[PATCH v5 0/4] Reintroduce i.MX EPIT Timer

[PATCH v5 0/4] Reintroduce i.MX EPIT Timer

[Clément Péron]

From: Clément Peron <clement.peron@devialet.com>

As suggested in the commit message we have added the device tree support,
proper bindings and we moved the driver into the correct folder.

Moreover we made some changes like use of relaxed IO accesor,
implement sched_clock, delay_timer and reduce the clockevents min_delta.

Changes since v4:
- removed ipg clk
- change in dt epit to timer
- add introduction in doc
- add all compatibles in doc
- update epit entry for other i.MX device-trees

Changes since v3:
- Clean Kconfig
- Rename imx6q-epit to imx31-epit
- Update doc and bindings
- Indent and fix

Changes since v2 (Thanks Fabio Estevam):
- Removed unused ckil clock
- Add out_iounmap
- Check and handle if clk_prepare_enable failed
- Fix comment typo

Changes since v1 (Thanks Vladimir Zapolskiy):
- Add OF dependency in Kconfig
- Sort header
- Use BIT macro
- Remove useless comments
- Fix incorrect indent
- Fix memory leak
- Add check and handle possible returned error

Clément Peron (2):
  ARM: imx: remove inexistant EPIT timer init
  dt-bindings: timer: add i.MX EPIT timer binding

Colin Didier (2):
  clocksource: add driver for i.MX EPIT timer
  ARM: dts: imx: add missing compatible and clock properties for EPIT

 .../devicetree/bindings/timer/fsl,imxepit.txt |  21 ++
 arch/arm/boot/dts/imx25.dtsi                  |   8 +-
 arch/arm/boot/dts/imx6qdl.dtsi                |  10 +-
 arch/arm/boot/dts/imx6sl.dtsi                 |  14 +-
 arch/arm/boot/dts/imx6sx.dtsi                 |  10 +-
 arch/arm/boot/dts/imx6ul.dtsi                 |  10 +-
 arch/arm/mach-imx/common.h                    |   1 -
 drivers/clocksource/Kconfig                   |  11 +
 drivers/clocksource/Makefile                  |   1 +
 drivers/clocksource/timer-imx-epit.c          | 265 ++++++++++++++++++
 10 files changed, 338 insertions(+), 13 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/timer/fsl,imxepit.txt
 create mode 100644 drivers/clocksource/timer-imx-epit.c

-- 
2.17.0

[PATCH v5 1/4] ARM: imx: remove inexistant EPIT timer init

[Clément Péron]

From: Clément Peron <clement.peron@devialet.com>

i.MX EPIT timer has been removed but not the init function declaration.

Signed-off-by: Clément Peron <clement.peron@devialet.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
---
 arch/arm/mach-imx/common.h | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index c8d68e918b2f..18aae76fa2da 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -38,7 +38,6 @@ void imx21_soc_init(void);
 void imx27_soc_init(void);
 void imx31_soc_init(void);
 void imx35_soc_init(void);
-void epit_timer_init(void __iomem *base, int irq);
 int mx21_clocks_init(unsigned long lref, unsigned long fref);
 int mx27_clocks_init(unsigned long fref);
 int mx31_clocks_init(unsigned long fref);
-- 
2.17.0

[PATCH v5 2/4] dt-bindings: timer: add i.MX EPIT timer binding

[Clément Péron]

From: Clément Peron <clement.peron@devialet.com>

Add devicetree binding document for NXP's i.MX SoC specific
EPIT timer driver.

