Tenart <antoine.tenart@bootlin.com>,
	Maxime Chevallier <maxime.chevallier@bootlin.com>,
	Nadav Haklai <nadavh@marvell.com>, Haim Boot <hayim@marvell.com>,
	Hanna Hawa <hannah@marvell.com>,
	linux-kernel@vger.kernel.org,
	Miquel Raynal <miquel.raynal@bootlin.com>
Subject: [PATCH v2 09/16] irqchip/irq-mvebu-sei: add new driver for Marvell SEI
Date: Tue, 22 May 2018 11:40:35 +0200	[thread overview]
Message-ID: <20180522094042.24770-10-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20180522094042.24770-1-miquel.raynal@bootlin.com>

This is a cascaded interrupt controller in the AP806 GIC that collapses
SEIs (System Error Interrupt) coming from the AP and the CPs (through
the ICU).

The SEI handles up to 64 interrupts. The first 21 interrupts are wired
and come from the AP. The next 43 interrupts are from the CPs and are
triggered through MSI messages. To handle this complexity, the driver
has to declare to the upper layer: one IRQ domain for the wired
interrupts, one IRQ domain for the MSIs; and acts as a MSI server
('parent') by declaring an MSI domain.

Suggested-by: Haim Boot <hayim@marvell.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/irqchip/Kconfig         |   3 +
 drivers/irqchip/Makefile        |   1 +
 drivers/irqchip/irq-mvebu-sei.c | 422 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 426 insertions(+)
 create mode 100644 drivers/irqchip/irq-mvebu-sei.c

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index e9233db16e03..922e2a919cf3 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -310,6 +310,9 @@ config MVEBU_ODMI
 config MVEBU_PIC
 	bool
 
+config MVEBU_SEI
+        bool
+
 config LS_SCFG_MSI
 	def_bool y if SOC_LS1021A || ARCH_LAYERSCAPE
 	depends on PCI && PCI_MSI
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 15f268f646bf..69d2ccb454ef 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -76,6 +76,7 @@ obj-$(CONFIG_MVEBU_GICP)		+= irq-mvebu-gicp.o
 obj-$(CONFIG_MVEBU_ICU)			+= irq-mvebu-icu.o
 obj-$(CONFIG_MVEBU_ODMI)		+= irq-mvebu-odmi.o
 obj-$(CONFIG_MVEBU_PIC)			+= irq-mvebu-pic.o
+obj-$(CONFIG_MVEBU_SEI)			+= irq-mvebu-sei.o
 obj-$(CONFIG_LS_SCFG_MSI)		+= irq-ls-scfg-msi.o
 obj-$(CONFIG_EZNPS_GIC)			+= irq-eznps.o
 obj-$(CONFIG_ARCH_ASPEED)		+= irq-aspeed-vic.o irq-aspeed-i2c-ic.o
diff --git a/drivers/irqchip/irq-mvebu-sei.c b/drivers/irqchip/irq-mvebu-sei.c
new file mode 100644
index 000000000000..d9abd5e10741
--- /dev/null
+++ b/drivers/irqchip/irq-mvebu-sei.c
@@ -0,0 +1,422 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#define pr_fmt(fmt) "mvebu-sei: " fmt
+
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/msi.h>
+#include <linux/platform_device.h>
+#include <linux/irqchip.h>
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/* Cause register */
+#define GICP_SECR(idx)		(0x0  + (idx * 0x4))
