* include architecture Kconfig files from top-level Kconfig v2
@ 2018-07-08 15:19 Christoph Hellwig
2018-07-08 15:19 ` [PATCH 1/9] um: stop abusing KBUILD_KCONFIG Christoph Hellwig
` (9 more replies)
0 siblings, 10 replies; 23+ messages in thread
From: Christoph Hellwig @ 2018-07-08 15:19 UTC (permalink / raw)
To: Masahiro Yamada
Cc: Randy Dunlap, Richard Weinberger, linux-kbuild, linux-um, linux-kernel
Hi Masahiro,
what do you think about the series below, which moves the includes
of all the architecture independ Kconfig files to the top-level
Kconfig instead of duplicating the includes in all architectures?
Note that this only handles the low-hanging fruite, there are a lot
of other bits that should probably be cleaned up to be common,
but those will be not entirely trivial.
Changes since v1:
- add back a remove source statement from arch/arm/Kconfig
- various fixes from Randy
- various UML patches to be able to use the common Kconfig
^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 1/9] um: stop abusing KBUILD_KCONFIG
2018-07-08 15:19 include architecture Kconfig files from top-level Kconfig v2 Christoph Hellwig
@ 2018-07-08 15:19 ` Christoph Hellwig
2018-07-08 15:19 ` [PATCH 2/9] um: cleanup Kconfig files Christoph Hellwig
` (8 subsequent siblings)
9 siblings, 0 replies; 23+ messages in thread
From: Christoph Hellwig @ 2018-07-08 15:19 UTC (permalink / raw)
To: Masahiro Yamada
Cc: Randy Dunlap, Richard Weinberger, linux-kbuild, linux-um, linux-kernel
Instead create a arch/um/Kconfig file that just includes the actual
per-arch Kconfig file.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
arch/um/Kconfig | 3 +++
arch/um/Makefile | 2 --
arch/x86/um/Kconfig | 5 -----
3 files changed, 3 insertions(+), 7 deletions(-)
create mode 100644 arch/um/Kconfig
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
new file mode 100644
index 000000000000..24607af202dc
--- /dev/null
+++ b/arch/um/Kconfig
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+
+source "arch/$(SUBARCH)/um/Kconfig"
diff --git a/arch/um/Makefile b/arch/um/Makefile
index e54dda8a0363..0207f6316d71 100644
--- a/arch/um/Makefile
+++ b/arch/um/Makefile
@@ -113,8 +113,6 @@ define archhelp
echo ' find in the kernel root.'
endef
-KBUILD_KCONFIG := $(HOST_DIR)/um/Kconfig
-
archheaders:
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \
kbuild-file=$(HOST_DIR)/include/asm/Kbuild \
diff --git a/arch/x86/um/Kconfig b/arch/x86/um/Kconfig
index 9d529f22fd9d..7e509c83d80d 100644
--- a/arch/x86/um/Kconfig
+++ b/arch/x86/um/Kconfig
@@ -1,9 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
-mainmenu "User Mode Linux/$(SUBARCH) $(KERNELVERSION) Kernel Configuration"
-
-comment "Compiler: $(CC_VERSION_TEXT)"
-
-source "scripts/Kconfig.include"
source "arch/um/Kconfig.common"
--
2.18.0
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 2/9] um: cleanup Kconfig files
2018-07-08 15:19 include architecture Kconfig files from top-level Kconfig v2 Christoph Hellwig
2018-07-08 15:19 ` [PATCH 1/9] um: stop abusing KBUILD_KCONFIG Christoph Hellwig
@ 2018-07-08 15:19 ` Christoph Hellwig
2018-07-08 15:19 ` [PATCH 3/9] um: create a proper drivers Kconfig Christoph Hellwig
` (7 subsequent siblings)
9 siblings, 0 replies; 23+ messages in thread
From: Christoph Hellwig @ 2018-07-08 15:19 UTC (permalink / raw)
To: Masahiro Yamada
Cc: Randy Dunlap, Richard Weinberger, linux-kbuild, linux-um, linux-kernel
We can handle all not architecture specific UM configuration directly in
the newly added arch/um/Kconfig. Do so by merging the Kconfig.common,
Kconfig.rest and Kconfig.um files into arch/um/Kconfig, and move the main
UML menu as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
arch/um/Kconfig | 210 +++++++++++++++++++++++++++++++++++++++++
arch/um/Kconfig.common | 60 ------------
arch/um/Kconfig.rest | 22 -----
arch/um/Kconfig.um | 124 ------------------------
arch/x86/um/Kconfig | 10 --
5 files changed, 210 insertions(+), 216 deletions(-)
delete mode 100644 arch/um/Kconfig.common
delete mode 100644 arch/um/Kconfig.rest
delete mode 100644 arch/um/Kconfig.um
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
index 24607af202dc..1f605a7281cc 100644
--- a/arch/um/Kconfig
+++ b/arch/um/Kconfig
@@ -1,3 +1,213 @@
# SPDX-License-Identifier: GPL-2.0
+menu "UML-specific options"
+
+config UML
+ bool
+ default y
+ select ARCH_HAS_KCOV
+ select HAVE_ARCH_AUDITSYSCALL
+ select HAVE_ARCH_SECCOMP_FILTER
+ select HAVE_UID16
+ select HAVE_FUTEX_CMPXCHG if FUTEX
+ select HAVE_DEBUG_KMEMLEAK
+ select GENERIC_IRQ_SHOW
+ select GENERIC_CPU_DEVICES
+ select GENERIC_CLOCKEVENTS
+ select HAVE_GCC_PLUGINS
+ select TTY # Needed for line.c
+
+config MMU
+ bool
+ default y
+
+config NO_IOMEM
+ def_bool y
+
+config ISA
+ bool
+
+config SBUS
+ bool
+
+config PCI
+ bool
+
+config PCMCIA
+ bool
+
+config TRACE_IRQFLAGS_SUPPORT
+ bool
+ default y
+
+config LOCKDEP_SUPPORT
+ bool
+ default y
+
+config STACKTRACE_SUPPORT
+ bool
+ default y
+ select STACKTRACE
+
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default y
+
+config HZ
+ int
+ default 100
+
+config NR_CPUS
+ int
+ range 1 1
+ default 1
+
source "arch/$(SUBARCH)/um/Kconfig"
+
+config STATIC_LINK
+ bool "Force a static link"
+ default n
+ help
+ This option gives you the ability to force a static link of UML.
+ Normally, UML is linked as a shared binary. This is inconvenient for
+ use in a chroot jail. So, if you intend to run UML inside a chroot,
+ you probably want to say Y here.
+ Additionally, this option enables using higher memory spaces (up to
+ 2.75G) for UML.
+
+source "mm/Kconfig"
+
+config LD_SCRIPT_STATIC
+ bool
+ default y
+ depends on STATIC_LINK
+
+config LD_SCRIPT_DYN
+ bool
+ default y
+ depends on !LD_SCRIPT_STATIC
+ select MODULE_REL_CRCS if MODVERSIONS
+
+source "fs/Kconfig.binfmt"
+
+config HOSTFS
+ tristate "Host filesystem"
+ help
+ While the User-Mode Linux port uses its own root file system for
+ booting and normal file access, this module lets the UML user
+ access files stored on the host. It does not require any
+ network connection between the Host and UML. An example use of
+ this might be:
+
+ mount none /tmp/fromhost -t hostfs -o /tmp/umlshare
+
+ where /tmp/fromhost is an empty directory inside UML and
+ /tmp/umlshare is a directory on the host with files the UML user
+ wishes to access.
+
+ For more information, see
+ <http://user-mode-linux.sourceforge.net/hostfs.html>.
+
+ If you'd like to be able to work with files stored on the host,
+ say Y or M here; otherwise say N.
+
+config MCONSOLE
+ bool "Management console"
+ depends on PROC_FS
+ default y
+ help
+ The user mode linux management console is a low-level interface to
+ the kernel, somewhat like the i386 SysRq interface. Since there is
+ a full-blown operating system running under every user mode linux
+ instance, there is much greater flexibility possible than with the
+ SysRq mechanism.
+
+ If you answer 'Y' to this option, to use this feature, you need the
+ mconsole client (called uml_mconsole) which is present in CVS in
+ 2.4.5-9um and later (path /tools/mconsole), and is also in the
+ distribution RPM package in 2.4.6 and later.
+
+ It is safe to say 'Y' here.
+
+config MAGIC_SYSRQ
+ bool "Magic SysRq key"
+ depends on MCONSOLE
+ help
+ If you say Y here, you will have some control over the system even
+ if the system crashes for example during kernel debugging (e.g., you
+ will be able to flush the buffer cache to disk, reboot the system
+ immediately or dump some status information). A key for each of the
+ possible requests is provided.
+
+ This is the feature normally accomplished by pressing a key
+ while holding SysRq (Alt+PrintScreen).
+
+ On UML, this is accomplished by sending a "sysrq" command with
+ mconsole, followed by the letter for the requested command.
+
+ The keys are documented in <file:Documentation/admin-guide/sysrq.rst>. Don't say Y
+ unless you really know what this hack does.
+
+config KERNEL_STACK_ORDER
+ int "Kernel stack size order"
+ default 1 if 64BIT
+ range 1 10 if 64BIT
+ default 0 if !64BIT
+ help
+ This option determines the size of UML kernel stacks. They will
+ be 1 << order pages. The default is OK unless you're running Valgrind
+ on UML, in which case, set this to 3.
+
+config MMAPPER
+ tristate "iomem emulation driver"
+ help
+ This driver allows a host file to be used as emulated IO memory inside
+ UML.
+
+config NO_DMA
+ def_bool y
+
+config PGTABLE_LEVELS
+ int
+ default 3 if 3_LEVEL_PGTABLES
+ default 2
+
+config SECCOMP
+ def_bool y
+ prompt "Enable seccomp to safely compute untrusted bytecode"
+ ---help---
+ This kernel feature is useful for number crunching applications
+ that may need to compute untrusted bytecode during their
+ execution. By using pipes or other transports made available to
+ the process as file descriptors supporting the read/write
+ syscalls, it's possible to isolate those applications in
+ their own address space using seccomp. Once seccomp is
+ enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
+ and the task is only allowed to execute a few safe syscalls
+ defined by each seccomp mode.
+
+ If unsure, say Y.
+
+endmenu
+
+source "init/Kconfig"
+
+source "kernel/Kconfig.freezer"
+
+source "arch/um/Kconfig.char"
+
+source "drivers/Kconfig"
+
+source "net/Kconfig"
+
+source "arch/um/Kconfig.net"
+
+source "fs/Kconfig"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
+
+source "arch/um/Kconfig.debug"
diff --git a/arch/um/Kconfig.common b/arch/um/Kconfig.common
deleted file mode 100644
index 07f84c842cc3..000000000000
--- a/arch/um/Kconfig.common
+++ /dev/null
@@ -1,60 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-config UML
- bool
- default y
- select ARCH_HAS_KCOV
- select HAVE_ARCH_AUDITSYSCALL
- select HAVE_ARCH_SECCOMP_FILTER
- select HAVE_UID16
- select HAVE_FUTEX_CMPXCHG if FUTEX
- select HAVE_DEBUG_KMEMLEAK
- select GENERIC_IRQ_SHOW
- select GENERIC_CPU_DEVICES
- select GENERIC_CLOCKEVENTS
- select HAVE_GCC_PLUGINS
- select TTY # Needed for line.c
-
-config MMU
- bool
- default y
-
-config NO_IOMEM
- def_bool y
-
-config ISA
- bool
-
-config SBUS
- bool
-
-config PCI
- bool
-
-config PCMCIA
- bool
-
-config TRACE_IRQFLAGS_SUPPORT
- bool
- default y
-
-config LOCKDEP_SUPPORT
- bool
- default y
-
-config STACKTRACE_SUPPORT
- bool
- default y
- select STACKTRACE
-
-config GENERIC_CALIBRATE_DELAY
- bool
- default y
-
-config HZ
- int
- default 100
-
-config NR_CPUS
- int
- range 1 1
- default 1
diff --git a/arch/um/Kconfig.rest b/arch/um/Kconfig.rest
deleted file mode 100644
index 08327b9c0cbe..000000000000
--- a/arch/um/Kconfig.rest
+++ /dev/null
@@ -1,22 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-source "init/Kconfig"
-
-source "kernel/Kconfig.freezer"
-
-source "arch/um/Kconfig.char"
-
-source "drivers/Kconfig"
-
-source "net/Kconfig"
-
-source "arch/um/Kconfig.net"
-
-source "fs/Kconfig"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
-
-source "arch/um/Kconfig.debug"
diff --git a/arch/um/Kconfig.um b/arch/um/Kconfig.um
deleted file mode 100644
index 20da5a8ca949..000000000000
--- a/arch/um/Kconfig.um
+++ /dev/null
@@ -1,124 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-config STATIC_LINK
- bool "Force a static link"
- default n
- help
- This option gives you the ability to force a static link of UML.
- Normally, UML is linked as a shared binary. This is inconvenient for
- use in a chroot jail. So, if you intend to run UML inside a chroot,
- you probably want to say Y here.
- Additionally, this option enables using higher memory spaces (up to
- 2.75G) for UML.
-
-source "mm/Kconfig"
-
-config LD_SCRIPT_STATIC
- bool
- default y
- depends on STATIC_LINK
-
-config LD_SCRIPT_DYN
- bool
- default y
- depends on !LD_SCRIPT_STATIC
- select MODULE_REL_CRCS if MODVERSIONS
-
-source "fs/Kconfig.binfmt"
-
-config HOSTFS
- tristate "Host filesystem"
- help
- While the User-Mode Linux port uses its own root file system for
- booting and normal file access, this module lets the UML user
- access files stored on the host. It does not require any
- network connection between the Host and UML. An example use of
- this might be:
-
- mount none /tmp/fromhost -t hostfs -o /tmp/umlshare
-
- where /tmp/fromhost is an empty directory inside UML and
- /tmp/umlshare is a directory on the host with files the UML user
- wishes to access.
-
- For more information, see
- <http://user-mode-linux.sourceforge.net/hostfs.html>.
-
- If you'd like to be able to work with files stored on the host,
- say Y or M here; otherwise say N.
-
-config MCONSOLE
- bool "Management console"
- depends on PROC_FS
- default y
- help
- The user mode linux management console is a low-level interface to
- the kernel, somewhat like the i386 SysRq interface. Since there is
- a full-blown operating system running under every user mode linux
- instance, there is much greater flexibility possible than with the
- SysRq mechanism.
-
- If you answer 'Y' to this option, to use this feature, you need the
- mconsole client (called uml_mconsole) which is present in CVS in
- 2.4.5-9um and later (path /tools/mconsole), and is also in the
- distribution RPM package in 2.4.6 and later.
-
- It is safe to say 'Y' here.
-
-config MAGIC_SYSRQ
- bool "Magic SysRq key"
- depends on MCONSOLE
- help
- If you say Y here, you will have some control over the system even
- if the system crashes for example during kernel debugging (e.g., you
- will be able to flush the buffer cache to disk, reboot the system
- immediately or dump some status information). A key for each of the
- possible requests is provided.
-
- This is the feature normally accomplished by pressing a key
- while holding SysRq (Alt+PrintScreen).
-
- On UML, this is accomplished by sending a "sysrq" command with
- mconsole, followed by the letter for the requested command.
-
- The keys are documented in <file:Documentation/admin-guide/sysrq.rst>. Don't say Y
- unless you really know what this hack does.
-
-config KERNEL_STACK_ORDER
- int "Kernel stack size order"
- default 1 if 64BIT
- range 1 10 if 64BIT
- default 0 if !64BIT
- help
- This option determines the size of UML kernel stacks. They will
- be 1 << order pages. The default is OK unless you're running Valgrind
- on UML, in which case, set this to 3.
-
-config MMAPPER
- tristate "iomem emulation driver"
- help
- This driver allows a host file to be used as emulated IO memory inside
- UML.
-
-config NO_DMA
- def_bool y
-
-config PGTABLE_LEVELS
- int
- default 3 if 3_LEVEL_PGTABLES
- default 2
-
-config SECCOMP
- def_bool y
- prompt "Enable seccomp to safely compute untrusted bytecode"
- ---help---
- This kernel feature is useful for number crunching applications
- that may need to compute untrusted bytecode during their
- execution. By using pipes or other transports made available to
- the process as file descriptors supporting the read/write
- syscalls, it's possible to isolate those applications in
- their own address space using seccomp. Once seccomp is
- enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
- and the task is only allowed to execute a few safe syscalls
- defined by each seccomp mode.
