linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v4 00/10] Add the I3C subsystem
@ 2018-03-30  7:47 Boris Brezillon
  2018-03-30  7:47 ` [PATCH v4 01/10] i3c: Add core I3C infrastructure Boris Brezillon
                   ` (10 more replies)
  0 siblings, 11 replies; 51+ messages in thread
From: Boris Brezillon @ 2018-03-30  7:47 UTC (permalink / raw)
  To: Wolfram Sang, linux-i2c, Jonathan Corbet, linux-doc,
	Greg Kroah-Hartman, Arnd Bergmann
  Cc: Przemyslaw Sroka, Arkadiusz Golec, Alan Douglas, Bartosz Folta,
	Damian Kos, Alicja Jurasik-Urbaniak, Cyprian Wronka,
	Suresh Punnoose, Rafal Ciepiela, Thomas Petazzoni,
	Nishanth Menon, Rob Herring, Pawel Moll, Mark Rutland,
	Ian Campbell, Kumar Gala, devicetree, linux-kernel, Vitor Soares,
	Geert Uytterhoeven, Linus Walleij, Xiang Lin, linux-gpio,
	Boris Brezillon

This patch series is a proposal for a new I3C subsystem.

This infrastructure is not complete yet and will be extended over
time.

There are a few design choices that are worth mentioning because they
impact the way I3C device drivers can interact with their devices:

- all functions used to send I3C/I2C frames must be called in
  non-atomic context. Mainly done this way to ease implementation, but
  this is still open to discussion. Please let me know if you think it's
  worth considering an asynchronous model here
- the bus element is a separate object and is not implicitly described
  by the master (as done in I2C). The reason is that I want to be able
  to handle multiple master connected to the same bus and visible to
  Linux.
  In this situation, we should only have one instance of the device and
  not one per master, and sharing the bus object would be part of the
  solution to gracefully handle this case.
  I'm not sure if we will ever need to deal with multiple masters
  controlling the same bus and exposed under Linux, but separating the
  bus and master concept is pretty easy, hence the decision to do it
  now, just in case we need it some day.
  The other benefit of separating the bus and master concepts is that
  master devices appear under the bus directory in sysfs.
- I2C backward compatibility has been designed to be transparent to I2C
  drivers and the I2C subsystem. The I3C master just registers an I2C
  adapter which creates a new I2C bus. I'd say that, from a
  representation PoV it's not ideal because what should appear as a
  single I3C bus exposing I3C and I2C devices here appears as 2
  different busses connected to each other through the parenting (the
  I3C master is the parent of the I2C and I3C busses).
  On the other hand, I don't see a better solution if we want something
  that is not invasive.

Missing features in this preliminary version:
- support for HDR modes (has been removed because of lack of real users)
- no support for multi-master and the associated concepts (mastership
  handover, support for secondary masters, ...)
- I2C devices can only be described using DT because this is the only
  use case I have. However, the framework can easily be extended with
  ACPI and board info support
- I3C slave framework. This has been completely omitted, but shouldn't
  have a huge impact on the I3C framework because I3C slaves don't see
  the whole bus, it's only about handling master requests and generating
  IBIs. Some of the struct, constant and enum definitions could be
  shared, but most of the I3C slave framework logic will be different

Main changes between v2 and v3 are:
- Reworked the DT bindings as suggested by Rob
- Reworked the bus initialization step as suggested by Vitor
- Added a driver for an I3C GPIO expander

Main changes between the initial RFC and this v2 are:
- Add a generic infrastructure to support IBIs. It's worth mentioning
  that I tried exposing IBIs as a regular IRQs, but after several
  attempts and a discussion with Mark Zyngier, it appeared that it was
  not really fitting in the Linux IRQ model (the fact that you have
  payload attached to IBIs, the fact that most of the time an IBI will
  generate a transfer on the bus which has to be done in an atomic
  context, ...)
  The counterpart of this decision is the latency induced by the
  workqueue approach, but since I don't have real use cases, I don't
  know if this can be a problem or not. 
- Add helpers to support Hot Join
- Add support for IBIs and Hot Join in Cadence I3C master driver
- Address several issues in how I was using the device model

Note that I2C changes have been sent separately [1] this time. Other
than that, no big changes in this version, I just addressed the
comments I received from Thomas, Peter, Geert and Rob.

Thanks,

Boris

[1]https://patchwork.ozlabs.org/project/linux-i2c/list/?series=35687

Boris Brezillon (10):
  i3c: Add core I3C infrastructure
  docs: driver-api: Add I3C documentation
  i3c: Add sysfs ABI spec
  dt-bindings: i3c: Document core bindings
  dt-bindings: i3c: Add macros to help fill I3C/I2C device's reg
    property
  MAINTAINERS: Add myself as the I3C subsystem maintainer
  i3c: master: Add driver for Cadence IP
  dt-bindings: i3c: Document Cadence I3C master bindings
  gpio: Add a driver for Cadence I3C GPIO expander
  dt-bindings: gpio: Add bindings for Cadence I3C gpio expander

 Documentation/ABI/testing/sysfs-bus-i3c            |   95 ++
 .../devicetree/bindings/gpio/gpio-cdns-i3c.txt     |   39 +
 .../devicetree/bindings/i3c/cdns,i3c-master.txt    |   44 +
 Documentation/devicetree/bindings/i3c/i3c.txt      |  140 ++
 Documentation/driver-api/i3c/conf.py               |   10 +
 Documentation/driver-api/i3c/device-driver-api.rst |    7 +
 Documentation/driver-api/i3c/index.rst             |    9 +
 Documentation/driver-api/i3c/master-driver-api.rst |    8 +
 Documentation/driver-api/i3c/protocol.rst          |  201 +++
 Documentation/driver-api/index.rst                 |    1 +
 MAINTAINERS                                        |    9 +
 drivers/Kconfig                                    |    2 +
 drivers/Makefile                                   |    2 +-
 drivers/gpio/Kconfig                               |   11 +
 drivers/gpio/Makefile                              |    1 +
 drivers/gpio/gpio-cdns-i3c.c                       |  380 +++++
 drivers/i3c/Kconfig                                |   24 +
 drivers/i3c/Makefile                               |    4 +
 drivers/i3c/core.c                                 |  620 +++++++
 drivers/i3c/device.c                               |  294 ++++
 drivers/i3c/internals.h                            |   28 +
 drivers/i3c/master.c                               | 1723 ++++++++++++++++++++
 drivers/i3c/master/Kconfig                         |    5 +
 drivers/i3c/master/Makefile                        |    1 +
 drivers/i3c/master/i3c-master-cdns.c               | 1650 +++++++++++++++++++
 include/dt-bindings/i3c/i3c.h                      |   28 +
 include/linux/i3c/ccc.h                            |  382 +++++
 include/linux/i3c/device.h                         |  305 ++++
 include/linux/i3c/master.h                         |  587 +++++++
 include/linux/mod_devicetable.h                    |   17 +
 30 files changed, 6626 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-i3c
 create mode 100644 Documentation/devicetree/bindings/gpio/gpio-cdns-i3c.txt
 create mode 100644 Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt
 create mode 100644 Documentation/devicetree/bindings/i3c/i3c.txt
 create mode 100644 Documentation/driver-api/i3c/conf.py
 create mode 100644 Documentation/driver-api/i3c/device-driver-api.rst
 create mode 100644 Documentation/driver-api/i3c/index.rst
 create mode 100644 Documentation/driver-api/i3c/master-driver-api.rst
 create mode 100644 Documentation/driver-api/i3c/protocol.rst
 create mode 100644 drivers/gpio/gpio-cdns-i3c.c
 create mode 100644 drivers/i3c/Kconfig
 create mode 100644 drivers/i3c/Makefile
 create mode 100644 drivers/i3c/core.c
 create mode 100644 drivers/i3c/device.c
 create mode 100644 drivers/i3c/internals.h
 create mode 100644 drivers/i3c/master.c
 create mode 100644 drivers/i3c/master/Kconfig
 create mode 100644 drivers/i3c/master/Makefile
 create mode 100644 drivers/i3c/master/i3c-master-cdns.c
 create mode 100644 include/dt-bindings/i3c/i3c.h
 create mode 100644 include/linux/i3c/ccc.h
 create mode 100644 include/linux/i3c/device.h
 create mode 100644 include/linux/i3c/master.h

-- 
2.14.1

^ permalink raw reply	[flat|nested] 51+ messages in thread

* [PATCH v4 01/10] i3c: Add core I3C infrastructure
  2018-03-30  7:47 [PATCH v4 00/10] Add the I3C subsystem Boris Brezillon
@ 2018-03-30  7:47 ` Boris Brezillon
  2018-06-04  9:11   ` Przemyslaw Gaj
                     ` (3 more replies)
  2018-03-30  7:47 ` [PATCH v4 02/10] docs: driver-api: Add I3C documentation Boris Brezillon
                   ` (9 subsequent siblings)
  10 siblings, 4 replies; 51+ messages in thread
From: Boris Brezillon @ 2018-03-30  7:47 UTC (permalink / raw)
  To: Wolfram Sang, linux-i2c, Jonathan Corbet, linux-doc,
	Greg Kroah-Hartman, Arnd Bergmann
  Cc: Przemyslaw Sroka, Arkadiusz Golec, Alan Douglas, Bartosz Folta,
	Damian Kos, Alicja Jurasik-Urbaniak, Cyprian Wronka,
	Suresh Punnoose, Rafal Ciepiela, Thomas Petazzoni,
	Nishanth Menon, Rob Herring, Pawel Moll, Mark Rutland,
	Ian Campbell, Kumar Gala, devicetree, linux-kernel, Vitor Soares,
	Geert Uytterhoeven, Linus Walleij, Xiang Lin, linux-gpio,
	Boris Brezillon

Add core infrastructure to support I3C in Linux and document it.

This infrastructure is not complete yet and will be extended over
time.

There are a few design choices that are worth mentioning because they
impact the way I3C device drivers can interact with their devices:

- all functions used to send I3C/I2C frames must be called in
  non-atomic context. Mainly done this way to ease implementation, but
  this is still open to discussion. Please let me know if you think
  it's worth considering an asynchronous model here
- the bus element is a separate object and is not implicitly described
  by the master (as done in I2C). The reason is that I want to be able
  to handle multiple master connected to the same bus and visible to
  Linux.
  In this situation, we should only have one instance of the device and
  not one per master, and sharing the bus object would be part of the
  solution to gracefully handle this case.
  I'm not sure we will ever need to deal with multiple masters
  controlling the same bus and exposed under Linux, but separating the
  bus and master concept is pretty easy, hence the decision to do it
  like that.
  The other benefit of separating the bus and master concepts is that
  master devices appear under the bus directory in sysfs.
- I2C backward compatibility has been designed to be transparent to I2C
  drivers and the I2C subsystem. The I3C master just registers an I2C
  adapter which creates a new I2C bus. I'd say that, from a
  representation PoV it's not ideal because what should appear as a
  single I3C bus exposing I3C and I2C devices here appears as 2
  different busses connected to each other through the parenting (the
  I3C master is the parent of the I2C and I3C busses).
  On the other hand, I don't see a better solution if we want something
  that is not invasive.

Missing features in this preliminary version:
- I3C HDR modes are not supported
- no support for multi-master and the associated concepts (mastership
  handover, support for secondary masters, ...)
- I2C devices can only be described using DT because this is the only
  use case I have. However, the framework can easily be extended with
  ACPI and board info support
- I3C slave framework. This has been completely omitted, but shouldn't
  have a huge impact on the I3C framework because I3C slaves don't see
  the whole bus, it's only about handling master requests and generating
  IBIs. Some of the struct, constant and enum definitions could be
  shared, but most of the I3C slave framework logic will be different

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
---
Changes in v3:
- Fix locking issues
- Explicitly include a bunch of headers (reported by Randy Dunlap)
- Rename {i2c,i3c}-scl-frequency DT prop into {i2c,i3c}-scl-hz
- Do not use BIT() macro in mod_devicetable.h
- Fix typos
- Fix/enhance some kernel doc headers
- Rework the bus initialization code to simplify master drivers
- Assign dynamic address with SETDASA if the device has a static
  address and the DT has a valid assigned-address property
- Rework the LVR extraction in DT parsing code
- Add code to detect when a device is re-attached to the bus after
  losing its dynamic address. In this case we know try to re-assign the
  old address, and most importantly, the I3C device driver sees the same
  device instance, not a new one
- Add an ->i2c_funcs() hook to let the master declare which I2C features
  it supports
- Unexport a few functions
- Remove support for HDR mode since we have no real user yet

Changes in v2:
- Fix a bunch of mistake I made with the device model (pointed by GKH)
- Move the documentation out of this commit (pointed by GKH)
- only source drivers/i3c/master/Kconfig when CONFIG_I3C is enabled
  (pointed by GKH)
- Add IBI infrastructure
- Add helpers to ease support for Hot Join (most of the logic is
  delegated to I3C controller drivers)
- move the doc out of this commit to improve readability
- Fix a few bugs in device probing/remove (detected after trying to
  load/unload modules in various orders)
- Add a module_i3c_i2c_driver() macro to ease integration of drivers
  for devices that support both I3C and I2C mode
---
 drivers/Kconfig                 |    2 +
 drivers/Makefile                |    2 +-
 drivers/i3c/Kconfig             |   24 +
 drivers/i3c/Makefile            |    4 +
 drivers/i3c/core.c              |  620 ++++++++++++++
 drivers/i3c/device.c            |  294 +++++++
 drivers/i3c/internals.h         |   28 +
 drivers/i3c/master.c            | 1723 +++++++++++++++++++++++++++++++++++++++
 drivers/i3c/master/Kconfig      |    0
 drivers/i3c/master/Makefile     |    0
 include/linux/i3c/ccc.h         |  382 +++++++++
 include/linux/i3c/device.h      |  305 +++++++
 include/linux/i3c/master.h      |  587 +++++++++++++
 include/linux/mod_devicetable.h |   17 +
 14 files changed, 3987 insertions(+), 1 deletion(-)
 create mode 100644 drivers/i3c/Kconfig
 create mode 100644 drivers/i3c/Makefile
 create mode 100644 drivers/i3c/core.c
 create mode 100644 drivers/i3c/device.c
 create mode 100644 drivers/i3c/internals.h
 create mode 100644 drivers/i3c/master.c
 create mode 100644 drivers/i3c/master/Kconfig
 create mode 100644 drivers/i3c/master/Makefile
 create mode 100644 include/linux/i3c/ccc.h
 create mode 100644 include/linux/i3c/device.h
 create mode 100644 include/linux/i3c/master.h

diff --git a/drivers/Kconfig b/drivers/Kconfig
index 879dc0604cba..f0563ce52fab 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -55,6 +55,8 @@ source "drivers/char/Kconfig"
 
 source "drivers/i2c/Kconfig"
 
+source "drivers/i3c/Kconfig"
+
 source "drivers/spi/Kconfig"
 