+/* Mask register */
+#define GICP_SEMR(idx)		(0x20 + (idx * 0x4))
+#define GICP_SET_SEI_OFFSET	0x30
+
+#define SEI_IRQ_COUNT_PER_REG	32
+#define SEI_IRQ_REG_COUNT	2
+#define SEI_IRQ_COUNT		(SEI_IRQ_COUNT_PER_REG * SEI_IRQ_REG_COUNT)
+#define SEI_IRQ_REG_IDX(irq_id)	(irq_id / SEI_IRQ_COUNT_PER_REG)
+#define SEI_IRQ_REG_BIT(irq_id)	(irq_id % SEI_IRQ_COUNT_PER_REG)
+
+struct mvebu_sei_interrupt_range {
+	u32 first;
+	u32 number;
+};
+
+struct mvebu_sei {
+	struct device *dev;
+	void __iomem *base;
+	struct resource *res;
+	struct irq_domain *ap_domain;
+	struct irq_domain *cp_domain;
+	struct mvebu_sei_interrupt_range ap_interrupts;
+	struct mvebu_sei_interrupt_range cp_interrupts;
+	/* Lock on MSI allocations/releases */
+	spinlock_t cp_msi_lock;
+	DECLARE_BITMAP(cp_msi_bitmap, SEI_IRQ_COUNT);
+};
+
+static int mvebu_sei_domain_to_sei_irq(struct mvebu_sei *sei,
+				       struct irq_domain *domain,
+				       irq_hw_number_t hwirq)
+{
+	if (domain == sei->ap_domain)
+		return sei->ap_interrupts.first + hwirq;
+	else
+		return sei->cp_interrupts.first + hwirq;
+}
+
+static void mvebu_sei_reset(struct mvebu_sei *sei)
+{
+	u32 reg_idx;
+
+	/* Clear IRQ cause registers */
+	for (reg_idx = 0; reg_idx < SEI_IRQ_REG_COUNT; reg_idx++)
+		writel(0xFFFFFFFF, sei->base + GICP_SECR(reg_idx));
+}
+
+static void mvebu_sei_mask_irq(struct irq_data *d)
+{
+	struct mvebu_sei *sei = irq_data_get_irq_chip_data(d);
+	u32 sei_irq = mvebu_sei_domain_to_sei_irq(sei, d->domain, d->hwirq);
+	u32 reg_idx = SEI_IRQ_REG_IDX(sei_irq);
+	u32 reg;
+
+	/* 1 disables the interrupt */
+	reg = readl(sei->base + GICP_SEMR(reg_idx));
+	reg |= BIT(SEI_IRQ_REG_BIT(sei_irq));
+	writel(reg, sei->base + GICP_SEMR(reg_idx));
+}
+
+static void mvebu_sei_unmask_irq(struct irq_data *d)
+{
+	struct mvebu_sei *sei = irq_data_get_irq_chip_data(d);
+	u32 sei_irq = mvebu_sei_domain_to_sei_irq(sei, d->domain, d->hwirq);
+	u32 reg_idx = SEI_IRQ_REG_IDX(sei_irq);
+	u32 reg;
+
+	/* 0 enables the interrupt */
+	reg = readl(sei->base + GICP_SEMR(reg_idx));
+	reg &= ~BIT(SEI_IRQ_REG_BIT(sei_irq));
+	writel(reg, sei->base + GICP_SEMR(reg_idx));
+}
+
+static void mvebu_sei_compose_msi_msg(struct irq_data *data,
+				      struct msi_msg *msg)
+{
+	struct mvebu_sei *sei = data->chip_data;
+	phys_addr_t set = sei->res->start + GICP_SET_SEI_OFFSET;
+
+	msg->data = mvebu_sei_domain_to_sei_irq(sei, data->domain, data->hwirq);
+	msg->address_lo = lower_32_bits(set);
+	msg->address_hi = upper_32_bits(set);
+}
+
+static struct irq_chip mvebu_sei_ap_wired_irq_chip = {
+	.name			= "AP wired SEI",
+	.irq_mask		= mvebu_sei_mask_irq,
+	.irq_unmask		= mvebu_sei_unmask_irq,
+	.irq_eoi		= irq_chip_eoi_parent,
+	.irq_set_affinity	= irq_chip_set_affinity_parent,
+	.irq_set_type		= irq_chip_set_type_parent,
+};
+