-
- If unsure, say Y.
diff --git a/arch/x86/um/Kconfig b/arch/x86/um/Kconfig
index 7e509c83d80d..f518b4744ff8 100644
--- a/arch/x86/um/Kconfig
+++ b/arch/x86/um/Kconfig
@@ -1,9 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-source "arch/um/Kconfig.common"
-
-menu "UML-specific options"
-
menu "Host processor type and features"
source "arch/x86/Kconfig.cpu"
@@ -61,9 +57,3 @@ config ARCH_REUSE_HOST_VSYSCALL_AREA
config GENERIC_HWEIGHT
def_bool y
-
-source "arch/um/Kconfig.um"
-
-endmenu
-
-source "arch/um/Kconfig.rest"
--
2.18.0
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 3/9] um: create a proper drivers Kconfig
2018-07-08 15:19 include architecture Kconfig files from top-level Kconfig v2 Christoph Hellwig
2018-07-08 15:19 ` [PATCH 1/9] um: stop abusing KBUILD_KCONFIG Christoph Hellwig
2018-07-08 15:19 ` [PATCH 2/9] um: cleanup Kconfig files Christoph Hellwig
@ 2018-07-08 15:19 ` Christoph Hellwig
2018-07-08 15:19 ` [PATCH 4/9] kconfig: include common Kconfig files from top-level Kconfig Christoph Hellwig
` (6 subsequent siblings)
9 siblings, 0 replies; 23+ messages in thread
From: Christoph Hellwig @ 2018-07-08 15:19 UTC (permalink / raw)
To: Masahiro Yamada
Cc: Randy Dunlap, Richard Weinberger, linux-kbuild, linux-um, linux-kernel
Merge arch/um/Kconfig.char and arch/um/Kconfig.net into a new
arch/um/drivers/Kconfig. This fits the way Kconfig files are placed
elsewhere in the kernel tree.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
arch/um/Kconfig | 4 +-
arch/um/Kconfig.char | 124 ----------------------
arch/um/{Kconfig.net => drivers/Kconfig} | 125 ++++++++++++++++++++++-
3 files changed, 125 insertions(+), 128 deletions(-)
delete mode 100644 arch/um/Kconfig.char
rename arch/um/{Kconfig.net => drivers/Kconfig} (66%)
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
index 1f605a7281cc..fc17718fbe0e 100644
--- a/arch/um/Kconfig
+++ b/arch/um/Kconfig
@@ -194,14 +194,12 @@ source "init/Kconfig"
source "kernel/Kconfig.freezer"
-source "arch/um/Kconfig.char"
+source "arch/um/drivers/Kconfig"
source "drivers/Kconfig"
source "net/Kconfig"
-source "arch/um/Kconfig.net"
-
source "fs/Kconfig"
source "security/Kconfig"
diff --git a/arch/um/Kconfig.char b/arch/um/Kconfig.char
deleted file mode 100644
index f184bde7030e..000000000000
--- a/arch/um/Kconfig.char
+++ /dev/null
@@ -1,124 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-menu "UML Character Devices"
-
-config STDERR_CONSOLE
- bool "stderr console"
- default y
- help
- console driver which dumps all printk messages to stderr.
-
-config SSL
- bool "Virtual serial line"
- help
- The User-Mode Linux environment allows you to create virtual serial
- lines on the UML that are usually made to show up on the host as
- ttys or ptys.
-
- See <http://user-mode-linux.sourceforge.net/old/input.html> for more
- information and command line examples of how to use this facility.
-
- Unless you have a specific reason for disabling this, say Y.
-
-config NULL_CHAN
- bool "null channel support"
- help
- This option enables support for attaching UML consoles and serial
- lines to a device similar to /dev/null. Data written to it disappears
- and there is never any data to be read.
-
-config PORT_CHAN
- bool "port channel support"
- help
- This option enables support for attaching UML consoles and serial
- lines to host portals. They may be accessed with 'telnet <host>
- <port number>'. Any number of consoles and serial lines may be
- attached to a single portal, although what UML device you get when
- you telnet to that portal will be unpredictable.
- It is safe to say 'Y' here.
-
-config PTY_CHAN
- bool "pty channel support"
- help
- This option enables support for attaching UML consoles and serial
- lines to host pseudo-terminals. Access to both traditional
- pseudo-terminals (/dev/pty*) and pts pseudo-terminals are controlled
- with this option. The assignment of UML devices to host devices
- will be announced in the kernel message log.
- It is safe to say 'Y' here.
-
-config TTY_CHAN
- bool "tty channel support"
- help
- This option enables support for attaching UML consoles and serial
- lines to host terminals. Access to both virtual consoles
- (/dev/tty*) and the slave side of pseudo-terminals (/dev/ttyp* and
- /dev/pts/*) are controlled by this option.
- It is safe to say 'Y' here.
-
-config XTERM_CHAN
- bool "xterm channel support"
- help
- This option enables support for attaching UML consoles and serial
- lines to xterms. Each UML device so assigned will be brought up in
- its own xterm.
- It is safe to say 'Y' here.
-
-config NOCONFIG_CHAN
- bool
- default !(XTERM_CHAN && TTY_CHAN && PTY_CHAN && PORT_CHAN && NULL_CHAN)
-
-config CON_ZERO_CHAN
- string "Default main console channel initialization"
- default "fd:0,fd:1"
- help
- This is the string describing the channel to which the main console
- will be attached by default. This value can be overridden from the
- command line. The default value is "fd:0,fd:1", which attaches the
- main console to stdin and stdout.
- It is safe to leave this unchanged.
-
-config CON_CHAN
- string "Default console channel initialization"
- default "xterm"
- help
- This is the string describing the channel to which all consoles
- except the main console will be attached by default. This value can
- be overridden from the command line. The default value is "xterm",
- which brings them up in xterms.
- It is safe to leave this unchanged, although you may wish to change
- this if you expect the UML that you build to be run in environments
- which don't have X or xterm available.
-
-config SSL_CHAN
- string "Default serial line channel initialization"
- default "pty"
- help
- This is the string describing the channel to which the serial lines
- will be attached by default. This value can be overridden from the
- command line. The default value is "pty", which attaches them to
- traditional pseudo-terminals.
- It is safe to leave this unchanged, although you may wish to change
- this if you expect the UML that you build to be run in environments
- which don't have a set of /dev/pty* devices.
-
-config UML_SOUND
- tristate "Sound support"
- help
- This option enables UML sound support. If enabled, it will pull in
- soundcore and the UML hostaudio relay, which acts as a intermediary
- between the host's dsp and mixer devices and the UML sound system.
- It is safe to say 'Y' here.
-
-config SOUND
- tristate
- default UML_SOUND
-
-config SOUND_OSS_CORE
- bool
- default UML_SOUND
-
-config HOSTAUDIO
- tristate
- default UML_SOUND
-
-endmenu
diff --git a/arch/um/Kconfig.net b/arch/um/drivers/Kconfig
similarity index 66%
rename from arch/um/Kconfig.net
rename to arch/um/drivers/Kconfig
index c390f3deb0dc..2b1aaf7755aa 100644
--- a/arch/um/Kconfig.net
+++ b/arch/um/drivers/Kconfig
@@ -1,5 +1,129 @@
# SPDX-License-Identifier: GPL-2.0
+menu "UML Character Devices"
+
+config STDERR_CONSOLE
+ bool "stderr console"
+ default y
+ help
+ console driver which dumps all printk messages to stderr.
+
+config SSL
+ bool "Virtual serial line"
+ help
+ The User-Mode Linux environment allows you to create virtual serial
+ lines on the UML that are usually made to show up on the host as
+ ttys or ptys.
+
+ See <http://user-mode-linux.sourceforge.net/old/input.html> for more
+ information and command line examples of how to use this facility.
+
+ Unless you have a specific reason for disabling this, say Y.
+
+config NULL_CHAN
+ bool "null channel support"
+ help
+ This option enables support for attaching UML consoles and serial
+ lines to a device similar to /dev/null. Data written to it disappears
+ and there is never any data to be read.
+
+config PORT_CHAN
+ bool "port channel support"
+ help
+ This option enables support for attaching UML consoles and serial
+ lines to host portals. They may be accessed with 'telnet <host>
+ <port number>'. Any number of consoles and serial lines may be
+ attached to a single portal, although what UML device you get when
+ you telnet to that portal will be unpredictable.
+ It is safe to say 'Y' here.
+
+config PTY_CHAN
+ bool "pty channel support"
+ help
+ This option enables support for attaching UML consoles and serial
+ lines to host pseudo-terminals. Access to both traditional
+ pseudo-terminals (/dev/pty*) and pts pseudo-terminals are controlled
+ with this option. The assignment of UML devices to host devices
+ will be announced in the kernel message log.
+ It is safe to say 'Y' here.
+
+config TTY_CHAN
+ bool "tty channel support"
+ help
+ This option enables support for attaching UML consoles and serial
+ lines to host terminals. Access to both virtual consoles
+ (/dev/tty*) and the slave side of pseudo-terminals (/dev/ttyp* and
+ /dev/pts/*) are controlled by this option.
+ It is safe to say 'Y' here.
+
+config XTERM_CHAN
+ bool "xterm channel support"
+ help
+ This option enables support for attaching UML consoles and serial
+ lines to xterms. Each UML device so assigned will be brought up in
+ its own xterm.
+ It is safe to say 'Y' here.
+
+config NOCONFIG_CHAN
+ bool
+ default !(XTERM_CHAN && TTY_CHAN && PTY_CHAN && PORT_CHAN && NULL_CHAN)
+
+config CON_ZERO_CHAN
+ string "Default main console channel initialization"
+ default "fd:0,fd:1"
+ help
+ This is the string describing the channel to which the main console
+ will be attached by default. This value can be overridden from the
+ command line. The default value is "fd:0,fd:1", which attaches the
+ main console to stdin and stdout.
+ It is safe to leave this unchanged.
+
+config CON_CHAN
+ string "Default console channel initialization"
+ default "xterm"
+ help
+ This is the string describing the channel to which all consoles
+ except the main console will be attached by default. This value can
+ be overridden from the command line. The default value is "xterm",
+ which brings them up in xterms.
+ It is safe to leave this unchanged, although you may wish to change
+ this if you expect the UML that you build to be run in environments
+ which don't have X or xterm available.
+
+config SSL_CHAN
+ string "Default serial line channel initialization"
+ default "pty"
+ help
+ This is the string describing the channel to which the serial lines
+ will be attached by default. This value can be overridden from the
+ command line. The default value is "pty", which attaches them to
+ traditional pseudo-terminals.
+ It is safe to leave this unchanged, although you may wish to change
+ this if you expect the UML that you build to be run in environments
+ which don't have a set of /dev/pty* devices.
+
+config UML_SOUND
+ tristate "Sound support"
+ help
+ This option enables UML sound support. If enabled, it will pull in
+ soundcore and the UML hostaudio relay, which acts as a intermediary
+ between the host's dsp and mixer devices and the UML sound system.
+ It is safe to say 'Y' here.
+
+config SOUND
+ tristate
+ default UML_SOUND
+
+config SOUND_OSS_CORE
+ bool
+ default UML_SOUND
+
+config HOSTAUDIO
+ tristate
+ default UML_SOUND
+
+endmenu
+
menu "UML Network Devices"
depends on NET
@@ -211,4 +335,3 @@ config UML_NET_SLIRP
Startup example: "eth0=slirp,FE:FD:01:02:03:04,/usr/local/bin/slirp"
endmenu
-
--
2.18.0
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 4/9] kconfig: include common Kconfig files from top-level Kconfig
2018-07-08 15:19 include architecture Kconfig files from top-level Kconfig v2 Christoph Hellwig
` (2 preceding siblings ...)
2018-07-08 15:19 ` [PATCH 3/9] um: create a proper drivers Kconfig Christoph Hellwig
@ 2018-07-08 15:19 ` Christoph Hellwig
2018-07-11 12:21 ` Masahiro Yamada
2018-07-08 15:20 ` [PATCH 5/9] Kconfig: consolidate the "Kernel hacking" menu Christoph Hellwig
` (5 subsequent siblings)
9 siblings, 1 reply; 23+ messages in thread
From: Christoph Hellwig @ 2018-07-08 15:19 UTC (permalink / raw)
To: Masahiro Yamada
Cc: Randy Dunlap, Richard Weinberger, linux-kbuild, linux-um, linux-kernel
Instead of duplicating the source statements in every architecture just
do it once in the toplevel Kconfig file.
Note that with this the inclusion of arch/$(SRCARCH/Kconfig moves out of
the top-level Kconfig into arch/Kconfig so that don't violate ordering
constraits while keeping a sensible menu structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
Kconfig | 22 +++++++++++++++++++++-
arch/Kconfig | 6 ++++++
arch/alpha/Kconfig | 20 --------------------
arch/arc/Kconfig | 16 ----------------
arch/arm/Kconfig | 23 -----------------------
arch/arm64/Kconfig | 23 -----------------------
arch/c6x/Kconfig | 24 ------------------------
arch/h8300/Kconfig | 24 ------------------------
arch/hexagon/Kconfig | 16 ----------------
arch/ia64/Kconfig | 20 --------------------
arch/m68k/Kconfig | 24 ------------------------
arch/microblaze/Kconfig | 24 ------------------------
arch/mips/Kconfig | 24 ------------------------
arch/nds32/Kconfig | 16 ----------------
arch/nios2/Kconfig | 24 ------------------------
arch/openrisc/Kconfig | 23 -----------------------
arch/parisc/Kconfig | 24 ------------------------
arch/powerpc/Kconfig | 19 -------------------
arch/riscv/Kconfig | 24 ------------------------
arch/s390/Kconfig | 24 ------------------------
arch/sh/Kconfig | 24 ------------------------
arch/sparc/Kconfig | 24 ------------------------
arch/um/Kconfig | 20 --------------------
arch/unicore32/Kconfig | 24 ------------------------
arch/x86/Kconfig | 22 +---------------------
arch/xtensa/Kconfig | 25 -------------------------
init/Kconfig | 4 ++--
27 files changed, 30 insertions(+), 533 deletions(-)
diff --git a/Kconfig b/Kconfig
index a90d9f9e268b..1a5c0a5d4ea1 100644
--- a/Kconfig
+++ b/Kconfig
@@ -9,4 +9,24 @@ comment "Compiler: $(CC_VERSION_TEXT)"
source "scripts/Kconfig.include"
-source "arch/$(SRCARCH)/Kconfig"
+source "init/Kconfig"
+
+source "kernel/Kconfig.freezer"
+
+menu "Executable file formats"
+source "fs/Kconfig.binfmt"
+endmenu
+
+source "mm/Kconfig"
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
diff --git a/arch/Kconfig b/arch/Kconfig
index 1aa59063f1fd..09a561a70168 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -3,6 +3,12 @@
# General architecture dependent options
#
+#
+# Note: arch/$(SRCARCH)/Kconfig needs to be included first so that it can
+# override the default values in this file.
+#
+source "arch/$(SRCARCH)/Kconfig"
+
config CRASH_CORE
bool
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 04a4a138ed13..50676152babd 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -74,9 +74,6 @@ config PGTABLE_LEVELS
int
default 3
-source "init/Kconfig"
-source "kernel/Kconfig.freezer"
-
config AUDIT_ARCH
bool
@@ -573,8 +570,6 @@ config ARCH_DISCONTIGMEM_ENABLE
or have huge holes in the physical address space for other reasons.
See <file:Documentation/vm/numa.rst> for more.
-source "mm/Kconfig"
-
config NUMA
bool "NUMA Support (EXPERIMENTAL)"
depends on DISCONTIGMEM && BROKEN
@@ -713,16 +708,8 @@ config SRM_ENV
This driver is also available as a module and will be called
srm_env then.
-source "fs/Kconfig.binfmt"
-
endmenu
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "fs/Kconfig"
-
source "arch/alpha/Kconfig.debug"
# DUMMY_CONSOLE may be defined in drivers/video/console/Kconfig
@@ -731,10 +718,3 @@ config DUMMY_CONSOLE
bool
depends on VGA_HOSE
default y
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
-
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index e81bcd271be7..d4a28c45c406 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -94,9 +94,6 @@ config HAVE_ARCH_TRANSPARENT_HUGEPAGE
def_bool y
depends on ARC_MMU_V4
-source "init/Kconfig"
-source "kernel/Kconfig.freezer"
-
menu "ARC Architecture Configuration"
menu "ARC Platform/SoC/Board"
@@ -550,22 +547,13 @@ config ARC_BUILTIN_DTB_NAME
source "kernel/Kconfig.preempt"
-menu "Executable file formats"
-source "fs/Kconfig.binfmt"
-endmenu
-
endmenu # "ARC Architecture Configuration"
-source "mm/Kconfig"
-
config FORCE_MAX_ZONEORDER
int "Maximum zone order"
default "12" if ARC_HUGEPAGE_16M
default "11"
-source "net/Kconfig"
-source "drivers/Kconfig"
-
menu "Bus Support"
config PCI
@@ -586,9 +574,5 @@ source "drivers/pci/Kconfig"
endmenu
-source "fs/Kconfig"
source "arch/arc/Kconfig.debug"
-source "security/Kconfig"
-source "crypto/Kconfig"
-source "lib/Kconfig"
source "kernel/power/Kconfig"
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 843edfd000be..46ee6669204b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -298,10 +298,6 @@ config PGTABLE_LEVELS
default 3 if ARM_LPAE
default 2
-source "init/Kconfig"
-
-source "kernel/Kconfig.freezer"
-
menu "System Type"
config MMU
@@ -1721,8 +1717,6 @@ config ARM_MODULE_PLTS
Disabling this is usually safe for small single-platform
configurations. If unsure, say y.
