LKML Archive on lore.kernel.org
 help / Atom feed
From: Andrew Jeffery <andrew@aj.id.au>
To: linux-kernel@vger.kernel.org
Cc: Andrew Jeffery <andrew@aj.id.au>,
	robh+dt@kernel.org, mark.rutland@arm.com, joel@jms.id.au,
	gregkh@linuxfoundation.org, Eugene.Cho@dell.com,
	a.amelkin@yadro.com, stewart@linux.ibm.com,
	benh@kernel.crashing.org, openbmc@lists.ozlabs.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH v2 4/4] dts: aspeed-g5: Describe VGA, SIO scratch and DAC mux fields
Date: Wed, 11 Jul 2018 15:01:22 +0930
Message-ID: <20180711053122.30773-5-andrew@aj.id.au> (raw)
In-Reply-To: <20180711053122.30773-1-andrew@aj.id.au>

The AST2500 has VGA scratch registers that are read-only, SuperIO
scratch registers that are a mix of read-only and read-write, and a
graphics DAC mux that must be read or configured in the process of
booting e.g. an OpenPOWER system.

These capabilities do not really have a place in other drivers, so
expose them as fields via bmc-misc-ctrl.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---

Since RFC v1:

* Rework labels to what is documented in the bindings
* Fix an incorrect offset property

 arch/arm/boot/dts/aspeed-g5.dtsi | 192 +++++++++++++++++++++++++++++++
 1 file changed, 192 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 17f2714d18a7..c484ac637328 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -187,6 +187,77 @@
 					aspeed,external-nodes = <&gfx &lhc>;
 
 				};
+
+				field@2c.16 {
+					compatible = "bmc-misc-ctrl";
+					offset = <0x2c>;
+					mask = <0x00030000>;
+					label = "dac-mux";
+				};
+
+				field@50.0 {
+					compatible = "bmc-misc-ctrl";
+					offset = <0x50>;
+					mask = <0xffffffff>;
+					label = "vga0";
+					read-only;
+				};
+
+				field@54.0 {
+					compatible = "bmc-misc-ctrl";
+					offset = <0x54>;
+					mask = <0xffffffff>;
+					label = "vga1";
+					read-only;
+				};
+
+				field@58.0 {
+					compatible = "bmc-misc-ctrl";
+					offset = <0x58>;
+					mask = <0xffffffff>;
+					label = "vga2";
+					read-only;
+				};
+
+				field@5c.0 {
+					compatible = "bmc-misc-ctrl";
+					offset = <0x5c>;
+					mask = <0xffffffff>;
+					label = "vga3";
+					read-only;
+				};
+
+				field@60.0 {
+					compatible = "bmc-misc-ctrl";
+					offset = <0x60>;
+					mask = <0xffffffff>;
+					label = "vga4";
+					read-only;
+				};
+
+				field@64.0 {
+					compatible = "bmc-misc-ctrl";
+					offset = <0x64>;
+					mask = <0xffffffff>;
+					label = "vga5";
+					read-only;
+				};
+
+				field@68.0 {
+					compatible = "bmc-misc-ctrl";
+					offset = <0x68>;
+					mask = <0xffffffff>;
+					label = "vga6";
+					read-only;
+				};
+
+				field@6c.0 {
+					compatible = "bmc-misc-ctrl";
+					offset = <0x6c>;
+					mask = <0xffffffff>;
+					label = "vga7";
+					read-only;
+				};
 			};
 
 			rng: hwrng@1e6e2078 {
@@ -343,6 +414,127 @@
 						#reset-cells = <1>;
 					};
 