 source "drivers/spmi/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index 24cd47014657..999239dc29d4 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -111,7 +111,7 @@ obj-$(CONFIG_SERIO)		+= input/serio/
 obj-$(CONFIG_GAMEPORT)		+= input/gameport/
 obj-$(CONFIG_INPUT)		+= input/
 obj-$(CONFIG_RTC_LIB)		+= rtc/
-obj-y				+= i2c/ media/
+obj-y				+= i2c/ i3c/ media/
 obj-$(CONFIG_PPS)		+= pps/
 obj-y				+= ptp/
 obj-$(CONFIG_W1)		+= w1/
diff --git a/drivers/i3c/Kconfig b/drivers/i3c/Kconfig
new file mode 100644
index 000000000000..cf3752412ae9
--- /dev/null
+++ b/drivers/i3c/Kconfig
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: GPL-2.0
+
+menuconfig I3C
+	tristate "I3C support"
+	select I2C
+	help
+	  I3C is a serial protocol standardized by the MIPI alliance.
+
+	  It's supposed to be backward compatible with I2C while providing
+	  support for high speed transfers and native interrupt support
+	  without the need for extra pins.
+
+	  The I3C protocol also standardizes the slave device types and is
+	  mainly design to communicate with sensors.
+
+	  If you want I3C support, you should say Y here and also to the
+	  specific driver for your bus adapter(s) below.
+
+	  This I3C support can also be built as a module.  If so, the module
+	  will be called i3c.
+
+if I3C
+source "drivers/i3c/master/Kconfig"
+endif # I3C
diff --git a/drivers/i3c/Makefile b/drivers/i3c/Makefile
new file mode 100644
index 000000000000..3b6d1502d6e6
--- /dev/null
+++ b/drivers/i3c/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+i3c-y				:= core.o device.o master.o
+obj-$(CONFIG_I3C)		+= i3c.o
+obj-$(CONFIG_I3C)		+= master/
diff --git a/drivers/i3c/core.c b/drivers/i3c/core.c
new file mode 100644
index 000000000000..d6d938a785a9
--- /dev/null
+++ b/drivers/i3c/core.c
@@ -0,0 +1,620 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Cadence Design Systems Inc.
+ *
+ * Author: Boris Brezillon <boris.brezillon@bootlin.com>
+ */
+
+#include <linux/device.h>
+#include <linux/idr.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>
+#include <linux/rwsem.h>
+#include <linux/slab.h>
+
+#include "internals.h"
+
+static DEFINE_IDR(i3c_bus_idr);
+static DEFINE_MUTEX(i3c_core_lock);
+
+/**
+ * i3c_bus_maintenance_lock - Lock the bus for a maintenance operation
+ * @bus: I3C bus to take the lock on
+ *
+ * This function takes the bus lock so that no other operations can occur on
+ * the bus. This is needed for all kind of bus maintenance operation, like
+ * - enabling/disabling slave events
+ * - re-triggering DAA
+ * - changing the dynamic address of a device
+ * - relinquishing mastership
+ * - ...
+ *
+ * The reason for this kind of locking is that we don't want drivers and core
+ * logic to rely on I3C device information that could be changed behind their
+ * back.
+ */
+void i3c_bus_maintenance_lock(struct i3c_bus *bus)
+{
+	down_write(&bus->lock);
+}
+EXPORT_SYMBOL_GPL(i3c_bus_maintenance_lock);
+
+/**
+ * i3c_bus_maintenance_unlock - Release the bus lock after a maintenance
+ *			      operation
+ * @bus: I3C bus to release the lock on
+ *
+ * Should be called when the bus maintenance operation is done. See
+ * i3c_bus_maintenance_lock() for more details on what these maintenance
+ * operations are.
+ */
+void i3c_bus_maintenance_unlock(struct i3c_bus *bus)
+{
+	up_write(&bus->lock);
+}
+EXPORT_SYMBOL_GPL(i3c_bus_maintenance_unlock);
+
+/**
+ * i3c_bus_normaluse_lock - Lock the bus for a normal operation
+ * @bus: I3C bus to take the lock on
+ *
+ * This function takes the bus lock for any operation that is not a maintenance
+ * operation (see i3c_bus_maintenance_lock() for a non-exhaustive list of
+ * maintenance operations). Basically all communications with I3C devices are
+ * normal operations (HDR, SDR transfers or CCC commands that do not change bus
+ * state or I3C dynamic address).
+ *
+ * Note that this lock is not guaranteeing serialization of normal operations.
+ * In other words, transfer requests passed to the I3C master can be submitted
+ * in parallel and I3C master drivers have to use their own locking to make
+ * sure two different communications are not inter-mixed, or access to the
+ * output/input queue is not done while the engine is busy.
+ */
+void i3c_bus_normaluse_lock(struct i3c_bus *bus)
+{
+	down_read(&bus->lock);
+}
+EXPORT_SYMBOL_GPL(i3c_bus_normaluse_lock);
+
+/**
+ * i3c_bus_normaluse_unlock - Release the bus lock after a normal operation
+ * @bus: I3C bus to release the lock on
+ *
+ * Should be called when a normal operation is done. See
+ * i3c_bus_normaluse_lock() for more details on what these normal operations
+ * are.
+ */
+void i3c_bus_normaluse_unlock(struct i3c_bus *bus)
+{
+	up_read(&bus->lock);
+}
+EXPORT_SYMBOL_GPL(i3c_bus_normaluse_unlock);
+
+static ssize_t bcr_show(struct device *dev,
+			struct device_attribute *da,
+			char *buf)
+{
+	struct i3c_device *i3cdev = dev_to_i3cdev(dev);
+	struct i3c_bus *bus = i3c_device_get_bus(i3cdev);
+	ssize_t ret;
+
+	i3c_bus_normaluse_lock(bus);
+	ret = sprintf(buf, "%x\n", i3cdev->info.bcr);
+	i3c_bus_normaluse_unlock(bus);
+
+	return ret;
+}
+static DEVICE_ATTR_RO(bcr);
+
+static ssize_t dcr_show(struct device *dev,
+			struct device_attribute *da,
+			char *buf)
+{
+	struct i3c_device *i3cdev = dev_to_i3cdev(dev);
+	struct i3c_bus *bus = i3c_device_get_bus(i3cdev);
+	ssize_t ret;
+
+	i3c_bus_normaluse_lock(bus);
+	ret = sprintf(buf, "%x\n", i3cdev->info.dcr);
+	i3c_bus_normaluse_unlock(bus);
+
+	return ret;
+}
+static DEVICE_ATTR_RO(dcr);
+
+static ssize_t pid_show(struct device *dev,
+			struct device_attribute *da,
+			char *buf)
+{
+	struct i3c_device *i3cdev = dev_to_i3cdev(dev);
+	struct i3c_bus *bus = i3c_device_get_bus(i3cdev);
+	ssize_t ret;
+
+	i3c_bus_normaluse_lock(bus);
+	ret = sprintf(buf, "%llx\n", i3cdev->info.pid);
+	i3c_bus_normaluse_unlock(bus);
+
+	return ret;
+}
+static DEVICE_ATTR_RO(pid);
+
+static ssize_t address_show(struct device *dev,
+			    struct device_attribute *da,
+			    char *buf)
+{
+	struct i3c_device *i3cdev = dev_to_i3cdev(dev);
+	struct i3c_bus *bus = i3c_device_get_bus(i3cdev);
+	ssize_t ret;
+
+	i3c_bus_normaluse_lock(bus);
+	ret = sprintf(buf, "%02x\n", i3cdev->info.dyn_addr);
+	i3c_bus_normaluse_unlock(bus);
+
+	return ret;
+}
+static DEVICE_ATTR_RO(address);
+
+static const char * const hdrcap_strings[] = {
+	"hdr-ddr", "hdr-tsp", "hdr-tsl",
+};
+
+static ssize_t hdrcap_show(struct device *dev,
+			   struct device_attribute *da,
+			   char *buf)
+{
+	struct i3c_device *i3cdev = dev_to_i3cdev(dev);
+	struct i3c_bus *bus = i3c_device_get_bus(i3cdev);
+	unsigned long caps = i3cdev->info.hdr_cap;
+	ssize_t offset = 0, ret;
+	int mode;
+
+	i3c_bus_normaluse_lock(bus);
+	for_each_set_bit(mode, &caps, 8) {
+		if (mode >= ARRAY_SIZE(hdrcap_strings))
+			break;
+
+		if (!hdrcap_strings[mode])
+			continue;
+
+		ret = sprintf(buf + offset, offset ? " %s" : "%s",
+			      hdrcap_strings[mode]);
+		if (ret < 0)
+			goto out;
+
+		offset += ret;
+	}
+
+	ret = sprintf(buf + offset, "\n");
+	if (ret < 0)
+		goto out;
+
+	ret = offset + ret;
+
+out:
+	i3c_bus_normaluse_unlock(bus);
+
+	return ret;
+}
+static DEVICE_ATTR_RO(hdrcap);
+
+static struct attribute *i3c_device_attrs[] = {
+	&dev_attr_bcr.attr,
+	&dev_attr_dcr.attr,
+	&dev_attr_pid.attr,
+	&dev_attr_address.attr,
+	&dev_attr_hdrcap.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(i3c_device);
+
+static int i3c_device_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	struct i3c_device *i3cdev = dev_to_i3cdev(dev);
+	u16 manuf = I3C_PID_MANUF_ID(i3cdev->info.pid);
+	u16 part = I3C_PID_PART_ID(i3cdev->info.pid);
+	u16 ext = I3C_PID_EXTRA_INFO(i3cdev->info.pid);
+
+	if (I3C_PID_RND_LOWER_32BITS(i3cdev->info.pid))
+		return add_uevent_var(env, "MODALIAS=i3c:dcr%02Xmanuf%04X",
+				      i3cdev->info.dcr, manuf);
+
+	return add_uevent_var(env,
+			      "MODALIAS=i3c:dcr%02Xmanuf%04Xpart%04xext%04x",
+			      i3cdev->info.dcr, manuf, part, ext);
+}
+
+const struct device_type i3c_device_type = {
+	.groups	= i3c_device_groups,
+	.uevent = i3c_device_uevent,
+};
+
+const struct device_type i3c_master_type = {
+	.groups	= i3c_device_groups,
+};
+
+static const struct i3c_device_id *
+i3c_device_match_id(struct i3c_device *i3cdev,
+		    const struct i3c_device_id *id_table)
+{
+	const struct i3c_device_id *id;
+
+	/*
+	 * The lower 32bits of the provisional ID is just filled with a random
+	 * value, try to match using DCR info.
+	 */
+	if (!I3C_PID_RND_LOWER_32BITS(i3cdev->info.pid)) {
+		u16 manuf = I3C_PID_MANUF_ID(i3cdev->info.pid);
+		u16 part = I3C_PID_PART_ID(i3cdev->info.pid);
+		u16 ext_info = I3C_PID_EXTRA_INFO(i3cdev->info.pid);
+
+		/* First try to match by manufacturer/part ID. */
+		for (id = id_table; id->match_flags != 0; id++) {
+			if ((id->match_flags & I3C_MATCH_MANUF_AND_PART) !=
+			    I3C_MATCH_MANUF_AND_PART)
+				continue;
+
+			if (manuf != id->manuf_id || part != id->part_id)
+				continue;
+
+			if ((id->match_flags & I3C_MATCH_EXTRA_INFO) &&
+			    ext_info != id->extra_info)
+				continue;
+
+			return id;
+		}
+	}
+
+	/* Fallback to DCR match. */
+	for (id = id_table; id->match_flags != 0; id++) {
+		if ((id->match_flags & I3C_MATCH_DCR) &&
+		    id->dcr == i3cdev->info.dcr)
+			return id;
+	}
+
+	return NULL;
+}
+
+static int i3c_device_match(struct device *dev, struct device_driver *drv)
+{
+	struct i3c_device *i3cdev;
+	struct i3c_driver *i3cdrv;
+
+	if (dev->type != &i3c_device_type)
+		return 0;
+
+	i3cdev = dev_to_i3cdev(dev);
+	i3cdrv = drv_to_i3cdrv(drv);
+	if (i3c_device_match_id(i3cdev, i3cdrv->id_table))
+		return 1;
+
+	return 0;
+}
+
+static int i3c_device_probe(struct device *dev)
+{
+	struct i3c_device *i3cdev = dev_to_i3cdev(dev);
+	struct i3c_driver *driver = drv_to_i3cdrv(dev->driver);
+
+	return driver->probe(i3cdev);
+}
+
+static int i3c_device_remove(struct device *dev)
+{
+	struct i3c_device *i3cdev = dev_to_i3cdev(dev);
+	struct i3c_driver *driver = drv_to_i3cdrv(dev->driver);
+	int ret;
+
+	ret = driver->remove(i3cdev);
+	if (ret)
+		return ret;
+
+	if (WARN_ON(i3cdev->ibi))
+		i3c_device_free_ibi(i3cdev);
+
+	return ret;
+}
+
+struct bus_type i3c_bus_type = {
+	.name = "i3c",
+	.match = i3c_device_match,
+	.probe = i3c_device_probe,
+	.remove = i3c_device_remove,
+};
+
+enum i3c_addr_slot_status i3c_bus_get_addr_slot_status(struct i3c_bus *bus,
+						       u16 addr)
+{
+	int status, bitpos = addr * 2;
+
+	if (addr > I2C_MAX_ADDR)
+		return I3C_ADDR_SLOT_RSVD;
+
+	status = bus->addrslots[bitpos / BITS_PER_LONG];
+	status >>= bitpos % BITS_PER_LONG;
+
+	return status & I3C_ADDR_SLOT_STATUS_MASK;
+}
+
+void i3c_bus_set_addr_slot_status(struct i3c_bus *bus, u16 addr,
+				  enum i3c_addr_slot_status status)
+{
+	int bitpos = addr * 2;
+	unsigned long *ptr;
+
+	if (addr > I2C_MAX_ADDR)
+		return;
+
+	ptr = bus->addrslots + (bitpos / BITS_PER_LONG);
+	*ptr &= ~(I3C_ADDR_SLOT_STATUS_MASK << (bitpos % BITS_PER_LONG));
+	*ptr |= status << (bitpos % BITS_PER_LONG);
+}
+
+bool i3c_bus_dev_addr_is_avail(struct i3c_bus *bus, u8 addr)
+{
+	enum i3c_addr_slot_status status;
+
+	status = i3c_bus_get_addr_slot_status(bus, addr);
+
+	return status == I3C_ADDR_SLOT_FREE;
+}
+
+int i3c_bus_get_free_addr(struct i3c_bus *bus, u8 start_addr)
+{
+	enum i3c_addr_slot_status status;
+	u8 addr;
+
+	for (addr = start_addr; addr < I3C_MAX_ADDR; addr++) {
+		status = i3c_bus_get_addr_slot_status(bus, addr);
+		if (status == I3C_ADDR_SLOT_FREE)
+			return addr;
+	}
+
+	return -ENOMEM;
+}
+
+static void i3c_bus_init_addrslots(struct i3c_bus *bus)
+{
+	int i;
+
+	/* Addresses 0 to 7 are reserved. */
+	for (i = 0; i < 8; i++)
+		i3c_bus_set_addr_slot_status(bus, i, I3C_ADDR_SLOT_RSVD);
+
+	/*
+	 * Reserve broadcast address and all addresses that might collide
+	 * with the broadcast address when facing a single bit error.
+	 */
+	i3c_bus_set_addr_slot_status(bus, I3C_BROADCAST_ADDR,
+				     I3C_ADDR_SLOT_RSVD);
+	for (i = 0; i < 7; i++)
+		i3c_bus_set_addr_slot_status(bus, I3C_BROADCAST_ADDR ^ BIT(i),
+					     I3C_ADDR_SLOT_RSVD);
+}
+
+static const char * const i3c_bus_mode_strings[] = {
+	[I3C_BUS_MODE_PURE] = "pure",
+	[I3C_BUS_MODE_MIXED_FAST] = "mixed-fast",
+	[I3C_BUS_MODE_MIXED_SLOW] = "mixed-slow",
+};
+
+static ssize_t mode_show(struct device *dev,
+			 struct device_attribute *da,
+			 char *buf)
+{
+	struct i3c_bus *i3cbus = container_of(dev, struct i3c_bus, dev);
+	ssize_t ret;
+
+	i3c_bus_normaluse_lock(i3cbus);
+	if (i3cbus->mode < 0 ||
+	    i3cbus->mode > ARRAY_SIZE(i3c_bus_mode_strings) ||
+	    !i3c_bus_mode_strings[i3cbus->mode])
+		ret = sprintf(buf, "unknown\n");
+	else
+		ret = sprintf(buf, "%s\n", i3c_bus_mode_strings[i3cbus->mode]);
+	i3c_bus_normaluse_unlock(i3cbus);
+
+	return ret;
+}
+static DEVICE_ATTR_RO(mode);
+
+static ssize_t current_master_show(struct device *dev,
+				   struct device_attribute *da,
+				   char *buf)
+{
+	struct i3c_bus *i3cbus = container_of(dev, struct i3c_bus, dev);
+	ssize_t ret;
+
+	i3c_bus_normaluse_lock(i3cbus);
+	ret = sprintf(buf, "%s\n", dev_name(&i3cbus->cur_master->dev));
+	i3c_bus_normaluse_unlock(i3cbus);
+
+	return ret;
+}
+static DEVICE_ATTR_RO(current_master);
+
+static ssize_t i3c_scl_frequency_show(struct device *dev,
+				      struct device_attribute *da,
+				      char *buf)
+{
+	struct i3c_bus *i3cbus = container_of(dev, struct i3c_bus, dev);
+	ssize_t ret;
+
+	i3c_bus_normaluse_lock(i3cbus);
+	ret = sprintf(buf, "%ld\n", i3cbus->scl_rate.i3c);
+	i3c_bus_normaluse_unlock(i3cbus);
+
+	return ret;
+}
+static DEVICE_ATTR_RO(i3c_scl_frequency);
+
+static ssize_t i2c_scl_frequency_show(struct device *dev,
+				      struct device_attribute *da,
+				      char *buf)
+{
+	struct i3c_bus *i3cbus = container_of(dev, struct i3c_bus, dev);
+	ssize_t ret;
+
+	i3c_bus_normaluse_lock(i3cbus);
+	ret = sprintf(buf, "%ld\n", i3cbus->scl_rate.i2c);
+	i3c_bus_normaluse_unlock(i3cbus);
+
+	return ret;
+}
+static DEVICE_ATTR_RO(i2c_scl_frequency);
+
+static struct attribute *i3c_busdev_attrs[] = {
+	&dev_attr_mode.attr,
+	&dev_attr_current_master.attr,
+	&dev_attr_i3c_scl_frequency.attr,
+	&dev_attr_i2c_scl_frequency.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(i3c_busdev);
+
+static void i3c_busdev_release(struct device *dev)
+{
+	struct i3c_bus *bus = container_of(dev, struct i3c_bus, dev);
+
+	while (!list_empty(&bus->devs.i2c)) {
+		struct i2c_device *i2cdev;
+
+		i2cdev = list_first_entry(&bus->devs.i2c, struct i2c_device,
+					  common.node);
+		list_del(&i2cdev->common.node);
+		of_node_put(i2cdev->info.of_node);
+		kfree(i2cdev);
+	}
+
+	while (!list_empty(&bus->devs.i3c)) {
+		struct i3c_device *i3cdev;
+
+		i3cdev = list_first_entry(&bus->devs.i3c, struct i3c_device,
+					  common.node);
+		list_del(&i3cdev->common.node);
+		put_device(&i3cdev->dev);
+	}
+
+	mutex_lock(&i3c_core_lock);
+	idr_remove(&i3c_bus_idr, bus->id);
+	mutex_unlock(&i3c_core_lock);
+
+	of_node_put(bus->dev.of_node);
+	kfree(bus);
+}
+
+static const struct device_type i3c_busdev_type = {
+	.groups	= i3c_busdev_groups,
+};
+
+void i3c_bus_unref(struct i3c_bus *bus)
+{
+	put_device(&bus->dev);
+}
+
+struct i3c_bus *i3c_bus_create(struct device *parent)
+{
+	struct i3c_bus *i3cbus;
+	int ret;
+
+	i3cbus = kzalloc(sizeof(*i3cbus), GFP_KERNEL);
+	if (!i3cbus)
+		return ERR_PTR(-ENOMEM);
+
+	init_rwsem(&i3cbus->lock);
+	INIT_LIST_HEAD(&i3cbus->devs.i2c);
+	INIT_LIST_HEAD(&i3cbus->devs.i3c);
+	i3c_bus_init_addrslots(i3cbus);
+	i3cbus->mode = I3C_BUS_MODE_PURE;
+	i3cbus->dev.parent = parent;
+	i3cbus->dev.of_node = of_node_get(parent->of_node);
+	i3cbus->dev.bus = &i3c_bus_type;
+	i3cbus->dev.type = &i3c_busdev_type;
+	i3cbus->dev.release = i3c_busdev_release;
+
+	mutex_lock(&i3c_core_lock);
+	ret = idr_alloc(&i3c_bus_idr, i3cbus, 0, 0, GFP_KERNEL);
+	mutex_unlock(&i3c_core_lock);
+	if (ret < 0)
+		goto err_free_bus;
+
+	i3cbus->id = ret;
+	device_initialize(&i3cbus->dev);
+
+	return i3cbus;
+
+err_free_bus:
+	kfree(i3cbus);
+
+	return ERR_PTR(ret);
+}
+
+void i3c_bus_unregister(struct i3c_bus *bus)
+{
+	device_unregister(&bus->dev);
+}
+
+int i3c_bus_register(struct i3c_bus *i3cbus)
+{
+	struct i2c_device *i2cdev;
+
+	i3c_bus_for_each_i2cdev(i3cbus, i2cdev) {
+		switch (i2cdev->lvr & I3C_LVR_I2C_INDEX_MASK) {
+		case I3C_LVR_I2C_INDEX(0):
+			if (i3cbus->mode < I3C_BUS_MODE_MIXED_FAST)
+				i3cbus->mode = I3C_BUS_MODE_MIXED_FAST;
+			break;
+
+		case I3C_LVR_I2C_INDEX(1):
+		case I3C_LVR_I2C_INDEX(2):
+			if (i3cbus->mode < I3C_BUS_MODE_MIXED_SLOW)
+				i3cbus->mode = I3C_BUS_MODE_MIXED_SLOW;
+			break;
+
+		default:
+			return -EINVAL;
+		}
+	}
+
+	if (!i3cbus->scl_rate.i3c)
+		i3cbus->scl_rate.i3c = I3C_BUS_TYP_I3C_SCL_RATE;
+
+	if (!i3cbus->scl_rate.i2c) {
+		if (i3cbus->mode == I3C_BUS_MODE_MIXED_SLOW)
+			i3cbus->scl_rate.i2c = I3C_BUS_I2C_FM_SCL_RATE;
+		else
+			i3cbus->scl_rate.i2c = I3C_BUS_I2C_FM_PLUS_SCL_RATE;
+	}
+
+	/*
+	 * I3C/I2C frequency may have been overridden, check that user-provided
+	 * values are not exceeding max possible frequency.
+	 */
+	if (i3cbus->scl_rate.i3c > I3C_BUS_MAX_I3C_SCL_RATE ||
+	    i3cbus->scl_rate.i2c > I3C_BUS_I2C_FM_PLUS_SCL_RATE) {
+		return -EINVAL;
+	}
+
+	dev_set_name(&i3cbus->dev, "i3c-%d", i3cbus->id);
+
+	return device_add(&i3cbus->dev);
+}
+
+static int __init i3c_init(void)
+{
+	return bus_register(&i3c_bus_type);
+}
+subsys_initcall(i3c_init);
+
+static void __exit i3c_exit(void)
+{
+	idr_destroy(&i3c_bus_idr);
+	bus_unregister(&i3c_bus_type);
+}
+module_exit(i3c_exit);
+
+MODULE_AUTHOR("Boris Brezillon <boris.brezillon@bootlin.com>");
+MODULE_DESCRIPTION("I3C core");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/i3c/device.c b/drivers/i3c/device.c
new file mode 100644
index 000000000000..8948d9bdec82
--- /dev/null
+++ b/drivers/i3c/device.c
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Cadence Design Systems Inc.
+ *
+ * Author: Boris Brezillon <boris.brezillon@bootlin.com>
+ */
+
+#include <linux/atomic.h>
+#include <linux/bug.h>
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+
+#include "internals.h"
+
+/**
+ * i3c_device_do_priv_xfers() - do I3C SDR private transfers directed to a
+ *				specific device
+ *
+ * @dev: device with which the transfers should be done
+ * @xfers: array of transfers
+ * @nxfers: number of transfers
+ *
+ * Initiate one or several private SDR transfers with @dev.
+ *
+ * This function can sleep and thus cannot be called in atomic context.
+ *
+ * Return: 0 in case of success, a negative error core otherwise.
+ */
+int i3c_device_do_priv_xfers(struct i3c_device *dev,
+			     struct i3c_priv_xfer *xfers,
+			     int nxfers)
+{
+	struct i3c_master_controller *master;
+	int ret, i;
+
+	if (nxfers < 1)
+		return 0;
+
+	master = i3c_device_get_master(dev);
+	if (!master || !xfers)
+		return -EINVAL;
+
+	if (!master->ops->priv_xfers)
+		return -ENOTSUPP;
+
+	for (i = 0; i < nxfers; i++) {
+		if (!xfers[i].len || !xfers[i].data.in)
+			return -EINVAL;
+	}
+