+static struct irq_chip mvebu_sei_cp_msi_irq_chip = {
+	.name			= "CP MSI SEI",
+	.irq_mask		= mvebu_sei_mask_irq,
+	.irq_unmask		= mvebu_sei_unmask_irq,
+	.irq_eoi		= irq_chip_eoi_parent,
+	.irq_set_affinity	= irq_chip_set_affinity_parent,
+	.irq_set_type		= irq_chip_set_type_parent,
+	.irq_compose_msi_msg	= mvebu_sei_compose_msi_msg,
+};
+
+static int mvebu_sei_irq_domain_alloc(struct irq_domain *domain,
+				      unsigned int virq, unsigned int nr_irqs,
+				      void *args)
+{
+	struct mvebu_sei *sei = domain->host_data;
+	struct irq_fwspec *fwspec = args;
+	struct irq_chip *irq_chip;
+	int sei_hwirq, hwirq;
+	int ret;
+
+	/* Software only supports single allocations for now */
+	if (nr_irqs != 1)
+		return -ENOTSUPP;
+
+	if (domain == sei->ap_domain) {
+		irq_chip = &mvebu_sei_ap_wired_irq_chip;
+		hwirq = fwspec->param[0];
+	} else {
+		irq_chip = &mvebu_sei_cp_msi_irq_chip;
+		spin_lock(&sei->cp_msi_lock);
+		hwirq = bitmap_find_free_region(sei->cp_msi_bitmap,
+						SEI_IRQ_COUNT, 0);
+		spin_unlock(&sei->cp_msi_lock);
+		if (hwirq < 0)
+			return -ENOSPC;
+	}
+
+	sei_hwirq = mvebu_sei_domain_to_sei_irq(sei, domain, hwirq);
+
+	fwspec->fwnode = domain->parent->fwnode;
+	fwspec->param_count = 3;
+	fwspec->param[0] = GIC_SPI;
+	fwspec->param[1] = sei_hwirq;
+	fwspec->param[2] = IRQ_TYPE_EDGE_RISING;
+
+	ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, fwspec);
+	if (ret)
+		goto release_region;
+
+	ret = irq_domain_set_hwirq_and_chip(domain, virq, hwirq, irq_chip, sei);
+	if (ret)
+		goto free_irq_parents;
+
+	return 0;
+
+free_irq_parents:
+	irq_domain_free_irqs_parent(domain, virq, nr_irqs);
+release_region:
+	if (domain == sei->cp_domain) {
+		spin_lock(&sei->cp_msi_lock);
+		bitmap_release_region(sei->cp_msi_bitmap, hwirq, 0);
+		spin_unlock(&sei->cp_msi_lock);
+	}
+
+	return ret;
+}
+
+static void mvebu_sei_irq_domain_free(struct irq_domain *domain,
+				      unsigned int virq, unsigned int nr_irqs)
+{
+	struct mvebu_sei *sei = domain->host_data;
+	struct irq_data *d = irq_domain_get_irq_data(domain, virq);
+	u32 irq_nb = sei->ap_interrupts.number + sei->cp_interrupts.number;
+
+	if (nr_irqs != 1 || d->hwirq >= irq_nb) {
+		dev_err(sei->dev, "Invalid hwirq %lu\n", d->hwirq);
+		return;
+	}
+
+	irq_domain_free_irqs_parent(domain, virq, nr_irqs);
+
+	spin_lock(&sei->cp_msi_lock);
+	bitmap_release_region(sei->cp_msi_bitmap, d->hwirq, 0);
+	spin_unlock(&sei->cp_msi_lock);
+}
+
+static const struct irq_domain_ops mvebu_sei_ap_domain_ops = {
+	.xlate = irq_domain_xlate_onecell,
+	.alloc = mvebu_sei_irq_domain_alloc,
+	.free = mvebu_sei_irq_domain_free,
+};
+
+static const struct irq_domain_ops mvebu_sei_cp_domain_ops = {
+	.alloc = mvebu_sei_irq_domain_alloc,
+	.free = mvebu_sei_irq_domain_free,
+};
+
+static struct irq_chip mvebu_sei_msi_irq_chip = {
+	.name		= "SEI",