Signed-off-by: Clément Peron <clement.peron@devialet.com>
---
 .../devicetree/bindings/timer/fsl,imxepit.txt | 21 +++++++++++++++++++
 1 file changed, 21 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/timer/fsl,imxepit.txt

diff --git a/Documentation/devicetree/bindings/timer/fsl,imxepit.txt b/Documentation/devicetree/bindings/timer/fsl,imxepit.txt
new file mode 100644
index 000000000000..de2e6ef68d24
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/fsl,imxepit.txt
@@ -0,0 +1,21 @@
+Binding for the i.MX Enhanced Periodic Interrupt Timer (EPIT)
+
+The Enhanced Periodic Interrupt Timer (EPIT) is a 32-bit set-and-forget timer
+that is capable of providing precise interrupts at regular intervals with
+minimal processor intervention.
+
+Required properties:
+- compatible: should be "fsl,<chip>-epit", "fsl,imx31-epit" where <chip> is
+  imx25, imx6qdl, imx6sl, imx6sul or imx6sx.
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: Should contain EPIT controller interrupt
+- clocks : The clock provided by the SoC to drive the timer.
+
+Example for i.MX6QDL:
+	epit1: epit@20d0000 {
+		compatible = "fsl,imx6qdl-epit", "fsl,imx31-epit";
+		reg = <0x020d0000 0x4000>;
+		interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks IMX6QDL_CLK_EPIT1>;
+	};
-- 
2.17.0

[PATCH v5 3/4] clocksource: add driver for i.MX EPIT timer

[Clément Péron]

From: Colin Didier <colin.didier@devialet.com>

Add driver for NXP's EPIT timer used in i.MX SoC.

Signed-off-by: Colin Didier <colin.didier@devialet.com>
Signed-off-by: Clément Peron <clement.peron@devialet.com>
---
 drivers/clocksource/Kconfig          |  11 ++
 drivers/clocksource/Makefile         |   1 +
 drivers/clocksource/timer-imx-epit.c | 265 +++++++++++++++++++++++++++
 3 files changed, 277 insertions(+)
 create mode 100644 drivers/clocksource/timer-imx-epit.c

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 8e8a09755d10..790478afd02c 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -576,6 +576,17 @@ config H8300_TPU
 	  This enables the clocksource for the H8300 platform with the
 	  H8S2678 cpu.
 
