linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Clément Péron" <peron.clem@gmail.com>
To: Colin Didier <colin.didier@devialet.com>,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: "Daniel Lezcano" <daniel.lezcano@linaro.org>,
	"Thomas Gleixner" <tglx@linutronix.de>,
	"Fabio Estevam" <fabio.estevam@nxp.com>,
	"Vladimir Zapolskiy" <vladimir_zapolskiy@mentor.com>,
	"Sascha Hauer" <s.hauer@pengutronix.de>,
	"Rob Herring" <robh@kernel.org>,
	"NXP Linux Team" <linux-imx@nxp.com>,
	"Pengutronix Kernel Team" <kernel@pengutronix.de>,
	"Clément Peron" <clement.peron@devialet.com>
Subject: [PATCH v5 3/4] clocksource: add driver for i.MX EPIT timer
Date: Mon,  4 Jun 2018 12:00:34 +0200	[thread overview]
Message-ID: <20180604100035.19558-4-peron.clem@gmail.com> (raw)
In-Reply-To: <20180604100035.19558-1-peron.clem@gmail.com>

From: Colin Didier <colin.didier@devialet.com>

Add driver for NXP's EPIT timer used in i.MX SoC.

Signed-off-by: Colin Didier <colin.didier@devialet.com>
Signed-off-by: Clément Peron <clement.peron@devialet.com>
---
 drivers/clocksource/Kconfig          |  11 ++
 drivers/clocksource/Makefile         |   1 +
 drivers/clocksource/timer-imx-epit.c | 265 +++++++++++++++++++++++++++
 3 files changed, 277 insertions(+)
 create mode 100644 drivers/clocksource/timer-imx-epit.c

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 8e8a09755d10..790478afd02c 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -576,6 +576,17 @@ config H8300_TPU
 	  This enables the clocksource for the H8300 platform with the
 	  H8S2678 cpu.
 