+	i3c_bus_normaluse_lock(master->bus);
+	ret = master->ops->priv_xfers(dev, xfers, nxfers);
+	i3c_bus_normaluse_unlock(master->bus);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(i3c_device_do_priv_xfers);
+
+/**
+ * i3c_device_get_info() - get I3C device information
+ *
+ * @dev: device we want information on
+ * @info: the information object to fill in
+ *
+ * Retrieve I3C dev info.
+ */
+void i3c_device_get_info(struct i3c_device *dev,
+			 struct i3c_device_info *info)
+{
+	if (info)
+		*info = dev->info;
+}
+EXPORT_SYMBOL_GPL(i3c_device_get_info);
+
+/**
+ * i3c_device_disable_ibi() - Disable IBIs coming from a specific device
+ * @dev: device on which IBIs should be disabled
+ *
+ * This function disable IBIs coming from a specific device and wait for
+ * all pending IBIs to be processed.
+ *
+ * Return: 0 in case of success, a negative error core otherwise.
+ */
+int i3c_device_disable_ibi(struct i3c_device *dev)
+{
+	struct i3c_master_controller *master = i3c_device_get_master(dev);
+	int ret;
+
+	i3c_bus_normaluse_lock(master->bus);
+	mutex_lock(&dev->ibi_lock);
+	if (!dev->ibi) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = master->ops->disable_ibi(dev);
+	if (ret)
+		goto out;
+
+	reinit_completion(&dev->ibi->all_ibis_handled);
+	if (atomic_read(&dev->ibi->pending_ibis))
+		wait_for_completion(&dev->ibi->all_ibis_handled);
+
+	dev->ibi->enabled = false;
+
+out:
+	mutex_unlock(&dev->ibi_lock);
+	i3c_bus_normaluse_unlock(master->bus);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(i3c_device_disable_ibi);
+
+/**
+ * i3c_device_enable_ibi() - Enable IBIs coming from a specific device
+ * @dev: device on which IBIs should be enabled
+ *
+ * This function enable IBIs coming from a specific device and wait for
+ * all pending IBIs to be processed. This should be called on a device
+ * where i3c_device_request_ibi() has succeeded.
+ *
+ * Note that IBIs from this device might be received before this function
+ * returns to its caller.
+ *
+ * Return: 0 in case of success, a negative error core otherwise.
+ */
+int i3c_device_enable_ibi(struct i3c_device *dev)
+{
+	struct i3c_master_controller *master = i3c_device_get_master(dev);
+	int ret;
+
+	i3c_bus_normaluse_lock(master->bus);
+	mutex_lock(&dev->ibi_lock);
+	if (!dev->ibi) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = master->ops->enable_ibi(dev);
+	if (!ret)
+		dev->ibi->enabled = true;
+
+out:
+	mutex_unlock(&dev->ibi_lock);
+	i3c_bus_normaluse_unlock(master->bus);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(i3c_device_enable_ibi);
+
+/**
+ * i3c_device_request_ibi() - Request an IBI
+ * @dev: device for which we should enable IBIs
+ * @req: setup requested for this IBI
+ *
+ * This function is responsible for pre-allocating all resources needed to
+ * process IBIs coming from @dev. When this function returns, the IBI is not
+ * enabled until i3c_device_enable_ibi() is called.
+ *
+ * Return: 0 in case of success, a negative error core otherwise.
+ */
+int i3c_device_request_ibi(struct i3c_device *dev,
+			   const struct i3c_ibi_setup *req)
+{
+	struct i3c_master_controller *master = i3c_device_get_master(dev);
+	struct i3c_device_ibi_info *ibi;
+	int ret;
+
+	if (!master->ops->request_ibi)
+		return -ENOTSUPP;
+
+	if (!req->handler || !req->num_slots)
+		return -EINVAL;
+
+	i3c_bus_normaluse_lock(master->bus);
+	mutex_lock(&dev->ibi_lock);
+	if (dev->ibi) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	ibi = kzalloc(sizeof(*ibi), GFP_KERNEL);
+	if (!ibi) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	atomic_set(&ibi->pending_ibis, 0);
+	init_completion(&ibi->all_ibis_handled);
+	ibi->handler = req->handler;
+	ibi->max_payload_len = req->max_payload_len;
+
+	dev->ibi = ibi;
+	ret = master->ops->request_ibi(dev, req);
+	if (ret) {
+		kfree(ibi);
+		dev->ibi = NULL;
+	}
+
+out:
+	mutex_unlock(&dev->ibi_lock);
+	i3c_bus_normaluse_unlock(master->bus);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(i3c_device_request_ibi);
+
+/**
+ * i3c_device_free_ibi() - Free all resources needed for IBI handling
+ * @dev: device on which you want to release IBI resources
+ *
+ * This function is responsible for de-allocating resources previously
+ * allocated by i3c_device_request_ibi(). It should be called after disabling
+ * IBIs with i3c_device_disable_ibi().
+ */
+void i3c_device_free_ibi(struct i3c_device *dev)
+{
+	struct i3c_master_controller *master = i3c_device_get_master(dev);
+
+	i3c_bus_normaluse_lock(master->bus);
+	mutex_lock(&dev->ibi_lock);
+	if (!dev->ibi)
+		goto out;
+
+	if (WARN_ON(dev->ibi->enabled))
+		BUG_ON(i3c_device_disable_ibi(dev));
+
+	master->ops->free_ibi(dev);
+	kfree(dev->ibi);
+	dev->ibi = NULL;
+
+out:
+	mutex_unlock(&dev->ibi_lock);
+	i3c_bus_normaluse_unlock(master->bus);
+}
+EXPORT_SYMBOL_GPL(i3c_device_free_ibi);
+
+/**
+ * i3cdev_to_dev() - Returns the device embedded in @i3cdev
+ * @i3cdev: I3C device
+ *
+ * Return: a pointer to a device object.
+ */
+struct device *i3cdev_to_dev(struct i3c_device *i3cdev)
+{
+	return &i3cdev->dev;
+}
+EXPORT_SYMBOL_GPL(i3cdev_to_dev);
+
+/**
+ * dev_to_i3cdev() - Returns the I3C device containing @dev
+ * @dev: device object
+ *
+ * Return: a pointer to an I3C device object.
+ */
+struct i3c_device *dev_to_i3cdev(struct device *dev)
+{
+	return container_of(dev, struct i3c_device, dev);
+}
+EXPORT_SYMBOL_GPL(dev_to_i3cdev);
+
+/**
+ * i3c_driver_register_with_owner() - register an I3C device driver
+ *
+ * @drv: driver to register
+ * @owner: module that owns this driver
+ *
+ * Register @drv to the core.
+ *
+ * Return: 0 in case of success, a negative error core otherwise.
+ */
+int i3c_driver_register_with_owner(struct i3c_driver *drv, struct module *owner)
+{
+	drv->driver.owner = owner;
+	drv->driver.bus = &i3c_bus_type;
+
+	return driver_register(&drv->driver);
+}
+EXPORT_SYMBOL_GPL(i3c_driver_register_with_owner);
+
+/**
+ * i3c_driver_unregister() - unregister an I3C device driver
+ *
+ * @drv: driver to unregister
+ *
+ * Unregister @drv.
+ */
+void i3c_driver_unregister(struct i3c_driver *drv)
+{
+	driver_unregister(&drv->driver);
+}
+EXPORT_SYMBOL_GPL(i3c_driver_unregister);
diff --git a/drivers/i3c/internals.h b/drivers/i3c/internals.h
new file mode 100644
index 000000000000..155e1145357a
--- /dev/null
+++ b/drivers/i3c/internals.h
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Cadence Design Systems Inc.
+ *
+ * Author: Boris Brezillon <boris.brezillon@bootlin.com>
+ */
+
+#ifndef I3C_INTERNALS_H
+#define I3C_INTERNALS_H
+
+#include <linux/i3c/master.h>
+
+extern struct bus_type i3c_bus_type;
+extern const struct device_type i3c_master_type;
+extern const struct device_type i3c_device_type;
+
+void i3c_bus_unref(struct i3c_bus *bus);
+struct i3c_bus *i3c_bus_create(struct device *parent);
+void i3c_bus_unregister(struct i3c_bus *bus);
+int i3c_bus_register(struct i3c_bus *i3cbus);
+int i3c_bus_get_free_addr(struct i3c_bus *bus, u8 start_addr);
+bool i3c_bus_dev_addr_is_avail(struct i3c_bus *bus, u8 addr);
+void i3c_bus_set_addr_slot_status(struct i3c_bus *bus, u16 addr,
+				  enum i3c_addr_slot_status status);
+enum i3c_addr_slot_status i3c_bus_get_addr_slot_status(struct i3c_bus *bus,
+						       u16 addr);
+
+#endif /* I3C_INTERNAL_H */
diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
new file mode 100644
index 000000000000..81a91b1cf98c
--- /dev/null
+++ b/drivers/i3c/master.c
@@ -0,0 +1,1723 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Cadence Design Systems Inc.
+ *
+ * Author: Boris Brezillon <boris.brezillon@bootlin.com>
+ */
+
+#include <linux/atomic.h>
+#include <linux/bug.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+
+#include "internals.h"
+
+static struct i3c_master_controller *
+i2c_adapter_to_i3c_master(struct i2c_adapter *adap)
+{
+	return container_of(adap, struct i3c_master_controller, i2c);
+}
+
+static struct i2c_adapter *
+i3c_master_to_i2c_adapter(struct i3c_master_controller *master)
+{
+	return &master->i2c;
+}
+
+static struct i2c_device *
+i3c_master_alloc_i2c_dev(struct i3c_master_controller *master,
+			 const struct i2c_board_info *info, u8 lvr)
+{
+	struct i2c_device *dev;
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return ERR_PTR(-ENOMEM);
+
+	dev->common.bus = master->bus;
+	dev->info = *info;
+	dev->lvr = lvr;
+	dev->info.of_node = of_node_get(info->of_node);
+	i3c_bus_set_addr_slot_status(master->bus, info->addr,
+				     I3C_ADDR_SLOT_I2C_DEV);
+
+	return dev;
+}
+
+static int i3c_master_send_ccc_cmd_locked(struct i3c_master_controller *master,
+					  struct i3c_ccc_cmd *cmd)
+{
+	if (!cmd || !master)
+		return -EINVAL;
+
+	if (WARN_ON(master->init_done &&
+		    !rwsem_is_locked(&master->bus->lock)))
+		return -EINVAL;
+
+	if (!master->ops->send_ccc_cmd)
+		return -ENOTSUPP;
+
+	if ((cmd->id & I3C_CCC_DIRECT) && (!cmd->dests || !cmd->ndests))
+		return -EINVAL;
+
+	if (master->ops->supports_ccc_cmd &&
+	    !master->ops->supports_ccc_cmd(master, cmd))
+		return -ENOTSUPP;
+
+	return master->ops->send_ccc_cmd(master, cmd);
+}
+
+static struct i2c_device *
+i3c_master_find_i2c_dev_by_addr(const struct i3c_master_controller *master,
+				u16 addr)
+{
+	struct i2c_device *dev;
+
+	i3c_bus_for_each_i2cdev(master->bus, dev) {
+		if (dev->client->addr == addr)
+			return dev;
+	}
+
+	return NULL;
+}
+
+/**
+ * i3c_master_get_free_addr() - get a free address on the bus
+ * @master: I3C master object
+ * @start_addr: where to start searching
+ *
+ * This function must be called with the bus lock held in write mode.
+ *
+ * Return: the first free address starting at @start_addr (included) or -ENOMEM
+ * if there's no more address available.
+ */
+int i3c_master_get_free_addr(struct i3c_master_controller *master,
+			     u8 start_addr)
+{
+	return i3c_bus_get_free_addr(master->bus, start_addr);
+}
+EXPORT_SYMBOL_GPL(i3c_master_get_free_addr);
+
+static void i3c_device_release(struct device *dev)
+{
+	struct i3c_device *i3cdev = dev_to_i3cdev(dev);
+
+	if (i3cdev->info.static_addr)
+		i3c_bus_set_addr_slot_status(i3cdev->common.bus,
+					     i3cdev->info.static_addr,
+					     I3C_ADDR_SLOT_FREE);
+
+	if (i3cdev->info.dyn_addr)
+		i3c_bus_set_addr_slot_status(i3cdev->common.bus,
+					     i3cdev->info.dyn_addr,
+					     I3C_ADDR_SLOT_FREE);
+
+	of_node_put(dev->of_node);
+	kfree(i3cdev);
+}
+
+static struct i3c_device *
+i3c_master_alloc_i3c_dev(struct i3c_master_controller *master,
+			 const struct i3c_device_info *info,
+			 const struct device_type *devtype)
+{
+	struct i3c_device *dev;
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return ERR_PTR(-ENOMEM);
+
+	dev->common.bus = master->bus;
+	dev->dev.parent = &master->bus->dev;
+	dev->dev.type = devtype;
+	dev->dev.bus = &i3c_bus_type;
+	dev->dev.release = i3c_device_release;
+	dev->info = *info;
+	mutex_init(&dev->ibi_lock);
+	dev_set_name(&dev->dev, "%d-%llx", master->bus->id, info->pid);
+
+	device_initialize(&dev->dev);
+
+	if (info->static_addr)
+		i3c_bus_set_addr_slot_status(master->bus, info->static_addr,
+					     I3C_ADDR_SLOT_I3C_DEV);
+
+	if (info->dyn_addr)
+		i3c_bus_set_addr_slot_status(master->bus, info->dyn_addr,
+					     I3C_ADDR_SLOT_I3C_DEV);
+
+	return dev;
+}
+
+/**
+ * i3c_master_set_info() - set master device information
+ * @master: master used to send frames on the bus
+ * @info: I3C device information
+ *
+ * Set master device info. This should be called from
+ * &i3c_master_controller_ops->bus_init().
+ *
+ * Not all &i3c_device_info fields are meaningful for a master device.
+ * Here is a list of fields that should be properly filled:
+ *
+ * - &i3c_device_info->dyn_addr
+ * - &i3c_device_info->bcr
+ * - &i3c_device_info->dcr
+ * - &i3c_device_info->pid
+ * - &i3c_device_info->hdr_cap if %I3C_BCR_HDR_CAP bit is set in
+ *   &i3c_device_info->bcr
+ *
+ * This function must be called with the bus lock held in maintenance mode.
+ *
+ * Return: 0 if @info contains valid information (not every piece of
+ * information can be checked, but we can at least make sure @info->dyn_addr
+ * and @info->bcr are correct), -EINVAL otherwise.
+ */
+int i3c_master_set_info(struct i3c_master_controller *master,
+			const struct i3c_device_info *info)
+{
+	struct i3c_device *i3cdev;
+
+	if (!i3c_bus_dev_addr_is_avail(master->bus, info->dyn_addr))
+		return -EINVAL;
+
+	if (I3C_BCR_DEVICE_ROLE(info->bcr) == I3C_BCR_I3C_MASTER &&
+	    master->secondary)
+		return -EINVAL;
+
+	if (master->this)
+		return -EINVAL;
+
+	i3cdev = i3c_master_alloc_i3c_dev(master, info,	&i3c_master_type);
+	if (IS_ERR(i3cdev))
+		return PTR_ERR(i3cdev);
+
+	master->this = i3cdev;
+	master->bus->cur_master = master->this;
+	i3cdev->common.bus = master->bus;
+	i3cdev->common.master = master;
+	list_add_tail(&i3cdev->common.node, &master->bus->devs.i3c);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(i3c_master_set_info);
+
+static int i3c_master_rstdaa_locked(struct i3c_master_controller *master,
+				    u8 addr)
+{
+	struct i3c_ccc_cmd_dest dest = { };
+	struct i3c_ccc_cmd cmd = { };
+	enum i3c_addr_slot_status addrstat;
+	int ret;
+
+	if (!master)
+		return -EINVAL;
+
+	addrstat = i3c_bus_get_addr_slot_status(master->bus, addr);
+	if (addr != I3C_BROADCAST_ADDR && addrstat != I3C_ADDR_SLOT_I3C_DEV)
+		return -EINVAL;
+
+	dest.addr = addr;
+	cmd.dests = &dest;
+	cmd.ndests = 1;
+	cmd.rnw = false;
+	cmd.id = I3C_CCC_RSTDAA(addr == I3C_BROADCAST_ADDR);
+
+	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+/**
+ * i3c_master_entdaa_locked() - start a DAA (Dynamic Address Assignment)
+ *				procedure
+ * @master: master used to send frames on the bus
+ *
+ * Send a ENTDAA CCC command to start a DAA procedure.
+ *
+ * Note that this function only sends the ENTDAA CCC command, all the logic
+ * behind dynamic address assignment has to be handled in the I3C master
+ * driver.
+ *
+ * This function must be called with the bus lock held in write mode.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int i3c_master_entdaa_locked(struct i3c_master_controller *master)
+{
+	struct i3c_ccc_cmd_dest dest = { };
+	struct i3c_ccc_cmd cmd = { };
+	int ret;
+
+	dest.addr = I3C_BROADCAST_ADDR;
+	cmd.dests = &dest;
+	cmd.ndests = 1;
+	cmd.rnw = false;
+	cmd.id = I3C_CCC_ENTDAA;
+
+	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(i3c_master_entdaa_locked);
+
+/**
+ * i3c_master_disec_locked() - send a DISEC CCC command
+ * @master: master used to send frames on the bus
+ * @addr: a valid I3C slave address or %I3C_BROADCAST_ADDR
+ * @evts: events to disable
+ *
+ * Send a DISEC CCC command to disable some or all events coming from a
+ * specific slave, or all devices if @addr is %I3C_BROADCAST_ADDR.
+ *
+ * This function must be called with the bus lock held in write mode.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int i3c_master_disec_locked(struct i3c_master_controller *master, u8 addr,
+			    u8 evts)
+{
+	struct i3c_ccc_events events = {
+		.events = evts,
+	};
+	struct i3c_ccc_cmd_dest dest = {
+		.addr = addr,
+		.payload.len = sizeof(events),
+		.payload.data = &events,
+	};
+	struct i3c_ccc_cmd cmd = {
+		.id = I3C_CCC_DISEC(addr == I3C_BROADCAST_ADDR),
+		.dests = &dest,
+		.ndests = 1,
+	};
+
+	return i3c_master_send_ccc_cmd_locked(master, &cmd);
+}
+EXPORT_SYMBOL_GPL(i3c_master_disec_locked);
+
+/**
+ * i3c_master_enec_locked() - send an ENEC CCC command
+ * @master: master used to send frames on the bus
+ * @addr: a valid I3C slave address or %I3C_BROADCAST_ADDR
+ * @evts: events to disable
+ *
+ * Sends an ENEC CCC command to enable some or all events coming from a
+ * specific slave, or all devices if @addr is %I3C_BROADCAST_ADDR.
+ *
+ * This function must be called with the bus lock held in write mode.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int i3c_master_enec_locked(struct i3c_master_controller *master, u8 addr,
+			   u8 evts)
+{
+	struct i3c_ccc_events events = {
+		.events = evts,
+	};
+	struct i3c_ccc_cmd_dest dest = {
+		.addr = addr,
+		.payload.len = sizeof(events),
+		.payload.data = &events,
+	};
+	struct i3c_ccc_cmd cmd = {
+		.id = I3C_CCC_ENEC(addr == I3C_BROADCAST_ADDR),
+		.dests = &dest,
+		.ndests = 1,
+	};
+
+	return i3c_master_send_ccc_cmd_locked(master, &cmd);
+}
+EXPORT_SYMBOL_GPL(i3c_master_enec_locked);
+
+/**
+ * i3c_master_defslvs_locked() - send a DEFSLVS CCC command
+ * @master: master used to send frames on the bus
+ *
+ * Send a DEFSLVS CCC command containing all the devices known to the @master.
+ * This is useful when you have secondary masters on the bus to propagate
+ * device information.
+ *
+ * This should be called after all I3C devices have been discovered (in other
+ * words, after the DAA procedure has finished) and instantiated in
+ * i3c_master_controller_ops->bus_init().
+ * It should also be called if a master ACKed an Hot-Join request and assigned
+ * a dynamic address to the device joining the bus.
+ *
+ * This function must be called with the bus lock held in write mode.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int i3c_master_defslvs_locked(struct i3c_master_controller *master)
+{
+	struct i3c_ccc_cmd_dest dest = {
+		.addr = I3C_BROADCAST_ADDR,
+	};
+	struct i3c_ccc_cmd cmd = {
+		.id = I3C_CCC_DEFSLVS,
+		.dests = &dest,
+		.ndests = 1,
+	};
+	struct i3c_ccc_defslvs *defslvs;
+	struct i3c_ccc_dev_desc *desc;
+	struct i3c_device *i3cdev;
+	struct i2c_device *i2cdev;
+	struct i3c_bus *bus;
+	bool send = false;
+	int ndevs = 0, ret;
+
+	if (!master)
+		return -EINVAL;
+
+	bus = i3c_master_get_bus(master);
+	i3c_bus_for_each_i3cdev(bus, i3cdev) {
+		ndevs++;
+		if (I3C_BCR_DEVICE_ROLE(i3cdev->info.bcr) == I3C_BCR_I3C_MASTER)
+			send = true;
+	}
+
+	/* No other master on the bus, skip DEFSLVS. */
+	if (!send)
+		return 0;
+
+	i3c_bus_for_each_i2cdev(bus, i2cdev)
+		ndevs++;
+
+	dest.payload.len = sizeof(*defslvs) +
+			   ((ndevs - 1) * sizeof(struct i3c_ccc_dev_desc));
+	defslvs = kzalloc(dest.payload.len, GFP_KERNEL);
+	if (!defslvs)
+		return -ENOMEM;
+
+	dest.payload.data = defslvs;
+
+	defslvs->count = ndevs;
+	defslvs->master.bcr = master->this->info.bcr;
+	defslvs->master.dcr = master->this->info.dcr;
+	defslvs->master.dyn_addr = master->this->info.dyn_addr;
+	defslvs->master.static_addr = I3C_BROADCAST_ADDR;
+
+	desc = defslvs->slaves;
+	i3c_bus_for_each_i2cdev(bus, i2cdev) {
+		desc->lvr = i2cdev->lvr;
+		desc->static_addr = i2cdev->info.addr;
+		desc++;
+	}
+
+	i3c_bus_for_each_i3cdev(bus, i3cdev) {
+		/* Skip the I3C dev representing this master. */
+		if (i3cdev == master->this)
+			continue;
+
+		desc->bcr = i3cdev->info.bcr;
+		desc->dcr = i3cdev->info.dcr;
+		desc->dyn_addr = i3cdev->info.dyn_addr;
+		desc->static_addr = i3cdev->info.static_addr;
+		desc++;
+	}
+
+	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
+	kfree(defslvs);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(i3c_master_defslvs_locked);
+
+static int i3c_master_setdasa_locked(struct i3c_master_controller *master,
+				     u8 static_addr, u8 dyn_addr)