-source "mm/Kconfig"
-
config FORCE_MAX_ZONEORDER
int "Maximum zone order"
default "12" if SOC_AM33XX
@@ -2175,12 +2169,6 @@ config KERNEL_MODE_NEON
endmenu
-menu "Userspace binary formats"
-
-source "fs/Kconfig.binfmt"
-
-endmenu
-
menu "Power management options"
source "kernel/power/Kconfig"
@@ -2201,23 +2189,12 @@ config ARCH_HIBERNATION_POSSIBLE
endmenu
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
source "drivers/firmware/Kconfig"
-source "fs/Kconfig"
-
source "arch/arm/Kconfig.debug"
-source "security/Kconfig"
-
-source "crypto/Kconfig"
if CRYPTO
source "arch/arm/crypto/Kconfig"
endif
-source "lib/Kconfig"
-
source "arch/arm/kvm/Kconfig"
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 42c090cf0292..fabd797c8645 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -267,10 +267,6 @@ config ARCH_PROC_KCORE_TEXT
config MULTI_IRQ_HANDLER
def_bool y
-source "init/Kconfig"
-
-source "kernel/Kconfig.freezer"
-
source "arch/arm64/Kconfig.platforms"
menu "Bus support"
@@ -791,8 +787,6 @@ config ARCH_WANT_HUGE_PMD_SHARE
config ARCH_HAS_CACHE_LINE_SIZE
def_bool y
-source "mm/Kconfig"
-
config SECCOMP
bool "Enable seccomp to safely compute untrusted bytecode"
---help---
@@ -1273,10 +1267,6 @@ config DMI
endmenu
-menu "Userspace binary formats"
-
-source "fs/Kconfig.binfmt"
-
config COMPAT
bool "Kernel support for 32-bit EL0"
depends on ARM64_4K_PAGES || EXPERT
@@ -1300,8 +1290,6 @@ config SYSVIPC_COMPAT
def_bool y
depends on COMPAT && SYSVIPC
-endmenu
-
menu "Power management options"
source "kernel/power/Kconfig"
@@ -1327,25 +1315,14 @@ source "drivers/cpufreq/Kconfig"
endmenu
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
source "drivers/firmware/Kconfig"
source "drivers/acpi/Kconfig"
-source "fs/Kconfig"
-
source "arch/arm64/kvm/Kconfig"
source "arch/arm64/Kconfig.debug"
-source "security/Kconfig"
-
-source "crypto/Kconfig"
if CRYPTO
source "arch/arm64/crypto/Kconfig"
endif
-
-source "lib/Kconfig"
diff --git a/arch/c6x/Kconfig b/arch/c6x/Kconfig
index bf59855628ac..441bbe089b96 100644
--- a/arch/c6x/Kconfig
+++ b/arch/c6x/Kconfig
@@ -53,12 +53,8 @@ config C6X_BIG_KERNEL
If unsure, say N.
-source "init/Kconfig"
-
# Use the generic interrupt handling code in kernel/irq/
-source "kernel/Kconfig.freezer"
-
config CMDLINE_BOOL
bool "Default bootloader kernel arguments"
@@ -114,32 +110,12 @@ config KERNEL_RAM_BASE_ADDRESS
default 0xe0000000 if SOC_TMS320C6472
default 0x80000000
-source "mm/Kconfig"
-
source "kernel/Kconfig.preempt"
source "kernel/Kconfig.hz"
endmenu
-menu "Executable file formats"
-
-source "fs/Kconfig.binfmt"
-
-endmenu
-
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "fs/Kconfig"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
-
menu "Kernel hacking"
source "lib/Kconfig.debug"
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
index 091d6d04b5e5..e23cd887f8f9 100644
--- a/arch/h8300/Kconfig
+++ b/arch/h8300/Kconfig
@@ -48,40 +48,16 @@ config NR_CPUS
int
default 1
-source "init/Kconfig"
-
-source "kernel/Kconfig.freezer"
-
source "arch/h8300/Kconfig.cpu"
menu "Kernel Features"
source "kernel/Kconfig.preempt"
-source "mm/Kconfig"
-
-endmenu
-
-menu "Executable file formats"
-
-source "fs/Kconfig.binfmt"
-
endmenu
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "fs/Kconfig"
-
menu "Kernel hacking"
source "lib/Kconfig.debug"
endmenu
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
diff --git a/arch/hexagon/Kconfig b/arch/hexagon/Kconfig
index 37adb2003033..d2851f46a64b 100644
--- a/arch/hexagon/Kconfig
+++ b/arch/hexagon/Kconfig
@@ -146,26 +146,10 @@ config PAGE_SIZE_256KB
endchoice
-source "mm/Kconfig"
-
source "kernel/Kconfig.hz"
endmenu
-source "init/Kconfig"
-source "kernel/Kconfig.freezer"
-source "drivers/Kconfig"
-source "fs/Kconfig"
-
-menu "Executable File Formats"
-source "fs/Kconfig.binfmt"
-endmenu
-
-source "net/Kconfig"
-source "security/Kconfig"
-source "crypto/Kconfig"
-source "lib/Kconfig"
-
menu "Kernel hacking"
source "lib/Kconfig.debug"
endmenu
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index ff861420b8f5..6015d66fa521 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -4,10 +4,6 @@ config PGTABLE_LEVELS
range 3 4 if !IA64_PAGE_SIZE_64KB
default 3
-source "init/Kconfig"
-
-source "kernel/Kconfig.freezer"
-
menu "Processor type and features"
config IA64
@@ -370,8 +366,6 @@ config FORCE_CPEI_RETARGET
source "kernel/Kconfig.preempt"
-source "mm/Kconfig"
-
config ARCH_SELECT_MEMORY_MODEL
def_bool y
@@ -532,8 +526,6 @@ config CRASH_DUMP
source "drivers/firmware/Kconfig"
-source "fs/Kconfig.binfmt"
-
endmenu
menu "Power management and ACPI options"
@@ -574,10 +566,6 @@ endmenu
endif
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
source "arch/ia64/hp/sim/Kconfig"
config MSPEC
@@ -589,12 +577,4 @@ config MSPEC
operations support (formerly known as fetchop), say Y here,
otherwise say N.
-source "fs/Kconfig"
-
source "arch/ia64/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 785612b576f7..f76fb7bb371f 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -75,10 +75,6 @@ config PGTABLE_LEVELS
default 2 if SUN3 || COLDFIRE
default 3
-source "init/Kconfig"
-
-source "kernel/Kconfig.freezer"
-
config MMU
bool "MMU-based Paged Memory Management Support"
default y
@@ -137,14 +133,6 @@ if COLDFIRE
source "kernel/Kconfig.preempt"
endif
-source "mm/Kconfig"
-
-endmenu
-
-menu "Executable file formats"
-
-source "fs/Kconfig.binfmt"
-
endmenu
if !MMU
@@ -158,18 +146,6 @@ config PM
endmenu
endif
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
source "arch/m68k/Kconfig.devices"
-source "fs/Kconfig"
-
source "arch/m68k/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index d14782100088..3a427ae82ede 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -85,10 +85,6 @@ config STACKTRACE_SUPPORT
config LOCKDEP_SUPPORT
def_bool y
-source "init/Kconfig"
-
-source "kernel/Kconfig.freezer"
-
source "arch/microblaze/Kconfig.platform"
menu "Processor type and features"
@@ -268,14 +264,6 @@ config MICROBLAZE_64K_PAGES
endchoice
-source "mm/Kconfig"
-
-endmenu
-
-menu "Executable file formats"
-
-source "fs/Kconfig.binfmt"
-
endmenu
menu "Bus Options"
@@ -300,16 +288,4 @@ source "drivers/pci/Kconfig"
endmenu
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "fs/Kconfig"
-
source "arch/microblaze/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 08c10c518f83..f586a3259f7f 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2641,8 +2641,6 @@ config HW_PERF_EVENTS
Enable hardware performance counter support for perf events. If
disabled, perf events will use software events only.
-source "mm/Kconfig"
-
config SMP
bool "Multi-Processing support"
depends on SYS_SUPPORTS_SMP
@@ -2994,10 +2992,6 @@ config PGTABLE_LEVELS
default 3 if 64BIT && !PAGE_SIZE_64KB
default 2
-source "init/Kconfig"
-
-source "kernel/Kconfig.freezer"
-
menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
config HW_HAS_EISA
@@ -3127,10 +3121,6 @@ source "drivers/rapidio/Kconfig"
endmenu
-menu "Executable file formats"
-
-source "fs/Kconfig.binfmt"
-
config TRAD_SIGNALS
bool
@@ -3176,8 +3166,6 @@ config BINFMT_ELF32
default y if MIPS32_O32 || MIPS32_N32
select ELFCORE
-endmenu
-
menu "Power management options"
config ARCH_HIBERNATION_POSSIBLE
@@ -3205,20 +3193,8 @@ source "drivers/cpuidle/Kconfig"
endmenu
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
source "drivers/firmware/Kconfig"
-source "fs/Kconfig"
-
source "arch/mips/Kconfig.debug"
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
-
source "arch/mips/kvm/Kconfig"
diff --git a/arch/nds32/Kconfig b/arch/nds32/Kconfig
index 6aed974276d8..a9c6d25a14f0 100644
--- a/arch/nds32/Kconfig
+++ b/arch/nds32/Kconfig
@@ -71,8 +71,6 @@ config FIX_EARLYCON_MEM
config PGTABLE_LEVELS
default 2
-source "init/Kconfig"
-
menu "System Type"
source "arch/nds32/Kconfig.cpu"
config NR_CPUS
@@ -91,23 +89,9 @@ endmenu
menu "Kernel Features"
source "kernel/Kconfig.preempt"
-source "kernel/Kconfig.freezer"
-source "mm/Kconfig"
source "kernel/Kconfig.hz"
endmenu
-menu "Executable file formats"
-source "fs/Kconfig.binfmt"
-endmenu
-
-source "net/Kconfig"
-source "drivers/Kconfig"
-source "fs/Kconfig"
-
menu "Kernel hacking"
source "lib/Kconfig.debug"
endmenu
-
-source "security/Kconfig"
-source "crypto/Kconfig"
-source "lib/Kconfig"
diff --git a/arch/nios2/Kconfig b/arch/nios2/Kconfig
index 3d4ec88f1db1..5e139f2e6b7b 100644
--- a/arch/nios2/Kconfig
+++ b/arch/nios2/Kconfig
@@ -47,18 +47,12 @@ config RWSEM_GENERIC_SPINLOCK
config TRACE_IRQFLAGS_SUPPORT
def_bool n
-source "init/Kconfig"
-
menu "Kernel features"
source "kernel/Kconfig.preempt"
-source "kernel/Kconfig.freezer"
-
source "kernel/Kconfig.hz"
-source "mm/Kconfig"
-
config FORCE_MAX_ZONEORDER
int "Maximum zone order"
range 9 20
@@ -196,22 +190,4 @@ config NIOS2_IO_REGION_BASE
endmenu
-menu "Executable file formats"
-
-source "fs/Kconfig.binfmt"
-
-endmenu
-
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "fs/Kconfig"
-
source "arch/nios2/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
index 9ecad05bfc73..eb9f503c8972 100644
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -72,10 +72,6 @@ config LOCKDEP_SUPPORT
config MULTI_IRQ_HANDLER
def_bool y
-source "init/Kconfig"
-
-source "kernel/Kconfig.freezer"
-
menu "Processor type and features"
choice
@@ -148,7 +144,6 @@ config SMP
source kernel/Kconfig.hz
source kernel/Kconfig.preempt
-source "mm/Kconfig"
config OPENRISC_NO_SPR_SR_DSX
bool "use SPR_SR_DSX software emulation" if OR1K_1200
@@ -207,24 +202,6 @@ endmenu
endmenu
-menu "Executable file formats"
-
-source "fs/Kconfig.binfmt"
-
-endmenu
-
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "fs/Kconfig"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
-
menu "Kernel hacking"
source "lib/Kconfig.debug"
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 17526bebcbd2..64b832a19bdf 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -129,10 +129,6 @@ config PGTABLE_LEVELS
config SYS_SUPPORTS_HUGETLBFS
def_bool y if PA20
-source "init/Kconfig"
-
-source "kernel/Kconfig.freezer"
-
menu "Processor type and features"
@@ -329,7 +325,6 @@ config NODES_SHIFT
source "kernel/Kconfig.preempt"
source "kernel/Kconfig.hz"
-source "mm/Kconfig"
config COMPAT
def_bool y
@@ -354,19 +349,6 @@ endmenu
source "drivers/parisc/Kconfig"
-
-menu "Executable file formats"
-
-source "fs/Kconfig.binfmt"
-
-endmenu
-
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "fs/Kconfig"
-
source "arch/parisc/Kconfig.debug"
config SECCOMP
@@ -384,9 +366,3 @@ config SECCOMP
defined by each seccomp mode.
If unsure, say Y. Only embedded should say N here.
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 9f2b75fe2c2d..131132f161e5 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -383,10 +383,6 @@ config PGTABLE_LEVELS
default 3 if PPC_64K_PAGES && !PPC_BOOK3S_64
default 4
-source "init/Kconfig"
-
-source "kernel/Kconfig.freezer"
-
source "arch/powerpc/sysdev/Kconfig"
source "arch/powerpc/platforms/Kconfig"
@@ -398,7 +394,6 @@ config HIGHMEM
source kernel/Kconfig.hz
source kernel/Kconfig.preempt
-source "fs/Kconfig.binfmt"
config HUGETLB_PAGE_SIZE_VARIABLE
bool
@@ -641,8 +636,6 @@ config ILLEGAL_POINTER_VALUE
default 0x5deadbeef0000000 if PPC64
default 0
-source "mm/Kconfig"
-
config ARCH_MEMORY_PROBE
def_bool y
depends on MEMORY_HOTPLUG
@@ -1201,20 +1194,8 @@ endif
config ARCH_RANDOM
def_bool n
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "fs/Kconfig"
-
-source "lib/Kconfig"
-
source "arch/powerpc/Kconfig.debug"
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
config PPC_LIB_RHEAP
bool
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 4764fdeb4f1f..082486cddf31 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -212,8 +212,6 @@ endmenu
menu "Kernel type"
-source "mm/Kconfig"
-
source "kernel/Kconfig.preempt"
source "kernel/Kconfig.hz"
@@ -242,28 +240,12 @@ source "drivers/pci/Kconfig"
endmenu
-source "init/Kconfig"
-
-source "kernel/Kconfig.freezer"
-
-menu "Executable file formats"
-
-source "fs/Kconfig.binfmt"
-
-endmenu
-
menu "Power management options"
source kernel/power/Kconfig
endmenu
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "fs/Kconfig"
-
menu "Kernel hacking"
config CMDLINE_BOOL
@@ -308,9 +290,3 @@ source "lib/Kconfig.debug"
config CMDLINE_BOOL
bool
endmenu
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index e44bb2b2873e..a94667712337 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -184,10 +184,6 @@ config PGTABLE_LEVELS
int
default 5
-source "init/Kconfig"
-
-source "kernel/Kconfig.freezer"
-
source "kernel/livepatch/Kconfig"
menu "Processor type and features"
@@ -627,8 +623,6 @@ config FORCE_MAX_ZONEORDER
int
default "9"
-source "mm/Kconfig"
-
config MAX_PHYSMEM_BITS
int "Maximum size of supported physical memory in bits (42-53)"
range 42 53
@@ -798,10 +792,6 @@ config CRASH_DUMP
endmenu
-menu "Executable file formats / Emulations"
-
-source "fs/Kconfig.binfmt"
-
config SECCOMP
def_bool y
prompt "Enable seccomp to safely compute untrusted bytecode"
@@ -819,8 +809,6 @@ config SECCOMP
If unsure, say Y.