+	.irq_set_type	= irq_chip_set_type_parent,
+};
+
+static struct msi_domain_ops mvebu_sei_msi_ops = {
+};
+
+static struct msi_domain_info mvebu_sei_msi_domain_info = {
+	.flags	= MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS,
+	.ops	= &mvebu_sei_msi_ops,
+	.chip	= &mvebu_sei_msi_irq_chip,
+};
+
+static void mvebu_sei_handle_cascade_irq(struct irq_desc *desc)
+{
+	struct mvebu_sei *sei = irq_desc_get_handler_data(desc);
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	unsigned long irqmap, irq_bit;
+	u32 reg_idx, virq, irqn;
+
+	chained_irq_enter(chip, desc);
+
+	/* Read both SEI cause registers (64 bits) */
+	for (reg_idx = 0; reg_idx < SEI_IRQ_REG_COUNT; reg_idx++) {
+		irqmap = readl_relaxed(sei->base + GICP_SECR(reg_idx));
+
+		/* Call handler for each set bit */
+		for_each_set_bit(irq_bit, &irqmap, SEI_IRQ_COUNT_PER_REG) {
+			/* Cause Register gives the SEI number */
+			irqn = irq_bit + reg_idx * SEI_IRQ_COUNT_PER_REG;
+			/*
+			 * Finding Linux mapping (virq) needs the right domain
+			 * and the relative hwirq (which start at 0 in both
+			 * cases, while irqn is relative to all SEI interrupts).
+			 */
+			if (irqn < sei->ap_interrupts.number) {
+				virq = irq_find_mapping(sei->ap_domain, irqn);
+			} else {
+				irqn -= sei->ap_interrupts.number;
+				virq = irq_find_mapping(sei->cp_domain, irqn);
+			}
+
+			/* Call IRQ handler */
+			generic_handle_irq(virq);
+		}
+
+		/* Clear interrupt indication by writing 1 to it */
+		writel(irqmap, sei->base + GICP_SECR(reg_idx));
+	}
+
+	chained_irq_exit(chip, desc);
+}
+
+static int mvebu_sei_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node, *parent, *child;
+	struct irq_domain *parent_domain, *plat_domain;
+	struct mvebu_sei *sei;
+	const __be32 *property;
+	u32 parent_irq, size;
+	int ret;
+
+	sei = devm_kzalloc(&pdev->dev, sizeof(*sei), GFP_KERNEL);
+	if (!sei)
+		return -ENOMEM;
+
+	sei->dev = &pdev->dev;
+
+	spin_lock_init(&sei->cp_msi_lock);
+
+	sei->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	sei->base = devm_ioremap_resource(sei->dev, sei->res);
+	if (!sei->base) {
+		dev_err(sei->dev, "Failed to remap SEI resource\n");
+		return -ENODEV;
+	}
+
+	mvebu_sei_reset(sei);
+
+	/*
+	 * Reserve the single (top-level) parent SPI IRQ from which all the
+	 * interrupts handled by this driver will be signaled.
+	 */
+	parent_irq = irq_of_parse_and_map(node, 0);
+	if (parent_irq <= 0) {
+		dev_err(sei->dev, "Failed to retrieve top-level SPI IRQ\n");
+		return -ENODEV;
+	}
+
+	irq_set_chained_handler(parent_irq, mvebu_sei_handle_cascade_irq);
+	irq_set_handler_data(parent_irq, sei);
+
+	/*
+	 * SEIs in the range [ 0; 20] are wired and come from the AP.
+	 * SEIs in the range [21; 63] are CP SEI and are triggered through MSIs.
+	 *
+	 * Each SEI 'domain' is represented as a subnode.