+{
+	struct i3c_ccc_setda setda = {
+		.addr = dyn_addr << 1,
+	};
+	struct i3c_ccc_cmd_dest dest = {
+		.addr = static_addr,
+		.payload.len = sizeof(setda),
+		.payload.data = &setda,
+	};
+	struct i3c_ccc_cmd cmd = {
+		.rnw = false,
+		.id = I3C_CCC_SETDASA,
+		.dests = &dest,
+		.ndests = 1,
+	};
+
+	if (!dyn_addr || !static_addr)
+		return -EINVAL;
+
+	return i3c_master_send_ccc_cmd_locked(master, &cmd);
+}
+
+static int i3c_master_setnewda_locked(struct i3c_master_controller *master,
+				      u8 oldaddr, u8 newaddr)
+{
+	struct i3c_ccc_setda setda = {
+		.addr = newaddr << 1,
+	};
+	struct i3c_ccc_cmd_dest dest = {
+		.addr = oldaddr,
+		.payload.len = sizeof(setda),
+		.payload.data = &setda,
+	};
+	struct i3c_ccc_cmd cmd = {
+		.rnw = false,
+		.id = I3C_CCC_SETNEWDA,
+		.dests = &dest,
+		.ndests = 1,
+	};
+
+	if (!oldaddr || !newaddr)
+		return -EINVAL;
+
+	return i3c_master_send_ccc_cmd_locked(master, &cmd);
+}
+
+static int i3c_master_getmrl_locked(struct i3c_master_controller *master,
+				    struct i3c_device_info *info)
+{
+	struct i3c_ccc_mrl mrl;
+	struct i3c_ccc_cmd_dest dest = {
+		.addr = info->dyn_addr,
+		.payload.len = sizeof(mrl),
+		.payload.data = &mrl,
+	};
+	struct i3c_ccc_cmd cmd = {
+		.rnw = true,
+		.id = I3C_CCC_GETMRL,
+		.dests = &dest,
+		.ndests = 1,
+	};
+	int ret;
+
+	/*
+	 * When the device does not have IBI payload GETMRL only returns 2
+	 * bytes of data.
+	 */
+	if (!(info->bcr & I3C_BCR_IBI_PAYLOAD))
+		dest.payload.len -= 1;
+
+	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
+	if (ret)
+		return ret;
+
+	if (dest.payload.len != sizeof(mrl))
+		return -EIO;
+
+	info->max_read_len = be16_to_cpu(mrl.read_len);
+
+	if (info->bcr & I3C_BCR_IBI_PAYLOAD)
+		info->max_ibi_len = mrl.ibi_len;
+
+	return 0;
+}
+
+static int i3c_master_getmwl_locked(struct i3c_master_controller *master,
+				    struct i3c_device_info *info)
+{
+	struct i3c_ccc_mwl mwl;
+	struct i3c_ccc_cmd_dest dest = {
+		.addr = info->dyn_addr,
+		.payload.len = sizeof(mwl),
+		.payload.data = &mwl,
+	};
+	struct i3c_ccc_cmd cmd = {
+		.rnw = true,
+		.id = I3C_CCC_GETMWL,
+		.dests = &dest,
+		.ndests = 1,
+	};
+	int ret;
+
+	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
+	if (ret)
+		return ret;
+
+	if (dest.payload.len != sizeof(mwl))
+		return -EIO;
+
+	info->max_write_len = be16_to_cpu(mwl.len);
+
+	return 0;
+}
+
+static int i3c_master_getmxds_locked(struct i3c_master_controller *master,
+				     struct i3c_device_info *info)
+{
+	struct i3c_ccc_getmxds getmaxds;
+	struct i3c_ccc_cmd_dest dest = {
+		.addr = info->dyn_addr,
+		.payload.len = sizeof(getmaxds),
+		.payload.data = &getmaxds,
+	};
+	struct i3c_ccc_cmd cmd = {
+		.rnw = true,
+		.id = I3C_CCC_GETMXDS,
+		.dests = &dest,
+		.ndests = 1,
+	};
+	int ret;
+
+	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
+	if (ret)
+		return ret;
+
+	if (dest.payload.len != 2 && dest.payload.len != 5)
+		return -EIO;
+
+	info->max_read_ds = getmaxds.maxrd;
+	info->max_read_ds = getmaxds.maxwr;
+	if (dest.payload.len == 5)
+		info->max_read_turnaround = getmaxds.maxrdturn[0] |
+					    ((u32)getmaxds.maxrdturn[1] << 8) |
+					    ((u32)getmaxds.maxrdturn[2] << 16);
+
+	return 0;
+}
+
+static int i3c_master_gethdrcap_locked(struct i3c_master_controller *master,
+				       struct i3c_device_info *info)
+{
+	struct i3c_ccc_gethdrcap gethdrcap;
+	struct i3c_ccc_cmd_dest dest = {
+		.addr = info->dyn_addr,
+		.payload.len = sizeof(gethdrcap),
+		.payload.data = &gethdrcap,
+	};
+	struct i3c_ccc_cmd cmd = {
+		.rnw = true,
+		.id = I3C_CCC_GETHDRCAP,
+		.dests = &dest,
+		.ndests = 1,
+	};
+	int ret;
+
+	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
+	if (ret)
+		return ret;
+
+	if (dest.payload.len != 1)
+		return -EIO;
+
+	info->hdr_cap = gethdrcap.modes;
+
+	return 0;
+}
+
+static int i3c_master_getpid_locked(struct i3c_master_controller *master,
+				    struct i3c_device_info *info)
+{
+	struct i3c_ccc_getpid getpid;
+	struct i3c_ccc_cmd_dest dest = {
+		.addr = info->dyn_addr,
+		.payload.len = sizeof(struct i3c_ccc_getpid),
+		.payload.data = &getpid,
+	};
+	struct i3c_ccc_cmd cmd = {
+		.rnw = true,
+		.id = I3C_CCC_GETPID,
+		.dests = &dest,
+		.ndests = 1,
+	};
+	int ret, i;
+
+	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
+	if (ret)
+		return ret;
+
+	info->pid = 0;
+	for (i = 0; i < sizeof(getpid.pid); i++) {
+		int sft = (sizeof(getpid.pid) - i - 1) * 8;
+
+		info->pid |= (u64)getpid.pid[i] << sft;
+	}
+
+	return 0;
+}
+
+static int i3c_master_getbcr_locked(struct i3c_master_controller *master,
+				    struct i3c_device_info *info)
+{
+	struct i3c_ccc_getbcr getbcr;
+	struct i3c_ccc_cmd_dest dest = {
+		.addr = info->dyn_addr,
+		.payload.len = sizeof(struct i3c_ccc_getbcr),
+		.payload.data = &getbcr,
+	};
+	struct i3c_ccc_cmd cmd = {
+		.rnw = true,
+		.id = I3C_CCC_GETBCR,
+		.dests = &dest,
+		.ndests = 1,
+	};
+	int ret;
+
+	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
+	if (ret)
+		return ret;
+
+	info->bcr = getbcr.bcr;
+
+	return 0;
+}
+
+static int i3c_master_getdcr_locked(struct i3c_master_controller *master,
+				    struct i3c_device_info *info)
+{
+	struct i3c_ccc_getdcr getdcr;
+	struct i3c_ccc_cmd_dest dest = {
+		.addr = info->dyn_addr,
+		.payload.len = sizeof(struct i3c_ccc_getdcr),
+		.payload.data = &getdcr,
+	};
+	struct i3c_ccc_cmd cmd = {
+		.rnw = true,
+		.id = I3C_CCC_GETDCR,
+		.dests = &dest,
+		.ndests = 1,
+	};
+	int ret;
+
+	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
+	if (ret)
+		return ret;
+
+	info->dcr = getdcr.dcr;
+
+	return 0;
+}
+
+static int i3c_master_retrieve_dev_info(struct i3c_master_controller *master,
+					struct i3c_device_info *info, u8 addr)
+{
+	enum i3c_addr_slot_status slot_status;
+	int ret;
+
+	if (!master || !info)
+		return -EINVAL;
+
+	memset(info, 0, sizeof(*info));
+	info->dyn_addr = addr;
+
+	slot_status = i3c_bus_get_addr_slot_status(master->bus,
+						   info->dyn_addr);
+	if (slot_status == I3C_ADDR_SLOT_RSVD ||
+	    slot_status == I3C_ADDR_SLOT_I2C_DEV)
+		return -EINVAL;
+
+	ret = i3c_master_getpid_locked(master, info);
+	if (ret)
+		return ret;
+
+	ret = i3c_master_getbcr_locked(master, info);
+	if (ret)
+		return ret;
+
+	ret = i3c_master_getdcr_locked(master, info);
+	if (ret)
+		return ret;
+
+	if (info->bcr & I3C_BCR_MAX_DATA_SPEED_LIM) {
+		ret = i3c_master_getmxds_locked(master, info);
+		if (ret)
+			return ret;
+	}
+
+	if (info->bcr & I3C_BCR_IBI_PAYLOAD)
+		info->max_ibi_len = 1;
+
+	i3c_master_getmrl_locked(master, info);
+	i3c_master_getmwl_locked(master, info);
+
+	if (info->bcr & I3C_BCR_HDR_CAP) {
+		ret = i3c_master_gethdrcap_locked(master, info);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int i3c_master_attach_i3c_dev(struct i3c_master_controller *master,
+				     struct i3c_device *dev)
+{
+	int ret;
+
+	/*
+	 * We don't attach devices to the controller until they are
+	 * addressable on the bus.
+	 */
+	if (!dev->info.static_addr && !dev->info.dyn_addr)
+		return 0;
+
+	dev->common.master = master;
+
+	/* Do not attach the master device itself. */
+	if (master->this == dev)
+		return 0;
+
+	if (!master->ops->attach_i3c_dev)
+		return 0;
+
+	ret = master->ops->attach_i3c_dev(dev);
+	if (ret)
+		dev->common.master = NULL;
+
+	return ret;
+}
+
+static void i3c_master_reattach_i3c_dev(struct i3c_device *dev,
+					u8 old_dyn_addr)
+{
+	struct i3c_master_controller *master = i3c_device_get_master(dev);
+
+	if (master->ops->reattach_i3c_dev)
+		master->ops->reattach_i3c_dev(dev, old_dyn_addr);
+
+	if (old_dyn_addr)
+		i3c_bus_set_addr_slot_status(master->bus, old_dyn_addr,
+					     I3C_ADDR_SLOT_FREE);
+}
+
+static void i3c_master_detach_i3c_dev(struct i3c_device *dev)
+{
+	struct i3c_master_controller *master = i3c_device_get_master(dev);
+
+	if (!master)
+		return;
+
+	/* Do not detach the master device itself. */
+	if (master->this == dev)
+		return;
+
+	if (master->ops->detach_i3c_dev)
+		master->ops->detach_i3c_dev(dev);
+
+	dev->common.master = NULL;
+}
+
+static int i3c_master_attach_i2c_dev(struct i3c_master_controller *master,
+				     struct i2c_device *dev)
+{
+	int ret;
+
+	dev->common.master = master;
+
+	if (!master->ops->attach_i2c_dev)
+		return 0;
+
+	ret = master->ops->attach_i2c_dev(dev);
+	if (ret)
+		dev->common.master = NULL;
+
+	return ret;
+}
+
+static void i3c_master_detach_i2c_dev(struct i2c_device *dev)
+{
+	struct i3c_master_controller *master = i2c_device_get_master(dev);
+
+	if (!master)
+		return;
+
+	if (master->ops->detach_i2c_dev)
+		master->ops->detach_i2c_dev(dev);
+
+	dev->common.master = NULL;
+}
+
+static void i3c_master_pre_assign_dyn_addr(struct i3c_device *dev)
+{
+	struct i3c_master_controller *master = i3c_device_get_master(dev);
+	struct i3c_device_info info;
+	int ret;
+
+	if (!dev->init_dyn_addr || !dev->info.static_addr ||
+	    dev->info.dyn_addr)
+		return;
+
+	ret = i3c_master_setdasa_locked(master, dev->info.static_addr,
+					dev->init_dyn_addr);
+	if (ret)
+		return;
+
+	ret = i3c_master_retrieve_dev_info(master, &info, dev->init_dyn_addr);
+	if (ret)
+		goto err_rstdaa;
+
+	dev->info = info;
+
+	i3c_master_reattach_i3c_dev(dev, 0);
+
+	return;
+
+err_rstdaa:
+	i3c_master_rstdaa_locked(master, dev->init_dyn_addr);
+}
+
+static void
+i3c_master_register_new_i3c_devs(struct i3c_master_controller *master)
+{
+	struct i3c_device *i3cdev;
+	int ret;
+
+	if (!master->init_done)
+		return;
+
+	i3c_bus_for_each_i3cdev(master->bus, i3cdev) {
+		if (i3cdev->regfailed || device_is_registered(&i3cdev->dev) ||
+		    !i3cdev->info.dyn_addr)
+			continue;
+
+		ret = device_add(&i3cdev->dev);
+		if (ret) {
+			dev_err(master->parent,
+				"Failed to add I3C device (err = %d)\n", ret);
+			i3cdev->regfailed = true;
+		}
+	}
+}
+
+/**
+ * i3c_master_do_daa() - do a DAA (Dynamic Address Assignment)
+ * @master: master doing the DAA
+ *
+ * This function is instantiating an I3C device object and adding it to the
+ * I3C device list. All device information are automatically retrieved using
+ * standard CCC commands.
+ *
+ * The I3C device object is returned in case the master wants to attach
+ * private data to it using i3c_device_set_master_data().
+ *
+ * This function must be called with the bus lock held in write mode.
+ *
+ * Return: a 0 in case of success, an negative error code otherwise.
+ */
+int i3c_master_do_daa(struct i3c_master_controller *master)
+{
+	int ret;
+
+	i3c_bus_maintenance_lock(master->bus);
+	ret = master->ops->do_daa(master);
+	i3c_bus_maintenance_unlock(master->bus);
+
+	if (ret)
+		return ret;
+
+	i3c_bus_normaluse_lock(master->bus);
+	i3c_master_register_new_i3c_devs(master);
+	i3c_bus_normaluse_unlock(master->bus);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(i3c_master_do_daa);
+
+/**
+ * i3c_master_bus_init() - initialize an I3C bus
+ * @master: main master initializing the bus
+ *
+ * This function is following all initialisation steps described in the I3C
+ * specification:
+ *
+ * 1/ Attach I2C and statically defined I3C devs to the master so that the
+ *    master can fill its internal device table appropriately
+ * 2/ Call master's ->bus_init() method to initialize the master controller.
+ *    That's usually where the bus mode is selected (pure bus or mixed
+ *    fast/slow bus)
+ * 3/ Instruct all devices on the bus to drop their dynamic address. This is
+ *    particularly important when the bus was previously configured by someone
+ *    else (for example the bootloader)
+ * 4/ Disable all slave events.
+ * 5/ Pre-assign dynamic addresses requested by the FW with SETDASA for I3C
+ *    devices that have a static address
+ * 6/ Do a DAA (Dynamic Address Assignment) to assign dynamic addresses to all
+ *    remaining I3C devices
+ *
+ * Once this is done, all I3C and I2C devices should be usable.
+ *
+ * Return: a 0 in case of success, an negative error code otherwise.
+ */
+static int i3c_master_bus_init(struct i3c_master_controller *master)
+{
+	struct i3c_device *i3cdev;
+	struct i2c_device *i2cdev;
+	int ret;
+
+	/*
+	 * First attach all devices with static definitions provided by the
+	 * FW.
+	 */
+	i3c_bus_for_each_i2cdev(master->bus, i2cdev) {
+		ret = i3c_master_attach_i2c_dev(master, i2cdev);
+		if (ret)
+			goto err_detach_devs;
+	}
+
+	i3c_bus_for_each_i3cdev(master->bus, i3cdev) {
+		ret = i3c_master_attach_i3c_dev(master, i3cdev);
+		if (ret)
+			goto err_detach_devs;
+	}
+
+	/*
+	 * Now execute the controller specific ->bus_init() routine, which
+	 * might configure its internal logic to match the bus limitations.
+	 */
+	ret = master->ops->bus_init(master);
+	if (ret)
+		goto err_detach_devs;
+
+	/*
+	 * The master device should have been instantiated in ->bus_init(),
+	 * complain if this was not the case.
+	 */
+	if (!master->this) {
+		dev_err(master->parent,
+			"master_set_info() was not called in ->bus_init()\n");
+		ret = -EINVAL;
+		goto err_bus_cleanup;
+	}
+
+	/*
+	 * Reset all dynamic address that may have been assigned before
+	 * (assigned by the bootloader for example).
+	 */
+	ret = i3c_master_rstdaa_locked(master, I3C_BROADCAST_ADDR);
+	if (ret)
+		goto err_bus_cleanup;
+
+	/* Disable all slave events before starting DAA. */
+	ret = i3c_master_disec_locked(master, I3C_BROADCAST_ADDR,
+				      I3C_CCC_EVENT_SIR | I3C_CCC_EVENT_MR |
+				      I3C_CCC_EVENT_HJ);
+	if (ret)
+		goto err_bus_cleanup;
+
+	/*
+	 * Pre-assign dynamic address and retrieve device information if
+	 * needed.
+	 */
+	i3c_bus_for_each_i3cdev(master->bus, i3cdev)
+		i3c_master_pre_assign_dyn_addr(i3cdev);
+
+	ret = i3c_master_do_daa(master);
+	if (ret)
+		goto err_rstdaa;
+
+	return 0;
+
+err_rstdaa:
+	i3c_master_rstdaa_locked(master, I3C_BROADCAST_ADDR);
+
+err_bus_cleanup:
+	if (master->ops->bus_cleanup)
+		master->ops->bus_cleanup(master);
+
+err_detach_devs:
+	i3c_bus_for_each_i3cdev(master->bus, i3cdev)
+		i3c_master_detach_i3c_dev(i3cdev);
+
+	i3c_bus_for_each_i2cdev(master->bus, i2cdev)
+		i3c_master_detach_i2c_dev(i2cdev);
+
+	return ret;
+}
+
+static void i3c_master_bus_cleanup(struct i3c_master_controller *master)
+{
+	struct i3c_device *i3cdev;
+	struct i2c_device *i2cdev;
+
+	if (master->ops->bus_cleanup)
+		master->ops->bus_cleanup(master);
+
+	i3c_bus_for_each_i3cdev(master->bus, i3cdev)
+		i3c_master_detach_i3c_dev(i3cdev);
+
+	i3c_bus_for_each_i2cdev(master->bus, i2cdev)
+		i3c_master_detach_i2c_dev(i2cdev);
+}
+
+static struct i3c_device *
+i3c_master_search_i3c_dev_by_pid(struct i3c_master_controller *master, u64 pid)
+{
+	struct i3c_device *i3cdev;
+
+	i3c_bus_for_each_i3cdev(master->bus, i3cdev) {
+		if (i3cdev->info.pid == pid)
+			return i3cdev;
+	}
+
+	return NULL;
+}
+
+/**
+ * i3c_master_add_i3c_dev_locked() - add an I3C slave to the bus
+ * @master: master used to send frames on the bus
+ * @addr: I3C slave dynamic address assigned to the device
+ *
+ * This function is instantiating an I3C device object and adding it to the
+ * I3C device list. All device information are automatically retrieved using
+ * standard CCC commands.
+ *
+ * The I3C device object is returned in case the master wants to attach
+ * private data to it using i3c_device_set_master_data().
+ *
+ * This function must be called with the bus lock held in write mode.
+ *
+ * Return: a 0 in case of success, an negative error code otherwise.
+ */
+int i3c_master_add_i3c_dev_locked(struct i3c_master_controller *master,
+				  u8 addr)
+{
+	u8 old_dyn_addr, expected_dyn_addr;
+	enum i3c_addr_slot_status status;
+	struct i3c_device *i3cdev;
+	struct i3c_device_info info;
+	int ret;
+
+	if (!master)
+		return -EINVAL;
+
+	status = i3c_bus_get_addr_slot_status(master->bus, addr);
+	if (status != I3C_ADDR_SLOT_FREE)
+		return -EINVAL;
+
+	ret = i3c_master_retrieve_dev_info(master, &info, addr);
+	if (ret)
+		return ret;
+
+	i3cdev = i3c_master_search_i3c_dev_by_pid(master, info.pid);
+	if (!i3cdev) {
+		i3cdev = i3c_master_alloc_i3c_dev(master, &info,
+						  &i3c_device_type);
+		if (IS_ERR(i3cdev))
+			return PTR_ERR(i3cdev);
+
+		list_add_tail(&i3cdev->common.node, &master->bus->devs.i3c);
+	}
+
+	old_dyn_addr = i3cdev->info.dyn_addr;
+	i3cdev->info.dyn_addr = addr;
+
+	if (!i3cdev->common.master) {
+		ret = i3c_master_attach_i3c_dev(master, i3cdev);
+		if (ret)
+			goto err_put_dev;
+	} else {
+		i3c_master_reattach_i3c_dev(i3cdev, old_dyn_addr);
+	}
+
+	/*
+	 * Depending on our previous state, the expected dynamic address might
+	 * differ:
+	 * - if the device already had a dynamic address assigned, let's try to
+	 *   re-apply this one
+	 * - if the device did not have a dynamic address and the firmware
+	 *   requested a specific address, pick this one
+	 * - in any other case, keep the address automatically assigned by the
+	 *   master
+	 */
+	if (old_dyn_addr)
+		expected_dyn_addr = old_dyn_addr;
+	else if (i3cdev->init_dyn_addr)
+		expected_dyn_addr = i3cdev->init_dyn_addr;
+	else
+		expected_dyn_addr = i3cdev->info.dyn_addr;
+
+	if (i3cdev->info.dyn_addr != expected_dyn_addr) {
+		/*
+		 * Try to apply the expected dynamic address. If it fails, keep
+		 * the address assigned by the master.
+		 */
+		ret = i3c_master_setnewda_locked(master,
+						 i3cdev->info.dyn_addr,
+						 expected_dyn_addr);
+		if (!ret) {
+			old_dyn_addr = i3cdev->info.dyn_addr;
+			i3cdev->info.dyn_addr = expected_dyn_addr;
+			i3c_master_reattach_i3c_dev(i3cdev, old_dyn_addr);
+		}
+	}
+
+	return 0;
+
+err_put_dev:
+	list_del(&i3cdev->common.node);
+	put_device(&i3cdev->dev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(i3c_master_add_i3c_dev_locked);
+
+#define OF_I3C_REG1_IS_I2C_DEV			BIT(31)
+
+static int of_i3c_master_add_i2c_dev(struct i3c_master_controller *master,
+				     struct device_node *node, u32 *reg)
+{
+	struct device *dev = master->parent;
+	struct i2c_board_info info = { };
+	struct i2c_device *i2cdev;
+	/* LVR is encoded in the lowest byte of reg[1]. */
+	u8 lvr = reg[1];
+	int ret;
+
+	ret = of_i2c_get_board_info(master->parent, node, &info);
+	if (ret)
+		return ret;
+
+	/*
+	 * We do not register the I2C device here, because the bus is not
+	 * necessarily ready to transmit I2C frames, and the I2C adapter has
+	 * not been registered yet.
+	 * This is done in i3c_master_i2c_adapter_init() once everything is
+	 * ready.
+	 */
+	i2cdev = i3c_master_alloc_i2c_dev(master, &info, lvr);
+	if (IS_ERR(i2cdev)) {
+		dev_err(dev, "Failed to allocate device %04x\n", info.addr);
+		return ret;
+	}
+
+	if (lvr & I3C_LVR_I2C_FM_MODE)
+		master->bus->scl_rate.i2c = I3C_BUS_I2C_FM_SCL_RATE;
+
+	list_add_tail(&i2cdev->common.node, &master->bus->devs.i2c);
+
+	return 0;
+}
+
+static int of_i3c_master_add_i3c_dev(struct i3c_master_controller *master,
+				     struct device_node *node, u32 *reg)
+{
+	struct i3c_device_info info = { };
+	enum i3c_addr_slot_status addrstatus;
+	struct i3c_device *i3cdev;
+	u32 init_dyn_addr = 0;
+
+	if (reg[0]) {
+		if (reg[0] > I3C_MAX_ADDR)
+			return -EINVAL;
+