-endmenu
-
menu "Power Management"
config ARCH_HIBERNATION_POSSIBLE
@@ -830,30 +818,18 @@ source "kernel/power/Kconfig"
endmenu
-source "net/Kconfig"
-
config PCMCIA
def_bool n
config CCW
def_bool y
-source "drivers/Kconfig"
-
config HAVE_PNETID
tristate
default (SMC || CCWGROUP)
-source "fs/Kconfig"
-
source "arch/s390/Kconfig.debug"
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
-
menu "Virtualization"
config PFAULT
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index dd4f3d3e644f..7ab7b148181b 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -168,10 +168,6 @@ config PGTABLE_LEVELS
default 3 if X2TLB
default 2
-source "init/Kconfig"
-
-source "kernel/Kconfig.freezer"
-
menu "System type"
#
@@ -553,8 +549,6 @@ endchoice
endif
-source "arch/sh/mm/Kconfig"
-
source "arch/sh/Kconfig.cpu"
source "arch/sh/boards/Kconfig"
@@ -882,12 +876,6 @@ source "drivers/pcmcia/Kconfig"
endmenu
-menu "Executable file formats"
-
-source "fs/Kconfig.binfmt"
-
-endmenu
-
menu "Power management options (EXPERIMENTAL)"
source "kernel/power/Kconfig"
@@ -896,16 +884,4 @@ source "drivers/cpuidle/Kconfig"
endmenu
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "fs/Kconfig"
-
source "arch/sh/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 0f535debf802..8a1e44d2e112 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -155,10 +155,6 @@ config PGTABLE_LEVELS
config ARCH_SUPPORTS_UPROBES
def_bool y if SPARC64
-source "init/Kconfig"
-
-source "kernel/Kconfig.freezer"
-
menu "Processor type and features"
config SMP
@@ -331,8 +327,6 @@ config FORCE_MAX_ZONEORDER
This config option is actually maximum order plus one. For example,
a value of 13 means that the largest free memory block is 2^12 pages.
-source "mm/Kconfig"
-
if SPARC64
source "kernel/power/Kconfig"
endif
@@ -556,10 +550,6 @@ config SPARC64_PCI_MSI
endmenu
-menu "Executable file formats"
-
-source "fs/Kconfig.binfmt"
-
config COMPAT
bool
depends on SPARC64
@@ -574,20 +564,6 @@ config SYSVIPC_COMPAT
depends on COMPAT && SYSVIPC
default y
-endmenu
-
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
source "drivers/sbus/char/Kconfig"
-source "fs/Kconfig"
-
source "arch/sparc/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
index fc17718fbe0e..97a3a5f59b15 100644
--- a/arch/um/Kconfig
+++ b/arch/um/Kconfig
@@ -75,8 +75,6 @@ config STATIC_LINK
Additionally, this option enables using higher memory spaces (up to
2.75G) for UML.
-source "mm/Kconfig"
-
config LD_SCRIPT_STATIC
bool
default y
@@ -88,8 +86,6 @@ config LD_SCRIPT_DYN
depends on !LD_SCRIPT_STATIC
select MODULE_REL_CRCS if MODVERSIONS
-source "fs/Kconfig.binfmt"
-
config HOSTFS
tristate "Host filesystem"
help
@@ -190,22 +186,6 @@ config SECCOMP
endmenu
-source "init/Kconfig"
-
-source "kernel/Kconfig.freezer"
-
source "arch/um/drivers/Kconfig"
-source "drivers/Kconfig"
-
-source "net/Kconfig"
-
-source "fs/Kconfig"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
-
source "arch/um/Kconfig.debug"
diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
index 03f991e44288..7fa7e61eb19f 100644
--- a/arch/unicore32/Kconfig
+++ b/arch/unicore32/Kconfig
@@ -63,10 +63,6 @@ config ARCH_MAY_HAVE_PC_FDC
config ZONE_DMA
def_bool y
-source "init/Kconfig"
-
-source "kernel/Kconfig.freezer"
-
menu "System Type"
config MMU
@@ -143,8 +139,6 @@ source "kernel/Kconfig.preempt"
source "kernel/Kconfig.hz"
-source "mm/Kconfig"
-
config LEDS
def_bool y
depends on GPIOLIB
@@ -181,12 +175,6 @@ config CMDLINE_FORCE
endmenu
-menu "Userspace binary formats"
-
-source "fs/Kconfig.binfmt"
-
-endmenu
-
menu "Power management options"
source "kernel/power/Kconfig"
@@ -201,8 +189,6 @@ config ARCH_HIBERNATION_POSSIBLE
endmenu
-source "net/Kconfig"
-
if ARCH_PUV3
config PUV3_GPIO
@@ -237,14 +223,4 @@ endif
endif
-source "drivers/Kconfig"
-
-source "fs/Kconfig"
-
source "arch/unicore32/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index f1dbb4ee19d7..6faefd1c9f13 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -345,8 +345,6 @@ config PGTABLE_LEVELS
default 3 if X86_PAE
default 2
-source "init/Kconfig"
-
config CC_HAS_SANE_STACKPROTECTOR
bool
default $(success,$(srctree)/scripts/gcc-x86_64-has-stack-protector.sh $(CC)) if 64BIT
@@ -355,8 +353,6 @@ config CC_HAS_SANE_STACKPROTECTOR
We have to make sure stack protector is unconditionally disabled if
the compiler produces broken code.
-source "kernel/Kconfig.freezer"
-
menu "Processor type and features"
config ZONE_DMA
@@ -1638,8 +1634,6 @@ config ILLEGAL_POINTER_VALUE
default 0 if X86_32
default 0xdead000000000000 if X86_64
-source "mm/Kconfig"
-
config X86_PMEM_LEGACY_DEVICE
bool
@@ -2865,9 +2859,7 @@ config X86_SYSFB
endmenu
-menu "Executable file formats / Emulations"
-
-source "fs/Kconfig.binfmt"
+menu "Binary Emulations"
config IA32_EMULATION
bool "IA32 Emulation"
@@ -2937,20 +2929,8 @@ config X86_DMA_REMAP
config HAVE_GENERIC_GUP
def_bool y
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
source "drivers/firmware/Kconfig"
-source "fs/Kconfig"
-
source "arch/x86/Kconfig.debug"
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
source "arch/x86/kvm/Kconfig"
-
-source "lib/Kconfig"
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index d575e8701955..d8bac8be3a33 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -60,9 +60,6 @@ config HZ
int
default 100
-source "init/Kconfig"
-source "kernel/Kconfig.freezer"
-
config LOCKDEP_SUPPORT
def_bool y
@@ -491,8 +488,6 @@ config SIMDISK1_FILENAME
Another simulated disk in a host file for a buildroot-independent
storage.
-source "mm/Kconfig"
-
config FORCE_MAX_ZONEORDER
int "Maximum zone order"
default "11"
@@ -567,30 +562,10 @@ config XTFPGA_LCD_8BIT_ACCESS
endmenu
-menu "Executable file formats"
-
-source "fs/Kconfig.binfmt"
-
-endmenu
-
menu "Power management options"
source "kernel/power/Kconfig"
endmenu
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "fs/Kconfig"
-
source "arch/xtensa/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
-
-
diff --git a/init/Kconfig b/init/Kconfig
index 041f3a022122..58cfa22a1c9c 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1714,10 +1714,10 @@ config PROFILING
config TRACEPOINTS
bool
-source "arch/Kconfig"
-
endmenu # General setup
+source "arch/Kconfig"
+
config RT_MUTEXES
bool
--
2.18.0
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 5/9] Kconfig: consolidate the "Kernel hacking" menu
2018-07-08 15:19 include architecture Kconfig files from top-level Kconfig v2 Christoph Hellwig
` (3 preceding siblings ...)
2018-07-08 15:19 ` [PATCH 4/9] kconfig: include common Kconfig files from top-level Kconfig Christoph Hellwig
@ 2018-07-08 15:20 ` Christoph Hellwig
2018-07-08 16:34 ` Randy Dunlap
2018-07-08 15:20 ` [PATCH 6/9] kconfig: include kernel/Kconfig.preempt from init/Kconfig Christoph Hellwig
` (4 subsequent siblings)
9 siblings, 1 reply; 23+ messages in thread
From: Christoph Hellwig @ 2018-07-08 15:20 UTC (permalink / raw)
To: Masahiro Yamada
Cc: Randy Dunlap, Richard Weinberger, linux-kbuild, linux-um, linux-kernel
Move the source of lib/Kconfig.debug and arch/$(ARCH)/Kconfig.debug to
the top-level Kconfig. For two architectures that means moving their
arch-specific symbols in that menu into a new arch Kconfig.debug file,
and for a few more creating a dummy file so that we can include it
unconditionally.
Also move the actual 'Kernel hacking' menu to lib/Kconfig.debug, where
it belongs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
Kconfig | 2 ++
arch/alpha/Kconfig | 2 --
arch/alpha/Kconfig.debug | 5 ----
arch/arc/Kconfig | 1 -
arch/arc/Kconfig.debug | 5 ----
arch/arm/Kconfig | 2 --
arch/arm/Kconfig.debug | 5 ----
arch/arm64/Kconfig | 2 --
arch/arm64/Kconfig.debug | 5 ----
arch/c6x/Kconfig | 15 ------------
arch/c6x/Kconfig.debug | 11 +++++++++
arch/h8300/Kconfig | 6 -----
arch/h8300/Kconfig.debug | 1 +
arch/hexagon/Kconfig | 4 ----
arch/hexagon/Kconfig.debug | 1 +
arch/ia64/Kconfig | 2 --
arch/ia64/Kconfig.debug | 5 ----
arch/m68k/Kconfig | 2 --
arch/m68k/Kconfig.debug | 5 ----
arch/microblaze/Kconfig | 2 --
arch/microblaze/Kconfig.debug | 6 -----
arch/mips/Kconfig | 2 --
arch/mips/Kconfig.debug | 5 ----
arch/nds32/Kconfig | 4 ----
arch/nds32/Kconfig.debug | 1 +
arch/nios2/Kconfig | 2 --
arch/nios2/Kconfig.debug | 5 ----
arch/openrisc/Kconfig | 6 -----
arch/openrisc/Kconfig.debug | 1 +
arch/parisc/Kconfig | 2 --
arch/parisc/Kconfig.debug | 5 ----
arch/powerpc/Kconfig | 2 --
arch/powerpc/Kconfig.debug | 5 ----
arch/riscv/Kconfig | 45 -----------------------------------
arch/riscv/Kconfig.debug | 37 ++++++++++++++++++++++++++++
arch/s390/Kconfig | 2 --
arch/s390/Kconfig.debug | 5 ----
arch/sh/Kconfig | 2 --
arch/sh/Kconfig.debug | 5 ----
arch/sparc/Kconfig | 2 --
arch/sparc/Kconfig.debug | 5 ----
arch/um/Kconfig | 2 --
arch/um/Kconfig.debug | 5 ----
arch/unicore32/Kconfig | 2 --
arch/unicore32/Kconfig.debug | 5 ----
arch/x86/Kconfig | 2 --
arch/x86/Kconfig.debug | 5 ----
arch/xtensa/Kconfig | 2 --
arch/xtensa/Kconfig.debug | 5 ----
lib/Kconfig.debug | 6 +++++
50 files changed, 60 insertions(+), 206 deletions(-)
create mode 100644 arch/c6x/Kconfig.debug
create mode 100644 arch/h8300/Kconfig.debug
create mode 100644 arch/hexagon/Kconfig.debug
create mode 100644 arch/nds32/Kconfig.debug
create mode 100644 arch/openrisc/Kconfig.debug
create mode 100644 arch/riscv/Kconfig.debug
diff --git a/Kconfig b/Kconfig
index 1a5c0a5d4ea1..a5997d6c2029 100644
--- a/Kconfig
+++ b/Kconfig
@@ -30,3 +30,5 @@ source "security/Kconfig"
source "crypto/Kconfig"
source "lib/Kconfig"
+
+source "lib/Kconfig.debug"
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 50676152babd..e4334f017f8e 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -710,8 +710,6 @@ config SRM_ENV
endmenu
-source "arch/alpha/Kconfig.debug"
-
# DUMMY_CONSOLE may be defined in drivers/video/console/Kconfig
# but we also need it if VGA_HOSE is set
config DUMMY_CONSOLE
diff --git a/arch/alpha/Kconfig.debug b/arch/alpha/Kconfig.debug
index 5e93dffb818a..b88c7b641d72 100644
--- a/arch/alpha/Kconfig.debug
+++ b/arch/alpha/Kconfig.debug
@@ -1,7 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
config EARLY_PRINTK
bool
@@ -39,5 +36,3 @@ config MATHEMU
This option is required for IEEE compliant floating point arithmetic
on the Alpha. The only time you would ever not say Y is to say M in
order to debug the code. Say Y unless you know what you are doing.
-
-endmenu
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index d4a28c45c406..5aab069eba17 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -574,5 +574,4 @@ source "drivers/pci/Kconfig"
endmenu
-source "arch/arc/Kconfig.debug"
source "kernel/power/Kconfig"
diff --git a/arch/arc/Kconfig.debug b/arch/arc/Kconfig.debug
index 03da1a6b3072..45add86decd5 100644
--- a/arch/arc/Kconfig.debug
+++ b/arch/arc/Kconfig.debug
@@ -1,7 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
config 16KSTACKS
bool "Use 16Kb for kernel stacks instead of 8Kb"
@@ -11,5 +8,3 @@ config 16KSTACKS
This increases the resident kernel footprint and will cause less
threads to run on the system and also increase the pressure
on the VM subsystem for higher order allocations.
-
-endmenu
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 46ee6669204b..9aaa23c25374 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -2191,8 +2191,6 @@ endmenu
source "drivers/firmware/Kconfig"
-source "arch/arm/Kconfig.debug"
-
if CRYPTO
source "arch/arm/crypto/Kconfig"
endif
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 693f84392f1b..b48dc083d1b1 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1,7 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
config ARM_PTDUMP_CORE
def_bool n
@@ -1863,5 +1860,3 @@ config PID_IN_CONTEXTIDR
are planning to use hardware trace tools with this kernel.
source "drivers/hwtracing/coresight/Kconfig"
-
-endmenu
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index fabd797c8645..07d457ec417a 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -1321,8 +1321,6 @@ source "drivers/acpi/Kconfig"
source "arch/arm64/kvm/Kconfig"
-source "arch/arm64/Kconfig.debug"
-
if CRYPTO
source "arch/arm64/crypto/Kconfig"
endif
diff --git a/arch/arm64/Kconfig.debug b/arch/arm64/Kconfig.debug
index cc6bd559af85..69c9170bdd24 100644
--- a/arch/arm64/Kconfig.debug
+++ b/arch/arm64/Kconfig.debug
@@ -1,6 +1,3 @@
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
config ARM64_PTDUMP_CORE
def_bool n
@@ -97,5 +94,3 @@ config ARM64_RELOC_TEST
tristate "Relocation testing module"
source "drivers/hwtracing/coresight/Kconfig"
-
-endmenu
diff --git a/arch/c6x/Kconfig b/arch/c6x/Kconfig
index 441bbe089b96..904b3375331e 100644
--- a/arch/c6x/Kconfig
+++ b/arch/c6x/Kconfig
@@ -115,18 +115,3 @@ source "kernel/Kconfig.preempt"
source "kernel/Kconfig.hz"
endmenu
-
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
-
-config ACCESS_CHECK
- bool "Check the user pointer address"
- default y
- help
- Usually the pointer transfer from user space is checked to see if its
- address is in the kernel space.
-
- Say N here to disable that check to improve the performance.
-
-endmenu
diff --git a/arch/c6x/Kconfig.debug b/arch/c6x/Kconfig.debug
new file mode 100644
index 000000000000..49edf08813eb
--- /dev/null
+++ b/arch/c6x/Kconfig.debug
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config ACCESS_CHECK
+ bool "Check the user pointer address"
+ default y
+ help
+ Usually the pointer transfer from user space is checked to see if its
+ address is in the kernel space.
+
+ Say N here to disable that check to improve the performance.
+
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
index e23cd887f8f9..c16e7cf732f7 100644
--- a/arch/h8300/Kconfig
+++ b/arch/h8300/Kconfig
@@ -55,9 +55,3 @@ menu "Kernel Features"
source "kernel/Kconfig.preempt"
endmenu
-
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
-
-endmenu
diff --git a/arch/h8300/Kconfig.debug b/arch/h8300/Kconfig.debug
new file mode 100644
index 000000000000..22a162cd99e8
--- /dev/null
+++ b/arch/h8300/Kconfig.debug
@@ -0,0 +1 @@
+# dummy file, do not delete
diff --git a/arch/hexagon/Kconfig b/arch/hexagon/Kconfig
index d2851f46a64b..fcdb6d9fcecc 100644
--- a/arch/hexagon/Kconfig
+++ b/arch/hexagon/Kconfig
@@ -149,7 +149,3 @@ endchoice
source "kernel/Kconfig.hz"
endmenu
-
-menu "Kernel hacking"
-source "lib/Kconfig.debug"
-endmenu
diff --git a/arch/hexagon/Kconfig.debug b/arch/hexagon/Kconfig.debug
new file mode 100644
index 000000000000..22a162cd99e8
--- /dev/null
+++ b/arch/hexagon/Kconfig.debug
@@ -0,0 +1 @@
+# dummy file, do not delete
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 6015d66fa521..34a8d24cffea 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -576,5 +576,3 @@ config MSPEC
If you have an ia64 and you want to enable memory special
operations support (formerly known as fetchop), say Y here,
otherwise say N.