+					field@f0.24 {
+						compatible = "bmc-misc-ctrl";
+						offset = <0xf0>;
+						mask = <0xff000000>;
+						label = "sio2b";
+					};
+
+					field@f0.16 {
+						compatible = "bmc-misc-ctrl";
+						offset = <0xf0>;
+						mask = <0x00ff0000>;
+						label = "sio2a";
+					};
+
+					field@f0.8 {
+						compatible = "bmc-misc-ctrl";
+						offset = <0xf0>;
+						mask = <0x0000ff00>;
+						bit-shift = <8>;
+						label = "sio29";
+					};
+
+					field@f0.0 {
+						compatible = "bmc-misc-ctrl";
+						offset = <0xf0>;
+						mask = <0x000000ff>;
+						label = "sio28";
+					};
+
+					field@f4.24 {
+						compatible = "bmc-misc-ctrl";
+						offset = <0xf4>;
+						mask = <0xff000000>;
+						label = "sio2f";
+					};
+
+					field@f4.16 {
+						compatible = "bmc-misc-ctrl";
+						offset = <0xf4>;
+						mask = <0x00ff0000>;
+						label = "sio2e";
+					};
+
+					field@f4.8 {
+						compatible = "bmc-misc-ctrl";
+						offset = <0xf4>;
+						mask = <0x0000ff00>;
+						label = "sio2d";
+					};
+
+					field@f4.0 {
+						compatible = "bmc-misc-ctrl";
+						offset = <0xf4>;
+						mask = <0x000000ff>;
+						label = "sio2c";
+					};
+
+					field@f8.24 {
+						compatible = "bmc-misc-ctrl";
+						offset = <0xf8>;
+						mask = <0xff000000>;
+						read-only;
+						label = "sio23";
+					};
+
+					field@f8.16 {
+						compatible = "bmc-misc-ctrl";
+						offset = <0xf8>;
+						mask = <0x00ff0000>;
+						read-only;
+						label = "sio22";
+					};
+
+					field@f8.8 {
+						compatible = "bmc-misc-ctrl";
+						offset = <0xf8>;
+						mask = <0x0000ff00>;
+						read-only;
+						label = "sio21";
+					};
+
+					field@f8.0 {
+						compatible = "bmc-misc-ctrl";
+						offset = <0xf8>;
+						mask = <0x000000ff>;
+						read-only;
+						label = "sio20";
+					};
+
+					field@fc.24 {
+						compatible = "bmc-misc-ctrl";
+						offset = <0xfc>;
+						mask = <0xff000000>;
+						read-only;
+						label = "sio27";
+					};
+
+					field@fc.16 {
+						compatible = "bmc-misc-ctrl";
+						offset = <0xfc>;
+						mask = <0x00ff0000>;
+						read-only;
+						label = "sio26";
+					};
+
+					field@fc.8 {
+						compatible = "bmc-misc-ctrl";
+						offset = <0xfc>;
+						mask = <0x0000ff00>;
+						read-only;
+						label = "sio25";
+					};
+
+					field@fc.0 {
+						compatible = "bmc-misc-ctrl";
+						offset = <0xfc>;
+						mask = <0x000000ff>;
+						read-only;
+						label = "sio24";
+					};
+
 					ibt: ibt@c0 {
 						compatible = "aspeed,ast2500-ibt-bmc";
 						reg = <0xc0 0x18>;
-- 
2.17.1


      parent reply index

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-11  5:31 [RFC PATCH v2 0/4] sysfs interface to miscellaneous BMC controls and fields Andrew Jeffery
2018-07-11  5:31 ` [RFC PATCH v2 1/4] dt-bindings: misc: Add bindings for misc. BMC control fields Andrew Jeffery
2018-07-11 20:04   ` Rob Herring
2018-07-12  0:14     ` Benjamin Herrenschmidt
2018-07-12  0:53     ` Andrew Jeffery
2018-07-12 15:11       ` Rob Herring
2018-07-13  0:55         ` Benjamin Herrenschmidt
2018-07-13  6:31           ` Andrew Jeffery
2018-07-13 15:14             ` Alexander Amelkin
2018-07-13 18:49               ` Eugene.Cho
2018-07-13 19:03                 ` Greg KH
2018-07-13 19:06                   ` Eugene.Cho
2018-07-15 14:21                     ` Avi Fishman
2018-07-16  0:57               ` Andrew Jeffery
2018-07-16 13:55             ` Rob Herring
2018-07-17  1:04               ` Andrew Jeffery
2018-07-17  4:56               ` Benjamin Herrenschmidt
2018-07-17 23:28                 ` Andrew Jeffery
2018-07-18 19:07                   ` Rob Herring
2018-07-19  1:57                     ` Andrew Jeffery
2018-07-18 19:50                 ` Rob Herring
2018-07-18 23:58                   ` Benjamin Herrenschmidt
2018-07-19  2:28                     ` Andrew Jeffery
2018-07-19  4:35                       ` Benjamin Herrenschmidt
2018-07-20  0:07                         ` Andrew Jeffery
2018-07-20  4:56                           ` Benjamin Herrenschmidt
2018-08-10  0:22                             ` Kun Yi
2018-08-23 15:32                           ` Alexander Amelkin
2018-07-11  5:31 ` [RFC PATCH v2 2/4] Documentation: ABI: Add sysfs-devices-platform-field to testing Andrew Jeffery
2018-07-11  5:31 ` [RFC PATCH v2 3/4] misc: Add bmc-misc-ctrl Andrew Jeffery
2018-07-11  5:31 ` Andrew Jeffery [this message]

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180711053122.30773-5-andrew@aj.id.au \
    --to=andrew@aj.id.au \
    --cc=Eugene.Cho@dell.com \
    --cc=a.amelkin@yadro.com \
    --cc=benh@kernel.crashing.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=joel@jms.id.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=openbmc@lists.ozlabs.org \
    --cc=robh+dt@kernel.org \
    --cc=stewart@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org linux-kernel@archiver.kernel.org
	public-inbox-index lkml


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox