linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mike Rapoport <rppt@linux.vnet.ibm.com>
To: Michal Hocko <mhocko@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>,
	Geert Uytterhoeven <geert@linux-m68k.org>,
	Greg Ungerer <gerg@linux-m68k.org>, Sam Creasey <sammy@sammy.net>,
	linux-m68k <linux-m68k@lists.linux-m68k.org>,
	Linux MM <linux-mm@kvack.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2 3/3] m68k: switch to MEMBLOCK + NO_BOOTMEM
Date: Wed, 4 Jul 2018 15:43:35 +0300	[thread overview]
Message-ID: <20180704124335.GE4352@rapoport-lnx> (raw)
In-Reply-To: <20180704123627.GM22503@dhcp22.suse.cz>

On Wed, Jul 04, 2018 at 02:36:27PM +0200, Michal Hocko wrote:
> [CC Andrew - email thread starts
> http://lkml.kernel.org/r/1530685696-14672-1-git-send-email-rppt@linux.vnet.ibm.com]
> 
> OK, so here we go with the full patch.
> 
> From 0e8432b875d98a7a0d3f757fce2caa8d16a8de15 Mon Sep 17 00:00:00 2001
> From: Michal Hocko <mhocko@suse.com>
> Date: Wed, 4 Jul 2018 14:31:46 +0200
> Subject: [PATCH] memblock: do not complain about top-down allocations for
>  !MEMORY_HOTREMOVE
> 
> Mike Rapoport is converting architectures from bootmem to noboodmem
> allocator. While doing so for m68k Geert has noticed that he gets
> a scary looking warning
> WARNING: CPU: 0 PID: 0 at mm/memblock.c:230
> memblock_find_in_range_node+0x11c/0x1be
> memblock: bottom-up allocation failed, memory hotunplug may be affected
> Modules linked in:
> CPU: 0 PID: 0 Comm: swapper Not tainted
> 4.18.0-rc3-atari-01343-gf2fb5f2e09a97a3c-dirty #7
> Stack from 003c3e20:
>         003c3e20 0039cf44 00023800 00433000 ffffffff 00001000 00240000 000238aa
>         00378734 000000e6 004285ac 00000009 00000000 003c3e58 003787c0 003c3e74
>         003c3ea4 004285ac 00378734 000000e6 003787c0 00000000 00000000 00000001
>         00000000 00000010 00000000 00428490 003e3856 ffffffff ffffffff 003c3ed0
>         00044620 003c3ee0 00417a10 00240000 00000010 00000000 00000000 00000001
>         00000000 00000001 00240000 00000000 00000000 00000000 00001000 003e3856
> Call Trace: [<00023800>] __warn+0xa8/0xc2
>  [<00001000>] kernel_pg_dir+0x0/0x1000
>  [<00240000>] netdev_lower_get_next+0x2/0x22
>  [<000238aa>] warn_slowpath_fmt+0x2e/0x36
>  [<004285ac>] memblock_find_in_range_node+0x11c/0x1be
>  [<004285ac>] memblock_find_in_range_node+0x11c/0x1be
>  [<00428490>] memblock_find_in_range_node+0x0/0x1be
>  [<00044620>] vprintk_func+0x66/0x6e
>  [<00417a10>] memblock_virt_alloc_internal+0xd0/0x156
>  [<00240000>] netdev_lower_get_next+0x2/0x22
>  [<00240000>] netdev_lower_get_next+0x2/0x22
>  [<00001000>] kernel_pg_dir+0x0/0x1000
>  [<00417b8c>] memblock_virt_alloc_try_nid_nopanic+0x58/0x7a
>  [<00240000>] netdev_lower_get_next+0x2/0x22
>  [<00001000>] kernel_pg_dir+0x0/0x1000
>  [<00001000>] kernel_pg_dir+0x0/0x1000
>  [<00010000>] EXPTBL+0x234/0x400
>  [<00010000>] EXPTBL+0x234/0x400
>  [<002f3644>] alloc_node_mem_map+0x4a/0x66
>  [<00240000>] netdev_lower_get_next+0x2/0x22
>  [<004155ca>] free_area_init_node+0xe2/0x29e
>  [<00010000>] EXPTBL+0x234/0x400
>  [<00411392>] paging_init+0x430/0x462
>  [<00001000>] kernel_pg_dir+0x0/0x1000
>  [<000427cc>] printk+0x0/0x1a
>  [<00010000>] EXPTBL+0x234/0x400
>  [<0041084c>] setup_arch+0x1b8/0x22c
>  [<0040e020>] start_kernel+0x4a/0x40a
>  [<0040d344>] _sinittext+0x344/0x9e8
> 
> The warning is basically saying that a top-down allocation can break
> memory hotremove because memblock allocation is not movable. But m68k
> doesn't even support MEMORY_HOTREMOVE is there is no point to warn
> about it.
> 
> Make the warning conditional only to configurations that care.
> 
> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
> Signed-off-by: Michal Hocko <mhocko@suse.com>
> ---
>  mm/memblock.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/mm/memblock.c b/mm/memblock.c
> index 03d48d8835ba..2acec4033389 100644
> --- a/mm/memblock.c
> +++ b/mm/memblock.c
> @@ -227,7 +227,8 @@ phys_addr_t __init_memblock memblock_find_in_range_node(phys_addr_t size,
>  		 * so we use WARN_ONCE() here to see the stack trace if
>  		 * fail happens.
>  		 */
> -		WARN_ONCE(1, "memblock: bottom-up allocation failed, memory hotunplug may be affected\n");
> +		WARN_ONCE(IS_ENABLED(CONFIG_MEMORY_HOTREMOVE),
> +					"memblock: bottom-up allocation failed, memory hotremove may be affected\n");