-
-source "arch/ia64/Kconfig.debug"
diff --git a/arch/ia64/Kconfig.debug b/arch/ia64/Kconfig.debug
index 677c409425df..1371efc9b005 100644
--- a/arch/ia64/Kconfig.debug
+++ b/arch/ia64/Kconfig.debug
@@ -1,7 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
choice
prompt "Physical memory granularity"
@@ -56,5 +53,3 @@ config IA64_DEBUG_IRQ
Selecting this option turns on bug checking for the IA-64 irq_save
and restore instructions. It's useful for tracking down spinlock
problems, but slow! If you're unsure, select N.
-
-endmenu
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index f76fb7bb371f..cf41ad45513f 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -147,5 +147,3 @@ endmenu
endif
source "arch/m68k/Kconfig.devices"
-
-source "arch/m68k/Kconfig.debug"
diff --git a/arch/m68k/Kconfig.debug b/arch/m68k/Kconfig.debug
index 04690b179a6e..f43643111eaf 100644
--- a/arch/m68k/Kconfig.debug
+++ b/arch/m68k/Kconfig.debug
@@ -1,7 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
config BOOTPARAM
bool 'Compiled-in Kernel Boot Parameter'
@@ -51,5 +48,3 @@ config BDM_DISABLE
Disable the ColdFire CPU's BDM signals.
endif
-
-endmenu
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 3a427ae82ede..ee7bb1002e27 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -287,5 +287,3 @@ config PCI_XILINX
source "drivers/pci/Kconfig"
endmenu
-
-source "arch/microblaze/Kconfig.debug"
diff --git a/arch/microblaze/Kconfig.debug b/arch/microblaze/Kconfig.debug
index 93a737c8d1a6..dc2e3c45e8a2 100644
--- a/arch/microblaze/Kconfig.debug
+++ b/arch/microblaze/Kconfig.debug
@@ -1,11 +1,5 @@
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/kconfig-language.txt.
-menu "Kernel hacking"
-
config TRACE_IRQFLAGS_SUPPORT
def_bool y
-
-source "lib/Kconfig.debug"
-
-endmenu
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index f586a3259f7f..ab02824c3976 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -3195,6 +3195,4 @@ endmenu
source "drivers/firmware/Kconfig"
-source "arch/mips/Kconfig.debug"
-
source "arch/mips/kvm/Kconfig"
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index 0749c3724543..0c86b2a2adfc 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -1,12 +1,9 @@
# SPDX-License-Identifier: GPL-2.0
-menu "Kernel hacking"
config TRACE_IRQFLAGS_SUPPORT
bool
default y
-source "lib/Kconfig.debug"
-
config EARLY_PRINTK
bool "Early printk" if EXPERT
depends on SYS_HAS_EARLY_PRINTK
@@ -155,5 +152,3 @@ config MIPS_CPS_NS16550_SHIFT
adjacent ns16550 registers in the system.
endif # MIPS_CPS_NS16550_BOOL
-
-endmenu
diff --git a/arch/nds32/Kconfig b/arch/nds32/Kconfig
index a9c6d25a14f0..c03d0e5a591b 100644
--- a/arch/nds32/Kconfig
+++ b/arch/nds32/Kconfig
@@ -91,7 +91,3 @@ menu "Kernel Features"
source "kernel/Kconfig.preempt"
source "kernel/Kconfig.hz"
endmenu
-
-menu "Kernel hacking"
-source "lib/Kconfig.debug"
-endmenu
diff --git a/arch/nds32/Kconfig.debug b/arch/nds32/Kconfig.debug
new file mode 100644
index 000000000000..22a162cd99e8
--- /dev/null
+++ b/arch/nds32/Kconfig.debug
@@ -0,0 +1 @@
+# dummy file, do not delete
diff --git a/arch/nios2/Kconfig b/arch/nios2/Kconfig
index 5e139f2e6b7b..2c52ca71f4df 100644
--- a/arch/nios2/Kconfig
+++ b/arch/nios2/Kconfig
@@ -189,5 +189,3 @@ config NIOS2_IO_REGION_BASE
default "0xe0000000"
endmenu
-
-source "arch/nios2/Kconfig.debug"
diff --git a/arch/nios2/Kconfig.debug b/arch/nios2/Kconfig.debug
index edfeef049a51..7a49f0d28d14 100644
--- a/arch/nios2/Kconfig.debug
+++ b/arch/nios2/Kconfig.debug
@@ -1,11 +1,8 @@
# SPDX-License-Identifier: GPL-2.0
-menu "Kernel hacking"
config TRACE_IRQFLAGS_SUPPORT
def_bool y
-source "lib/Kconfig.debug"
-
config DEBUG_STACK_USAGE
bool "Enable stack utilization instrumentation"
depends on DEBUG_KERNEL
@@ -24,5 +21,3 @@ config EARLY_PRINTK
This is useful for kernel debugging when your machine crashes very
early before the console code is initialized.
You should normally say N here, unless you want to debug such a crash.
-
-endmenu
diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
index eb9f503c8972..c52cecd94d62 100644
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -201,9 +201,3 @@ config OPENRISC_ESR_EXCEPTION_BUG_CHECK
endmenu
endmenu
-
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
-
-endmenu
diff --git a/arch/openrisc/Kconfig.debug b/arch/openrisc/Kconfig.debug
new file mode 100644
index 000000000000..22a162cd99e8
--- /dev/null
+++ b/arch/openrisc/Kconfig.debug
@@ -0,0 +1 @@
+# dummy file, do not delete
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 64b832a19bdf..d1dd56ea297b 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -349,8 +349,6 @@ endmenu
source "drivers/parisc/Kconfig"
-source "arch/parisc/Kconfig.debug"
-
config SECCOMP
def_bool y
prompt "Enable seccomp to safely compute untrusted bytecode"
diff --git a/arch/parisc/Kconfig.debug b/arch/parisc/Kconfig.debug
index fb3507f9b14a..1478ded0e247 100644
--- a/arch/parisc/Kconfig.debug
+++ b/arch/parisc/Kconfig.debug
@@ -1,9 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
config TRACE_IRQFLAGS_SUPPORT
def_bool y
-
-endmenu
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 131132f161e5..c55e61302d57 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -1194,8 +1194,6 @@ endif
config ARCH_RANDOM
def_bool n
-source "arch/powerpc/Kconfig.debug"
-
config PPC_LIB_RHEAP
bool
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index c45424c64e19..fd63cd914a74 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -1,7 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
config PPC_DISABLE_WERROR
bool "Don't build arch/powerpc code with -Werror"
@@ -379,5 +376,3 @@ config PPC_FAST_ENDIAN_SWITCH
depends on DEBUG_KERNEL && PPC_BOOK3S_64
help
If you're unsure what this is, say N.
-
-endmenu
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 082486cddf31..73c0e16793fa 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -245,48 +245,3 @@ menu "Power management options"
source kernel/power/Kconfig
endmenu
-
-menu "Kernel hacking"
-
-config CMDLINE_BOOL
- bool "Built-in kernel command line"
- help
- For most platforms, it is firmware or second stage bootloader
- that by default specifies the kernel command line options.
- However, it might be necessary or advantageous to either override
- the default kernel command line or add a few extra options to it.
- For such cases, this option allows hardcoding command line options
- directly into the kernel.
-
- For that, choose 'Y' here and fill in the extra boot parameters
- in CONFIG_CMDLINE.
-
- The built-in options will be concatenated to the default command
- line if CMDLINE_FORCE is set to 'N'. Otherwise, the default
- command line will be ignored and replaced by the built-in string.
-
-config CMDLINE
- string "Built-in kernel command string"
- depends on CMDLINE_BOOL
- default ""
- help
- Supply command-line options at build time by entering them here.
-
-config CMDLINE_FORCE
- bool "Built-in command line overrides bootloader arguments"
- depends on CMDLINE_BOOL
- help
- Set this option to 'Y' to have the kernel ignore the bootloader
- or firmware command line. Instead, the built-in command line
- will be used exclusively.
-
- If you don't know what to do here, say N.
-
-config EARLY_PRINTK
- def_bool y
-
-source "lib/Kconfig.debug"
-
-config CMDLINE_BOOL
- bool
-endmenu
diff --git a/arch/riscv/Kconfig.debug b/arch/riscv/Kconfig.debug
new file mode 100644
index 000000000000..3224ff6ecf6e
--- /dev/null
+++ b/arch/riscv/Kconfig.debug
@@ -0,0 +1,37 @@
+
+config CMDLINE_BOOL
+ bool "Built-in kernel command line"
+ help
+ For most platforms, it is firmware or second stage bootloader
+ that by default specifies the kernel command line options.
+ However, it might be necessary or advantageous to either override
+ the default kernel command line or add a few extra options to it.
+ For such cases, this option allows hardcoding command line options
+ directly into the kernel.
+
+ For that, choose 'Y' here and fill in the extra boot parameters
+ in CONFIG_CMDLINE.
+
+ The built-in options will be concatenated to the default command
+ line if CMDLINE_FORCE is set to 'N'. Otherwise, the default
+ command line will be ignored and replaced by the built-in string.
+
+config CMDLINE
+ string "Built-in kernel command string"
+ depends on CMDLINE_BOOL
+ default ""
+ help
+ Supply command-line options at build time by entering them here.
+
+config CMDLINE_FORCE
+ bool "Built-in command line overrides bootloader arguments"
+ depends on CMDLINE_BOOL
+ help
+ Set this option to 'Y' to have the kernel ignore the bootloader
+ or firmware command line. Instead, the built-in command line
+ will be used exclusively.
+
+ If you don't know what to do here, say N.
+
+config EARLY_PRINTK
+ def_bool y
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index a94667712337..ac8925766d0a 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -828,8 +828,6 @@ config HAVE_PNETID
tristate
default (SMC || CCWGROUP)
-source "arch/s390/Kconfig.debug"
-
menu "Virtualization"
config PFAULT
diff --git a/arch/s390/Kconfig.debug b/arch/s390/Kconfig.debug
index 2cfdfbf8d320..190527560b2c 100644
--- a/arch/s390/Kconfig.debug
+++ b/arch/s390/Kconfig.debug
@@ -1,11 +1,8 @@
# SPDX-License-Identifier: GPL-2.0
-menu "Kernel hacking"
config TRACE_IRQFLAGS_SUPPORT
def_bool y
-source "lib/Kconfig.debug"
-
config S390_PTDUMP
bool "Export kernel pagetable layout to userspace via debugfs"
depends on DEBUG_KERNEL
@@ -20,5 +17,3 @@ config S390_PTDUMP
config EARLY_PRINTK
def_bool y
-
-endmenu
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 7ab7b148181b..b665c54fdda6 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -883,5 +883,3 @@ source "kernel/power/Kconfig"
source "drivers/cpuidle/Kconfig"
endmenu
-
-source "arch/sh/Kconfig.debug"
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index d0767672640d..010b6c33bbba 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -1,11 +1,8 @@
# SPDX-License-Identifier: GPL-2.0
-menu "Kernel hacking"
config TRACE_IRQFLAGS_SUPPORT
def_bool y
-source "lib/Kconfig.debug"
-
config SH_STANDARD_BIOS
bool "Use LinuxSH standard BIOS"
depends on SUPERH32
@@ -88,5 +85,3 @@ config MCOUNT
def_bool y
depends on SUPERH32
depends on STACK_DEBUG || FUNCTION_TRACER
-
-endmenu
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 8a1e44d2e112..622695e8fa44 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -565,5 +565,3 @@ config SYSVIPC_COMPAT
default y
source "drivers/sbus/char/Kconfig"
-
-source "arch/sparc/Kconfig.debug"
diff --git a/arch/sparc/Kconfig.debug b/arch/sparc/Kconfig.debug
index 4aef29a11925..50a918d496c8 100644
--- a/arch/sparc/Kconfig.debug
+++ b/arch/sparc/Kconfig.debug
@@ -1,12 +1,9 @@
# SPDX-License-Identifier: GPL-2.0
-menu "Kernel hacking"
config TRACE_IRQFLAGS_SUPPORT
bool
default y
-source "lib/Kconfig.debug"
-
config DEBUG_DCFLUSH
bool "D-cache flush debugging"
depends on SPARC64 && DEBUG_KERNEL
@@ -21,5 +18,3 @@ config FRAME_POINTER
bool
depends on MCOUNT
default y
-
-endmenu
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
index 97a3a5f59b15..2372b74711e1 100644
--- a/arch/um/Kconfig
+++ b/arch/um/Kconfig
@@ -187,5 +187,3 @@ config SECCOMP
endmenu
source "arch/um/drivers/Kconfig"
-
-source "arch/um/Kconfig.debug"
diff --git a/arch/um/Kconfig.debug b/arch/um/Kconfig.debug
index 967d3109689f..2014597605ea 100644
--- a/arch/um/Kconfig.debug
+++ b/arch/um/Kconfig.debug
@@ -1,7 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
config GPROF
bool "Enable gprof support"
@@ -37,5 +34,3 @@ config EARLY_PRINTK
This is useful for kernel debugging when your machine crashes very
early before the console code is initialized.
-
-endmenu
diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
index 7fa7e61eb19f..6bfaa4a910e1 100644
--- a/arch/unicore32/Kconfig
+++ b/arch/unicore32/Kconfig
@@ -222,5 +222,3 @@ endmenu
endif
endif
-
-source "arch/unicore32/Kconfig.debug"
diff --git a/arch/unicore32/Kconfig.debug b/arch/unicore32/Kconfig.debug
index de8dae3abc0a..ca0ff97657ef 100644
--- a/arch/unicore32/Kconfig.debug
+++ b/arch/unicore32/Kconfig.debug
@@ -1,7 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
config EARLY_PRINTK
def_bool DEBUG_OCD
@@ -30,5 +27,3 @@ config DEBUG_OCD
help
Say Y here if you want the debug print routines to direct their
output to the UniCore On-Chip-Debugger channel using CP #1.
-
-endmenu
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 6faefd1c9f13..41d28b430fef 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2931,6 +2931,4 @@ config HAVE_GENERIC_GUP
source "drivers/firmware/Kconfig"
-source "arch/x86/Kconfig.debug"
-
source "arch/x86/kvm/Kconfig"
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index c6dd1d980081..7d68f0c7cfb1 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -1,11 +1,8 @@
# SPDX-License-Identifier: GPL-2.0
-menu "Kernel hacking"
config TRACE_IRQFLAGS_SUPPORT
def_bool y
-source "lib/Kconfig.debug"
-
config EARLY_PRINTK_USB
bool
@@ -410,5 +407,3 @@ endchoice
config FRAME_POINTER
depends on !UNWINDER_ORC && !UNWINDER_GUESS
bool
-
-endmenu
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index d8bac8be3a33..aae0e1800be7 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -567,5 +567,3 @@ menu "Power management options"
source "kernel/power/Kconfig"
endmenu
-
-source "arch/xtensa/Kconfig.debug"
diff --git a/arch/xtensa/Kconfig.debug b/arch/xtensa/Kconfig.debug
index f64c14adadb3..39de98e20018 100644
--- a/arch/xtensa/Kconfig.debug
+++ b/arch/xtensa/Kconfig.debug
@@ -1,7 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
config DEBUG_TLB_SANITY
bool "Debug TLB sanity"
@@ -34,5 +31,3 @@ config S32C1I_SELFTEST
It is easy to make wrong hardware configuration, this test should catch it early.
Say 'N' on stable hardware.
-
-endmenu
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 8838d1158d19..26d3ff7e3cf4 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1,3 +1,5 @@
+menu "Kernel hacking"
+
menu "printk and dmesg options"
config PRINTK_TIME
@@ -2034,3 +2036,7 @@ config IO_STRICT_DEVMEM
if the driver using a given range cannot be disabled.
If in doubt, say Y.
+
+source "arch/$(SRCARCH)/Kconfig.debug"
+
+endmenu # Kernel hacking
--
2.18.0
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 6/9] kconfig: include kernel/Kconfig.preempt from init/Kconfig
2018-07-08 15:19 include architecture Kconfig files from top-level Kconfig v2 Christoph Hellwig
` (4 preceding siblings ...)