+		addrstatus = i3c_bus_get_addr_slot_status(master->bus,
+								  reg[0]);
+		if (addrstatus != I3C_ADDR_SLOT_FREE)
+			return -EINVAL;
+	}
+
+	info.static_addr = reg[0];
+
+	if (!of_property_read_u32(node, "assigned-address", &init_dyn_addr)) {
+		if (init_dyn_addr > I3C_MAX_ADDR)
+			return -EINVAL;
+
+		addrstatus = i3c_bus_get_addr_slot_status(master->bus,
+							  init_dyn_addr);
+		if (addrstatus != I3C_ADDR_SLOT_FREE)
+			return -EINVAL;
+	}
+
+	info.pid = ((u64)reg[1] << 32) | reg[2];
+
+	if ((info.pid & GENMASK_ULL(63, 48)) ||
+	    I3C_PID_RND_LOWER_32BITS(info.pid))
+		return -EINVAL;
+
+	i3cdev = i3c_master_alloc_i3c_dev(master, &info, &i3c_device_type);
+	if (IS_ERR(i3cdev))
+		return PTR_ERR(i3cdev);
+
+	i3cdev->init_dyn_addr = init_dyn_addr;
+	i3cdev->dev.of_node = node;
+	list_add_tail(&i3cdev->common.node, &master->bus->devs.i3c);
+
+	return 0;
+}
+
+static int of_i3c_master_add_dev(struct i3c_master_controller *master,
+				 struct device_node *node)
+{
+	u32 reg[3];
+	int ret;
+
+	if (!master || !node)
+		return -EINVAL;
+
+	ret = of_property_read_u32_array(node, "reg", reg, ARRAY_SIZE(reg));
+	if (ret)
+		return ret;
+
+	if (reg[1] & OF_I3C_REG1_IS_I2C_DEV)
+		ret = of_i3c_master_add_i2c_dev(master, node, reg);
+	else
+		ret = of_i3c_master_add_i3c_dev(master, node, reg);
+
+	return ret;
+}
+
+static int of_populate_i3c_bus(struct i3c_master_controller *master)
+{
+	struct device *dev = &master->bus->dev;
+	struct device_node *i3cbus_np = dev->of_node;
+	struct device_node *node;
+	int ret;
+	u32 val;
+
+	if (!i3cbus_np)
+		return 0;
+
+	for_each_available_child_of_node(i3cbus_np, node) {
+		ret = of_i3c_master_add_dev(master, node);
+		if (ret)
+			return ret;
+	}
+
+	/*
+	 * The user might want to limit I2C and I3C speed in case some devices
+	 * on the bus are not supporting typical rates, or if the bus topology
+	 * prevents it from using max possible rate.
+	 */
+	if (!of_property_read_u32(i3cbus_np, "i2c-scl-hz", &val))
+		master->bus->scl_rate.i2c = val;
+
+	if (!of_property_read_u32(i3cbus_np, "i3c-scl-hz", &val))
+		master->bus->scl_rate.i3c = val;
+
+	return 0;
+}
+
+static int i3c_master_i2c_adapter_xfer(struct i2c_adapter *adap,
+				       struct i2c_msg *xfers, int nxfers)
+{
+	struct i3c_master_controller *master = i2c_adapter_to_i3c_master(adap);
+	struct i2c_device *dev;
+	int i, ret;
+	u16 addr;
+
+	if (!xfers || !master || nxfers <= 0)
+		return -EINVAL;
+
+	if (!master->ops->i2c_xfers)
+		return -ENOTSUPP;
+
+	/* Doing transfers to different devices is not supported. */
+	addr = xfers[0].addr;
+	for (i = 1; i < nxfers; i++) {
+		if (addr != xfers[i].addr)
+			return -ENOTSUPP;
+	}
+
+	i3c_bus_normaluse_lock(master->bus);
+	dev = i3c_master_find_i2c_dev_by_addr(master, addr);
+	if (!dev)
+		ret = -ENOENT;
+	else
+		ret = master->ops->i2c_xfers(dev, xfers, nxfers);
+	i3c_bus_normaluse_unlock(master->bus);
+
+	return ret ? ret : nxfers;
+}
+
+static u32 i3c_master_i2c_functionalities(struct i2c_adapter *adap)
+{
+	struct i3c_master_controller *master = i2c_adapter_to_i3c_master(adap);
+
+	return master->ops->i2c_funcs(master);
+}
+
+static const struct i2c_algorithm i3c_master_i2c_algo = {
+	.master_xfer = i3c_master_i2c_adapter_xfer,
+	.functionality = i3c_master_i2c_functionalities,
+};
+
+static int i3c_master_i2c_adapter_init(struct i3c_master_controller *master)
+{
+	struct i2c_adapter *adap = i3c_master_to_i2c_adapter(master);
+	struct i2c_device *i2cdev;
+	int ret;
+
+	adap->dev.parent = master->parent;
+	adap->owner = master->parent->driver->owner;
+	adap->algo = &i3c_master_i2c_algo;
+	strncpy(adap->name, dev_name(master->parent), sizeof(adap->name));
+
+	/* FIXME: Should we allow i3c masters to override these values? */
+	adap->timeout = 1000;
+	adap->retries = 3;
+
+	ret = i2c_add_adapter(adap);
+	if (ret)
+		return ret;
+
+	/*
+	 * We silently ignore failures here. The bus should keep working
+	 * correctly even if one or more i2c devices are not registered.
+	 */
+	i3c_bus_for_each_i2cdev(master->bus, i2cdev)
+		i2cdev->client = i2c_new_device(adap, &i2cdev->info);
+
+	return 0;
+}
+
+static void i3c_master_i2c_adapter_cleanup(struct i3c_master_controller *master)
+{
+	i2c_del_adapter(&master->i2c);
+}
+
+static void i3c_master_unregister_i3c_devs(struct i3c_master_controller *master)
+{
+	struct i3c_device *i3cdev;
+
+	i3c_bus_for_each_i3cdev(master->bus, i3cdev) {
+		if (device_is_registered(&i3cdev->dev))
+			device_del(&i3cdev->dev);
+	}
+}
+
+/**
+ * i3c_master_queue_ibi() - Queue an IBI
+ * @dev: the device this IBI is coming from
+ * @slot: the IBI slot used to store the payload
+ *
+ * Queue an IBI to the controller workqueue. The IBI handler attached to
+ * the dev will be called from a workqueue context.
+ */
+void i3c_master_queue_ibi(struct i3c_device *dev, struct i3c_ibi_slot *slot)
+{
+	atomic_inc(&dev->ibi->pending_ibis);
+	queue_work(dev->common.master->wq, &slot->work);
+}
+EXPORT_SYMBOL_GPL(i3c_master_queue_ibi);
+
+static void i3c_master_handle_ibi(struct work_struct *work)
+{
+	struct i3c_ibi_slot *slot = container_of(work, struct i3c_ibi_slot,
+						 work);
+	struct i3c_device *dev = slot->dev;
+	struct i3c_master_controller *master = i3c_device_get_master(dev);
+	struct i3c_ibi_payload payload;
+
+	payload.data = slot->data;
+	payload.len = slot->len;
+
+	dev->ibi->handler(dev, &payload);
+	master->ops->recycle_ibi_slot(dev, slot);
+	if (atomic_dec_and_test(&dev->ibi->pending_ibis))
+		complete(&dev->ibi->all_ibis_handled);
+}
+
+static void i3c_master_init_ibi_slot(struct i3c_device *dev,
+				     struct i3c_ibi_slot *slot)
+{
+	slot->dev = dev;
+	INIT_WORK(&slot->work, i3c_master_handle_ibi);
+}
+
+struct i3c_generic_ibi_slot {
+	struct list_head node;
+	struct i3c_ibi_slot base;
+};
+
+struct i3c_generic_ibi_pool {
+	spinlock_t lock;
+	unsigned int num_slots;
+	struct list_head free_slots;
+	struct list_head pending;
+};
+
+/**
+ * i3c_generic_ibi_free_pool() - Free a generic IBI pool
+ * @pool: the IBI pool to free
+ *
+ * Free all IBI slots allated by a generic IBI pool.
+ */
+void i3c_generic_ibi_free_pool(struct i3c_generic_ibi_pool *pool)
+{
+	struct i3c_generic_ibi_slot *slot;
+	unsigned int nslots = 0;
+
+	while (!list_empty(&pool->free_slots)) {
+		slot = list_first_entry(&pool->free_slots,
+					struct i3c_generic_ibi_slot, node);
+		list_del(&slot->node);
+		kfree(slot->base.data);
+		kfree(slot);
+		nslots++;
+	}
+
+	/*
+	 * If the number of freed slots is not equal to the number of allocated
+	 * slots we have a leak somewhere.
+	 */
+	WARN_ON(nslots != pool->num_slots);
+}
+EXPORT_SYMBOL_GPL(i3c_generic_ibi_free_pool);
+
+/**
+ * i3c_generic_ibi_alloc_pool() - Create a generic IBI pool
+ * @dev: the device this pool will be used for
+ * @req: IBI setup request describing what the device driver expects
+ *
+ * Create a generic IBI pool based on the information provided in @req.
+ *
+ * Return: a valid IBI pool in case of success, an ERR_PTR() otherwise.
+ */
+struct i3c_generic_ibi_pool *
+i3c_generic_ibi_alloc_pool(struct i3c_device *dev,
+			   const struct i3c_ibi_setup *req)
+{
+	struct i3c_generic_ibi_pool *pool;
+	struct i3c_generic_ibi_slot *slot;
+	unsigned int i;
+	int ret;
+
+	pool = kzalloc(sizeof(*pool), GFP_KERNEL);
+	if (!pool)
+		return ERR_PTR(-ENOMEM);
+
+	spin_lock_init(&pool->lock);
+	INIT_LIST_HEAD(&pool->free_slots);
+	INIT_LIST_HEAD(&pool->pending);
+
+	for (i = 0; i < req->num_slots; i++) {
+		slot = kzalloc(sizeof(*slot), GFP_KERNEL);
+		if (!slot)
+			return ERR_PTR(-ENOMEM);
+
+		i3c_master_init_ibi_slot(dev, &slot->base);
+
+		if (req->max_payload_len) {
+			slot->base.data = kzalloc(req->max_payload_len,
+						  GFP_KERNEL);
+			if (!slot->base.data) {
+				kfree(slot);
+				ret = -ENOMEM;
+				goto err_free_pool;
+			}
+		}
+
+		list_add_tail(&slot->node, &pool->free_slots);
+		pool->num_slots++;
+	}
+
+	return pool;
+
+err_free_pool:
+	i3c_generic_ibi_free_pool(pool);
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(i3c_generic_ibi_alloc_pool);
+
+/**
+ * i3c_generic_ibi_get_free_slot() - Get a free slot from a generic IBI pool
+ * @pool: the pool to query an IBI slot on
+ *
+ * Search for a free slot in a generic IBI pool.
+ * The slot should be returned to the pool using i3c_generic_ibi_recycle_slot()
+ * when it's no longer needed.
+ *
+ * Return: a pointer to a free slot, or NULL if there's no free slot available.
+ */
+struct i3c_ibi_slot *
+i3c_generic_ibi_get_free_slot(struct i3c_generic_ibi_pool *pool)
+{
+	struct i3c_generic_ibi_slot *slot;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pool->lock, flags);
+	slot = list_first_entry_or_null(&pool->free_slots,
+					struct i3c_generic_ibi_slot, node);
+	if (slot)
+		list_del(&slot->node);
+	spin_unlock_irqrestore(&pool->lock, flags);
+
+	return slot ? &slot->base : NULL;
+}
+EXPORT_SYMBOL_GPL(i3c_generic_ibi_get_free_slot);
+
+/**
+ * i3c_generic_ibi_recycle_slot() - Return a slot to a generic IBI pool
+ * @pool: the pool to return the IBI slot to
+ * @s: IBI slot to recycle
+ *
+ * Add an IBI slot back to its generic IBI pool. Should be called from the
+ * master driver struct_master_controller_ops->recycle_ibi() method.
+ */
+void i3c_generic_ibi_recycle_slot(struct i3c_generic_ibi_pool *pool,
+				  struct i3c_ibi_slot *s)
+{
+	struct i3c_generic_ibi_slot *slot;
+	unsigned long flags;
+
+	if (!s)
+		return;
+
+	slot = container_of(s, struct i3c_generic_ibi_slot, base);
+	spin_lock_irqsave(&pool->lock, flags);
+	list_add_tail(&slot->node, &pool->free_slots);
+	spin_unlock_irqrestore(&pool->lock, flags);
+}
+EXPORT_SYMBOL_GPL(i3c_generic_ibi_recycle_slot);
+
+static void i3c_master_destroy_bus(struct i3c_master_controller *master)
+{
+	i3c_bus_unregister(master->bus);
+}
+
+static int i3c_master_create_bus(struct i3c_master_controller *master)
+{
+	struct i3c_bus *i3cbus;
+	int ret;
+
+	i3cbus = i3c_bus_create(master->parent);
+	if (IS_ERR(i3cbus))
+		return PTR_ERR(i3cbus);
+
+	master->bus = i3cbus;
+
+	if (i3cbus->dev.of_node) {
+		ret = of_populate_i3c_bus(master);
+		if (ret)
+			goto err_destroy_bus;
+	}
+
+	ret = i3c_bus_register(i3cbus);
+	if (ret)
+		goto err_destroy_bus;
+
+	return 0;
+
+err_destroy_bus:
+	i3c_bus_unref(i3cbus);
+
+	return ret;
+}
+
+static int i3c_master_check_ops(const struct i3c_master_controller_ops *ops)
+{
+	if (!ops || !ops->bus_init || !ops->priv_xfers ||
+	    !ops->send_ccc_cmd || !ops->do_daa || !ops->i2c_xfers ||
+	    !ops->i2c_funcs)
+		return -EINVAL;
+
+	if (ops->request_ibi &&
+	    (!ops->enable_ibi || !ops->disable_ibi || !ops->free_ibi ||
+	     !ops->recycle_ibi_slot))
+		return -EINVAL;
+
+	return 0;
+}
+
+/**
+ * i3c_master_register() - register an I3C master
+ * @master: master used to send frames on the bus
+ * @parent: the parent device (the one that provides this I3C master
+ *	    controller)
+ * @ops: the master controller operations
+ * @secondary: true if you are registering a secondary master. Will return
+ *	       -ENOTSUPP if set to true since secondary masters are not yet
+ *	       supported
+ *
+ * This function takes care of everything for you:
+ *
+ * - creates and initializes the I3C bus
+ * - populates the bus with static I2C devs if @parent->of_node is not
+ *   NULL
+ * - registers all I3C devices added by the controller during bus
+ *   initialization
+ * - registers the I2C adapter and all I2C devices
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int i3c_master_register(struct i3c_master_controller *master,
+			struct device *parent,
+			const struct i3c_master_controller_ops *ops,
+			bool secondary)
+{
+	int ret;
+
+	/* We do not support secondary masters yet. */
+	if (secondary)
+		return -ENOTSUPP;
+
+	ret = i3c_master_check_ops(ops);
+	if (ret)
+		return ret;
+
+	master->parent = parent;
+	master->ops = ops;
+	master->secondary = secondary;
+
+	ret = i3c_master_create_bus(master);
+	if (ret)
+		return ret;
+
+	master->wq = alloc_workqueue("%s", 0, 0, dev_name(parent));
+	if (!master->wq) {
+		ret = -ENOMEM;
+		goto err_destroy_bus;
+	}
+
+	ret = i3c_master_bus_init(master);
+	if (ret)
+		goto err_destroy_wq;
+
+	/*
+	 * Expose our I3C bus as an I2C adapter so that I2C devices are exposed
+	 * through the I2C subsystem.
+	 */
+	ret = i3c_master_i2c_adapter_init(master);
+	if (ret)
+		goto err_cleanup_bus;
+
+	/*
+	 * We're done initializing the bus and the controller, we can now
+	 * register I3C devices dicovered during the initial DAA.
+	 */
+	master->init_done = true;
+	i3c_bus_normaluse_lock(master->bus);
+	i3c_master_register_new_i3c_devs(master);
+	i3c_bus_normaluse_unlock(master->bus);
+
+	return 0;
+
+err_cleanup_bus:
+	i3c_master_bus_cleanup(master);
+
+err_destroy_wq:
+	destroy_workqueue(master->wq);
+
+err_destroy_bus:
+	i3c_master_destroy_bus(master);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(i3c_master_register);
+
+/**
+ * i3c_master_unregister() - unregister an I3C master
+ * @master: master used to send frames on the bus
+ *
+ * Basically undo everything done in i3c_master_register().
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int i3c_master_unregister(struct i3c_master_controller *master)
+{
+	i3c_master_i2c_adapter_cleanup(master);
+	i3c_master_unregister_i3c_devs(master);
+	i3c_master_bus_cleanup(master);
+	destroy_workqueue(master->wq);
+	i3c_master_destroy_bus(master);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(i3c_master_unregister);
diff --git a/drivers/i3c/master/Kconfig b/drivers/i3c/master/Kconfig
new file mode 100644
index 000000000000..e69de29bb2d1
diff --git a/drivers/i3c/master/Makefile b/drivers/i3c/master/Makefile
new file mode 100644
index 000000000000..e69de29bb2d1
diff --git a/include/linux/i3c/ccc.h b/include/linux/i3c/ccc.h
new file mode 100644
index 000000000000..4d0712979ade
--- /dev/null
+++ b/include/linux/i3c/ccc.h
@@ -0,0 +1,382 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2017 Cadence Design Systems Inc.
+ *
+ * Author: Boris Brezillon <boris.brezillon@bootlin.com>
+ */
+
+#ifndef I3C_CCC_H
+#define I3C_CCC_H
+
+#include <linux/bitops.h>
+
+/* I3C CCC (Common Command Codes) related definitions */
+#define I3C_CCC_DIRECT			BIT(7)
+
+#define I3C_CCC_ID(id, broadcast)	\
+	((id) | ((broadcast) ? 0 : I3C_CCC_DIRECT))
+
+/* Commands valid in both broadcast and unicast modes */
+#define I3C_CCC_ENEC(broadcast)		I3C_CCC_ID(0x0, broadcast)
+#define I3C_CCC_DISEC(broadcast)	I3C_CCC_ID(0x1, broadcast)
+#define I3C_CCC_ENTAS(as, broadcast)	I3C_CCC_ID(0x2 + (as), broadcast)
+#define I3C_CCC_RSTDAA(broadcast)	I3C_CCC_ID(0x6, broadcast)
+#define I3C_CCC_SETMWL(broadcast)	I3C_CCC_ID(0x9, broadcast)
+#define I3C_CCC_SETMRL(broadcast)	I3C_CCC_ID(0xa, broadcast)
+#define I3C_CCC_SETXTIME(broadcast)	((broadcast) ? 0x28 : 0x98)
+#define I3C_CCC_VENDOR(id, broadcast)	((id) + ((broadcast) ? 0x61 : 0xe0))
+
+/* Broadcast-only commands */
+#define I3C_CCC_ENTDAA			I3C_CCC_ID(0x7, true)
+#define I3C_CCC_DEFSLVS			I3C_CCC_ID(0x8, true)
+#define I3C_CCC_ENTTM			I3C_CCC_ID(0xb, true)
+#define I3C_CCC_ENTHDR(x)		I3C_CCC_ID(0x20 + (x), true)
+
+/* Unicast-only commands */
+#define I3C_CCC_SETDASA			I3C_CCC_ID(0x7, false)
+#define I3C_CCC_SETNEWDA		I3C_CCC_ID(0x8, false)
+#define I3C_CCC_GETMWL			I3C_CCC_ID(0xb, false)
+#define I3C_CCC_GETMRL			I3C_CCC_ID(0xc, false)
+#define I3C_CCC_GETPID			I3C_CCC_ID(0xd, false)
+#define I3C_CCC_GETBCR			I3C_CCC_ID(0xe, false)
+#define I3C_CCC_GETDCR			I3C_CCC_ID(0xf, false)
+#define I3C_CCC_GETSTATUS		I3C_CCC_ID(0x10, false)
+#define I3C_CCC_GETACCMST		I3C_CCC_ID(0x11, false)
+#define I3C_CCC_SETBRGTGT		I3C_CCC_ID(0x13, false)
+#define I3C_CCC_GETMXDS			I3C_CCC_ID(0x14, false)
+#define I3C_CCC_GETHDRCAP		I3C_CCC_ID(0x15, false)
+#define I3C_CCC_GETXTIME		I3C_CCC_ID(0x19, false)
+
+#define I3C_CCC_EVENT_SIR		BIT(0)
+#define I3C_CCC_EVENT_MR		BIT(1)
+#define I3C_CCC_EVENT_HJ		BIT(3)
+
+/**
+ * struct i3c_ccc_events - payload passed to ENEC/DISEC CCC
+ *
+ * @events: bitmask of I3C_CCC_EVENT_xxx events.
+ *
+ * Depending on the CCC command, the specific events coming from all devices
+ * (broadcast version) or a specific device (unicast version) will be
+ * enabled (ENEC) or disabled (DISEC).
+ */
+struct i3c_ccc_events {
+	u8 events;
+} __packed;
+
+/**
+ * struct i3c_ccc_mwl - payload passed to SETMWL/GETMWL CCC
+ *
+ * @len: maximum write length in bytes
+ *
+ * The maximum write length is only applicable to SDR private messages or
+ * extended Write CCCs (like SETXTIME).
+ */
+struct i3c_ccc_mwl {
+	__be16 len;
+} __packed;
+
+/**
+ * struct i3c_ccc_mrl - payload passed to SETMRL/GETMRL CCC
+ *
+ * @len: maximum read length in bytes
+ * @ibi_len: maximum IBI payload length
+ *
+ * The maximum read length is only applicable to SDR private messages or
+ * extended Read CCCs (like GETXTIME).
+ * The IBI length is only valid if the I3C slave is IBI capable
+ * (%I3C_BCR_IBI_REQ_CAP is set).
+ */
+struct i3c_ccc_mrl {
+	__be16 read_len;
+	u8 ibi_len;
+} __packed;
+
+/**
+ * struct i3c_ccc_dev_desc - I3C/I2C device descriptor used for DEFSLVS
+ *
+ * @dyn_addr: dynamic address assigned to the I3C slave or 0 if the entry is
+ *	      describing an I2C slave.
+ * @dcr: DCR value (not applicable to entries describing I2C devices)
+ * @lvr: LVR value (not applicable to entries describing I3C devices)
+ * @bcr: BCR value or 0 if this entry is describing an I2C slave
+ * @static_addr: static address or 0 if the device does not have a static
+ *		 address
+ *
+ * The DEFSLVS command should be passed an array of i3c_ccc_dev_desc
+ * descriptors (one entry per I3C/I2C dev controlled by the master).
+ */
+struct i3c_ccc_dev_desc {
+	u8 dyn_addr;
+	union {
+		u8 dcr;
+		u8 lvr;
+	};
+	u8 bcr;
+	u8 static_addr;
+} __packed;
+
+/**
+ * struct i3c_ccc_defslvs - payload passed to DEFSLVS CCC
+ *
+ * @count: number of dev descriptors
+ * @master: descriptor describing the current master
+ * @slaves: array of descriptors describing slaves controlled by the
+ *	    current master
+ *
+ * Information passed to the broadcast DEFSLVS to propagate device
+ * information to all masters currently acting as slaves on the bus.
+ * This is only meaningful if you have more than one master.
+ */
+struct i3c_ccc_defslvs {
+	u8 count;
+	struct i3c_ccc_dev_desc master;
+	struct i3c_ccc_dev_desc slaves[0];
+} __packed;
+
+/**
+ * enum i3c_ccc_test_mode - enum listing all available test modes
+ *
+ * @I3C_CCC_EXIT_TEST_MODE: exit test mode
+ * @I3C_CCC_VENDOR_TEST_MODE: enter vendor test mode
+ */
+enum i3c_ccc_test_mode {
+	I3C_CCC_EXIT_TEST_MODE,
+	I3C_CCC_VENDOR_TEST_MODE,
+};
+
+/**
+ * struct i3c_ccc_enttm - payload passed to ENTTM CCC
+ *
+ * @mode: one of the &enum i3c_ccc_test_mode modes
+ *
+ * Information passed to the ENTTM CCC to instruct an I3C device to enter a
+ * specific test mode.
+ */
+struct i3c_ccc_enttm {
+	u8 mode;
+} __packed;
+
+/**
+ * struct i3c_ccc_setda - payload passed to SETNEWDA and SETDASA CCCs
+ *
+ * @addr: dynamic address to assign to an I3C device
+ *
