From: Enric Balletbo i Serra <enric.balletbo@collabora.com>
To: linux-kernel@vger.kernel.org
Cc: kernel@collabora.com, devicetree@vger.kernel.org,
"Benoît Cousson" <bcousson@baylibre.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Tony Lindgren" <tony@atomide.com>,
"Mark Rutland" <mark.rutland@arm.com>,
linux-omap@vger.kernel.org
Subject: [PATCH 7/8] ARM: dts: am335x-sl50: fix label names for all LEDs.
Date: Wed, 6 Jun 2018 17:54:12 +0200 [thread overview]
Message-ID: <20180606155413.23542-7-enric.balletbo@collabora.com> (raw)
In-Reply-To: <20180606155413.23542-1-enric.balletbo@collabora.com>
Fix the label for all LEDs, we made a mistake setting the label names on
all LEDs, where says green should say red, and viceversa, where says red
should be green.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
arch/arm/boot/dts/am335x-sl50.dts | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts
index 495a4a0be25c..e11a6def36a4 100644
--- a/arch/arm/boot/dts/am335x-sl50.dts
+++ b/arch/arm/boot/dts/am335x-sl50.dts
@@ -33,25 +33,25 @@
pinctrl-0 = <&led_pins>;
led0 {
- label = "sl50:green:usr0";
+ label = "sl50:red:usr0";
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
default-state = "off";
};
led1 {
- label = "sl50:red:usr1";
+ label = "sl50:green:usr1";
gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
default-state = "off";
};
led2 {
- label = "sl50:green:usr2";
+ label = "sl50:red:usr2";
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
default-state = "off";
};
led3 {
- label = "sl50:red:usr3";
+ label = "sl50:green:usr3";
gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
default-state = "off";
};
@@ -430,6 +430,12 @@
/* PDI Bus - Battery system */
AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7) /* nBattReset gpmc_a0.gpio1_16 */
AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE7) /* BattPDIData gpmc_ad15.gpio1_15 */
+ /* FPGA */
+ AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE7) /* FPGA_DONE - gpmc_ad8.gpio0_22 */
+ AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7) /* FPGA_NRST - gpmc_a0.gpio1_16 */
+ AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7) /* FPGA_RUN - gpmc_a1.gpio1_17 */
+ AM33XX_IOPAD(0x864, PIN_INPUT_PULLUP | MUX_MODE7) /* ENFPGA - gpmc_a9.gpio1_25 */
+ AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) /* FPGA_PROGRAM - gpmc_a10.gpio1_26 */
>;
};
};
--
2.17.1
next prev parent reply other threads:[~2018-06-06 15:54 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-06 15:54 [PATCH 1/8] ARM: dts: am335x-sl50: update backlight nodes Enric Balletbo i Serra
2018-06-06 15:54 ` [PATCH 2/8] ARM: dts: am335x-sl50: use phy-phandle declarations Enric Balletbo i Serra
2018-06-06 15:54 ` [PATCH 3/8] ARM: dts: am335x-sl50: add a node for the LCD controller Enric Balletbo i Serra
2018-06-06 15:54 ` [PATCH 4/8] ARM: dts: am335x-sl50: set dr_mode to otg Enric Balletbo i Serra
2018-06-06 15:54 ` [PATCH 5/8] ARM: dts: am335x-sl50: add support for DS1339 Real Time Clock Enric Balletbo i Serra
2018-06-06 15:54 ` [PATCH 6/8] ARM: dts: am335x-sl50: use audio-graph-card for sound Enric Balletbo i Serra
2018-06-06 15:54 ` Enric Balletbo i Serra [this message]
2018-06-06 15:54 ` [PATCH 8/8] ARM: dts: am335x-sl50: enable tsadc on SL50 board Enric Balletbo i Serra
2018-07-03 7:18 ` [PATCH 1/8] ARM: dts: am335x-sl50: update backlight nodes Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180606155413.23542-7-enric.balletbo@collabora.com \
--to=enric.balletbo@collabora.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=kernel@collabora.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).