2018-07-08 15:20 ` [PATCH 5/9] Kconfig: consolidate the "Kernel hacking" menu Christoph Hellwig
@ 2018-07-08 15:20 ` Christoph Hellwig
2018-07-08 16:30 ` Randy Dunlap
2018-07-08 15:20 ` [PATCH 7/9] arch/Kconfig: use a menu to reduce clutter Christoph Hellwig
` (3 subsequent siblings)
9 siblings, 1 reply; 23+ messages in thread
From: Christoph Hellwig @ 2018-07-08 15:20 UTC (permalink / raw)
To: Masahiro Yamada
Cc: Randy Dunlap, Richard Weinberger, linux-kbuild, linux-um, linux-kernel
Almost all architectures include it. Add a ARCH_NO_PREEMPT symbol to
disable preempt support for alpha, hexagon, non-coldfire m68k and
user mode Linux.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
arch/Kconfig | 3 +++
arch/alpha/Kconfig | 1 +
arch/arc/Kconfig | 2 --
arch/arm/Kconfig | 2 --
arch/arm64/Kconfig | 1 -
arch/c6x/Kconfig | 2 --
arch/h8300/Kconfig | 6 ------
arch/hexagon/Kconfig | 1 +
arch/ia64/Kconfig | 2 --
arch/m68k/Kconfig | 5 +----
arch/microblaze/Kconfig | 2 --
arch/mips/Kconfig | 2 --
arch/nds32/Kconfig | 1 -
arch/nios2/Kconfig | 2 --
arch/openrisc/Kconfig | 1 -
arch/parisc/Kconfig | 1 -
arch/powerpc/Kconfig | 1 -
arch/riscv/Kconfig | 2 --
arch/s390/Kconfig | 2 --
arch/sh/Kconfig | 2 --
arch/sparc/Kconfig | 2 --
arch/um/Kconfig | 1 +
arch/unicore32/Kconfig | 2 --
arch/x86/Kconfig | 2 --
arch/xtensa/Kconfig | 2 --
init/Kconfig | 1 +
kernel/Kconfig.preempt | 2 ++
27 files changed, 10 insertions(+), 43 deletions(-)
diff --git a/arch/Kconfig b/arch/Kconfig
index 09a561a70168..cddd0faae4cb 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -881,6 +881,9 @@ config COMPAT_32BIT_TIME
config ARCH_NO_COHERENT_DMA_MMAP
bool
+config ARCH_NO_PREEMPT
+ bool
+
config CPU_NO_EFFICIENT_FFS
def_bool n
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index e4334f017f8e..5b4f88363453 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -4,6 +4,7 @@ config ALPHA
default y
select ARCH_MIGHT_HAVE_PC_PARPORT
select ARCH_MIGHT_HAVE_PC_SERIO
+ select ARCH_NO_PREEMPT
select ARCH_USE_CMPXCHG_LOCKREF
select HAVE_AOUT
select HAVE_IDE
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 5aab069eba17..639ab1bed835 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -545,8 +545,6 @@ config ARC_BUILTIN_DTB_NAME
Set the name of the DTB to embed in the vmlinux binary
Leaving it blank selects the minimal "skeleton" dtb
-source "kernel/Kconfig.preempt"
-
endmenu # "ARC Architecture Configuration"
config FORCE_MAX_ZONEORDER
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9aaa23c25374..1b1c21519039 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1481,8 +1481,6 @@ config ARCH_NR_GPIO
If unsure, leave the default value.
-source kernel/Kconfig.preempt
-
config HZ_FIXED
int
default 200 if ARCH_EBSA110
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 07d457ec417a..daf59d363dd3 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -752,7 +752,6 @@ config HOLES_IN_ZONE
def_bool y
depends on NUMA
-source kernel/Kconfig.preempt
source kernel/Kconfig.hz
config ARCH_SUPPORTS_DEBUG_PAGEALLOC
diff --git a/arch/c6x/Kconfig b/arch/c6x/Kconfig
index 904b3375331e..a641b0bf1611 100644
--- a/arch/c6x/Kconfig
+++ b/arch/c6x/Kconfig
@@ -110,8 +110,6 @@ config KERNEL_RAM_BASE_ADDRESS
default 0xe0000000 if SOC_TMS320C6472
default 0x80000000
-source "kernel/Kconfig.preempt"
-
source "kernel/Kconfig.hz"
endmenu
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
index c16e7cf732f7..5e89d40be8cd 100644
--- a/arch/h8300/Kconfig
+++ b/arch/h8300/Kconfig
@@ -49,9 +49,3 @@ config NR_CPUS
default 1
source "arch/h8300/Kconfig.cpu"
-
-menu "Kernel Features"
-
-source "kernel/Kconfig.preempt"
-
-endmenu
diff --git a/arch/hexagon/Kconfig b/arch/hexagon/Kconfig
index fcdb6d9fcecc..89a4b22f34d9 100644
--- a/arch/hexagon/Kconfig
+++ b/arch/hexagon/Kconfig
@@ -4,6 +4,7 @@ comment "Linux Kernel Configuration for Hexagon"
config HEXAGON
def_bool y
+ select ARCH_NO_PREEMPT
select HAVE_OPROFILE
# Other pending projects/to-do items.
# select HAVE_REGS_AND_STACK_ACCESS_API
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 34a8d24cffea..86bd377bc7c0 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -364,8 +364,6 @@ config FORCE_CPEI_RETARGET
This option it useful to enable this feature on older BIOS's as well.
You can also enable this by using boot command line option force_cpei=1.
-source "kernel/Kconfig.preempt"
-
config ARCH_SELECT_MEMORY_MODEL
def_bool y
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index cf41ad45513f..3e47f8df6504 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -4,6 +4,7 @@ config M68K
default y
select ARCH_MIGHT_HAVE_PC_PARPORT if ISA
select ARCH_NO_COHERENT_DMA_MMAP if !MMU
+ select ARCH_NO_PREEMPT if !COLDFIRE
select HAVE_IDE
select HAVE_AOUT if MMU
select HAVE_DEBUG_BUGVERBOSE
@@ -129,10 +130,6 @@ endmenu
menu "Kernel Features"
-if COLDFIRE
-source "kernel/Kconfig.preempt"
-endif
-
endmenu
if !MMU
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index ee7bb1002e27..3e7258a21b47 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -89,8 +89,6 @@ source "arch/microblaze/Kconfig.platform"
menu "Processor type and features"
-source "kernel/Kconfig.preempt"
-
source "kernel/Kconfig.hz"
config MMU
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index ab02824c3976..06a633eb9777 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2818,8 +2818,6 @@ config HZ
config SCHED_HRTICK
def_bool HIGH_RES_TIMERS
-source "kernel/Kconfig.preempt"
-
config KEXEC
bool "Kexec system call"
select KEXEC_CORE
diff --git a/arch/nds32/Kconfig b/arch/nds32/Kconfig
index c03d0e5a591b..541f16adfb06 100644
--- a/arch/nds32/Kconfig
+++ b/arch/nds32/Kconfig
@@ -88,6 +88,5 @@ config NDS32_BUILTIN_DTB
endmenu
menu "Kernel Features"
-source "kernel/Kconfig.preempt"
source "kernel/Kconfig.hz"
endmenu
diff --git a/arch/nios2/Kconfig b/arch/nios2/Kconfig
index 2c52ca71f4df..c5c2d99064c4 100644
--- a/arch/nios2/Kconfig
+++ b/arch/nios2/Kconfig
@@ -49,8 +49,6 @@ config TRACE_IRQFLAGS_SUPPORT
menu "Kernel features"
-source "kernel/Kconfig.preempt"
-
source "kernel/Kconfig.hz"
config FORCE_MAX_ZONEORDER
diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
index c52cecd94d62..42e3a0f2afab 100644
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -143,7 +143,6 @@ config SMP
If you don't know what to do here, say N.
source kernel/Kconfig.hz
-source kernel/Kconfig.preempt
config OPENRISC_NO_SPR_SR_DSX
bool "use SPR_SR_DSX software emulation" if OR1K_1200
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index d1dd56ea297b..89496aa318da 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -323,7 +323,6 @@ config NODES_SHIFT
default "3"
depends on NEED_MULTIPLE_NODES
-source "kernel/Kconfig.preempt"
source "kernel/Kconfig.hz"
config COMPAT
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index c55e61302d57..1c10ff0406f2 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -393,7 +393,6 @@ config HIGHMEM
depends on PPC32
source kernel/Kconfig.hz
-source kernel/Kconfig.preempt
config HUGETLB_PAGE_SIZE_VARIABLE
bool
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 73c0e16793fa..a344980287a5 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -212,8 +212,6 @@ endmenu
menu "Kernel type"
-source "kernel/Kconfig.preempt"
-
source "kernel/Kconfig.hz"
endmenu
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index ac8925766d0a..8441bd8f7d70 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -511,8 +511,6 @@ config SCHED_TOPOLOGY
making when dealing with machines that have multi-threading,
multiple cores or multiple books.
-source kernel/Kconfig.preempt
-
source kernel/Kconfig.hz
config KEXEC
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index b665c54fdda6..9f49e5c3278e 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -707,8 +707,6 @@ config HOTPLUG_CPU
Say Y here to experiment with turning CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu.
-source "kernel/Kconfig.preempt"
-
config GUSA
def_bool y
depends on !SMP && SUPERH32
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 622695e8fa44..2d58c26bff9a 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -349,8 +349,6 @@ config SCHED_MC
making when dealing with multi-core CPU chips at a cost of slightly
increased overhead in some places. If unsure say N here.
-source "kernel/Kconfig.preempt"
-
config CMDLINE_BOOL
bool "Default bootloader kernel arguments"
depends on SPARC64
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
index 2372b74711e1..dd4b67131105 100644
--- a/arch/um/Kconfig
+++ b/arch/um/Kconfig
@@ -6,6 +6,7 @@ config UML
bool
default y
select ARCH_HAS_KCOV
+ select ARCH_NO_PREEMPT
select HAVE_ARCH_AUDITSYSCALL
select HAVE_ARCH_SECCOMP_FILTER
select HAVE_UID16
diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
index 6bfaa4a910e1..60eae744d8fd 100644
--- a/arch/unicore32/Kconfig
+++ b/arch/unicore32/Kconfig
@@ -135,8 +135,6 @@ endmenu
menu "Kernel Features"
-source "kernel/Kconfig.preempt"
-
source "kernel/Kconfig.hz"
config LEDS
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 41d28b430fef..98fd04cfa995 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1039,8 +1039,6 @@ config SCHED_MC_PRIO
If unsure say Y here.
-source "kernel/Kconfig.preempt"
-
config UP_LATE_INIT
def_bool y
depends on !SMP && X86_LOCAL_APIC
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index aae0e1800be7..801491e98890 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -173,8 +173,6 @@ config XTENSA_UNALIGNED_USER
Say Y here to enable unaligned memory access in user space.
-source "kernel/Kconfig.preempt"
-
config HAVE_SMP
bool "System Supports SMP (MX)"
depends on XTENSA_VARIANT_CUSTOM
diff --git a/init/Kconfig b/init/Kconfig
index 58cfa22a1c9c..d0a57a95a280 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -319,6 +319,7 @@ config AUDIT_TREE
source "kernel/irq/Kconfig"
source "kernel/time/Kconfig"
+source "kernel/Kconfig.preempt"
menu "CPU/Task time and stats accounting"
diff --git a/kernel/Kconfig.preempt b/kernel/Kconfig.preempt
index 3f9c97419f02..cd1655122ec0 100644
--- a/kernel/Kconfig.preempt
+++ b/kernel/Kconfig.preempt
@@ -18,6 +18,7 @@ config PREEMPT_NONE
config PREEMPT_VOLUNTARY
bool "Voluntary Kernel Preemption (Desktop)"
+ depends on !ARCH_NO_PREEMPT
help
This option reduces the latency of the kernel by adding more
"explicit preemption points" to the kernel code. These new
@@ -35,6 +36,7 @@ config PREEMPT_VOLUNTARY
config PREEMPT
bool "Preemptible Kernel (Low-Latency Desktop)"
+ depends on !ARCH_NO_PREEMPT
select PREEMPT_COUNT
select UNINLINE_SPIN_UNLOCK if !ARCH_INLINE_SPIN_UNLOCK
help
--
2.18.0
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 7/9] arch/Kconfig: use a menu to reduce clutter
2018-07-08 15:19 include architecture Kconfig files from top-level Kconfig v2 Christoph Hellwig
` (5 preceding siblings ...)
2018-07-08 15:20 ` [PATCH 6/9] kconfig: include kernel/Kconfig.preempt from init/Kconfig Christoph Hellwig
@ 2018-07-08 15:20 ` Christoph Hellwig
2018-07-08 15:20 ` [PATCH 8/9] kconfig: move the "Executable file formats" menu to fs/Kconfig.binfmt Christoph Hellwig
` (2 subsequent siblings)
9 siblings, 0 replies; 23+ messages in thread
From: Christoph Hellwig @ 2018-07-08 15:20 UTC (permalink / raw)
To: Masahiro Yamada
Cc: Randy Dunlap, Richard Weinberger, linux-kbuild, linux-um, linux-kernel
From: Randy Dunlap <rdunlap@infradead.org>
Put everything in arch/Kconfig into a General options menu
so that they don't clutter up the main/major/primary list of
menu options.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
arch/Kconfig | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/Kconfig b/arch/Kconfig
index cddd0faae4cb..6cf1b17a8df2 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -9,6 +9,8 @@
#
source "arch/$(SRCARCH)/Kconfig"
+menu "General architecture-dependent options"
+
config CRASH_CORE
bool
@@ -981,3 +983,5 @@ config REFCOUNT_FULL
security flaw exploits.
source "kernel/gcov/Kconfig"
+
+endmenu
--
2.18.0
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 8/9] kconfig: move the "Executable file formats" menu to fs/Kconfig.binfmt
2018-07-08 15:19 include architecture Kconfig files from top-level Kconfig v2 Christoph Hellwig
` (6 preceding siblings ...)
2018-07-08 15:20 ` [PATCH 7/9] arch/Kconfig: use a menu to reduce clutter Christoph Hellwig
@ 2018-07-08 15:20 ` Christoph Hellwig
2018-07-08 15:20 ` [PATCH 9/9] kconfig: add a Memory Management options" menu Christoph Hellwig
2018-07-23 10:46 ` include architecture Kconfig files from top-level Kconfig v2 Richard Weinberger
9 siblings, 0 replies; 23+ messages in thread
From: Christoph Hellwig @ 2018-07-08 15:20 UTC (permalink / raw)
To: Masahiro Yamada
Cc: Randy Dunlap, Richard Weinberger, linux-kbuild, linux-um, linux-kernel
No need to have this in the top-level Kconfig.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
---
Kconfig | 2 --
fs/Kconfig.binfmt | 5 +++++
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/Kconfig b/Kconfig
index a5997d6c2029..48a80beab685 100644
--- a/Kconfig
+++ b/Kconfig
@@ -13,9 +13,7 @@ source "init/Kconfig"
source "kernel/Kconfig.freezer"
-menu "Executable file formats"
source "fs/Kconfig.binfmt"
-endmenu
source "mm/Kconfig"
diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt
index 56df483de619..b795f8da81f3 100644
--- a/fs/Kconfig.binfmt
+++ b/fs/Kconfig.binfmt
@@ -1,3 +1,6 @@
+
+menu "Executable file formats"
+
config BINFMT_ELF
bool "Kernel support for ELF binaries"
depends on MMU
@@ -187,3 +190,5 @@ config COREDUMP
This option enables support for performing core dumps. You almost
certainly want to say Y here. Not necessary on systems that never
need debugging or only ever run flawless code.
+
+endmenu
--
2.18.0
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 9/9] kconfig: add a Memory Management options" menu
2018-07-08 15:19 include architecture Kconfig files from top-level Kconfig v2 Christoph Hellwig
` (7 preceding siblings ...)
2018-07-08 15:20 ` [PATCH 8/9] kconfig: move the "Executable file formats" menu to fs/Kconfig.binfmt Christoph Hellwig
@ 2018-07-08 15:20 ` Christoph Hellwig
2018-07-23 10:46 ` include architecture Kconfig files from top-level Kconfig v2 Richard Weinberger
9 siblings, 0 replies; 23+ messages in thread
From: Christoph Hellwig @ 2018-07-08 15:20 UTC (permalink / raw)
To: Masahiro Yamada
Cc: Randy Dunlap, Richard Weinberger, linux-kbuild, linux-um, linux-kernel
This moves all the options under a proper menu.