nit: isn't the warning indented too much?

>  	}
> 
>  	return __memblock_find_range_top_down(start, end, size, align, nid,
> -- 
> 2.18.0
> 
> -- 
> Michal Hocko
> SUSE Labs
> 

-- 
Sincerely yours,
Mike.


  reply	other threads:[~2018-07-04 12:43 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-04  6:28 [PATCH v2 0/3] m68k: switch to MEMBLOCK + NO_BOOTMEM Mike Rapoport
2018-07-04  6:28 ` [PATCH v2 1/3] m68k/bitops: convert __ffs to match generic declaration Mike Rapoport
2018-07-04  6:28 ` [PATCH v2 2/3] m68k/page_no.h: force __va argument to be unsigned long Mike Rapoport
2018-07-04  6:28 ` [PATCH v2 3/3] m68k: switch to MEMBLOCK + NO_BOOTMEM Mike Rapoport
2018-07-04  7:44   ` Geert Uytterhoeven
2018-07-04  7:54     ` Michal Hocko
2018-07-04  8:21       ` Geert Uytterhoeven
2018-07-04 12:22       ` Vlastimil Babka
2018-07-04 12:36         ` Michal Hocko
2018-07-04 12:43           ` Mike Rapoport [this message]
2018-07-04 12:51             ` Michal Hocko
2018-07-04 12:57               ` Mike Rapoport
2018-07-04 13:05           ` Geert Uytterhoeven
2018-07-04 13:14             ` Michal Hocko
2018-07-06  6:17           ` Michal Hocko
2018-07-05 12:13 ` [PATCH v2 0/3] " Greg Ungerer
2018-07-18 11:39 ` Geert Uytterhoeven

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180704124335.GE4352@rapoport-lnx \
    --to=rppt@linux.vnet.ibm.com \
    --cc=geert@linux-m68k.org \
    --cc=gerg@linux-m68k.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-m68k@lists.linux-m68k.org \
    --cc=linux-mm@kvack.org \
    --cc=mhocko@kernel.org \
    --cc=sammy@sammy.net \
    --cc=vbabka@suse.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).