linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org,
	Wolfram Sang <wsa+renesas@sang-engineering.com>,
	Wolfram Sang <wsa@the-dreams.de>,
	Fabrizio Castro <fabrizio.castro@bp.renesas.com>,
	Chris Paterson <Chris.Paterson2@renesas.com>
Subject: [PATCH 4.4 20/37] i2c: rcar: init new messages in irq
Date: Tue,  5 Jun 2018 19:01:25 +0200	[thread overview]
Message-ID: <20180605170110.077770572@linuxfoundation.org> (raw)
In-Reply-To: <20180605170108.884872354@linuxfoundation.org>

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wolfram Sang <wsa+renesas@sang-engineering.com>

commit cc21d0b4b62e41e5013d763adade5ea4462c33a4 upstream.

Setting up new messages was done in process context while handling a
message was in interrupt context. Because of the HW design, this IP core
is sensitive to timing, so the context switches were too expensive. Move
this setup to interrupt context as well.

In my test setup, this fixed the occasional 'data byte sent twice' issue
which a number of people have seen. It also fixes to send REP_START
after a read message which was wrongly send as a STOP + START sequence
before.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/i2c/busses/i2c-rcar.c |   90 ++++++++++++++++++++----------------------
 1 file changed, 43 insertions(+), 47 deletions(-)

--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -267,10 +267,17 @@ static void rcar_i2c_prepare_msg(struct
 	rcar_i2c_write(priv, ICMIER, read ? RCAR_IRQ_RECV : RCAR_IRQ_SEND);
 }
 
+static void rcar_i2c_next_msg(struct rcar_i2c_priv *priv)
+{
+	priv->msg++;
+	priv->msgs_left--;
+	rcar_i2c_prepare_msg(priv);
+}
+
 /*
  *		interrupt functions
  */
-static int rcar_i2c_irq_send(struct rcar_i2c_priv *priv, u32 msr)
+static void rcar_i2c_irq_send(struct rcar_i2c_priv *priv, u32 msr)
 {
 	struct i2c_msg *msg = priv->msg;
 
@@ -280,7 +287,7 @@ static int rcar_i2c_irq_send(struct rcar
 	 * Do nothing
 	 */
 	if (!(msr & MDE))
-		return 0;
+		return;
 
 	/*
 	 * If address transfer phase finished,
@@ -309,29 +316,23 @@ static int rcar_i2c_irq_send(struct rcar
 		 * [ICRXTX] -> [SHIFT] -> [I2C bus]
 		 */
 
-		if (priv->flags & ID_LAST_MSG)
+		if (priv->flags & ID_LAST_MSG) {
 			/*
 			 * If current msg is the _LAST_ msg,
 			 * prepare stop condition here.
 			 * ID_DONE will be set on STOP irq.
 			 */
 			rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_STOP);
-		else
-			/*
-			 * If current msg is _NOT_ last msg,
-			 * it doesn't call stop phase.
-			 * thus, there is no STOP irq.
-			 * return ID_DONE here.
-			 */
-			return ID_DONE;
+		} else {
+			rcar_i2c_next_msg(priv);
+			return;
+		}
 	}
 
 	rcar_i2c_write(priv, ICMSR, RCAR_IRQ_ACK_SEND);
-
-	return 0;
 }
 
-static int rcar_i2c_irq_recv(struct rcar_i2c_priv *priv, u32 msr)
+static void rcar_i2c_irq_recv(struct rcar_i2c_priv *priv, u32 msr)
 {
 	struct i2c_msg *msg = priv->msg;
 
@@ -341,7 +342,7 @@ static int rcar_i2c_irq_recv(struct rcar
 	 * Do nothing
 	 */
 	if (!(msr & MDR))
-		return 0;
+		return;
 
 	if (msr & MAT) {
 		/*
@@ -367,9 +368,10 @@ static int rcar_i2c_irq_recv(struct rcar
 	else
 		rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_DATA);
 
-	rcar_i2c_write(priv, ICMSR, RCAR_IRQ_ACK_RECV);
-
-	return 0;
+	if (priv->pos == msg->len && !(priv->flags & ID_LAST_MSG))
+		rcar_i2c_next_msg(priv);
+	else
+		rcar_i2c_write(priv, ICMSR, RCAR_IRQ_ACK_RECV);
 }
 
 static bool rcar_i2c_slave_irq(struct rcar_i2c_priv *priv)
@@ -462,14 +464,15 @@ static irqreturn_t rcar_i2c_irq(int irq,
 