Based on a patch from Randy Dunlap.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
---
mm/Kconfig | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/mm/Kconfig b/mm/Kconfig
index ce95491abd6a..9ae1b6a8e30f 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -1,3 +1,6 @@
+
+menu "Memory Management options"
+
config SELECT_MEMORY_MODEL
def_bool y
depends on ARCH_SELECT_MEMORY_MODEL
@@ -762,3 +765,5 @@ config GUP_BENCHMARK
config ARCH_HAS_PTE_SPECIAL
bool
+
+endmenu
--
2.18.0
^ permalink raw reply related [flat|nested] 23+ messages in thread
* Re: [PATCH 6/9] kconfig: include kernel/Kconfig.preempt from init/Kconfig
2018-07-08 15:20 ` [PATCH 6/9] kconfig: include kernel/Kconfig.preempt from init/Kconfig Christoph Hellwig
@ 2018-07-08 16:30 ` Randy Dunlap
0 siblings, 0 replies; 23+ messages in thread
From: Randy Dunlap @ 2018-07-08 16:30 UTC (permalink / raw)
To: Christoph Hellwig, Masahiro Yamada
Cc: Richard Weinberger, linux-kbuild, linux-um, linux-kernel
On 07/08/2018 08:20 AM, Christoph Hellwig wrote:
> Almost all architectures include it. Add a ARCH_NO_PREEMPT symbol to
> disable preempt support for alpha, hexagon, non-coldfire m68k and
> user mode Linux.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
> ---
> arch/Kconfig | 3 +++
> arch/alpha/Kconfig | 1 +
> arch/arc/Kconfig | 2 --
> arch/arm/Kconfig | 2 --
> arch/arm64/Kconfig | 1 -
> arch/c6x/Kconfig | 2 --
> arch/h8300/Kconfig | 6 ------
> arch/hexagon/Kconfig | 1 +
> arch/ia64/Kconfig | 2 --
> arch/m68k/Kconfig | 5 +----
> arch/microblaze/Kconfig | 2 --
> arch/mips/Kconfig | 2 --
> arch/nds32/Kconfig | 1 -
> arch/nios2/Kconfig | 2 --
> arch/openrisc/Kconfig | 1 -
> arch/parisc/Kconfig | 1 -
> arch/powerpc/Kconfig | 1 -
> arch/riscv/Kconfig | 2 --
> arch/s390/Kconfig | 2 --
> arch/sh/Kconfig | 2 --
> arch/sparc/Kconfig | 2 --
> arch/um/Kconfig | 1 +
> arch/unicore32/Kconfig | 2 --
> arch/x86/Kconfig | 2 --
> arch/xtensa/Kconfig | 2 --
> init/Kconfig | 1 +
> kernel/Kconfig.preempt | 2 ++
> 27 files changed, 10 insertions(+), 43 deletions(-)
--
~Randy
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 5/9] Kconfig: consolidate the "Kernel hacking" menu
2018-07-08 15:20 ` [PATCH 5/9] Kconfig: consolidate the "Kernel hacking" menu Christoph Hellwig
@ 2018-07-08 16:34 ` Randy Dunlap
0 siblings, 0 replies; 23+ messages in thread
From: Randy Dunlap @ 2018-07-08 16:34 UTC (permalink / raw)
To: Christoph Hellwig, Masahiro Yamada
Cc: Richard Weinberger, linux-kbuild, linux-um, linux-kernel
On 07/08/2018 08:20 AM, Christoph Hellwig wrote:
> Move the source of lib/Kconfig.debug and arch/$(ARCH)/Kconfig.debug to
> the top-level Kconfig. For two architectures that means moving their
> arch-specific symbols in that menu into a new arch Kconfig.debug file,
> and for a few more creating a dummy file so that we can include it
> unconditionally.
>
> Also move the actual 'Kernel hacking' menu to lib/Kconfig.debug, where
> it belongs.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
> ---
> Kconfig | 2 ++
> arch/alpha/Kconfig | 2 --
> arch/alpha/Kconfig.debug | 5 ----
> arch/arc/Kconfig | 1 -
> arch/arc/Kconfig.debug | 5 ----
> arch/arm/Kconfig | 2 --
> arch/arm/Kconfig.debug | 5 ----
> arch/arm64/Kconfig | 2 --
> arch/arm64/Kconfig.debug | 5 ----
> arch/c6x/Kconfig | 15 ------------
> arch/c6x/Kconfig.debug | 11 +++++++++
> arch/h8300/Kconfig | 6 -----
> arch/h8300/Kconfig.debug | 1 +
> arch/hexagon/Kconfig | 4 ----
> arch/hexagon/Kconfig.debug | 1 +
> arch/ia64/Kconfig | 2 --
> arch/ia64/Kconfig.debug | 5 ----
> arch/m68k/Kconfig | 2 --
> arch/m68k/Kconfig.debug | 5 ----
> arch/microblaze/Kconfig | 2 --
> arch/microblaze/Kconfig.debug | 6 -----
> arch/mips/Kconfig | 2 --
> arch/mips/Kconfig.debug | 5 ----
> arch/nds32/Kconfig | 4 ----
> arch/nds32/Kconfig.debug | 1 +
> arch/nios2/Kconfig | 2 --
> arch/nios2/Kconfig.debug | 5 ----
> arch/openrisc/Kconfig | 6 -----
> arch/openrisc/Kconfig.debug | 1 +
> arch/parisc/Kconfig | 2 --
> arch/parisc/Kconfig.debug | 5 ----
> arch/powerpc/Kconfig | 2 --
> arch/powerpc/Kconfig.debug | 5 ----
> arch/riscv/Kconfig | 45 -----------------------------------
> arch/riscv/Kconfig.debug | 37 ++++++++++++++++++++++++++++
> arch/s390/Kconfig | 2 --
> arch/s390/Kconfig.debug | 5 ----
> arch/sh/Kconfig | 2 --
> arch/sh/Kconfig.debug | 5 ----
> arch/sparc/Kconfig | 2 --
> arch/sparc/Kconfig.debug | 5 ----
> arch/um/Kconfig | 2 --
> arch/um/Kconfig.debug | 5 ----
> arch/unicore32/Kconfig | 2 --
> arch/unicore32/Kconfig.debug | 5 ----
> arch/x86/Kconfig | 2 --
> arch/x86/Kconfig.debug | 5 ----
> arch/xtensa/Kconfig | 2 --
> arch/xtensa/Kconfig.debug | 5 ----
> lib/Kconfig.debug | 6 +++++
> 50 files changed, 60 insertions(+), 206 deletions(-)
> create mode 100644 arch/c6x/Kconfig.debug
> create mode 100644 arch/h8300/Kconfig.debug
> create mode 100644 arch/hexagon/Kconfig.debug
> create mode 100644 arch/nds32/Kconfig.debug
> create mode 100644 arch/openrisc/Kconfig.debug
> create mode 100644 arch/riscv/Kconfig.debug
--
~Randy
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 4/9] kconfig: include common Kconfig files from top-level Kconfig
2018-07-08 15:19 ` [PATCH 4/9] kconfig: include common Kconfig files from top-level Kconfig Christoph Hellwig
@ 2018-07-11 12:21 ` Masahiro Yamada
2018-07-17 6:33 ` Randy Dunlap
2018-07-18 7:06 ` Randy Dunlap
0 siblings, 2 replies; 23+ messages in thread
From: Masahiro Yamada @ 2018-07-11 12:21 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Randy Dunlap, Richard Weinberger, Linux Kbuild mailing list,
linux-um, Linux Kernel Mailing List
2018-07-09 0:19 GMT+09:00 Christoph Hellwig <hch@lst.de>:
> Instead of duplicating the source statements in every architecture just
> do it once in the toplevel Kconfig file.
>
> Note that with this the inclusion of arch/$(SRCARCH/Kconfig moves out of
> the top-level Kconfig into arch/Kconfig so that don't violate ordering
> constraits while keeping a sensible menu structure.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
> index dd4f3d3e644f..7ab7b148181b 100644
> --- a/arch/sh/Kconfig
> +++ b/arch/sh/Kconfig
> @@ -168,10 +168,6 @@ config PGTABLE_LEVELS
> default 3 if X2TLB
> default 2
>
> -source "init/Kconfig"
> -
> -source "kernel/Kconfig.freezer"
> -
> menu "System type"
>
> #
> @@ -553,8 +549,6 @@ endchoice
>
> endif
>
> -source "arch/sh/mm/Kconfig"
I noticed at least sh is broken
because "arch/sh/mm/Kconfig" is no longer included by anyone.
I am not doing further tests.
Please test *ALL* architectures.
If possible, matrix tests (arch, config-target), where
arch = arm, arm64, ...
config-target = allyesconfig, allnoconfig, alldefconfig, ...
Note:
scripts/diffconf is helpful.
--
Best Regards
Masahiro Yamada
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 4/9] kconfig: include common Kconfig files from top-level Kconfig
2018-07-11 12:21 ` Masahiro Yamada
@ 2018-07-17 6:33 ` Randy Dunlap
2018-07-17 6:42 ` Randy Dunlap
2018-07-17 12:59 ` Christoph Hellwig
2018-07-18 7:06 ` Randy Dunlap
1 sibling, 2 replies; 23+ messages in thread
From: Randy Dunlap @ 2018-07-17 6:33 UTC (permalink / raw)
To: Masahiro Yamada, Christoph Hellwig
Cc: Richard Weinberger, Linux Kbuild mailing list, linux-um,
Linux Kernel Mailing List
On 07/11/2018 05:21 AM, Masahiro Yamada wrote:
> 2018-07-09 0:19 GMT+09:00 Christoph Hellwig <hch@lst.de>:
>> Instead of duplicating the source statements in every architecture just
>> do it once in the toplevel Kconfig file.
>>
>> Note that with this the inclusion of arch/$(SRCARCH/Kconfig moves out of
>> the top-level Kconfig into arch/Kconfig so that don't violate ordering
>> constraits while keeping a sensible menu structure.
>>
>> Signed-off-by: Christoph Hellwig <hch@lst.de>
>
>
>> diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
>> index dd4f3d3e644f..7ab7b148181b 100644
>> --- a/arch/sh/Kconfig
>> +++ b/arch/sh/Kconfig
>> @@ -168,10 +168,6 @@ config PGTABLE_LEVELS
>> default 3 if X2TLB
>> default 2
>>
>> -source "init/Kconfig"
>> -
>> -source "kernel/Kconfig.freezer"
>> -
>> menu "System type"
>>
>> #
>> @@ -553,8 +549,6 @@ endchoice
>>
>> endif
>>
>> -source "arch/sh/mm/Kconfig"
>
>
> I noticed at least sh is broken
> because "arch/sh/mm/Kconfig" is no longer included by anyone.
>
> I am not doing further tests.
>
Hi,
Thanks for noticing that.
I have tested all $ARCH (except um) with "allmodconfig" and so far, arch/sh/
is the only one that has a problem.
>
> Please test *ALL* architectures.
>
> If possible, matrix tests (arch, config-target), where
> arch = arm, arm64, ...
> config-target = allyesconfig, allnoconfig, alldefconfig, ...
>
>
> Note:
> scripts/diffconf is helpful.
>
--
~Randy
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 4/9] kconfig: include common Kconfig files from top-level Kconfig
2018-07-17 6:33 ` Randy Dunlap
@ 2018-07-17 6:42 ` Randy Dunlap
2018-07-17 6:44 ` Randy Dunlap
2018-07-17 13:00 ` Christoph Hellwig
2018-07-17 12:59 ` Christoph Hellwig
1 sibling, 2 replies; 23+ messages in thread
From: Randy Dunlap @ 2018-07-17 6:42 UTC (permalink / raw)
To: Masahiro Yamada, Christoph Hellwig
Cc: Richard Weinberger, Linux Kbuild mailing list, linux-um,
Linux Kernel Mailing List
On 07/16/2018 11:33 PM, Randy Dunlap wrote:
> On 07/11/2018 05:21 AM, Masahiro Yamada wrote:
>> 2018-07-09 0:19 GMT+09:00 Christoph Hellwig <hch@lst.de>:
>>> Instead of duplicating the source statements in every architecture just
>>> do it once in the toplevel Kconfig file.
>>>
>>> Note that with this the inclusion of arch/$(SRCARCH/Kconfig moves out of
>>> the top-level Kconfig into arch/Kconfig so that don't violate ordering
>>> constraits while keeping a sensible menu structure.
>>>
>>> Signed-off-by: Christoph Hellwig <hch@lst.de>
>>
>>
>>> diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
>>> index dd4f3d3e644f..7ab7b148181b 100644
>>> --- a/arch/sh/Kconfig
>>> +++ b/arch/sh/Kconfig
>>> @@ -168,10 +168,6 @@ config PGTABLE_LEVELS
>>> default 3 if X2TLB
>>> default 2
>>>
>>> -source "init/Kconfig"
>>> -
>>> -source "kernel/Kconfig.freezer"
>>> -
>>> menu "System type"
>>>
>>> #
>>> @@ -553,8 +549,6 @@ endchoice
>>>
>>> endif
>>>
>>> -source "arch/sh/mm/Kconfig"
>>
>>
>> I noticed at least sh is broken
>> because "arch/sh/mm/Kconfig" is no longer included by anyone.
>>
>> I am not doing further tests.
>>
>
> Hi,
>
> Thanks for noticing that.
>
> I have tested all $ARCH (except um) with "allmodconfig" and so far, arch/sh/
> is the only one that has a problem.
>
Well, there are 3 $ARCH-es that have an arch/$ARCH/mm/Kconfig file:
arm, sh, and unicore32.
We can either merge those into arch/$ARCH/Kconfig or we can source
arch/$ARCH/mm/Kconfig for all $ARCH (where most of these files will be
empty).
Christoph, thoughts/ideas?
>
>>
>> Please test *ALL* architectures.
>>
>> If possible, matrix tests (arch, config-target), where
>> arch = arm, arm64, ...
>> config-target = allyesconfig, allnoconfig, alldefconfig, ...
>>
>>
>> Note:
>> scripts/diffconf is helpful.
>>
>
>
--
~Randy
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 4/9] kconfig: include common Kconfig files from top-level Kconfig
2018-07-17 6:42 ` Randy Dunlap
@ 2018-07-17 6:44 ` Randy Dunlap
2018-07-17 6:55 ` Randy Dunlap
2018-07-17 13:00 ` Christoph Hellwig
1 sibling, 1 reply; 23+ messages in thread
From: Randy Dunlap @ 2018-07-17 6:44 UTC (permalink / raw)
To: Masahiro Yamada, Christoph Hellwig
Cc: Richard Weinberger, Linux Kbuild mailing list, linux-um,
Linux Kernel Mailing List
On 07/16/2018 11:42 PM, Randy Dunlap wrote:
> On 07/16/2018 11:33 PM, Randy Dunlap wrote:
>> On 07/11/2018 05:21 AM, Masahiro Yamada wrote:
>>> 2018-07-09 0:19 GMT+09:00 Christoph Hellwig <hch@lst.de>:
>>>> Instead of duplicating the source statements in every architecture just
>>>> do it once in the toplevel Kconfig file.
>>>>
>>>> Note that with this the inclusion of arch/$(SRCARCH/Kconfig moves out of
>>>> the top-level Kconfig into arch/Kconfig so that don't violate ordering
>>>> constraits while keeping a sensible menu structure.
>>>>
>>>> Signed-off-by: Christoph Hellwig <hch@lst.de>
>>>
>>>
>>>> diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
>>>> index dd4f3d3e644f..7ab7b148181b 100644
>>>> --- a/arch/sh/Kconfig
>>>> +++ b/arch/sh/Kconfig
>>>> @@ -168,10 +168,6 @@ config PGTABLE_LEVELS
>>>> default 3 if X2TLB
>>>> default 2
>>>>
>>>> -source "init/Kconfig"
>>>> -
>>>> -source "kernel/Kconfig.freezer"
>>>> -
>>>> menu "System type"
>>>>
>>>> #
>>>> @@ -553,8 +549,6 @@ endchoice
>>>>
>>>> endif
>>>>
>>>> -source "arch/sh/mm/Kconfig"
>>>
>>>
>>> I noticed at least sh is broken
>>> because "arch/sh/mm/Kconfig" is no longer included by anyone.
>>>
>>> I am not doing further tests.
>>>
>>
>> Hi,
>>
>> Thanks for noticing that.
>>
>> I have tested all $ARCH (except um) with "allmodconfig" and so far, arch/sh/
>> is the only one that has a problem.
>>
>
> Well, there are 3 $ARCH-es that have an arch/$ARCH/mm/Kconfig file:
> arm, sh, and unicore32.
>
> We can either merge those into arch/$ARCH/Kconfig or we can source
> arch/$ARCH/mm/Kconfig for all $ARCH (where most of these files will be
> empty).
>
> Christoph, thoughts/ideas?
>
The first option (merge into arch/$ARCH/Kconfig) is not a good option.
Some of these mm/Kconfig files are Large, so the second option is the only
one that makes sense to me.
>
>>
>>>
>>> Please test *ALL* architectures.
>>>
>>> If possible, matrix tests (arch, config-target), where
>>> arch = arm, arm64, ...
>>> config-target = allyesconfig, allnoconfig, alldefconfig, ...
>>>
>>>
>>> Note:
>>> scripts/diffconf is helpful.