+config CLKSRC_IMX_EPIT
+	bool "Clocksource using i.MX EPIT"
+	depends on CLKDEV_LOOKUP && (ARCH_MXC || COMPILE_TEST)
+	select CLKSRC_MMIO
+	help
+	  This enables EPIT support available on some i.MX platforms.
+	  Normally you don't have a reason to do so as the EPIT has
+	  the same features and uses the same clocks as the GPT.
+	  Anyway, on some systems the GPT may be in use for other
+	  purposes.
+
 config CLKSRC_IMX_GPT
 	bool "Clocksource using i.MX GPT" if COMPILE_TEST
 	depends on ARM && CLKDEV_LOOKUP
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 00caf37e52f9..d9426f69ec69 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -69,6 +69,7 @@ obj-$(CONFIG_INTEGRATOR_AP_TIMER)	+= timer-integrator-ap.o
 obj-$(CONFIG_CLKSRC_VERSATILE)		+= versatile.o
 obj-$(CONFIG_CLKSRC_MIPS_GIC)		+= mips-gic-timer.o
 obj-$(CONFIG_CLKSRC_TANGO_XTAL)		+= tango_xtal.o
+obj-$(CONFIG_CLKSRC_IMX_EPIT)		+= timer-imx-epit.o
 obj-$(CONFIG_CLKSRC_IMX_GPT)		+= timer-imx-gpt.o
 obj-$(CONFIG_CLKSRC_IMX_TPM)		+= timer-imx-tpm.o
 obj-$(CONFIG_ASM9260_TIMER)		+= asm9260_timer.o
diff --git a/drivers/clocksource/timer-imx-epit.c b/drivers/clocksource/timer-imx-epit.c
new file mode 100644
index 000000000000..15f70e210fad
--- /dev/null
+++ b/drivers/clocksource/timer-imx-epit.c
@@ -0,0 +1,265 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * i.MX EPIT Timer
+ *
+ * Copyright (C) 2010 Sascha Hauer <s.hauer@pengutronix.de>
+ * Copyright (C) 2018 Colin Didier <colin.didier@devialet.com>
+ * Copyright (C) 2018 Clément Péron <clement.peron@devialet.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+#include <linux/slab.h>
+
+#define EPITCR				0x00
+#define EPITSR				0x04
+#define EPITLR				0x08
+#define EPITCMPR			0x0c
+#define EPITCNR				0x10
+
+#define EPITCR_EN			BIT(0)
+#define EPITCR_ENMOD			BIT(1)
+#define EPITCR_OCIEN			BIT(2)
+#define EPITCR_RLD			BIT(3)
+#define EPITCR_PRESC(x)			(((x) & 0xfff) << 4)
+#define EPITCR_SWR			BIT(16)
+#define EPITCR_IOVW			BIT(17)
+#define EPITCR_DBGEN			BIT(18)
+#define EPITCR_WAITEN			BIT(19)
+#define EPITCR_RES			BIT(20)
+#define EPITCR_STOPEN			BIT(21)
+#define EPITCR_OM_DISCON		(0 << 22)
+#define EPITCR_OM_TOGGLE		(1 << 22)
+#define EPITCR_OM_CLEAR			(2 << 22)
+#define EPITCR_OM_SET			(3 << 22)
+#define EPITCR_CLKSRC_OFF		(0 << 24)
+#define EPITCR_CLKSRC_PERIPHERAL	(1 << 24)
+#define EPITCR_CLKSRC_REF_HIGH		(2 << 24)
+#define EPITCR_CLKSRC_REF_LOW		(3 << 24)
+
+#define EPITSR_OCIF			BIT(0)
+
+struct epit_timer {
+	void __iomem *base;
+	int irq;
+	struct clk *clk;
+	struct clock_event_device ced;
+	struct irqaction act;
+};
+
+static void __iomem *sched_clock_reg;
+
+static inline struct epit_timer *to_epit_timer(struct clock_event_device *ced)
+{
+	return container_of(ced, struct epit_timer, ced);
+}
+
+static inline void epit_irq_disable(struct epit_timer *epittm)
+{
+	u32 val;
+
+	val = readl_relaxed(epittm->base + EPITCR);
+	writel_relaxed(val & ~EPITCR_OCIEN, epittm->base + EPITCR);
+}
+
+static inline void epit_irq_enable(struct epit_timer *epittm)
+{
+	u32 val;
+
+	val = readl_relaxed(epittm->base + EPITCR);
+	writel_relaxed(val | EPITCR_OCIEN, epittm->base + EPITCR);
+}
+
+static void epit_irq_acknowledge(struct epit_timer *epittm)
+{
+	writel_relaxed(EPITSR_OCIF, epittm->base + EPITSR);
+}
+
+static u64 notrace epit_read_sched_clock(void)
+{
+	return ~readl_relaxed(sched_clock_reg);
+}
+
+static int epit_set_next_event(unsigned long cycles,
+			       struct clock_event_device *ced)
+{
+	struct epit_timer *epittm = to_epit_timer(ced);
+	unsigned long tcmp;
+
+	tcmp = readl_relaxed(epittm->base + EPITCNR) - cycles;
+	writel_relaxed(tcmp, epittm->base + EPITCMPR);
+
+	return 0;
+}
+
+/* Left event sources disabled, no more interrupts appear */
+static int epit_shutdown(struct clock_event_device *ced)
+{
+	struct epit_timer *epittm = to_epit_timer(ced);
+	unsigned long flags;
+
+	/*
+	 * The timer interrupt generation is disabled at least
+	 * for enough time to call epit_set_next_event()
+	 */
+	local_irq_save(flags);
+
+	/* Disable interrupt in EPIT module */
+	epit_irq_disable(epittm);
+
+	/* Clear pending interrupt */
+	epit_irq_acknowledge(epittm);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static int epit_set_oneshot(struct clock_event_device *ced)
+{
+	struct epit_timer *epittm = to_epit_timer(ced);
+	unsigned long flags;
+
+	/*
+	 * The timer interrupt generation is disabled at least
+	 * for enough time to call epit_set_next_event()
+	 */
+	local_irq_save(flags);
+
+	/* Disable interrupt in EPIT module */