+ * Information passed to the SETNEWDA and SETDASA CCCs to assign/change the
+ * dynamic address of an I3C device.
+ */
+struct i3c_ccc_setda {
+	u8 addr;
+} __packed;
+
+/**
+ * struct i3c_ccc_getpid - payload passed to GETPID CCC
+ *
+ * @pid: 48 bits PID in big endian
+ */
+struct i3c_ccc_getpid {
+	u8 pid[6];
+} __packed;
+
+/**
+ * struct i3c_ccc_getbcr - payload passed to GETBCR CCC
+ *
+ * @bcr: BCR (Bus Characteristic Register) value
+ */
+struct i3c_ccc_getbcr {
+	u8 bcr;
+} __packed;
+
+/**
+ * struct i3c_ccc_getdcr - payload passed to GETDCR CCC
+ *
+ * @dcr: DCR (Device Characteristic Register) value
+ */
+struct i3c_ccc_getdcr {
+	u8 dcr;
+} __packed;
+
+#define I3C_CCC_STATUS_PENDING_INT(status)	((status) & GENMASK(3, 0))
+#define I3C_CCC_STATUS_PROTOCOL_ERROR		BIT(5)
+#define I3C_CCC_STATUS_ACTIVITY_MODE(status)	\
+	(((status) & GENMASK(7, 6)) >> 6)
+
+/**
+ * struct i3c_ccc_getstatus - payload passed to GETSTATUS CCC
+ *
+ * @status: status of the I3C slave (see I3C_CCC_STATUS_xxx macros for more
+ *	    information).
+ */
+struct i3c_ccc_getstatus {
+	__be16 status;
+} __packed;
+
+/**
+ * struct i3c_ccc_getaccmst - payload passed to GETACCMST CCC
+ *
+ * @newmaster: address of the master taking bus ownership
+ */
+struct i3c_ccc_getaccmst {
+	u8 newmaster;
+} __packed;
+
+/**
+ * struct i3c_ccc_bridged_slave_desc - bridged slave descriptor
+ *
+ * @addr: dynamic address of the bridged device
+ * @id: ID of the slave device behind the bridge
+ */
+struct i3c_ccc_bridged_slave_desc {
+	u8 addr;
+	__be16 id;
+} __packed;
+
+/**
+ * struct i3c_ccc_setbrgtgt - payload passed to SETBRGTGT CCC
+ *
+ * @count: number of bridged slaves
+ * @bslaves: bridged slave descriptors
+ */
+struct i3c_ccc_setbrgtgt {
+	u8 count;
+	struct i3c_ccc_bridged_slave_desc bslaves[0];
+} __packed;
+
+/**
+ * enum i3c_sdr_max_data_rate - max data rate values for private SDR transfers
+ */
+enum i3c_sdr_max_data_rate {
+	I3C_SDR0_FSCL_MAX,
+	I3C_SDR1_FSCL_8MHZ,
+	I3C_SDR2_FSCL_6MHZ,
+	I3C_SDR3_FSCL_4MHZ,
+	I3C_SDR4_FSCL_2MHZ,
+};
+
+/**
+ * enum i3c_tsco - clock to data turn-around
+ */
+enum i3c_tsco {
+	I3C_TSCO_8NS,
+	I3C_TSCO_9NS,
+	I3C_TSCO_10NS,
+	I3C_TSCO_11NS,
+	I3C_TSCO_12NS,
+};
+
+#define I3C_CCC_MAX_SDR_FSCL_MASK	GENMASK(2, 0)
+#define I3C_CCC_MAX_SDR_FSCL(x)		((x) & I3C_CCC_MAX_SDR_FSCL_MASK)
+
+/**
+ * struct i3c_ccc_getmxds - payload passed to GETMXDS CCC
+ *
+ * @maxwr: write limitations
+ * @maxrd: read limitations
+ * @maxrdturn: maximum read turn-around expressed micro-seconds and
+ *	       little-endian formatted
+ */
+struct i3c_ccc_getmxds {
+	u8 maxwr;
+	u8 maxrd;
+	u8 maxrdturn[3];
+} __packed;
+
+#define I3C_CCC_HDR_MODE(mode)		BIT(mode)
+
+/**
+ * struct i3c_ccc_gethdrcap - payload passed to GETHDRCAP CCC
+ *
+ * @modes: bitmap of supported HDR modes
+ */
+struct i3c_ccc_gethdrcap {
+	u8 modes;
+} __packed;
+
+/**
+ * enum i3c_ccc_setxtime_subcmd - SETXTIME sub-commands
+ */
+enum i3c_ccc_setxtime_subcmd {
+	I3C_CCC_SETXTIME_ST = 0x7f,
+	I3C_CCC_SETXTIME_DT = 0xbf,
+	I3C_CCC_SETXTIME_ENTER_ASYNC_MODE0 = 0xdf,
+	I3C_CCC_SETXTIME_ENTER_ASYNC_MODE1 = 0xef,
+	I3C_CCC_SETXTIME_ENTER_ASYNC_MODE2 = 0xf7,
+	I3C_CCC_SETXTIME_ENTER_ASYNC_MODE3 = 0xfb,
+	I3C_CCC_SETXTIME_ASYNC_TRIGGER = 0xfd,
+	I3C_CCC_SETXTIME_TPH = 0x3f,
+	I3C_CCC_SETXTIME_TU = 0x9f,
+	I3C_CCC_SETXTIME_ODR = 0x8f,
+};
+
+/**
+ * struct i3c_ccc_setxtime - payload passed to SETXTIME CCC
+ *
+ * @subcmd: one of the sub-commands ddefined in &enum i3c_ccc_setxtime_subcmd
+ * @data: sub-command payload. Amount of data is determined by
+ *	  &i3c_ccc_setxtime->subcmd
+ */
+struct i3c_ccc_setxtime {
+	u8 subcmd;
+	u8 data[0];
+} __packed;
+
+#define I3C_CCC_GETXTIME_SYNC_MODE	BIT(0)
+#define I3C_CCC_GETXTIME_ASYNC_MODE(x)	BIT((x) + 1)
+#define I3C_CCC_GETXTIME_OVERFLOW	BIT(7)
+
+/**
+ * struct i3c_ccc_getxtime - payload retrieved from GETXTIME CCC
+ *
+ * @supported_modes: bitmap describing supported XTIME modes
+ * @state: current status (enabled mode and overflow status)
+ * @frequency: slave's internal oscillator frequency in 500KHz steps
+ * @inaccuracy: slave's internal oscillator inaccuracy in 0.1% steps
+ */
+struct i3c_ccc_getxtime {
+	u8 supported_modes;
+	u8 state;
+	u8 frequency;
+	u8 inaccuracy;
+} __packed;
+
+/**
+ * struct i3c_ccc_cmd_payload - CCC payload
+ *
+ * @len: payload length
+ * @data: payload data
+ */
+struct i3c_ccc_cmd_payload {
+	u16 len;
+	void *data;
+};
+
+/**
+ * struct i3c_ccc_cmd_dest - CCC command destination
+ *
+ * @addr: can be an I3C device address or the broadcast address if this is a
+ *	  broadcast CCC
+ * @payload: payload to be sent to this device or broadcasted
+ */
+struct i3c_ccc_cmd_dest {
+	u8 addr;
+	struct i3c_ccc_cmd_payload payload;
+};
+
+/**
+ * struct i3c_ccc_cmd - CCC command
+ *
+ * @rnw: true if the CCC should retrieve data from the device. Only valid for
+ *	 unicast commands
+ * @id: CCC command id
+ * @dests: array of destinations and associated payload for this CCC. Most of
+ *	   the time, only one destination is provided
+ * @ndests: number of destinations. Should always be one for broadcast commands
+ */
+struct i3c_ccc_cmd {
+	bool rnw;
+	u8 id;
+	struct i3c_ccc_cmd_dest *dests;
+	int ndests;
+};
+
+#endif /* I3C_CCC_H */
diff --git a/include/linux/i3c/device.h b/include/linux/i3c/device.h
new file mode 100644
index 000000000000..411b13ceda9f
--- /dev/null
+++ b/include/linux/i3c/device.h
@@ -0,0 +1,305 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2017 Cadence Design Systems Inc.
+ *
+ * Author: Boris Brezillon <boris.brezillon@bootlin.com>
+ */
+
+#ifndef I3C_DEV_H
+#define I3C_DEV_H
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/kconfig.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+
+/**
+ * enum i3c_hdr_mode - HDR mode ids
+ * @I3C_HDR_DDR: DDR mode
+ * @I3C_HDR_TSP: TSP mode
+ * @I3C_HDR_TSL: TSL mode
+ */
+enum i3c_hdr_mode {
+	I3C_HDR_DDR,
+	I3C_HDR_TSP,
+	I3C_HDR_TSL,
+};
+
+/**
+ * struct i3c_priv_xfer - I3C SDR private transfer
+ * @rnw: encodes the transfer direction. true for a read, false for a write
+ * @len: transfer length in bytes of the transfer
+ * @data: input/output buffer
+ */
+struct i3c_priv_xfer {
+	bool rnw;
+	u16 len;
+	union {
+		void *in;
+		const void *out;
+	} data;
+};
+
+/**
+ * enum i3c_dcr - I3C DCR values
+ * @I3C_DCR_GENERIC_DEVICE: generic I3C device
+ */
+enum i3c_dcr {
+	I3C_DCR_GENERIC_DEVICE = 0,
+};
+
+#define I3C_PID_MANUF_ID(pid)		(((pid) & GENMASK_ULL(47, 33)) >> 33)
+#define I3C_PID_RND_LOWER_32BITS(pid)	(!!((pid) & BIT_ULL(32)))
+#define I3C_PID_RND_VAL(pid)		((pid) & GENMASK_ULL(31, 0))
+#define I3C_PID_PART_ID(pid)		(((pid) & GENMASK_ULL(31, 16)) >> 16)
+#define I3C_PID_INSTANCE_ID(pid)	(((pid) & GENMASK_ULL(15, 12)) >> 12)
+#define I3C_PID_EXTRA_INFO(pid)		((pid) & GENMASK_ULL(11, 0))
+
+#define I3C_BCR_DEVICE_ROLE(bcr)	((bcr) & GENMASK(7, 6))
+#define I3C_BCR_I3C_SLAVE		(0 << 6)
+#define I3C_BCR_I3C_MASTER		(1 << 6)
+#define I3C_BCR_HDR_CAP			BIT(5)
+#define I3C_BCR_BRIDGE			BIT(4)
+#define I3C_BCR_OFFLINE_CAP		BIT(3)
+#define I3C_BCR_IBI_PAYLOAD		BIT(2)
+#define I3C_BCR_IBI_REQ_CAP		BIT(1)
+#define I3C_BCR_MAX_DATA_SPEED_LIM	BIT(0)
+
+/**
+ * struct i3c_device_info - I3C device information
+ * @pid: Provisional ID
+ * @bcr: Bus Characteristic Register
+ * @dcr: Device Characteristic Register
+ * @static_addr: static/I2C address
+ * @dyn_addr: dynamic address
+ * @hdr_cap: supported HDR modes
+ * @max_read_ds: max read speed information
+ * @max_write_ds: max write speed information
+ * @max_ibi_len: max IBI payload length
+ * @max_read_turnaround: max read turn-around time in micro-seconds
+ * @max_read_len: max private SDR read length in bytes
+ * @max_write_len: max private SDR write length in bytes
+ *
+ * These are all basic information that should be advertised by an I3C device.
+ * Some of them are optional depending on the device type and device
+ * capabilities.
+ * For each I3C slave attached to a master with
+ * i3c_master_add_i3c_dev_locked(), the core will send the relevant CCC command
+ * to retrieve these data.
+ */
+struct i3c_device_info {
+	u64 pid;
+	u8 bcr;
+	u8 dcr;
+	u8 static_addr;
+	u8 dyn_addr;
+	u8 hdr_cap;
+	u8 max_read_ds;
+	u8 max_write_ds;
+	u8 max_ibi_len;
+	u32 max_read_turnaround;
+	u16 max_read_len;
+	u16 max_write_len;
+};
+
+/*
+ * I3C device internals are kept hidden from I3C device users. It's just
+ * simpler to refactor things when everything goes through getter/setters, and
+ * I3C device drivers should not have to worry about internal representation
+ * anyway.
+ */
+struct i3c_device;
+
+/* These macros should be used to i3c_device_id entries. */
+#define I3C_MATCH_MANUF_AND_PART (I3C_MATCH_MANUF | I3C_MATCH_PART)
+
+#define I3C_DEVICE(_manufid, _partid, _drvdata)				\
+	{								\
+		.match_flags = I3C_MATCH_MANUF_AND_PART,		\
+		.manuf_id = _manufid,					\
+		.part_id = _partid,					\
+		.data = _drvdata,					\
+	}
+
+#define I3C_DEVICE_EXTRA_INFO(_manufid, _partid, _info, _drvdata)	\
+	{								\
+		.match_flags = I3C_MATCH_MANUF_AND_PART |		\
+			       I3C_MATCH_EXTRA_INFO,			\
+		.manuf_id = _manufid,					\
+		.part_id = _partid,					\
+		.extra_info = _info,					\
+		.data = _drvdata,					\
+	}
+
+#define I3C_CLASS(_dcr, _drvdata)					\
+	{								\
+		.match_flags = I3C_MATCH_DCR,				\
+		.dcr = _dcr,						\
+	}
+
+/**
+ * struct i3c_driver - I3C device driver
+ * @driver: inherit from device_driver
+ * @probe: I3C device probe method
+ * @remove: I3C device remove method
+ * @id_table: I3C device match table. Will be used by the framework to decide
+ *	      which device to bind to this driver
+ */
+struct i3c_driver {
+	struct device_driver driver;
+	int (*probe)(struct i3c_device *dev);
+	int (*remove)(struct i3c_device *dev);
+	const struct i3c_device_id *id_table;
+};
+
+static inline struct i3c_driver *drv_to_i3cdrv(struct device_driver *drv)
+{
+	return container_of(drv, struct i3c_driver, driver);
+}
+
+struct device *i3cdev_to_dev(struct i3c_device *i3cdev);
+struct i3c_device *dev_to_i3cdev(struct device *dev);
+
+static inline void i3cdev_set_drvdata(struct i3c_device *i3cdev,
+				      void *data)
+{
+	struct device *dev = i3cdev_to_dev(i3cdev);
+
+	dev_set_drvdata(dev, data);
+}
+
+static inline void *i3cdev_get_drvdata(struct i3c_device *i3cdev)
+{
+	struct device *dev = i3cdev_to_dev(i3cdev);
+
+	return dev_get_drvdata(dev);
+}
+
+int i3c_driver_register_with_owner(struct i3c_driver *drv,
+				   struct module *owner);
+void i3c_driver_unregister(struct i3c_driver *drv);
+
+#define i3c_driver_register(__drv)		\
+	i3c_driver_register_with_owner(__drv, THIS_MODULE)
+
+/**
+ * module_i3c_driver() - Register a module providing an I3C driver
+ * @__drv: the I3C driver to register
+ *
+ * Provide generic init/exit functions that simply register/unregister an I3C
+ * driver.
+ * Should be used by any driver that does not require extra init/cleanup steps.
+ */
+#define module_i3c_driver(__drv)		\
+	module_driver(__drv, i3c_driver_register, i3c_driver_unregister)
+
+/**
+ * i3c_i2c_driver_register() - Register an i2c and an i3c driver
+ * @i3cdrv: the I3C driver to register
+ * @i2cdrv: the I2C driver to register
+ *
+ * This function registers both @i2cdev and @i3cdev, and fails if one of these
+ * registrations fails. This is mainly useful for devices that support both I2C
+ * and I3C modes.
+ * Note that when CONFIG_I3C is not enabled, this function only registers the
+ * I2C driver.
+ *
+ * Return: 0 if both registrations succeeds, a negative error code otherwise.
+ */
+static inline int i3c_i2c_driver_register(struct i3c_driver *i3cdrv,
+					  struct i2c_driver *i2cdrv)
+{
+	int ret;
+
+	ret = i2c_add_driver(i2cdrv);
+	if (ret || !IS_ENABLED(CONFIG_I3C))
+		return ret;
+
+	ret = i3c_driver_register(i3cdrv);
+	if (ret)
+		i2c_del_driver(i2cdrv);
+
+	return ret;
+}
+
+/**
+ * i3c_i2c_driver_unregister() - Unregister an i2c and an i3c driver
+ * @i3cdrv: the I3C driver to register
+ * @i2cdrv: the I2C driver to register
+ *
+ * This function unregisters both @i3cdrv and @i2cdrv.
+ * Note that when CONFIG_I3C is not enabled, this function only unregisters the
+ * @i2cdrv.
+ */
+static inline void i3c_i2c_driver_unregister(struct i3c_driver *i3cdrv,
+					     struct i2c_driver *i2cdrv)
+{
+	if (IS_ENABLED(CONFIG_I3C))
+		i3c_driver_unregister(i3cdrv);
+
+	i2c_del_driver(i2cdrv);
+}
+
+/**
+ * module_i3c_i2c_driver() - Register a module providing an I3C and an I2C
+ *			     driver
+ * @__i3cdrv: the I3C driver to register
+ * @__i2cdrv: the I3C driver to register
+ *
+ * Provide generic init/exit functions that simply register/unregister an I3C
+ * and an I2C driver.
+ * This macro can be used even if CONFIG_I3C is disabled, in this case, only
+ * the I2C driver will be registered.
+ * Should be used by any driver that does not require extra init/cleanup steps.
+ */
+#define module_i3c_i2c_driver(__i3cdrv, __i2cdrv)	\
+	module_driver(__i3cdrv,				\
+		      i3c_i2c_driver_register,		\
+		      i3c_i2c_driver_unregister)
+
+int i3c_device_do_priv_xfers(struct i3c_device *dev,
+			     struct i3c_priv_xfer *xfers,
+			     int nxfers);
+
+void i3c_device_get_info(struct i3c_device *dev, struct i3c_device_info *info);
+
+struct i3c_ibi_payload {
+	unsigned int len;
+	const void *data;
+};
+
+/**
+ * struct i3c_ibi_setup - IBI setup object
+ * @max_payload_len: maximum length of the payload associated to an IBI. If one
+ *		     IBI appears to have a payload that is bigger than this
+ *		     number, the IBI will be rejected.
+ * @num_slots: number of pre-allocated IBI slots. This should be chosen so that
+ *	       the system never runs out of IBI slots, otherwise you'll lose
+ *	       IBIs.
+ * @handler: IBI handler, every time an IBI is received. This handler is called
+ *	     in a workqueue context. It is allowed to sleep and send new
+ *	     messages on the bus, though it's recommended to keep the
+ *	     processing done there as fast as possible to avoid delaying
+ *	     processing of other queued on the same workqueue.
+ *
+ * Temporary structure used to pass information to i3c_device_request_ibi().
+ * This object can be allocated on the stack since i3c_device_request_ibi()
+ * copies every bit of information and do not use it after
+ * i3c_device_request_ibi() has returned.
+ */
+struct i3c_ibi_setup {
+	unsigned int max_payload_len;
+	unsigned int num_slots;
+	void (*handler)(struct i3c_device *dev,
+			const struct i3c_ibi_payload *payload);
+};
+
+int i3c_device_request_ibi(struct i3c_device *dev,
+			   const struct i3c_ibi_setup *setup);
+void i3c_device_free_ibi(struct i3c_device *dev);
+int i3c_device_enable_ibi(struct i3c_device *dev);
+int i3c_device_disable_ibi(struct i3c_device *dev);
+
+#endif /* I3C_DEV_H */
diff --git a/include/linux/i3c/master.h b/include/linux/i3c/master.h
new file mode 100644
index 000000000000..e1a5ce18780f
--- /dev/null
+++ b/include/linux/i3c/master.h
@@ -0,0 +1,587 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2017 Cadence Design Systems Inc.
+ *
+ * Author: Boris Brezillon <boris.brezillon@bootlin.com>
+ */
+
+#ifndef I3C_MASTER_H
+#define I3C_MASTER_H
+
+#include <asm/bitsperlong.h>
+
+#include <linux/bitops.h>
+#include <linux/i2c.h>
+#include <linux/i3c/ccc.h>
+#include <linux/i3c/device.h>
+#include <linux/rwsem.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+
+#define I3C_HOT_JOIN_ADDR		0x2
+#define I3C_BROADCAST_ADDR		0x7e
+#define I3C_MAX_ADDR			GENMASK(6, 0)
+
+struct i3c_master_controller;
+struct i3c_bus;
+
+/**
+ * struct i3c_i2c_dev - I3C/I2C common information
+ * @node: node element used to insert the device into the I2C or I3C device
+ *	  list
+ * @bus: I3C bus this device is connected to
+ * @master: I3C master that instantiated this device. Will be used to send
+ *	    I2C/I3C frames on the bus
+ * @master_priv: master private data assigned to the device. Can be used to
+ *		 add master specific information
+ *
+ * This structure is describing common I3C/I2C dev information.
+ */
+struct i3c_i2c_dev {
+	struct list_head node;
+	struct i3c_bus *bus;
+	struct i3c_master_controller *master;
+	void *master_priv;
+};
+
+#define I3C_LVR_I2C_INDEX_MASK		GENMASK(7, 5)
+#define I3C_LVR_I2C_INDEX(x)		((x) << 5)
+#define I3C_LVR_I2C_FM_MODE		BIT(4)
+
+#define I2C_MAX_ADDR			GENMASK(9, 0)
+
+/**
+ * struct i2c_device - I2C device object
+ * @common: inherit common I3C/I2C description
+ * @info: I2C board info used to instantiate the I2C device. If you are
+ *	  using DT to describe your hardware, this will be filled for you
+ * @client: I2C client object created by the I2C framework. This will only
+ *	    be valid after i3c_master_register() returns
+ * @lvr: Legacy Virtual Register value as described in the I3C specification
+ *
+ * I2C device object. Note that the real I2C device is represented by
+ * i2c_device->client, but we need extra information to handle the device when
+ * it's connected to an I3C bus, hence the &struct i2c_device wrapper.
+ *
+ * The I2C framework is not impacted by this new representation.
+ */
+struct i2c_device {
+	struct i3c_i2c_dev common;
+	struct i2c_board_info info;
+	struct i2c_client *client;
+	u8 lvr;
+};
+
+/**
+ * struct i3c_ibi_slot - I3C IBI (In-Band Interrupt) slot
+ * @work: work associated to this slot. The IBI handler will be called from
+ *	  there
+ * @dev: the I3C device that has generated this IBI
+ * @len: length of the payload associated to this IBI
+ * @data: payload buffer
+ *
+ * An IBI slot is an object pre-allocated by the controller and used when an
+ * IBI comes in.
+ * Every time an IBI comes in, the I3C master driver should find a free IBI
+ * slot in its IBI slot pool, retrieve the IBI payload and queue the IBI using
+ * i3c_master_queue_ibi().
+ *
+ * How IBI slots are allocated is left to the I3C master driver, though, for
+ * simple kmalloc-based allocation, the generic IBI slot pool can be used.
+ */
+struct i3c_ibi_slot {
+	struct work_struct work;
+	struct i3c_device *dev;
+	unsigned int len;
+	void *data;
+};
+
+/**
+ * struct i3c_device_ibi_info - IBI information attached to a specific device
+ * @all_ibis_handled: used to be informed when no more IBIs are waiting to be
+ *		      processed. Used by i3c_device_disable_ibi() to wait for
+ *		      all IBIs to be dequeued
+ * @pending_ibis: count the number of pending IBIs. Each pending IBI has its
+ *		  work element queued to the controller workqueue
+ * @max_payload_len: maximum payload length for an IBI coming from this device.
+ *		     this value is specified when calling
+ *		     i3c_device_request_ibi() and should not change at run
+ *		     time. All messages IBIs exceeding this limit should be
+ *		     rejected by the master
+ * @enabled: reflect the IBI status
+ * @handler: IBI handler specified at i3c_device_request_ibi() call time. This
+ *	     handler will be called from the controller workqueue, and as such
+ *	     is allowed to sleep (though it is recommended to process the IBI