 	/* Stop */
 	if (msr & MST) {
+		priv->msgs_left--; /* The last message also made it */
 		rcar_i2c_flags_set(priv, ID_DONE);
 		goto out;
 	}
 
 	if (rcar_i2c_is_recv(priv))
-		rcar_i2c_flags_set(priv, rcar_i2c_irq_recv(priv, msr));
+		rcar_i2c_irq_recv(priv, msr);
 	else
-		rcar_i2c_flags_set(priv, rcar_i2c_irq_send(priv, msr));
+		rcar_i2c_irq_send(priv, msr);
 
 out:
 	if (rcar_i2c_flags_has(priv, ID_DONE)) {
@@ -501,35 +504,28 @@ static int rcar_i2c_master_xfer(struct i
 		/* This HW can't send STOP after address phase */
 		if (msgs[i].len == 0) {
 			ret = -EOPNOTSUPP;
-			break;
-		}
-
-		/* init each data */
-		priv->msg = &msgs[i];
-		priv->msgs_left = num - i;
-
-		rcar_i2c_prepare_msg(priv);
-
-		time_left = wait_event_timeout(priv->wait,
-					     rcar_i2c_flags_has(priv, ID_DONE),
-					     adap->timeout);
-		if (!time_left) {
-			rcar_i2c_init(priv);
-			ret = -ETIMEDOUT;
-			break;
-		}
-
-		if (rcar_i2c_flags_has(priv, ID_NACK)) {
-			ret = -ENXIO;
-			break;
-		}
-
-		if (rcar_i2c_flags_has(priv, ID_ARBLOST)) {
-			ret = -EAGAIN;
-			break;
+			goto out;
 		}
+	}
 
-		ret = i + 1; /* The number of transfer */
+	/* init data */
+	priv->msg = msgs;
+	priv->msgs_left = num;
+
+	rcar_i2c_prepare_msg(priv);
+
+	time_left = wait_event_timeout(priv->wait,
+				     rcar_i2c_flags_has(priv, ID_DONE),
+				     num * adap->timeout);
+	if (!time_left) {
+		rcar_i2c_init(priv);
+		ret = -ETIMEDOUT;
+	} else if (rcar_i2c_flags_has(priv, ID_NACK)) {
+		ret = -ENXIO;
+	} else if (rcar_i2c_flags_has(priv, ID_ARBLOST)) {
+		ret = -EAGAIN;
+	} else {
+		ret = num - priv->msgs_left; /* The number of transfer */
 	}
 out:
 	pm_runtime_put(dev);

  parent reply	other threads:[~2018-06-05 17:27 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-05 17:01 [PATCH 4.4 00/37] 4.4.136-stable review Greg Kroah-Hartman
2018-06-05 17:01 ` [PATCH 4.4 01/37] arm64: lse: Add early clobbers to some input/output asm operands Greg Kroah-Hartman
2018-06-05 17:01 ` [PATCH 4.4 02/37] powerpc/64s: Clear PCR on boot Greg Kroah-Hartman
2018-06-05 17:01 ` [PATCH 4.4 03/37] USB: serial: cp210x: use tcflag_t to fix incompatible pointer type Greg Kroah-Hartman
2018-06-05 17:01 ` [PATCH 4.4 04/37] sh: New gcc support Greg Kroah-Hartman
2018-06-05 17:01 ` [PATCH 4.4 05/37] xfs: detect agfl count corruption and reset agfl Greg Kroah-Hartman
2018-06-05 17:01 ` [PATCH 4.4 06/37] Revert "ima: limit file hash setting by user to fix and log modes" Greg Kroah-Hartman
2018-06-05 17:01 ` [PATCH 4.4 07/37] Input: elan_i2c_smbus - fix corrupted stack Greg Kroah-Hartman
2018-06-05 17:01 ` [PATCH 4.4 08/37] tracing: Fix crash when freeing instances with event triggers Greg Kroah-Hartman
2018-06-05 17:01 ` [PATCH 4.4 09/37] selinux: KASAN: slab-out-of-bounds in xattr_getsecurity Greg Kroah-Hartman
2018-06-05 17:01 ` [PATCH 4.4 10/37] cfg80211: further limit wiphy names to 64 bytes Greg Kroah-Hartman
2018-06-05 17:01 ` [PATCH 4.4 11/37] rtlwifi: rtl8192cu: Remove variable self-assignment in rf.c Greg Kroah-Hartman
2018-06-05 17:01 ` [PATCH 4.4 12/37] ASoC: Intel: sst: remove redundant variable dma_dev_name Greg Kroah-Hartman
2018-06-05 17:01 ` [PATCH 4.4 13/37] irda: fix overly long udelay() Greg Kroah-Hartman
2018-06-05 17:01 ` [PATCH 4.4 14/37] tcp: avoid integer overflows in tcp_rcv_space_adjust() Greg Kroah-Hartman
2018-06-05 17:01 ` [PATCH 4.4 15/37] i2c: rcar: make sure clocks are on when doing clock calculation Greg Kroah-Hartman
2018-06-05 17:01 ` [PATCH 4.4 16/37] i2c: rcar: rework hw init Greg Kroah-Hartman
2018-06-18 18:46   ` Ben Hutchings
2018-06-25 10:05     ` Fabrizio Castro
2018-06-05 17:01 ` [PATCH 4.4 17/37] i2c: rcar: remove unused IOERROR state Greg Kroah-Hartman
2018-06-05 17:01 ` [PATCH 4.4 18/37] i2c: rcar: remove spinlock Greg Kroah-Hartman
2018-06-05 17:01 ` [PATCH 4.4 19/37] i2c: rcar: refactor setup of a msg Greg Kroah-Hartman
2018-06-05 17:01 ` Greg Kroah-Hartman [this message]
2018-06-05 17:01 ` [PATCH 4.4 21/37] i2c: rcar: dont issue stop when HW does it automatically Greg Kroah-Hartman
2018-06-05 17:01 ` [PATCH 4.4 22/37] i2c: rcar: check master irqs before slave irqs Greg Kroah-Hartman
2018-06-05 17:01 ` [PATCH 4.4 23/37] i2c: rcar: revoke START request early Greg Kroah-Hartman
2018-06-05 17:01 ` [PATCH 4.4 24/37] dmaengine: usb-dmac: fix endless loop in usb_dmac_chan_terminate_all() Greg Kroah-Hartman
2018-06-05 17:01 ` [PATCH 4.4 25/37] iio:kfifo_buf: check for uint overflow Greg Kroah-Hartman
2018-06-05 17:01 ` [PATCH 4.4 26/37] MIPS: ptrace: Fix PTRACE_PEEKUSR requests for 64-bit FGRs Greg Kroah-Hartman
2018-06-05 17:01 ` [PATCH 4.4 27/37] MIPS: prctl: Disallow FRE without FR with PR_SET_FP_MODE requests Greg Kroah-Hartman
2018-06-05 17:01 ` [PATCH 4.4 28/37] scsi: scsi_transport_srp: Fix shost to rport translation Greg Kroah-Hartman
2018-06-05 17:01 ` [PATCH 4.4 29/37] stm class: Use vmalloc for the master map Greg Kroah-Hartman
2018-06-05 17:01 ` [PATCH 4.4 30/37] hwtracing: stm: fix build error on some arches Greg Kroah-Hartman
2018-06-05 17:01 ` [PATCH 4.4 32/37] Kbuild: change CC_OPTIMIZE_FOR_SIZE definition Greg Kroah-Hartman
2018-06-05 17:01 ` [PATCH 4.4 33/37] fix io_destroy()/aio_complete() race Greg Kroah-Hartman
2018-06-05 17:01 ` [PATCH 4.4 34/37] mm: fix the NULL mapping case in __isolate_lru_page() Greg Kroah-Hartman
2018-06-05 17:01 ` [PATCH 4.4 35/37] sparc64: Add __multi3 for gcc 7.x and later Greg Kroah-Hartman
2018-06-05 17:01 ` [PATCH 4.4 36/37] sparc64: Dont clibber fixed registers in __multi4 Greg Kroah-Hartman
2018-06-05 21:59 ` [PATCH 4.4 00/37] 4.4.136-stable review Shuah Khan
2018-06-06  0:30 ` Nathan Chancellor
2018-06-06  8:19   ` Greg Kroah-Hartman
2018-06-06 11:18 ` Naresh Kamboju
2018-06-06 12:15   ` Greg Kroah-Hartman
2018-06-06 13:28 ` Guenter Roeck
2018-06-06 13:31   ` Greg Kroah-Hartman
2018-06-06 15:01     ` Guenter Roeck
2018-06-06 15:35       ` Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180605170110.077770572@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=Chris.Paterson2@renesas.com \
    --cc=fabrizio.castro@bp.renesas.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=wsa+renesas@sang-engineering.com \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).