+	epit_irq_disable(epittm);
+
+	/* Clear pending interrupt, only while switching mode */
+	if (!clockevent_state_oneshot(ced))
+		epit_irq_acknowledge(epittm);
+
+	/*
+	 * Do not put overhead of interrupt enable/disable into
+	 * epit_set_next_event(), the core has about 4 minutes
+	 * to call epit_set_next_event() or shutdown clock after
+	 * mode switching
+	 */
+	epit_irq_enable(epittm);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static irqreturn_t epit_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *ced = dev_id;
+	struct epit_timer *epittm = to_epit_timer(ced);
+
+	epit_irq_acknowledge(epittm);
+
+	ced->event_handler(ced);
+
+	return IRQ_HANDLED;
+}
+
+static int __init epit_clocksource_init(struct epit_timer *epittm)
+{
+	unsigned int c = clk_get_rate(epittm->clk);
+
+	sched_clock_reg = epittm->base + EPITCNR;
+	sched_clock_register(epit_read_sched_clock, 32, c);
+
+	return clocksource_mmio_init(epittm->base + EPITCNR, "epit", c, 200, 32,
+				     clocksource_mmio_readl_down);
+}
+
+static int __init epit_clockevent_init(struct epit_timer *epittm)
+{
+	struct clock_event_device *ced = &epittm->ced;
+	struct irqaction *act = &epittm->act;
+
+	ced->name = "epit";
+	ced->features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_DYNIRQ;
+	ced->set_state_shutdown = epit_shutdown;
+	ced->tick_resume = epit_shutdown;
+	ced->set_state_oneshot = epit_set_oneshot;
+	ced->set_next_event = epit_set_next_event;
+	ced->rating = 200;
+	ced->cpumask = cpumask_of(0);
+	ced->irq = epittm->irq;
+	clockevents_config_and_register(ced, clk_get_rate(epittm->clk),
+					0xff, 0xfffffffe);
+
+	act->name = "i.MX EPIT Timer Tick",
+	act->flags = IRQF_TIMER | IRQF_IRQPOLL;
+	act->handler = epit_timer_interrupt;
+	act->dev_id = ced;
+
+	/* Make irqs happen */
+	return setup_irq(epittm->irq, act);
+}
+
+static int __init epit_timer_init(struct device_node *np)
+{
+	struct epit_timer *epittm;
+	int ret;
+
+	epittm = kzalloc(sizeof(*epittm), GFP_KERNEL);
+	if (!epittm)
+		return -ENOMEM;
+
+	epittm->base = of_iomap(np, 0);
+	if (!epittm->base) {
+		ret = -ENXIO;
+		goto out_kfree;
+	}
+
+	epittm->irq = irq_of_parse_and_map(np, 0);
+	if (!epittm->irq) {
+		ret = -EINVAL;
+		goto out_iounmap;
+	}
+
+        /* Get EPIT clock */
+        epittm->clk = of_clk_get(np, 0);
+        if (IS_ERR(epittm->clk)) {
+		pr_err("i.MX EPIT: unable to get clk\n");
+		ret = PTR_ERR(epittm->clk);
+		goto out_iounmap;
+        }
+
+	ret = clk_prepare_enable(epittm->clk);
+	if (ret) {
+		pr_err("i.MX EPIT: unable to prepare+enable clk\n");
+		goto out_iounmap;
+	}
+
+	/* Initialise to a known state (all timers off, and timing reset) */
+	writel_relaxed(0x0, epittm->base + EPITCR);
+	writel_relaxed(0xffffffff, epittm->base + EPITLR);
+	writel_relaxed(EPITCR_EN | EPITCR_CLKSRC_REF_HIGH | EPITCR_WAITEN,
+		       epittm->base + EPITCR);
+
+	ret = epit_clocksource_init(epittm);
+	if (ret) {
+		pr_err("i.MX EPIT: failed to init clocksource\n");
+		goto out_clk_disable;
+	}
+
+	ret = epit_clockevent_init(epittm);
+	if (ret) {
+		pr_err("i.MX EPIT: failed to init clockevent\n");
+		goto out_clk_disable;
+	}
+
+	return 0;
+
+out_clk_disable:
+	clk_disable_unprepare(epittm->clk);
+out_iounmap:
+	iounmap(epittm->base);
+out_kfree:
+	kfree(epittm);
+
+	return ret;
+}
+TIMER_OF_DECLARE(epit_timer, "fsl,imx31-epit", epit_timer_init);
-- 
2.17.0

  parent reply	other threads:[~2018-06-04 10:04 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-04 10:00 [PATCH v5 0/4] Reintroduce i.MX EPIT Timer Clément Péron
2018-06-04 10:00 ` [PATCH v5 1/4] ARM: imx: remove inexistant EPIT timer init Clément Péron
2018-06-04 10:00 ` [PATCH v5 2/4] dt-bindings: timer: add i.MX EPIT timer binding Clément Péron
2018-06-05 15:23   ` Rob Herring
2018-06-06  8:12     ` Clément Péron
2018-06-04 10:00 ` Clément Péron [this message]
2018-06-04 10:00 ` [PATCH v5 4/4] ARM: dts: imx: add missing compatible and clock properties for EPIT Clément Péron
2018-06-04 14:57   ` kbuild test robot
2018-06-05  2:10   ` kbuild test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180604100035.19558-4-peron.clem@gmail.com \
    --to=peron.clem@gmail.com \
    --cc=clement.peron@devialet.com \
    --cc=colin.didier@devialet.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=fabio.estevam@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=tglx@linutronix.de \
    --cc=vladimir_zapolskiy@mentor.com \
    --subject='Re: [PATCH v5 3/4] clocksource: add driver for i.MX EPIT timer' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).