+config CLKSRC_IMX_EPIT
+	bool "Clocksource using i.MX EPIT"
+	depends on CLKDEV_LOOKUP && (ARCH_MXC || COMPILE_TEST)
+	select CLKSRC_MMIO
+	help
+	  This enables EPIT support available on some i.MX platforms.
+	  Normally you don't have a reason to do so as the EPIT has
+	  the same features and uses the same clocks as the GPT.
+	  Anyway, on some systems the GPT may be in use for other
+	  purposes.
+
 config CLKSRC_IMX_GPT
 	bool "Clocksource using i.MX GPT" if COMPILE_TEST
 	depends on ARM && CLKDEV_LOOKUP
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 00caf37e52f9..d9426f69ec69 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -69,6 +69,7 @@ obj-$(CONFIG_INTEGRATOR_AP_TIMER)	+= timer-integrator-ap.o
 obj-$(CONFIG_CLKSRC_VERSATILE)		+= versatile.o
 obj-$(CONFIG_CLKSRC_MIPS_GIC)		+= mips-gic-timer.o
 obj-$(CONFIG_CLKSRC_TANGO_XTAL)		+= tango_xtal.o
+obj-$(CONFIG_CLKSRC_IMX_EPIT)		+= timer-imx-epit.o
 obj-$(CONFIG_CLKSRC_IMX_GPT)		+= timer-imx-gpt.o
 obj-$(CONFIG_CLKSRC_IMX_TPM)		+= timer-imx-tpm.o
 obj-$(CONFIG_ASM9260_TIMER)		+= asm9260_timer.o
diff --git a/drivers/clocksource/timer-imx-epit.c b/drivers/clocksource/timer-imx-epit.c
new file mode 100644
index 000000000000..15f70e210fad
--- /dev/null
+++ b/drivers/clocksource/timer-imx-epit.c
@@ -0,0 +1,265 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * i.MX EPIT Timer
+ *
+ * Copyright (C) 2010 Sascha Hauer <s.hauer@pengutronix.de>
+ * Copyright (C) 2018 Colin Didier <colin.didier@devialet.com>
+ * Copyright (C) 2018 Clément Péron <clement.peron@devialet.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+#include <linux/slab.h>
+
+#define EPITCR				0x00
+#define EPITSR				0x04
+#define EPITLR				0x08
+#define EPITCMPR			0x0c
+#define EPITCNR				0x10
+
+#define EPITCR_EN			BIT(0)
+#define EPITCR_ENMOD			BIT(1)
+#define EPITCR_OCIEN			BIT(2)
+#define EPITCR_RLD			BIT(3)
+#define EPITCR_PRESC(x)			(((x) & 0xfff) << 4)
+#define EPITCR_SWR			BIT(16)
+#define EPITCR_IOVW			BIT(17)
+#define EPITCR_DBGEN			BIT(18)
+#define EPITCR_WAITEN			BIT(19)
+#define EPITCR_RES			BIT(20)
+#define EPITCR_STOPEN			BIT(21)
+#define EPITCR_OM_DISCON		(0 << 22)
+#define EPITCR_OM_TOGGLE		(1 << 22)
+#define EPITCR_OM_CLEAR			(2 << 22)
+#define EPITCR_OM_SET			(3 << 22)
+#define EPITCR_CLKSRC_OFF		(0 << 24)
+#define EPITCR_CLKSRC_PERIPHERAL	(1 << 24)
+#define EPITCR_CLKSRC_REF_HIGH		(2 << 24)
+#define EPITCR_CLKSRC_REF_LOW		(3 << 24)
+
+#define EPITSR_OCIF			BIT(0)
+
+struct epit_timer {
+	void __iomem *base;
+	int irq;
+	struct clk *clk;
+	struct clock_event_device ced;
+	struct irqaction act;
+};
+
+static void __iomem *sched_clock_reg;
+
+static inline struct epit_timer *to_epit_timer(struct clock_event_device *ced)
+{
+	return container_of(ced, struct epit_timer, ced);
+}
+
+static inline void epit_irq_disable(struct epit_timer *epittm)
+{
+	u32 val;
+
+	val = readl_relaxed(epittm->base + EPITCR);
+	writel_relaxed(val & ~EPITCR_OCIEN, epittm->base + EPITCR);
+}
+
+static inline void epit_irq_enable(struct epit_timer *epittm)
+{
+	u32 val;
+
+	val = readl_relaxed(epittm->base + EPITCR);
+	writel_relaxed(val | EPITCR_OCIEN, epittm->base + EPITCR);
+}
+
+static void epit_irq_acknowledge(struct epit_timer *epittm)
+{
+	writel_relaxed(EPITSR_OCIF, epittm->base + EPITSR);
+}
+
+static u64 notrace epit_read_sched_clock(void)
+{
+	return ~readl_relaxed(sched_clock_reg);
+}
+
+static int epit_set_next_event(unsigned long cycles,
+			       struct clock_event_device *ced)
+{
+	struct epit_timer *epittm = to_epit_timer(ced);
+	unsigned long tcmp;
+
+	tcmp = readl_relaxed(epittm->base + EPITCNR) - cycles;
+	writel_relaxed(tcmp, epittm->base + EPITCMPR);
+
+	return 0;
+}
+
+/* Left event sources disabled, no more interrupts appear */
+static int epit_shutdown(struct clock_event_device *ced)
+{
+	struct epit_timer *epittm = to_epit_timer(ced);
+	unsigned long flags;
+
+	/*
+	 * The timer interrupt generation is disabled at least