+	 */
+
+	/* Get a reference to the parent domain to create a hierarchy */
+	parent = of_irq_find_parent(node);
+	if (!parent) {
+		dev_err(sei->dev, "Failed to find parent IRQ node\n");
+		ret = -ENODEV;
+		goto dispose_irq;
+	}
+
+	parent_domain = irq_find_host(parent);
+	if (!parent_domain) {
+		dev_err(sei->dev, "Failed to find parent IRQ domain\n");
+		ret = -ENODEV;
+		goto dispose_irq;
+	}
+
+	/* Create the 'wired' hierarchy */
+	child = of_find_node_by_name(node, "sei-wired-controller");
+	if (!child) {
+		dev_err(sei->dev, "Missing 'sei-wired-controller' subnode\n");
+		ret = -ENODEV;
+		goto dispose_irq;
+	}
+
+	property = of_get_property(child, "marvell,sei-ranges", &size);
+	if (!property || size != (2 * sizeof(u32))) {
+		dev_err(sei->dev, "Missing 'marvell,sei-ranges' property\n");
+		of_node_put(child);
+		ret = -ENODEV;
+		goto dispose_irq;
+	}
+
+	sei->ap_interrupts.first = be32_to_cpu(property[0]);
+	sei->ap_interrupts.number = be32_to_cpu(property[1]);
+	sei->ap_domain = irq_domain_create_hierarchy(parent_domain, 0,
+						     sei->ap_interrupts.number,
+						     of_node_to_fwnode(child),
+						     &mvebu_sei_ap_domain_ops,
+						     sei);
+	of_node_put(child);
+	if (!sei->ap_domain) {
+		dev_err(sei->dev, "Failed to create AP IRQ domain\n");
+		ret = -ENOMEM;
+		goto dispose_irq;
+	}
+
+	/* Create the 'MSI' hierarchy */
+	child = of_find_node_by_name(node, "sei-msi-controller");
+	if (!child) {
+		dev_err(sei->dev, "Missing 'sei-msi-controller' subnode\n");
+		ret = -ENODEV;
+		goto remove_ap_domain;
+	}
+
+	property = of_get_property(child, "marvell,sei-ranges", &size);
+	if (!property || size != (2 * sizeof(u32))) {
+		dev_err(sei->dev, "Missing 'marvell,sei-ranges' property\n");
+		of_node_put(child);
+		ret = -ENODEV;
+		goto remove_ap_domain;
+	}
+
+	sei->cp_interrupts.first = be32_to_cpu(property[0]);
+	sei->cp_interrupts.number = be32_to_cpu(property[1]);
+	sei->cp_domain = irq_domain_create_hierarchy(parent_domain, 0,
+						     sei->cp_interrupts.number,
+						     of_node_to_fwnode(child),
+						     &mvebu_sei_cp_domain_ops,
+						     sei);
+	if (!sei->cp_domain) {
+		pr_err("Failed to create CPs IRQ domain\n");
+		of_node_put(child);
+		ret = -ENOMEM;
+		goto remove_ap_domain;
+	}
+
+	plat_domain = platform_msi_create_irq_domain(of_node_to_fwnode(child),
+						     &mvebu_sei_msi_domain_info,
+						     sei->cp_domain);
+	of_node_put(child);
+	if (!plat_domain) {
+		pr_err("Failed to create CPs MSI domain\n");
+		ret = -ENOMEM;
+		goto remove_cp_domain;
+	}
+
+	platform_set_drvdata(pdev, sei);
+
+	return 0;
+
+remove_cp_domain:
+	irq_domain_remove(sei->cp_domain);
+remove_ap_domain:
+	irq_domain_remove(sei->ap_domain);
+dispose_irq:
+	irq_dispose_mapping(parent_irq);
+
+	return ret;
+}
+
+static const struct of_device_id mvebu_sei_of_match[] = {
+	{ .compatible = "marvell,armada-8k-sei", },
+	{},
+};
+
+static struct platform_driver mvebu_sei_driver = {
+	.probe  = mvebu_sei_probe,
+	.driver = {
+		.name = "mvebu-sei",
+		.of_match_table = mvebu_sei_of_match,
