linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Matthias Kaehlcke <mka@chromium.org>
To: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Cc: marcel@holtmann.org, johan.hedberg@gmail.com,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	linux-bluetooth@vger.kernel.org, thierry.escande@linaro.org,
	rtatiya@codeaurora.org, hemantg@codeaurora.org,
	linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH v9 3/7] Bluetooth: btqca: Redefine qca_uart_setup() to generic function.
Date: Fri, 6 Jul 2018 15:35:24 -0700	[thread overview]
Message-ID: <20180706223524.GL129942@google.com> (raw)
In-Reply-To: <20180705165515.13340-4-bgodavar@codeaurora.org>

On Thu, Jul 05, 2018 at 10:25:11PM +0530, Balakrishna Godavarthi wrote:
> Redefinition of qca_uart_setup will help future Qualcomm Bluetooth
> SoC, to use the same function instead of duplicating the function.
> Added new arguments soc_type and soc_ver to the functions.
> 
> These arguments will help to decide type of firmware files
> to be loaded into Bluetooth chip.
> soc_type holds the Bluetooth chip connected to APPS processor.
> soc_ver holds the Bluetooth chip version.
> 
> Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
> ---
> Changes in v9:
>    * moved qca_read_soc_ver() to qca_setup().
> 
> Changes in v8:
>     * updated soc_type with enum.
> 
> Changes in v7:
>     * initial patch
>     * redefined qca_uart_setup function to generic.
> ---
>  drivers/bluetooth/btqca.c   | 17 ++++-------------
>  drivers/bluetooth/btqca.h   | 13 +++++++++++--
>  drivers/bluetooth/hci_qca.c | 11 ++++++++++-
>  3 files changed, 25 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
> index c5cf9cab438a..03bcbaaf1ae9 100644
> --- a/drivers/bluetooth/btqca.c
> +++ b/drivers/bluetooth/btqca.c
> @@ -327,9 +327,9 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
>  }
>  EXPORT_SYMBOL_GPL(qca_set_bdaddr_rome);
>  
> -int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate)
> +int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> +		   enum qca_btsoc_type soc_type, u32 soc_ver)
>  {
> -	u32 rome_ver = 0;
>  	struct rome_config config;
>  	int err;
>  
> @@ -337,19 +337,10 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate)
>  
>  	config.user_baud_rate = baudrate;
>  
> -	/* Get QCA version information */
> -	err = qca_read_soc_version(hdev, &rome_ver);
> -	if (err < 0 || rome_ver == 0) {
> -		bt_dev_err(hdev, "QCA Failed to get version %d", err);
> -		return err;
> -	}
> -
> -	bt_dev_info(hdev, "QCA controller version 0x%08x", rome_ver);
> -
>  	/* Download rampatch file */
>  	config.type = TLV_TYPE_PATCH;
>  	snprintf(config.fwname, sizeof(config.fwname), "qca/rampatch_%08x.bin",
> -		 rome_ver);
> +		 soc_ver);
>  	err = qca_download_firmware(hdev, &config);
>  	if (err < 0) {
>  		bt_dev_err(hdev, "QCA Failed to download patch (%d)", err);
> @@ -359,7 +350,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate)
>  	/* Download NVM configuration */
>  	config.type = TLV_TYPE_NVM;
>  	snprintf(config.fwname, sizeof(config.fwname), "qca/nvm_%08x.bin",
> -		 rome_ver);
> +		 soc_ver);
>  	err = qca_download_firmware(hdev, &config);
>  	if (err < 0) {
>  		bt_dev_err(hdev, "QCA Failed to download NVM (%d)", err);
> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
> index 5c9851b11838..a9c2779f3e07 100644
> --- a/drivers/bluetooth/btqca.h
> +++ b/drivers/bluetooth/btqca.h
> @@ -124,10 +124,18 @@ struct tlv_type_hdr {
>  	__u8   data[0];
>  } __packed;
>  
> +enum qca_btsoc_type {
> +	QCA_INVALID = -1,
> +	QCA_AR3002,
> +	QCA_ROME,
> +	QCA_WCN3990
> +};
> +
>  #if IS_ENABLED(CONFIG_BT_QCA)
>  
>  int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr);
> -int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate);
> +int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> +		   enum qca_btsoc_type soc_type, u32 soc_ver);
>  int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version);
>  
>  #else
> @@ -137,7 +145,8 @@ static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdad
>  	return -EOPNOTSUPP;
>  }
>  
> -static inline int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate)
> +static inline int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> +				 enum qca_btsoc_type soc_type, u32 soc_ver)
>  {
>  	return -EOPNOTSUPP;
>  }
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index d7b60669b656..c02e1d465cca 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -929,6 +929,7 @@ static int qca_setup(struct hci_uart *hu)
>  	struct qca_data *qca = hu->priv;
>  	unsigned int speed, qca_baudrate = QCA_BAUDRATE_115200;
>  	int ret;
> +	int soc_ver = 0;
>  
>  	bt_dev_info(hdev, "ROME setup");
>  
> @@ -965,8 +966,16 @@ static int qca_setup(struct hci_uart *hu)
>  		host_set_baudrate(hu, speed);
>  	}
>  
> +	/* Get QCA version information */
> +	ret = qca_read_soc_version(hdev, &soc_ver);
> +	if (ret < 0 || soc_ver == 0) {
> +		bt_dev_err(hdev, "QCA Failed to get version (%d)", ret);
> +		return ret;
> +	}
> +	bt_dev_info(hdev, "QCA controller version 0x%08x", soc_ver);