+	 * for enough time to call epit_set_next_event()
+	 */
+	local_irq_save(flags);
+
+	/* Disable interrupt in EPIT module */
+	epit_irq_disable(epittm);
+
+	/* Clear pending interrupt */
+	epit_irq_acknowledge(epittm);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static int epit_set_oneshot(struct clock_event_device *ced)
+{
+	struct epit_timer *epittm = to_epit_timer(ced);
+	unsigned long flags;
+
+	/*
+	 * The timer interrupt generation is disabled at least
+	 * for enough time to call epit_set_next_event()
+	 */
+	local_irq_save(flags);
+
+	/* Disable interrupt in EPIT module */
+	epit_irq_disable(epittm);
+
+	/* Clear pending interrupt, only while switching mode */
+	if (!clockevent_state_oneshot(ced))
+		epit_irq_acknowledge(epittm);
+
+	/*
+	 * Do not put overhead of interrupt enable/disable into
+	 * epit_set_next_event(), the core has about 4 minutes
+	 * to call epit_set_next_event() or shutdown clock after
+	 * mode switching
+	 */
+	epit_irq_enable(epittm);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static irqreturn_t epit_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *ced = dev_id;
+	struct epit_timer *epittm = to_epit_timer(ced);
+
+	epit_irq_acknowledge(epittm);
+
+	ced->event_handler(ced);
+
+	return IRQ_HANDLED;
+}
+
+static int __init epit_clocksource_init(struct epit_timer *epittm)
+{
+	unsigned int c = clk_get_rate(epittm->clk);
+
+	sched_clock_reg = epittm->base + EPITCNR;
+	sched_clock_register(epit_read_sched_clock, 32, c);
+
+	return clocksource_mmio_init(epittm->base + EPITCNR, "epit", c, 200, 32,
+				     clocksource_mmio_readl_down);
+}
+
+static int __init epit_clockevent_init(struct epit_timer *epittm)
+{
+	struct clock_event_device *ced = &epittm->ced;
+	struct irqaction *act = &epittm->act;
+
+	ced->name = "epit";
+	ced->features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_DYNIRQ;
+	ced->set_state_shutdown = epit_shutdown;
+	ced->tick_resume = epit_shutdown;
+	ced->set_state_oneshot = epit_set_oneshot;
+	ced->set_next_event = epit_set_next_event;
+	ced->rating = 200;
+	ced->cpumask = cpumask_of(0);
+	ced->irq = epittm->irq;
+	clockevents_config_and_register(ced, clk_get_rate(epittm->clk),
+					0xff, 0xfffffffe);
+
+	act->name = "i.MX EPIT Timer Tick",
+	act->flags = IRQF_TIMER | IRQF_IRQPOLL;
+	act->handler = epit_timer_interrupt;
+	act->dev_id = ced;
+
+	/* Make irqs happen */
+	return setup_irq(epittm->irq, act);
+}
+
+static int __init epit_timer_init(struct device_node *np)
+{
+	struct epit_timer *epittm;
+	int ret;
+
+	epittm = kzalloc(sizeof(*epittm), GFP_KERNEL);
+	if (!epittm)
+		return -ENOMEM;
+
+	epittm->base = of_iomap(np, 0);
+	if (!epittm->base) {
+		ret = -ENXIO;
+		goto out_kfree;
+	}
+
+	epittm->irq = irq_of_parse_and_map(np, 0);
+	if (!epittm->irq) {
+		ret = -EINVAL;
+		goto out_iounmap;
+	}
+
+        /* Get EPIT clock */
+        epittm->clk = of_clk_get(np, 0);
+        if (IS_ERR(epittm->clk)) {
+		pr_err("i.MX EPIT: unable to get clk\n");
+		ret = PTR_ERR(epittm->clk);
+		goto out_iounmap;
+        }
+
+	ret = clk_prepare_enable(epittm->clk);
+	if (ret) {
+		pr_err("i.MX EPIT: unable to prepare+enable clk\n");
+		goto out_iounmap;
+	}
+
+	/* Initialise to a known state (all timers off, and timing reset) */
+	writel_relaxed(0x0, epittm->base + EPITCR);
+	writel_relaxed(0xffffffff, epittm->base + EPITLR);
+	writel_relaxed(EPITCR_EN | EPITCR_CLKSRC_REF_HIGH | EPITCR_WAITEN,
+		       epittm->base + EPITCR);
+
+	ret = epit_clocksource_init(epittm);
+	if (ret) {
+		pr_err("i.MX EPIT: failed to init clocksource\n");
+		goto out_clk_disable;
+	}
+
+	ret = epit_clockevent_init(epittm);
+	if (ret) {
+		pr_err("i.MX EPIT: failed to init clockevent\n");
+		goto out_clk_disable;
+	}
+
+	return 0;
+
+out_clk_disable:
+	clk_disable_unprepare(epittm->clk);
+out_iounmap:
+	iounmap(epittm->base);
+out_kfree:
+	kfree(epittm);
+
+	return ret;
+}
+TIMER_OF_DECLARE(epit_timer, "fsl,imx31-epit", epit_timer_init);
-- 
2.17.0