+	},
+};
+builtin_platform_driver(mvebu_sei_driver);
-- 
2.14.1

  parent reply	other threads:[~2018-05-22  9:41 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-22  9:40 [PATCH v2 00/16] Add System Error Interrupt support to Armada SoCs Miquel Raynal
2018-05-22  9:40 ` [PATCH v2 01/16] dt-bindings/interrupt-controller: fix Marvell ICU length in the example Miquel Raynal
2018-05-22  9:40 ` [PATCH v2 02/16] arm64: dts: marvell: fix CP110 ICU node size Miquel Raynal
2018-05-23  7:36   ` Gregory CLEMENT
2018-05-22  9:40 ` [PATCH v2 03/16] irqchip/irq-mvebu-icu: fix wrong private data retrieval Miquel Raynal
2018-05-22  9:40 ` [PATCH v2 04/16] irqchip/irq-mvebu-icu: clarify the reset operation of configured interrupts Miquel Raynal
2018-05-22  9:40 ` [PATCH v2 05/16] irqchip/irq-mvebu-icu: switch to regmap Miquel Raynal
2018-05-22  9:40 ` [PATCH v2 06/16] irqchip/irq-mvebu-icu: make irq_domain local Miquel Raynal
2018-05-22  9:40 ` [PATCH v2 07/16] irqchip/irq-mvebu-icu: disociate ICU and NSR Miquel Raynal
2018-05-22  9:40 ` [PATCH v2 08/16] irqchip/irq-mvebu-icu: support ICU subnodes Miquel Raynal
2018-05-22  9:40 ` Miquel Raynal [this message]
2018-05-23 14:05   ` [PATCH v2 09/16] irqchip/irq-mvebu-sei: add new driver for Marvell SEI Marc Zyngier
2018-06-08 10:26     ` Miquel Raynal
2018-05-22  9:40 ` [PATCH v2 10/16] arm64: marvell: enable SEI driver Miquel Raynal
2018-05-22  9:40 ` [PATCH v2 11/16] irqchip/irq-mvebu-icu: add support for System Error Interrupts (SEI) Miquel Raynal
2018-05-23 14:23   ` Marc Zyngier
2018-06-08 13:08     ` Miquel Raynal
2018-05-22  9:40 ` [PATCH v2 12/16] dt-bindings/interrupt-controller: update Marvell ICU bindings Miquel Raynal
2018-06-05 20:29   ` Rob Herring
2018-06-05 20:35     ` Thomas Petazzoni
2018-06-08 14:00     ` Miquel Raynal
2018-05-22  9:40 ` [PATCH v2 13/16] dt-bindings/interrupt-controller: add documentation for Marvell SEI controller Miquel Raynal
2018-06-05 20:51   ` Rob Herring
2018-06-08 14:46     ` Miquel Raynal
2018-06-22 14:57       ` Miquel Raynal
2018-05-22  9:40 ` [PATCH v2 14/16] arm64: dts: marvell: add AP806 SEI subnode Miquel Raynal
2018-05-22  9:40 ` [PATCH v2 15/16] arm64: dts: marvell: use new bindings for CP110 interrupts Miquel Raynal
2018-05-22  9:40 ` [PATCH v2 16/16] arm64: dts: marvell: add CP110 ICU SEI subnode Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180522094042.24770-10-miquel.raynal@bootlin.com \
    --to=miquel.raynal@bootlin.com \
    --cc=andrew@lunn.ch \
    --cc=antoine.tenart@bootlin.com \
    --cc=catalin.marinas@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregory.clement@bootlin.com \
    --cc=hannah@marvell.com \
    --cc=hayim@marvell.com \
    --cc=jason@lakedaemon.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marc.zyngier@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=maxime.chevallier@bootlin.com \
    --cc=nadavh@marvell.com \
    --cc=robh+dt@kernel.org \
    --cc=sebastian.hesselbarth@gmail.com \
    --cc=tglx@linutronix.de \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).