From: Joel Fernandes <joel@joelfernandes.org>
To: linux-kernel@vger.kernel.org
Cc: "Joel Fernandes (Google)" <joel@joelfernandes.org>,
Boqun Feng <boqun.feng@gmail.com>,
Byungchul Park <byungchul.park@lge.com>,
Ingo Molnar <mingo@redhat.com>, Julia Cartwright <julia@ni.com>,
linux-kselftest@vger.kernel.org,
Masami Hiramatsu <mhiramat@kernel.org>,
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>,
Namhyung Kim <namhyung@kernel.org>,
Paul McKenney <paulmck@linux.vnet.ibm.com>,
Peter Zijlstra <peterz@infradead.org>,
Steven Rostedt <rostedt@goodmis.org>,
Thomas Glexiner <tglx@linutronix.de>,
Tom Zanussi <tom.zanussi@linux.intel.com>
Subject: [PATCH v9 4/7] tracepoint: Make rcuidle tracepoint callers use SRCU
Date: Thu, 28 Jun 2018 11:21:46 -0700 [thread overview]
Message-ID: <20180628182149.226164-5-joel@joelfernandes.org> (raw)
In-Reply-To: <20180628182149.226164-1-joel@joelfernandes.org>
From: "Joel Fernandes (Google)" <joel@joelfernandes.org>
In recent tests with IRQ on/off tracepoints, a large performance
overhead ~10% is noticed when running hackbench. This is root caused to
calls to rcu_irq_enter_irqson and rcu_irq_exit_irqson from the
tracepoint code. Following a long discussion on the list [1] about this,
we concluded that srcu is a better alternative for use during rcu idle.
Although it does involve extra barriers, its lighter than the sched-rcu
version which has to do additional RCU calls to notify RCU idle about
entry into RCU sections.
In this patch, we change the underlying implementation of the
trace_*_rcuidle API to use SRCU. This has shown to improve performance
alot for the high frequency irq enable/disable tracepoints.
Test: Tested idle and preempt/irq tracepoints.
Here are some performance numbers:
With a run of the following 30 times on a single core x86 Qemu instance
with 1GB memory:
hackbench -g 4 -f 2 -l 3000
Completion times in seconds. CONFIG_PROVE_LOCKING=y.
No patches (without this series)
Mean: 3.048
Median: 3.025
Std Dev: 0.064
With Lockdep using irq tracepoints with RCU implementation:
Mean: 3.451 (-11.66 %)
Median: 3.447 (-12.22%)
Std Dev: 0.049
With Lockdep using irq tracepoints with SRCU implementation (this series):
Mean: 3.020 (I would consider the improvement against the "without
this series" case as just noise).
Median: 3.013
Std Dev: 0.033
[1] https://patchwork.kernel.org/patch/10344297/
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
---
include/linux/tracepoint.h | 49 +++++++++++++++++++++++++++++++-------
kernel/tracepoint.c | 16 ++++++++++++-
2 files changed, 56 insertions(+), 9 deletions(-)
diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h
index 19a690b559ca..beeb01e147f8 100644
--- a/include/linux/tracepoint.h
+++ b/include/linux/tracepoint.h
@@ -15,6 +15,7 @@
*/
#include <linux/smp.h>
+#include <linux/srcu.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/cpumask.h>
@@ -33,6 +34,8 @@ struct trace_eval_map {
#define TRACEPOINT_DEFAULT_PRIO 10
+extern struct srcu_struct tracepoint_srcu;
+
extern int
tracepoint_probe_register(struct tracepoint *tp, void *probe, void *data);
extern int
@@ -75,10 +78,16 @@ int unregister_tracepoint_module_notifier(struct notifier_block *nb)
* probe unregistration and the end of module exit to make sure there is no
* caller executing a probe when it is freed.
*/
+#ifdef CONFIG_TRACEPOINTS
static inline void tracepoint_synchronize_unregister(void)
{
+ synchronize_srcu(&tracepoint_srcu);
synchronize_sched();
}
+#else
+static inline void tracepoint_synchronize_unregister(void)
+{ }
+#endif
#ifdef CONFIG_HAVE_SYSCALL_TRACEPOINTS
extern int syscall_regfunc(void);
@@ -129,18 +138,38 @@ extern void syscall_unregfunc(void);
* as "(void *, void)". The DECLARE_TRACE_NOARGS() will pass in just
* "void *data", where as the DECLARE_TRACE() will pass in "void *data, proto".