>>>
>>
>>
>
>
--
~Randy
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 4/9] kconfig: include common Kconfig files from top-level Kconfig
2018-07-17 6:44 ` Randy Dunlap
@ 2018-07-17 6:55 ` Randy Dunlap
0 siblings, 0 replies; 23+ messages in thread
From: Randy Dunlap @ 2018-07-17 6:55 UTC (permalink / raw)
To: Masahiro Yamada, Christoph Hellwig
Cc: Richard Weinberger, Linux Kbuild mailing list, linux-um,
Linux Kernel Mailing List
On 07/16/2018 11:44 PM, Randy Dunlap wrote:
> On 07/16/2018 11:42 PM, Randy Dunlap wrote:
>> On 07/16/2018 11:33 PM, Randy Dunlap wrote:
>>> On 07/11/2018 05:21 AM, Masahiro Yamada wrote:
>>>> 2018-07-09 0:19 GMT+09:00 Christoph Hellwig <hch@lst.de>:
>>>>> Instead of duplicating the source statements in every architecture just
>>>>> do it once in the toplevel Kconfig file.
>>>>>
>>>>> Note that with this the inclusion of arch/$(SRCARCH/Kconfig moves out of
>>>>> the top-level Kconfig into arch/Kconfig so that don't violate ordering
>>>>> constraits while keeping a sensible menu structure.
>>>>>
>>>>> Signed-off-by: Christoph Hellwig <hch@lst.de>
>>>>
>>>>
>>>>> diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
>>>>> index dd4f3d3e644f..7ab7b148181b 100644
>>>>> --- a/arch/sh/Kconfig
>>>>> +++ b/arch/sh/Kconfig
>>>>> @@ -168,10 +168,6 @@ config PGTABLE_LEVELS
>>>>> default 3 if X2TLB
>>>>> default 2
>>>>>
>>>>> -source "init/Kconfig"
>>>>> -
>>>>> -source "kernel/Kconfig.freezer"
>>>>> -
>>>>> menu "System type"
>>>>>
>>>>> #
>>>>> @@ -553,8 +549,6 @@ endchoice
>>>>>
>>>>> endif
>>>>>
>>>>> -source "arch/sh/mm/Kconfig"
>>>>
>>>>
>>>> I noticed at least sh is broken
>>>> because "arch/sh/mm/Kconfig" is no longer included by anyone.
>>>>
>>>> I am not doing further tests.
>>>>
>>>
>>> Hi,
>>>
>>> Thanks for noticing that.
>>>
>>> I have tested all $ARCH (except um) with "allmodconfig" and so far, arch/sh/
>>> is the only one that has a problem.
>>>
>>
>> Well, there are 3 $ARCH-es that have an arch/$ARCH/mm/Kconfig file:
>> arm, sh, and unicore32.
>>
>> We can either merge those into arch/$ARCH/Kconfig or we can source
>> arch/$ARCH/mm/Kconfig for all $ARCH (where most of these files will be
>> empty).
>>
>> Christoph, thoughts/ideas?
>>
>
> The first option (merge into arch/$ARCH/Kconfig) is not a good option.
> Some of these mm/Kconfig files are Large, so the second option is the only
> one that makes sense to me.
>
All that *should* be needed is to add
source arch/sh/mm/Kconfig into arch/sh/Kconfig (as is done in arm and unicore32),
but that causes lots of .config diffs (as seen by scripts/diffconfig).
and I can't work on this any more tonight. :)
>>>> Please test *ALL* architectures.
>>>>
>>>> If possible, matrix tests (arch, config-target), where
>>>> arch = arm, arm64, ...
>>>> config-target = allyesconfig, allnoconfig, alldefconfig, ...
>>>>
>>>>
>>>> Note:
>>>> scripts/diffconf is helpful.
--
~Randy
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 4/9] kconfig: include common Kconfig files from top-level Kconfig
2018-07-17 6:33 ` Randy Dunlap
2018-07-17 6:42 ` Randy Dunlap
@ 2018-07-17 12:59 ` Christoph Hellwig
1 sibling, 0 replies; 23+ messages in thread
From: Christoph Hellwig @ 2018-07-17 12:59 UTC (permalink / raw)
To: Randy Dunlap
Cc: Masahiro Yamada, Christoph Hellwig, Richard Weinberger,
Linux Kbuild mailing list, linux-um, Linux Kernel Mailing List
On Mon, Jul 16, 2018 at 11:33:38PM -0700, Randy Dunlap wrote:
> Thanks for noticing that.
>
> I have tested all $ARCH (except um) with "allmodconfig" and so far, arch/sh/
> is the only one that has a problem.
I'm a little busy right now, I'll got back to fix sh and retest in a few
days hopefully.
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 4/9] kconfig: include common Kconfig files from top-level Kconfig
2018-07-17 6:42 ` Randy Dunlap
2018-07-17 6:44 ` Randy Dunlap
@ 2018-07-17 13:00 ` Christoph Hellwig
1 sibling, 0 replies; 23+ messages in thread
From: Christoph Hellwig @ 2018-07-17 13:00 UTC (permalink / raw)
To: Randy Dunlap
Cc: Masahiro Yamada, Christoph Hellwig, Richard Weinberger,
Linux Kbuild mailing list, linux-um, Linux Kernel Mailing List
On Mon, Jul 16, 2018 at 11:42:54PM -0700, Randy Dunlap wrote:
> Well, there are 3 $ARCH-es that have an arch/$ARCH/mm/Kconfig file:
> arm, sh, and unicore32.
>
> We can either merge those into arch/$ARCH/Kconfig or we can source
> arch/$ARCH/mm/Kconfig for all $ARCH (where most of these files will be
> empty).
>
> Christoph, thoughts/ideas?
I'd say lets keep them for now, not good reason to change any of
this stuff.
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 4/9] kconfig: include common Kconfig files from top-level Kconfig
2018-07-11 12:21 ` Masahiro Yamada
2018-07-17 6:33 ` Randy Dunlap
@ 2018-07-18 7:06 ` Randy Dunlap
2018-07-19 13:11 ` Christoph Hellwig
1 sibling, 1 reply; 23+ messages in thread
From: Randy Dunlap @ 2018-07-18 7:06 UTC (permalink / raw)
To: Masahiro Yamada, Christoph Hellwig
Cc: Richard Weinberger, Linux Kbuild mailing list, linux-um,
Linux Kernel Mailing List
On 07/11/2018 05:21 AM, Masahiro Yamada wrote:
> 2018-07-09 0:19 GMT+09:00 Christoph Hellwig <hch@lst.de>:
>> Instead of duplicating the source statements in every architecture just
>> do it once in the toplevel Kconfig file.
>>
>> Note that with this the inclusion of arch/$(SRCARCH/Kconfig moves out of
>> the top-level Kconfig into arch/Kconfig so that don't violate ordering
>> constraits while keeping a sensible menu structure.
>>
>> Signed-off-by: Christoph Hellwig <hch@lst.de>
>
>
>> diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
>> index dd4f3d3e644f..7ab7b148181b 100644
>> --- a/arch/sh/Kconfig
>> +++ b/arch/sh/Kconfig
>> @@ -168,10 +168,6 @@ config PGTABLE_LEVELS
>> default 3 if X2TLB
>> default 2
>>
>> -source "init/Kconfig"
>> -
>> -source "kernel/Kconfig.freezer"
>> -
>> menu "System type"
>>
>> #
>> @@ -553,8 +549,6 @@ endchoice
>>
>> endif
>>
>> -source "arch/sh/mm/Kconfig"
>
>
> I noticed at least sh is broken
> because "arch/sh/mm/Kconfig" is no longer included by anyone.
>
> I am not doing further tests.
>
>
> Please test *ALL* architectures.
>
> If possible, matrix tests (arch, config-target), where
> arch = arm, arm64, ...
> config-target = allyesconfig, allnoconfig, alldefconfig, ...
>
>
> Note:
> scripts/diffconf is helpful.
For defconfig:
All $ARCH look equivalent except for microblaze and nios2.
For those, the config SWAP in init/Kconfig (line 221) comes before (and
hence takes precedence) over arch/$(SRCARCH)/Kconfig settings, which is
def_bool n for both microblaze and nios2.
--
~Randy
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 4/9] kconfig: include common Kconfig files from top-level Kconfig
2018-07-18 7:06 ` Randy Dunlap
@ 2018-07-19 13:11 ` Christoph Hellwig
2018-07-20 19:57 ` Dirk Gouders
0 siblings, 1 reply; 23+ messages in thread
From: Christoph Hellwig @ 2018-07-19 13:11 UTC (permalink / raw)
To: Randy Dunlap
Cc: Masahiro Yamada, Christoph Hellwig, Richard Weinberger,
Linux Kbuild mailing list, linux-um, Linux Kernel Mailing List
On Wed, Jul 18, 2018 at 12:06:26AM -0700, Randy Dunlap wrote:
> All $ARCH look equivalent except for microblaze and nios2.
> For those, the config SWAP in init/Kconfig (line 221) comes before (and
> hence takes precedence) over arch/$(SRCARCH)/Kconfig settings, which is
> def_bool n for both microblaze and nios2.
Both of those are NOMMU architectures, so the default SWAP
decaration should do the right thing.
I wish the kconfig tools could warn about duplicate symbols, as they
are basically always bogus or at least very problematic.
I've update the kconfig-cleanup branch in git with the fixes, but
I didn't have time to do anything but a trivial x86 test yet.
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 4/9] kconfig: include common Kconfig files from top-level Kconfig
2018-07-19 13:11 ` Christoph Hellwig
@ 2018-07-20 19:57 ` Dirk Gouders
0 siblings, 0 replies; 23+ messages in thread
From: Dirk Gouders @ 2018-07-20 19:57 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Randy Dunlap, Masahiro Yamada, Richard Weinberger,
Linux Kbuild mailing list, linux-um, Linux Kernel Mailing List
[-- Attachment #1: Type: text/plain, Size: 1549 bytes --]
Christoph Hellwig <hch@lst.de> writes:
> On Wed, Jul 18, 2018 at 12:06:26AM -0700, Randy Dunlap wrote:
>> All $ARCH look equivalent except for microblaze and nios2.
>> For those, the config SWAP in init/Kconfig (line 221) comes before (and
>> hence takes precedence) over arch/$(SRCARCH)/Kconfig settings, which is
>> def_bool n for both microblaze and nios2.
>
> Both of those are NOMMU architectures, so the default SWAP
> decaration should do the right thing.
>
> I wish the kconfig tools could warn about duplicate symbols, as they
> are basically always bogus or at least very problematic.
Your wish is our command ;-)
A big but: duplicate symbol definitions are explicitely allowed by the
kconfig language, so you find most of those duplicates are actually just
varying dependencies or default values. At least, it is interesting to
see how "duplicate" symbol definitions are used and perhaps this helps
you with your reordering.
This is just a prototype, that hopefully helps with your current task,
so I did not pay too much attention to make it beautiful. Please let me
know if anything is missing.
Anyway, apply the patch and then invoke "make symcheckconfig" at the
top-level directory.
Dirk
> I've update the kconfig-cleanup branch in git with the fixes, but
> I didn't have time to do anything but a trivial x86 test yet.
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kbuild" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
[-- Attachment #2: symcheckconfig target --]
[-- Type: text/plain, Size: 1934 bytes --]
diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile
index a3ac2c91331c..52a0ee0637e9 100644
--- a/scripts/kconfig/Makefile
+++ b/scripts/kconfig/Makefile
@@ -222,3 +222,8 @@ $(obj)/.%conf-cfg: $(src)/%conf-cfg.sh FORCE
$(call filechk,conf_cfg)
clean-files += .*conf-cfg
+
+PHONY += symcheckconfig
+
+symcheckconfig: $(obj)/conf
+ $< $(silent) --$@ $(Kconfig)
diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c
index 671ff5364497..1083ddcdd05e 100644
--- a/scripts/kconfig/conf.c
+++ b/scripts/kconfig/conf.c
@@ -33,6 +33,7 @@ enum input_mode {
savedefconfig,
listnewconfig,
olddefconfig,
+ symcheckconfig,
};
static enum input_mode input_mode = oldaskconfig;
@@ -466,6 +467,7 @@ static struct option long_opts[] = {
* value but not 'n') with the counter-intuitive name.
*/
{"oldnoconfig", no_argument, NULL, olddefconfig},
+ {"symcheckconfig", no_argument, NULL, symcheckconfig},
{NULL, 0, NULL, 0}
};
@@ -490,6 +492,31 @@ static void conf_usage(const char *progname)
printf(" --randconfig New config with random answer to all options\n");
}
+static void find_sym_dups(void)
+{
+ struct symbol *sym;
+ struct property *prop;
+ int i;
+ int cnt = 0;
+ char *file;
+ int lineno;
+
+ for_all_symbols(i, sym) {
+ for_all_properties(sym, prop, P_SYMBOL) {
+ if (cnt == 1) {
+ printf("Duplicate symbol %s\n\t(%s:%d):\n", sym->name, file, lineno);
+ }
+ if (cnt)
+ printf("\t(%s:%d)\n", prop->file->name, prop->lineno);
+
+ cnt += 1;
+ file = (char *)prop->file->name;
+ lineno = prop->lineno;
+ }
+ cnt = 0;
+ }
+}
+
int main(int ac, char **av)
{
const char *progname = av[0];
@@ -560,6 +587,12 @@ int main(int ac, char **av)
}
name = av[optind];
conf_parse(name);
+
+ if (input_mode == symcheckconfig) {
+ find_sym_dups();
+ exit(0);
+ }
+
//zconfdump(stdout);
if (sync_kconfig) {
name = conf_get_configname();
^ permalink raw reply related [flat|nested] 23+ messages in thread
* Re: include architecture Kconfig files from top-level Kconfig v2
2018-07-08 15:19 include architecture Kconfig files from top-level Kconfig v2 Christoph Hellwig
` (8 preceding siblings ...)
2018-07-08 15:20 ` [PATCH 9/9] kconfig: add a Memory Management options" menu Christoph Hellwig
@ 2018-07-23 10:46 ` Richard Weinberger
9 siblings, 0 replies; 23+ messages in thread
From: Richard Weinberger @ 2018-07-23 10:46 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Masahiro Yamada, Randy Dunlap, linux-kbuild, linux-um, linux-kernel
Am Sonntag, 8. Juli 2018, 17:19:55 CEST schrieb Christoph Hellwig:
> Hi Masahiro,
>
> what do you think about the series below, which moves the includes
> of all the architecture independ Kconfig files to the top-level
> Kconfig instead of duplicating the includes in all architectures?
>
> Note that this only handles the low-hanging fruite, there are a lot
> of other bits that should probably be cleaned up to be common,
> but those will be not entirely trivial.
>
> Changes since v1:
> - add back a remove source statement from arch/arm/Kconfig
> - various fixes from Randy
> - various UML patches to be able to use the common Kconfig
For the UML bits,
Acked-by: Richard Weinberger <richard@nod.at>
Thanks,
//richard
^ permalink raw reply [flat|nested] 23+ messages in thread
end of thread, other threads:[~2018-07-23 10:47 UTC | newest]
Thread overview: 23+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-07-08 15:19 include architecture Kconfig files from top-level Kconfig v2 Christoph Hellwig
2018-07-08 15:19 ` [PATCH 1/9] um: stop abusing KBUILD_KCONFIG Christoph Hellwig
2018-07-08 15:19 ` [PATCH 2/9] um: cleanup Kconfig files Christoph Hellwig
2018-07-08 15:19 ` [PATCH 3/9] um: create a proper drivers Kconfig Christoph Hellwig
2018-07-08 15:19 ` [PATCH 4/9] kconfig: include common Kconfig files from top-level Kconfig Christoph Hellwig
2018-07-11 12:21 ` Masahiro Yamada
2018-07-17 6:33 ` Randy Dunlap
2018-07-17 6:42 ` Randy Dunlap
2018-07-17 6:44 ` Randy Dunlap
2018-07-17 6:55 ` Randy Dunlap
2018-07-17 13:00 ` Christoph Hellwig
2018-07-17 12:59 ` Christoph Hellwig
2018-07-18 7:06 ` Randy Dunlap
2018-07-19 13:11 ` Christoph Hellwig
2018-07-20 19:57 ` Dirk Gouders
2018-07-08 15:20 ` [PATCH 5/9] Kconfig: consolidate the "Kernel hacking" menu Christoph Hellwig
2018-07-08 16:34 ` Randy Dunlap
2018-07-08 15:20 ` [PATCH 6/9] kconfig: include kernel/Kconfig.preempt from init/Kconfig Christoph Hellwig
2018-07-08 16:30 ` Randy Dunlap
2018-07-08 15:20 ` [PATCH 7/9] arch/Kconfig: use a menu to reduce clutter Christoph Hellwig
2018-07-08 15:20 ` [PATCH 8/9] kconfig: move the "Executable file formats" menu to fs/Kconfig.binfmt Christoph Hellwig
2018-07-08 15:20 ` [PATCH 9/9] kconfig: add a Memory Management options" menu Christoph Hellwig
2018-07-23 10:46 ` include architecture Kconfig files from top-level Kconfig v2 Richard Weinberger
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).