[PATCH v5 4/4] ARM: dts: imx: add missing compatible and clock properties for EPIT

[Clément Péron]

From: Colin Didier <colin.didier@devialet.com>

Add missing compatible and clock properties for EPIT node.

Signed-off-by: Colin Didier <colin.didier@devialet.com>
Signed-off-by: Clément Peron <clement.peron@devialet.com>
---
 arch/arm/boot/dts/imx25.dtsi   |  8 ++++++--
 arch/arm/boot/dts/imx6qdl.dtsi | 10 ++++++++--
 arch/arm/boot/dts/imx6sl.dtsi  | 14 ++++++++++----
 arch/arm/boot/dts/imx6sx.dtsi  | 10 ++++++++--
 arch/arm/boot/dts/imx6ul.dtsi  | 10 ++++++++--
 5 files changed, 40 insertions(+), 12 deletions(-)

diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index cf70df20b19c..15fd4308dad8 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -396,15 +396,19 @@
 			};
 
 			epit1: timer@53f94000 {
-				compatible = "fsl,imx25-epit";
+				compatible = "fsl,imx25-epit", "fsl,imx31-epit";
 				reg = <0x53f94000 0x4000>;
 				interrupts = <28>;
+				clocks = <&clks 83>;
+				status = "disabled";
 			};
 
 			epit2: timer@53f98000 {
-				compatible = "fsl,imx25-epit";
+				compatible = "fsl,imx25-epit", "fsl,imx31-epit";
 				reg = <0x53f98000 0x4000>;
 				interrupts = <27>;
+				clocks = <&clks 84>;
+				status = "disabled";
 			};
 
 			gpio4: gpio@53f9c000 {
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index c003e62bf290..65c4ee07454c 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -843,14 +843,20 @@
 				};
 			};
 
-			epit1: epit@20d0000 { /* EPIT1 */
+			epit1: timer@20d0000 {
+				compatible = "fsl,imx6qdl-epit", "fsl,imx31-epit";
 				reg = <0x020d0000 0x4000>;
 				interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_EPIT1>;
+				status = "disabled";
 			};
 
-			epit2: epit@20d4000 { /* EPIT2 */
+			epit2: timer@20d4000 {
+				compatible = "fsl,imx6qdl-epit", "fsl,imx31-epit";
 				reg = <0x020d4000 0x4000>;
 				interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_EPIT2>;
+				status = "disabled";
 			};
 
 			src: src@20d8000 {
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index ab6a7e2e7e8f..6229bbef7ccc 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -671,14 +671,20 @@
 				};
 			};
 
-			epit1: epit@20d0000 {
+			epit1: timer@20d0000 {
+				compatible = "fsl,imx6sl-epit", "fsl,imx31-epit";
 				reg = <0x020d0000 0x4000>;
-				interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_EPIT1>;
+				status = "disabled";
 			};
 