*/
-#define __DO_TRACE(tp, proto, args, cond, rcucheck) \
+#define __DO_TRACE(tp, proto, args, cond, rcuidle) \
do { \
struct tracepoint_func *it_func_ptr; \
void *it_func; \
void *__data; \
+ int __maybe_unused idx = 0; \
\
if (!(cond)) \
return; \
- if (rcucheck) \
- rcu_irq_enter_irqson(); \
- rcu_read_lock_sched_notrace(); \
- it_func_ptr = rcu_dereference_sched((tp)->funcs); \
+ \
+ /* \
+ * For rcuidle callers, use srcu since sched-rcu \
+ * doesn't work from the idle path. \
+ */ \
+ if (rcuidle) { \
+ if (in_nmi()) { \
+ WARN_ON_ONCE(1); \
+ return; /* no srcu from nmi */ \
+ } \
+ \
+ idx = srcu_read_lock_notrace(&tracepoint_srcu); \
+ it_func_ptr = \
+ srcu_dereference_notrace((tp)->funcs, \
+ &tracepoint_srcu); \
+ /* To keep it consistent with !rcuidle path */ \
+ preempt_disable_notrace(); \
+ } else { \
+ rcu_read_lock_sched_notrace(); \
+ it_func_ptr = \
+ rcu_dereference_sched((tp)->funcs); \
+ } \
+ \
if (it_func_ptr) { \
do { \
it_func = (it_func_ptr)->func; \
@@ -148,9 +177,13 @@ extern void syscall_unregfunc(void);
((void(*)(proto))(it_func))(args); \
} while ((++it_func_ptr)->func); \
} \
- rcu_read_unlock_sched_notrace(); \
- if (rcucheck) \
- rcu_irq_exit_irqson(); \
+ \
+ if (rcuidle) { \
+ preempt_enable_notrace(); \
+ srcu_read_unlock_notrace(&tracepoint_srcu, idx);\
+ } else { \
+ rcu_read_unlock_sched_notrace(); \
+ } \
} while (0)
#ifndef MODULE
diff --git a/kernel/tracepoint.c b/kernel/tracepoint.c
index 6dc6356c3327..955148d91b74 100644
--- a/kernel/tracepoint.c
+++ b/kernel/tracepoint.c
@@ -31,6 +31,9 @@
extern struct tracepoint * const __start___tracepoints_ptrs[];
extern struct tracepoint * const __stop___tracepoints_ptrs[];
+DEFINE_SRCU(tracepoint_srcu);
+EXPORT_SYMBOL_GPL(tracepoint_srcu);
+
/* Set to 1 to enable tracepoint debug output */
static const int tracepoint_debug;
@@ -67,16 +70,27 @@ static inline void *allocate_probes(int count)
return p == NULL ? NULL : p->probes;
}
-static void rcu_free_old_probes(struct rcu_head *head)
+static void srcu_free_old_probes(struct rcu_head *head)
{
kfree(container_of(head, struct tp_probes, rcu));
}
+static void rcu_free_old_probes(struct rcu_head *head)
+{
+ call_srcu(&tracepoint_srcu, head, srcu_free_old_probes);
+}
+
static inline void release_probes(struct tracepoint_func *old)
{
if (old) {
struct tp_probes *tp_probes = container_of(old,
struct tp_probes, probes[0]);
+ /*
+ * Tracepoint probes are protected by both sched RCU and SRCU,
+ * by calling the SRCU callback in the sched RCU callback we
+ * cover both cases. So let us chain the SRCU and sched RCU
+ * callbacks to wait for both grace periods.