+ *	     as fast as possible to not stall processing of other IBIs queued
+ *	     on the same workqueue).
+ *	     New I3C messages can be sent from the IBI handler
+ *
+ * The &struct_i3c_device_ibi_info object is allocated when
+ * i3c_device_request_ibi() is called and attached to a specific device. This
+ * object is here to manage IBIs coming from a specific I3C device.
+ *
+ * Note that this structure is the generic view of the IBI management
+ * infrastructure. I3C master drivers may have their own internal
+ * representation which they can associate to the device using
+ * controller-private data.
+ */
+struct i3c_device_ibi_info {
+	struct completion all_ibis_handled;
+	atomic_t pending_ibis;
+	unsigned int max_payload_len;
+	bool enabled;
+	void (*handler)(struct i3c_device *dev,
+			const struct i3c_ibi_payload *payload);
+};
+
+/**
+ * struct i3c_device - I3C device object
+ * @common: inherit common I3C/I2C description
+ * @dev: device object to register the I3C dev to the device model
+ * @regfailed: true if the device has already been registered to the device
+ *	       model and this operation failed. The goal it to not try
+ *	       register the device everytime a new device is discovered on
+ *	       the bus
+ * @info: I3C device information. Will be automatically filled when you create
+ *	  your device with i3c_master_add_i3c_dev_locked()
+ * @init_dyn_addr: initial dynamic address requested by the FW
+ * @ibi_lock: lock used to protect the &struct_i3c_device->ibi
+ * @ibi: IBI info attached to a device. Should be NULL until
+ *	 i3c_device_request_ibi() is called
+ *
+ * I3C device object. Every I3C devs on the I3C bus are represented, including
+ * I3C masters. For each of them, we have an instance of &struct i3c_device.
+ */
+struct i3c_device {
+	struct i3c_i2c_dev common;
+	struct device dev;
+	bool regfailed;
+	struct i3c_device_info info;
+	u8 init_dyn_addr;
+	struct mutex ibi_lock;
+	struct i3c_device_ibi_info *ibi;
+};
+
+/*
+ * The I3C specification says the maximum number of devices connected on the
+ * bus is 11, but this number depends on external parameters like trace length,
+ * capacitive load per Device, and the types of Devices present on the Bus.
+ * I3C master can also have limitations, so this number is just here as a
+ * reference and should be adjusted on a per-controller/per-board basis.
+ */
+#define I3C_BUS_MAX_DEVS		11
+
+#define I3C_BUS_MAX_I3C_SCL_RATE	12900000
+#define I3C_BUS_TYP_I3C_SCL_RATE	12500000
+#define I3C_BUS_I2C_FM_PLUS_SCL_RATE	1000000
+#define I3C_BUS_I2C_FM_SCL_RATE		400000
+#define I3C_BUS_TLOW_OD_MIN_NS		200
+
+/**
+ * enum i3c_bus_mode - I3C bus mode
+ * @I3C_BUS_MODE_PURE: only I3C devices are connected to the bus. No limitation
+ *		       expected
+ * @I3C_BUS_MODE_MIXED_FAST: I2C devices with 50ns spike filter are present on
+ *			     the bus. The only impact in this mode is that the
+ *			     high SCL pulse has to stay below 50ns to trick I2C
+ *			     devices when transmitting I3C frames
+ * @I3C_BUS_MODE_MIXED_SLOW: I2C devices without 50ns spike filter are present
+ *			     on the bus
+ */
+enum i3c_bus_mode {
+	I3C_BUS_MODE_PURE,
+	I3C_BUS_MODE_MIXED_FAST,
+	I3C_BUS_MODE_MIXED_SLOW,
+};
+
+/**
+ * enum i3c_addr_slot_status - I3C address slot status
+ * @I3C_ADDR_SLOT_FREE: address is free
+ * @I3C_ADDR_SLOT_RSVD: address is reserved
+ * @I3C_ADDR_SLOT_I2C_DEV: address is assigned to an I2C device
+ * @I3C_ADDR_SLOT_I3C_DEV: address is assigned to an I3C device
+ * @I3C_ADDR_SLOT_STATUS_MASK: address slot mask
+ *
+ * On an I3C bus, addresses are assigned dynamically, and we need to know which
+ * addresses are free to use and which ones are already assigned.
+ *
+ * Addresses marked as reserved are those reserved by the I3C protocol
+ * (broadcast address, ...).
+ */
+enum i3c_addr_slot_status {
+	I3C_ADDR_SLOT_FREE,
+	I3C_ADDR_SLOT_RSVD,
+	I3C_ADDR_SLOT_I2C_DEV,
+	I3C_ADDR_SLOT_I3C_DEV,
+	I3C_ADDR_SLOT_STATUS_MASK = 3,
+};
+
+/**
+ * struct i3c_bus - I3C bus object
+ * @dev: device to be registered to the device-model
+ * @cur_master: I3C master currently driving the bus. Since I3C is multi-master
+ *		this can change over the time. Will be used to let a master
+ *		know whether it needs to request bus ownership before sending
+ *		a frame or not
+ * @id: bus ID. Assigned by the framework when register the bus
+ * @addrslots: a bitmap with 2-bits per-slot to encode the address status and
+ *	       ease the DAA (Dynamic Address Assignment) procedure (see
+ *	       &enum i3c_addr_slot_status)
+ * @mode: bus mode (see &enum i3c_bus_mode)
+ * @scl_rate: SCL signal rate for I3C and I2C mode
+ * @devs: 2 lists containing all I3C/I2C devices connected to the bus
+ * @lock: read/write lock on the bus. This is needed to protect against
+ *	  operations that have an impact on the whole bus and the devices
+ *	  connected to it. For example, when asking slaves to drop their
+ *	  dynamic address (RSTDAA CCC), we need to make sure no one is trying
+ *	  to send I3C frames to these devices.
+ *	  Note that this lock does not protect against concurrency between
+ *	  devices: several drivers can send different I3C/I2C frames through
+ *	  the same master in parallel. This is the responsibility of the
+ *	  master to guarantee that frames are actually sent sequentially and
+ *	  not interlaced
+ *
+ * The I3C bus is represented with its own object and not implicitly described
+ * by the I3C master to cope with the multi-master functionality, where one bus
+ * can be shared amongst several masters, each of them requesting bus ownership
+ * when they need to.
+ */
+struct i3c_bus {
+	struct device dev;
+	struct i3c_device *cur_master;
+	int id;
+	unsigned long addrslots[((I2C_MAX_ADDR + 1) * 2) / BITS_PER_LONG];
+	enum i3c_bus_mode mode;
+	struct {
+		unsigned long i3c;
+		unsigned long i2c;
+	} scl_rate;
+	struct {
+		struct list_head i3c;
+		struct list_head i2c;
+	} devs;
+	struct rw_semaphore lock;
+};
+
+struct i3c_master_controller;
+
+/**
+ * struct i3c_master_controller_ops - I3C master methods
+ * @bus_init: hook responsible for the I3C bus initialization. You should at
+ *	      least call master_set_info() from there and set the bus mode.
+ *	      You can also put controller specific initialization in there.
+ *	      This method is mandatory.
+ * @bus_cleanup: cleanup everything done in
+ *		 &i3c_master_controller_ops->bus_init().
+ *		 This method is optional.
+ * @attach_i3c_dev: called every time an I3C device is attached to the bus. It
+ *		    can be after a DAA or when a device is statically declared
+ *		    by the FW, in which case it will only have a static address
+ *		    and the dynamic address will be 0.
+ *		    This is a good place to attach master controller specific
+ *		    data to I3C devices.
+ *		    This method is optional.
+ * @reattach_i3c_dev: called every time an I3C device has its addressed
+ *		      changed. It can be because the device has been powered
+ *		      down and has lost its address, or it can happen when a
+ *		      device had a static address and has been assigned a
+ *		      dynamic address with SETDASA.
+ *		      This method is optional.
+ * @detach_i3c_dev: called when an I3C device is detached from the bus. Usually
+ *		    happens when the master device is unregistered.
+ *		    This method is optional.
+ * @do_daa: do a DAA (Dynamic Address Assignment) procedure. This is procedure
+ *	    should send an ENTDAA CCC command and then add all devices
+ *	    discovered sure the DAA using i3c_master_add_i3c_dev_locked().
+ *	    Add devices added with i3c_master_add_i3c_dev_locked() will then be
+ *	    attached or re-attached to the controller.
+ *	    This method is mandatory.
+ * @supports_ccc_cmd: should return true if the CCC command is supported, false
+ *		      otherwise.
+ *		      This method is optional, if not provided the core assumes
+ *		      all CCC commands are supported.
+ * @send_ccc_cmd: send a CCC command
+ *		  This method is mandatory.
+ * @priv_xfers: do one or several private I3C SDR transfers
+ *		This method is mandatory.
+ * @attach_i2c_dev: called every time an I2C device is attached to the bus.
+ *		    This is a good place to attach master controller specific
+ *		    data to I2C devices.
+ *		    This method is optional.
+ * @detach_i2c_dev: called when an I2C device is detached from the bus. Usually
+ *		    happens when the master device is unregistered.
+ *		    This method is optional.
+ * @i2c_xfers: do one or several I2C transfers.
+ *	       This method is mandatory.
+ * @i2c_funcs: expose the supported I2C functionalities.
+ *	       This method is mandatory.
+ * @request_ibi: attach an IBI handler to an I3C device. This implies defining
+ *		 an IBI handler and the constraints of the IBI (maximum payload
+ *		 length and number of pre-allocated slots).
+ *		 Some controllers support less IBI-capable devices than regular
+ *		 devices, so this method might return -%EBUSY if there's no
+ *		 more space for an extra IBI registration
+ *		 This method is optional.
+ * @free_ibi: free an IBI previously requested with ->request_ibi(). The IBI
+ *	      should have been disabled with ->disable_irq() prior to that
+ *	      This method is mandatory only if ->request_ibi is not NULL.
+ * @enable_ibi: enable the IBI. Only valid if ->request_ibi() has been called
+ *		prior to ->enable_ibi(). The controller should first enable
+ *		the IBI on the controller end (for example, unmask the hardware
+ *		IRQ) and then send the ENEC CCC command (with the IBI flag set)
+ *		to the I3C device.
+ *		This method is mandatory only if ->request_ibi is not NULL.
+ * @disable_ibi: disable an IBI. First send the DISEC CCC command with the IBI
+ *		 flag set and then deactivate the hardware IRQ on the
+ *		 controller end.
+ *		 This method is mandatory only if ->request_ibi is not NULL.
+ * @recycle_ibi_slot: recycle an IBI slot. Called every time an IBI has been
+ *		      processed by its handler. The IBI slot should be put back
+ *		      in the IBI slot pool so that the controller can re-use it
+ *		      for a future IBI
+ *		      This method is mandatory only if ->request_ibi is not
+ *		      NULL.
+ */
+struct i3c_master_controller_ops {
+	int (*bus_init)(struct i3c_master_controller *master);
+	void (*bus_cleanup)(struct i3c_master_controller *master);
+	int (*attach_i3c_dev)(struct i3c_device *dev);
+	void (*reattach_i3c_dev)(struct i3c_device *dev, u8 old_dyn_addr);
+	void (*detach_i3c_dev)(struct i3c_device *dev);
+	int (*do_daa)(struct i3c_master_controller *master);
+	bool (*supports_ccc_cmd)(struct i3c_master_controller *master,
+				 const struct i3c_ccc_cmd *cmd);
+	int (*send_ccc_cmd)(struct i3c_master_controller *master,
+			    struct i3c_ccc_cmd *cmd);
+	int (*priv_xfers)(struct i3c_device *dev,
+			  const struct i3c_priv_xfer *xfers,
+			  int nxfers);
+	int (*attach_i2c_dev)(struct i2c_device *dev);
+	void (*detach_i2c_dev)(struct i2c_device *dev);
+	int (*i2c_xfers)(struct i2c_device *dev,
+			 const struct i2c_msg *xfers, int nxfers);
+	u32 (*i2c_funcs)(struct i3c_master_controller *master);
+	int (*request_ibi)(struct i3c_device *dev,
+			   const struct i3c_ibi_setup *req);
+	void (*free_ibi)(struct i3c_device *dev);
+	int (*enable_ibi)(struct i3c_device *dev);
+	int (*disable_ibi)(struct i3c_device *dev);
+	void (*recycle_ibi_slot)(struct i3c_device *dev,
+				 struct i3c_ibi_slot *slot);
+};
+
+/**
+ * struct i3c_master_controller - I3C master controller object
+ * @parent: parent device that instantiated this master
+ * @this: an I3C device object representing this master. This device will be
+ *	  added to the list of I3C devs available on the bus
+ * @i2c: I2C adapter used for backward compatibility. This adapter is
+ *	 registered to the I2C subsystem to be as transparent as possible to
+ *	 existing I2C drivers
+ * @ops: master operations. See &struct i3c_master_controller_ops
+ * @secondary: true if the master is a secondary master
+ * @init_done: true when the bus initialization is done
+ * @bus: I3C bus object created by this master
+ * @wq: workqueue used to execute IBI handlers. Can also be used by master
+ *	drivers if they need to postpone operations that need to take place
+ *	in a thread context. Typical examples are Hot Join processing which
+ *	requires taking the bus lock in maintenance, which in turn, can only
+ *	be done from a sleep-able context
+ *
+ * A &struct i3c_master_controller has to be registered to the I3C subsystem
+ * through i3c_master_register(). None of &struct i3c_master_controller fields
+ * should be set manually, just pass appropriate values to
+ * i3c_master_register().
+ */
+struct i3c_master_controller {
+	struct device *parent;
+	struct i3c_device *this;
+	struct i2c_adapter i2c;
+	const struct i3c_master_controller_ops *ops;
+	bool secondary;
+	bool init_done;
+	struct i3c_bus *bus;
+	struct workqueue_struct *wq;
+};
+
+/**
+ * i3c_bus_for_each_i2cdev() - iterate over all I2C devices present on the bus
+ * @bus: the I3C bus
+ * @i2cdev: an I2C device updated to point to the current device at each loop
+ *	    iteration
+ *
+ * Iterate over all I2C devs present on the bus.
+ */
+#define i3c_bus_for_each_i2cdev(bus, i2cdev)				\
+	list_for_each_entry(i2cdev, &(bus)->devs.i2c, common.node)
+
+/**
+ * i3c_bus_for_each_i3cdev() - iterate over all I3C devices present on the bus
+ * @bus: the I3C bus
+ * @i3cdev: an I3C device updated to point to the current device at each loop
+ *	    iteration
+ *
+ * Iterate over all I3C devs present on the bus.
+ */
+#define i3c_bus_for_each_i3cdev(bus, i3cdev)				\
+	list_for_each_entry(i3cdev, &(bus)->devs.i3c, common.node)
+
+void i3c_bus_maintenance_lock(struct i3c_bus *bus);
+void i3c_bus_maintenance_unlock(struct i3c_bus *bus);
+void i3c_bus_normaluse_lock(struct i3c_bus *bus);
+void i3c_bus_normaluse_unlock(struct i3c_bus *bus);
+
+int i3c_master_do_i2c_xfers(struct i3c_master_controller *master,
+			    const struct i2c_msg *xfers,
+			    int nxfers);
+
+int i3c_master_disec_locked(struct i3c_master_controller *master, u8 addr,
+			    u8 evts);
+int i3c_master_enec_locked(struct i3c_master_controller *master, u8 addr,
+			   u8 evts);
+int i3c_master_entdaa_locked(struct i3c_master_controller *master);
+int i3c_master_defslvs_locked(struct i3c_master_controller *master);
+
+int i3c_master_get_free_addr(struct i3c_master_controller *master,
+			     u8 start_addr);
+
+int i3c_master_add_i3c_dev_locked(struct i3c_master_controller *master,
+				  u8 addr);
+int i3c_master_do_daa(struct i3c_master_controller *master);
+
+int i3c_master_set_info(struct i3c_master_controller *master,
+			const struct i3c_device_info *info);
+
+int i3c_master_register(struct i3c_master_controller *master,
+			struct device *parent,
+			const struct i3c_master_controller_ops *ops,
+			bool secondary);
+int i3c_master_unregister(struct i3c_master_controller *master);
+
+/**
+ * i3c_device_get_master_data() - get master private data attached to an I3C
+ *				  device
+ * @dev: the I3C dev to attach private data to
+ *
+ * Return: the private data previously attached with
+ *	   i3c_device_set_master_data() or NULL if no data has been attached
+ *	   to the device.
+ */
+static inline void *i3c_device_get_master_data(const struct i3c_device *dev)
+{
+	return dev->common.master_priv;
+}
+
+/**
+ * i3c_device_set_master_data() - attach master private data to an I3C device
+ * @dev: the I3C dev to attach private data to
+ * @data: private data
+ *
+ * This functions allows a master controller to attach per-device private data
+ * which can then be retrieved with i3c_device_get_master_data().
+ *
+ * Attaching private data to a device is usually done just after calling
+ * i3c_master_add_i3c_dev_locked().
+ */
+static inline void i3c_device_set_master_data(struct i3c_device *dev,
+					      void *data)
+{
+	dev->common.master_priv = data;
+}
+
+/**
+ * i2c_device_get_master_data() - get master private data attached to an I2C
+ *				  device
+ * @dev: the I2C dev to attach private data to
+ *
+ * Return: the private data previously attached with
+ *	   i2c_device_set_master_data() or NULL if no data has been attached
+ *	   to the device.
+ */
+static inline void *i2c_device_get_master_data(const struct i2c_device *dev)
+{
+	return dev->common.master_priv;
+}
+
+/**
+ * i2c_device_set_master_data() - attach master private data to an I2C device
+ * @dev: the I2C dev to attach private data to
+ * @data: private data
+ *
+ * This functions allows a master controller to attach per-device private data
+ * which can then be retrieved with i2c_device_get_master_data().
+ *
+ * Attaching private data to a device is usually done during
+ * &master_controller_ops->bus_init(), by iterating over all I2C devices
+ * instantiated by the core (using i3c_bus_for_each_i2cdev()).
+ */
+static inline void i2c_device_set_master_data(struct i2c_device *dev,
+					      void *data)
+{
+	dev->common.master_priv = data;
+}
+
+/**
+ * i3c_device_get_master() - get master used to communicate with a device
+ * @dev: I3C dev
+ *
+ * Return: the master controller driving @dev
+ */
+static inline struct i3c_master_controller *
+i3c_device_get_master(struct i3c_device *dev)
+{
+	return dev->common.master;
+}
+
+/**
+ * i2c_device_get_master() - get master used to communicate with a device
+ * @dev: I2C dev
+ *
+ * Return: the master controller driving @dev
+ */
+static inline struct i3c_master_controller *
+i2c_device_get_master(struct i2c_device *dev)
+{
+	return dev->common.master;
+}
+
+/**
+ * i3c_master_get_bus() - get the bus attached to a master
+ * @master: master object
+ *
+ * Return: the I3C bus @master is connected to
+ */
+static inline struct i3c_bus *
+i3c_master_get_bus(struct i3c_master_controller *master)
+{
+	return master->bus;
+}
+
+/**
+ * i3c_device_get_bus() - get the bus attached to a device
+ * @dev: an I3C device
+ *
+ * Return: the I3C bus @dev is connected to
+ */
+static inline struct i3c_bus *i3c_device_get_bus(struct i3c_device *dev)
+{
+	return dev->common.bus;
+}
+
+struct i3c_generic_ibi_pool;
+
+struct i3c_generic_ibi_pool *
+i3c_generic_ibi_alloc_pool(struct i3c_device *dev,
+			   const struct i3c_ibi_setup *req);
+void i3c_generic_ibi_free_pool(struct i3c_generic_ibi_pool *pool);
+
+struct i3c_ibi_slot *
+i3c_generic_ibi_get_free_slot(struct i3c_generic_ibi_pool *pool);
+void i3c_generic_ibi_recycle_slot(struct i3c_generic_ibi_pool *pool,
+				  struct i3c_ibi_slot *slot);
+
+void i3c_master_queue_ibi(struct i3c_device *dev, struct i3c_ibi_slot *slot);
+
+struct i3c_ibi_slot *i3c_master_get_free_ibi_slot(struct i3c_device *dev);
+
+#endif /* I3C_MASTER_H */
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 48fb2b43c35a..ba4a7a263bf5 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -448,6 +448,23 @@ struct pci_epf_device_id {
 	kernel_ulong_t driver_data;
 };
 