-			epit2: epit@20d4000 {
+			epit2: timer@20d4000 {
+				compatible = "fsl,imx6sl-epit", "fsl,imx31-epit";
 				reg = <0x020d4000 0x4000>;
-				interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_EPIT2>;
+				status = "disabled";
 			};
 
 			src: src@20d8000 {
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 49c7205b8db8..2b30559d3270 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -736,14 +736,20 @@
 				};
 			};
 
-			epit1: epit@20d0000 {
+			epit1: timer@20d0000 {
+				compatible = "fsl,imx6sx-epit", "fsl,imx31-epit";
 				reg = <0x020d0000 0x4000>;
 				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_EPIT1>;
+				status = "disabled";
 			};
 
-			epit2: epit@20d4000 {
+			epit2: timer@20d4000 {
+				compatible = "fsl,imx6sx-epit", "fsl,imx31-epit";
 				reg = <0x020d4000 0x4000>;
 				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_EPIT2>;
+				status = "disabled";
 			};
 
 			src: src@20d8000 {
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 1241972b16ba..d5f765da1ee2 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -658,14 +658,20 @@
 				};
 			};
 
-			epit1: epit@20d0000 {
+			epit1: timer@20d0000 {
+				compatible = "fsl,imx6ul-epit", "fsl,imx31-epit";
 				reg = <0x020d0000 0x4000>;
 				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_EPIT1>;
+				status = "disabled";
 			};
 
-			epit2: epit@20d4000 {
+			epit2: timer@20d4000 {
+				compatible = "fsl,imx6ul-epit", "fsl,imx31-epit";
 				reg = <0x020d4000 0x4000>;
 				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_EPIT2>;
+				status = "disabled";
 			};
 
 			src: src@20d8000 {
-- 
2.17.0

Re: [PATCH v5 4/4] ARM: dts: imx: add missing compatible and clock properties for EPIT

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 1098 bytes --]

Hi Colin,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on shawnguo/for-next]
[also build test ERROR on v4.17 next-20180601]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Cl-ment-P-ron/Reintroduce-i-MX-EPIT-Timer/20180604-211036
base:   https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git for-next
config: arm-realview_defconfig (attached as .config)
compiler: arm-linux-gnueabi-gcc (Debian 7.2.0-11) 7.2.0
reproduce:
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=arm 

All errors (new ones prefixed by >>):

>> Error: arch/arm/boot/dts/imx6sl.dtsi:661.19-20 syntax error
   FATAL ERROR: Unable to parse input tree

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 18007 bytes --]

Re: [PATCH v5 4/4] ARM: dts: imx: add missing compatible and clock properties for EPIT

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 1098 bytes --]

Hi Colin,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on shawnguo/for-next]
[also build test ERROR on v4.17 next-20180601]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Cl-ment-P-ron/Reintroduce-i-MX-EPIT-Timer/20180604-211036
base:   https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git for-next
config: arm-at91_dt_defconfig (attached as .config)
compiler: arm-linux-gnueabi-gcc (Debian 7.2.0-11) 7.2.0
reproduce:
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=arm 

All errors (new ones prefixed by >>):

>> Error: arch/arm/boot/dts/imx6qdl.dtsi:832.21-22 syntax error
   FATAL ERROR: Unable to parse input tree

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 23243 bytes --]

Re: [PATCH v5 2/4] dt-bindings: timer: add i.MX EPIT timer binding

[Rob Herring]