+ */
call_rcu_sched(&tp_probes->rcu, rcu_free_old_probes);
}
}
--
2.18.0.rc2.346.g013aa6912e-goog
next prev parent reply other threads:[~2018-06-28 18:23 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-28 18:21 [PATCH v9 0/7] Centralize and unify usage of preempt/irq tracepoints Joel Fernandes
2018-06-28 18:21 ` [PATCH v9 1/7] srcu: Add notrace variants of srcu_read_{lock,unlock} Joel Fernandes
2018-06-28 18:21 ` [PATCH v9 2/7] srcu: Add notrace variant of srcu_dereference Joel Fernandes
2018-06-28 18:21 ` [PATCH v9 3/7] trace/irqsoff: Split reset into separate functions Joel Fernandes
2018-06-28 18:21 ` Joel Fernandes [this message]
2018-07-11 12:49 ` [PATCH v9 4/7] tracepoint: Make rcuidle tracepoint callers use SRCU Peter Zijlstra
2018-07-11 13:00 ` Steven Rostedt
2018-07-11 14:27 ` Paul E. McKenney
2018-07-11 14:46 ` Steven Rostedt
2018-07-11 15:15 ` Paul E. McKenney
2018-07-11 20:56 ` Joel Fernandes
2018-07-12 1:22 ` Steven Rostedt
2018-07-12 2:35 ` Joel Fernandes
2018-07-11 20:52 ` Joel Fernandes
2018-07-12 3:21 ` Steven Rostedt
2018-07-12 4:28 ` Joel Fernandes
2018-07-12 13:35 ` Steven Rostedt
2018-07-12 19:17 ` Joel Fernandes
2018-07-12 20:15 ` Steven Rostedt
2018-07-12 20:29 ` Joel Fernandes
2018-07-12 20:31 ` Steven Rostedt
2018-07-11 12:53 ` Peter Zijlstra
2018-07-12 2:32 ` Joel Fernandes
2018-07-11 12:56 ` Peter Zijlstra
2018-07-11 13:06 ` Steven Rostedt
2018-07-11 15:17 ` Peter Zijlstra
2018-07-11 15:26 ` Steven Rostedt
2018-07-11 16:46 ` Mathieu Desnoyers
2018-07-11 16:40 ` Mathieu Desnoyers
2018-07-12 0:31 ` Joel Fernandes
2018-07-12 1:26 ` Steven Rostedt
2018-06-28 18:21 ` [PATCH v9 5/7] tracing: Centralize preemptirq tracepoints and unify their usage Joel Fernandes
2018-07-06 22:06 ` Steven Rostedt
2018-07-07 4:20 ` Joel Fernandes
2018-07-10 14:20 ` Steven Rostedt
2018-07-10 17:33 ` Joel Fernandes
2018-07-11 13:12 ` Peter Zijlstra
2018-07-11 13:19 ` Steven Rostedt
2018-07-11 13:22 ` Steven Rostedt
2018-07-12 8:38 ` Joel Fernandes
2018-07-12 13:37 ` Steven Rostedt
2018-07-12 0:44 ` Joel Fernandes
2018-06-28 18:21 ` [PATCH v9 6/7] lib: Add module to simulate atomic sections for testing preemptoff tracers Joel Fernandes
2018-07-11 0:47 ` Steven Rostedt
2018-07-11 5:26 ` Joel Fernandes
2018-06-28 18:21 ` [PATCH v9 7/7] kselftests: Add tests for the preemptoff and irqsoff tracers Joel Fernandes
2018-07-11 0:49 ` Steven Rostedt
2018-07-11 5:27 ` Joel Fernandes
2018-07-03 14:15 ` [PATCH v9 0/7] Centralize and unify usage of preempt/irq tracepoints Joel Fernandes
2018-07-03 14:23 ` Steven Rostedt
-- strict thread matches above, loose matches on Subject: below --
2018-06-21 22:32 Joel Fernandes
2018-06-21 22:32 ` [PATCH v9 4/7] tracepoint: Make rcuidle tracepoint callers use SRCU Joel Fernandes
2018-06-07 20:38 [PATCH v9 0/7] Centralize and unify usage of preempt/irq Joel Fernandes
2018-06-07 20:38 ` [PATCH v9 4/7] tracepoint: Make rcuidle tracepoint callers use SRCU Joel Fernandes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180628182149.226164-5-joel@joelfernandes.org \
--to=joel@joelfernandes.org \
--cc=boqun.feng@gmail.com \
--cc=byungchul.park@lge.com \
--cc=julia@ni.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=mathieu.desnoyers@efficios.com \
--cc=mhiramat@kernel.org \
--cc=mingo@redhat.com \
--cc=namhyung@kernel.org \
--cc=paulmck@linux.vnet.ibm.com \
--cc=peterz@infradead.org \
--cc=rostedt@goodmis.org \
--cc=tglx@linutronix.de \
--cc=tom.zanussi@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).