As commented on [1] I'd suggest to move some of the logging and error
handling to qca_read_soc_version(), especially since this sequence is
duplicated later in this series.

Not really the scope of this patch though, so:

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>

[1] https://patchwork.kernel.org/patch/10510029/

  reply	other threads:[~2018-07-06 22:35 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-05 16:55 [PATCH v9 0/7] Enable Bluetooth functionality for WCN3990 Balakrishna Godavarthi
2018-07-05 16:55 ` [PATCH v9 1/7] dt-bindings: net: bluetooth: Add device tree bindings for QTI chip wcn3990 Balakrishna Godavarthi
2018-07-05 20:42   ` Rob Herring
2018-07-10 12:32     ` Balakrishna Godavarthi
2018-07-05 16:55 ` [PATCH v9 2/7] Bluetooth: btqca: Rename ROME specific functions to generic functions Balakrishna Godavarthi
2018-07-05 16:55 ` [PATCH v9 3/7] Bluetooth: btqca: Redefine qca_uart_setup() to generic function Balakrishna Godavarthi
2018-07-06 22:35   ` Matthias Kaehlcke [this message]
2018-07-05 16:55 ` [PATCH v9 4/7] Bluetooth: hci_qca: Add wrapper functions for setting UART speed Balakrishna Godavarthi
2018-07-06 19:40   ` Matthias Kaehlcke
2018-07-10 12:19     ` Balakrishna Godavarthi
2018-07-10 16:12       ` Matthias Kaehlcke
2018-07-05 16:55 ` [PATCH v9 5/7] Bluetooth: hci_qca: Enable 3.2 Mbps operating speed Balakrishna Godavarthi
2018-07-05 16:55 ` [PATCH v9 6/7] Bluetooth: btqca: Add wcn3990 firmware download support Balakrishna Godavarthi
2018-07-05 16:55 ` [PATCH v9 7/7] Bluetooth: hci_qca: Add support for Qualcomm Bluetooth chip wcn3990 Balakrishna Godavarthi
2018-07-06 22:21   ` Matthias Kaehlcke
2018-07-10 12:52     ` Balakrishna Godavarthi
2018-07-10 16:39       ` Matthias Kaehlcke
2018-07-17 15:18         ` Balakrishna Godavarthi
2018-07-16 13:51     ` Balakrishna Godavarthi
2018-07-16 16:05       ` Matthias Kaehlcke
2018-07-17 13:46         ` Balakrishna Godavarthi
2018-07-18 15:33         ` Balakrishna Godavarthi
2018-07-18 17:13           ` Matthias Kaehlcke
2018-07-20 12:46             ` Balakrishna Godavarthi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180706223524.GL129942@google.com \
    --to=mka@chromium.org \
    --cc=bgodavar@codeaurora.org \
    --cc=devicetree@vger.kernel.org \
    --cc=hemantg@codeaurora.org \
    --cc=johan.hedberg@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcel@holtmann.org \
    --cc=rtatiya@codeaurora.org \
    --cc=thierry.escande@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).