On Mon, Jun 04, 2018 at 12:00:33PM +0200, Clément Péron wrote:
> From: Clément Peron <clement.peron@devialet.com>
> 
> Add devicetree binding document for NXP's i.MX SoC specific
> EPIT timer driver.
> 
> Signed-off-by: Clément Peron <clement.peron@devialet.com>
> ---
>  .../devicetree/bindings/timer/fsl,imxepit.txt | 21 +++++++++++++++++++
>  1 file changed, 21 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/timer/fsl,imxepit.txt
> 
> diff --git a/Documentation/devicetree/bindings/timer/fsl,imxepit.txt b/Documentation/devicetree/bindings/timer/fsl,imxepit.txt
> new file mode 100644
> index 000000000000..de2e6ef68d24
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/fsl,imxepit.txt
> @@ -0,0 +1,21 @@
> +Binding for the i.MX Enhanced Periodic Interrupt Timer (EPIT)
> +
> +The Enhanced Periodic Interrupt Timer (EPIT) is a 32-bit set-and-forget timer
> +that is capable of providing precise interrupts at regular intervals with
> +minimal processor intervention.
> +
> +Required properties:
> +- compatible: should be "fsl,<chip>-epit", "fsl,imx31-epit" where <chip> is
> +  imx25, imx6qdl, imx6sl, imx6sul or imx6sx.
> +- reg: physical base address of the controller and length of memory mapped
> +  region.
> +- interrupts: Should contain EPIT controller interrupt
> +- clocks : The clock provided by the SoC to drive the timer.
> +
> +Example for i.MX6QDL:
> +	epit1: epit@20d0000 {

I think I already mentioned this, but:

timer@...

> +		compatible = "fsl,imx6qdl-epit", "fsl,imx31-epit";
> +		reg = <0x020d0000 0x4000>;
> +		interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&clks IMX6QDL_CLK_EPIT1>;
> +	};
> -- 
> 2.17.0
> 

Re: [PATCH v5 2/4] dt-bindings: timer: add i.MX EPIT timer binding

[Clément Péron]

Hi Rob,

On Tue, 5 Jun 2018 at 17:23, Rob Herring <robh@kernel.org> wrote:
>
> On Mon, Jun 04, 2018 at 12:00:33PM +0200, Clément Péron wrote:
> > From: Clément Peron <clement.peron@devialet.com>
> >
> > Add devicetree binding document for NXP's i.MX SoC specific
> > EPIT timer driver.
> >
> > Signed-off-by: Clément Peron <clement.peron@devialet.com>
> > ---
> >  .../devicetree/bindings/timer/fsl,imxepit.txt | 21 +++++++++++++++++++
> >  1 file changed, 21 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/timer/fsl,imxepit.txt
> >
> > diff --git a/Documentation/devicetree/bindings/timer/fsl,imxepit.txt b/Documentation/devicetree/bindings/timer/fsl,imxepit.txt
> > new file mode 100644
> > index 000000000000..de2e6ef68d24
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/timer/fsl,imxepit.txt
> > @@ -0,0 +1,21 @@
> > +Binding for the i.MX Enhanced Periodic Interrupt Timer (EPIT)
> > +
> > +The Enhanced Periodic Interrupt Timer (EPIT) is a 32-bit set-and-forget timer
> > +that is capable of providing precise interrupts at regular intervals with
> > +minimal processor intervention.
> > +
> > +Required properties:
> > +- compatible: should be "fsl,<chip>-epit", "fsl,imx31-epit" where <chip> is
> > +  imx25, imx6qdl, imx6sl, imx6sul or imx6sx.
> > +- reg: physical base address of the controller and length of memory mapped
> > +  region.
> > +- interrupts: Should contain EPIT controller interrupt
> > +- clocks : The clock provided by the SoC to drive the timer.
> > +
> > +Example for i.MX6QDL:
> > +     epit1: epit@20d0000 {
>
> I think I already mentioned this, but:
My bad, will update it

>
> timer@...
>
> > +             compatible = "fsl,imx6qdl-epit", "fsl,imx31-epit";
> > +             reg = <0x020d0000 0x4000>;
> > +             interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
> > +             clocks = <&clks IMX6QDL_CLK_EPIT1>;
> > +     };
> > --
> > 2.17.0
> >