+/* i3c */
+
+#define I3C_MATCH_DCR			0x1
+#define I3C_MATCH_MANUF			0x2
+#define I3C_MATCH_PART			0x4
+#define I3C_MATCH_EXTRA_INFO		0x8
+
+struct i3c_device_id {
+	__u8 match_flags;
+	__u8 dcr;
+	__u16 manuf_id;
+	__u16 part_id;
+	__u16 extra_info;
+
+	const void *data;
+};
+
 /* spi */
 
 #define SPI_NAME_SIZE	32
-- 
2.14.1

^ permalink raw reply related	[flat|nested] 51+ messages in thread

* [PATCH v4 02/10] docs: driver-api: Add I3C documentation
  2018-03-30  7:47 [PATCH v4 00/10] Add the I3C subsystem Boris Brezillon
  2018-03-30  7:47 ` [PATCH v4 01/10] i3c: Add core I3C infrastructure Boris Brezillon
@ 2018-03-30  7:47 ` Boris Brezillon
  2018-03-30  7:47 ` [PATCH v4 03/10] i3c: Add sysfs ABI spec Boris Brezillon
                   ` (8 subsequent siblings)
  10 siblings, 0 replies; 51+ messages in thread
From: Boris Brezillon @ 2018-03-30  7:47 UTC (permalink / raw)
  To: Wolfram Sang, linux-i2c, Jonathan Corbet, linux-doc,
	Greg Kroah-Hartman, Arnd Bergmann
  Cc: Przemyslaw Sroka, Arkadiusz Golec, Alan Douglas, Bartosz Folta,
	Damian Kos, Alicja Jurasik-Urbaniak, Cyprian Wronka,
	Suresh Punnoose, Rafal Ciepiela, Thomas Petazzoni,
	Nishanth Menon, Rob Herring, Pawel Moll, Mark Rutland,
	Ian Campbell, Kumar Gala, devicetree, linux-kernel, Vitor Soares,
	Geert Uytterhoeven, Linus Walleij, Xiang Lin, linux-gpio,
	Boris Brezillon

Add the I3C documentation describing the protocol, the master driver API
and the device driver API.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
---
Changes in v2:
- Moved out of patch "i3c: Add core I3C infrastructure"
- Add link to the I3C spec
- Move rst files in Documentation/driver-api/i3c/
---
 Documentation/driver-api/i3c/conf.py               |  10 +
 Documentation/driver-api/i3c/device-driver-api.rst |   7 +
 Documentation/driver-api/i3c/index.rst             |   9 +
 Documentation/driver-api/i3c/master-driver-api.rst |   8 +
 Documentation/driver-api/i3c/protocol.rst          | 201 +++++++++++++++++++++
 Documentation/driver-api/index.rst                 |   1 +
 6 files changed, 236 insertions(+)
 create mode 100644 Documentation/driver-api/i3c/conf.py
 create mode 100644 Documentation/driver-api/i3c/device-driver-api.rst
 create mode 100644 Documentation/driver-api/i3c/index.rst
 create mode 100644 Documentation/driver-api/i3c/master-driver-api.rst
 create mode 100644 Documentation/driver-api/i3c/protocol.rst

diff --git a/Documentation/driver-api/i3c/conf.py b/Documentation/driver-api/i3c/conf.py
new file mode 100644
index 000000000000..5a20832d59a7
--- /dev/null
+++ b/Documentation/driver-api/i3c/conf.py
@@ -0,0 +1,10 @@
+# -*- coding: utf-8; mode: python -*-
+
+project = "Linux I3C Subsystem"
+
+tags.add("subproject")
+
+latex_documents = [
+    ('index', 'i3c.tex', project,
+     'The kernel development community', 'manual'),
+]
diff --git a/Documentation/driver-api/i3c/device-driver-api.rst b/Documentation/driver-api/i3c/device-driver-api.rst
new file mode 100644
index 000000000000..63c843f148a6
--- /dev/null
+++ b/Documentation/driver-api/i3c/device-driver-api.rst
@@ -0,0 +1,7 @@
+=====================
+I3C device driver API
+=====================
+
+.. kernel-doc:: include/linux/i3c/device.h
+
+.. kernel-doc:: drivers/i3c/device.c
diff --git a/Documentation/driver-api/i3c/index.rst b/Documentation/driver-api/i3c/index.rst
new file mode 100644
index 000000000000..9c439220439d
--- /dev/null
+++ b/Documentation/driver-api/i3c/index.rst
@@ -0,0 +1,9 @@
+=============
+I3C subsystem
+=============
+
+.. toctree::
+
+   protocol
+   device-driver-api
+   master-driver-api
diff --git a/Documentation/driver-api/i3c/master-driver-api.rst b/Documentation/driver-api/i3c/master-driver-api.rst
new file mode 100644
index 000000000000..017e7711cdf7
--- /dev/null
+++ b/Documentation/driver-api/i3c/master-driver-api.rst
@@ -0,0 +1,8 @@
+================================
+I3C master controller driver API
+================================
+
+.. kernel-doc:: drivers/i3c/master.c
+
+.. kernel-doc:: include/linux/i3c/master.h
+
diff --git a/Documentation/driver-api/i3c/protocol.rst b/Documentation/driver-api/i3c/protocol.rst
new file mode 100644
index 000000000000..9c704d596ae3
--- /dev/null
+++ b/Documentation/driver-api/i3c/protocol.rst
@@ -0,0 +1,201 @@
+============
+I3C protocol
+============
+
+Disclaimer
+==========
+
+This chapter will focus on aspects that matter to software developers. For
+everything hardware related (like how things are transmitted on the bus, how
+collisions are prevented, ...) please have a look at the I3C specification.
+
+This document is just a brief introduction to the I3C protocol and the concepts
+it brings on the table. If you need more information, please refer to the MIPI
+I3C specification (can be downloaded here
+http://resources.mipi.org/mipi-i3c-v1-download).
+
+Introduction
+============
+
+The I3C (pronounced 'eye-three-see') is a MIPI standardized protocol designed
+to overcome I2C limitations (limited speed, external signals needed for
+interrupts, no automatic detection of the devices connected to the bus, ...)
+while remaining power-efficient.
+
+I3C Bus
+=======
+
+An I3C bus is made of several I3C devices and possibly some I2C devices as
+well, but let's focus on I3C devices for now.
+
+An I3C device on the I3C bus can have one of the following roles:
+
+* Master: the device is driving the bus. It's the one in charge of initiating
+  transactions or deciding who is allowed to talk on the bus (slave generated
+  events are possible in I3C, see below).
+* Slave: the device acts as a slave, and is not able to send frames to another
+  slave on the bus. The device can still send events to the master on
+  its own initiative if the master allowed it.
+
+I3C is a multi-master protocol, so there might be several masters on a bus,
+though only one device can act as a master at a given time. In order to gain
+bus ownership, a master has to follow a specific procedure.
+
+Each device on the I3C bus has to be assigned a dynamic address to be able to
+communicate. Until this is done, the device should only respond to a limited
+set of commands. If it has a static address (also called legacy I2C address),
+the device can reply to I2C transfers.
+
+In addition to these per-device addresses, the protocol defines a broadcast
+address in order to address all devices on the bus.
+
+Once a dynamic address has been assigned to a device, this address will be used
+for any direct communication with the device. Note that even after being
+assigned a dynamic address, the device should still process broadcast messages.
+
+I3C Device discovery
+====================
+
+The I3C protocol defines a mechanism to automatically discover devices present
+on the bus, their capabilities and the functionalities they provide. In this
+regard I3C is closer to a discoverable bus like USB than it is to I2C or SPI.
+
+The discovery mechanism is called DAA (Dynamic Address Assignment), because it
+not only discovers devices but also assigns them a dynamic address.
+
+During DAA, each I3C device reports 3 important things:
+
+* BCR: Bus Characteristic Register. This 8-bit register describes the device bus
+  related capabilities
+* DCR: Device Characteristic Register. This 8-bit register describes the
+  functionalities provided by the device
+* Provisional ID: A 48-bit unique identifier. On a given bus there should be no
+  Provisional ID collision, otherwise the discovery mechanism may fail.
+
+I3C slave events
+================
+
+The I3C protocol allows slaves to generate events on their own, and thus allows
+them to take temporary control of the bus.
+
+This mechanism is called IBI for In Band Interrupts, and as stated in the name,
+it allows devices to generate interrupts without requiring an external signal.
+
+During DAA, each device on the bus has been assigned an address, and this
+address will serve as a priority identifier to determine who wins if 2 different
+devices are generating an interrupt at the same moment on the bus (the lower the
+dynamic address the higher the priority).
+
+Masters are allowed to inhibit interrupts if they want to. This inhibition
+request can be broadcasted (applies to all devices) or sent to a specific
+device.
+
+I3C Hot-Join
+============
+
+The Hot-Join mechanism is similart to USB hotplug. This mechanism allows
+slaves to join the bus after it has been initialized by the master.
+
+This covers the following use cases:
+
+* the device is not powered when the bus is probed
+* the device is hotplugged on the bus through an extension board
+
+This mechanism is relying on slave events to inform the master that a new
+device joined the bus and is waiting for a dynamic address.
+
+The master is then free to address the request as it wishes: ignore it or
+assign a dynamic address to the slave.
+
+I3C transfer types
+==================
+
+If you omit SMBus (which is just a standardization on how to access registers
+exposed by I2C devices), I2C has only one transfer type.
+
+I3C defines 3 different classes of transfer in addition to I2C transfers which
+are here for backward compatibility with I2C devices.
+
+I3C CCC commands
+----------------
+
+CCC (Common Command Code) commands are meant to be used for anything that is
+related to bus management and all features that are common to a set of devices.
+
+CCC commands contain an 8-bit CCC id describing the command that is executed.
+The MSB of this id specifies whether this is a broadcast command (bit7 = 0) or a
+unicast one (bit7 = 1).
+
+The command ID can be followed by a payload. Depending on the command, this
+payload is either sent by the master sending the command (write CCC command),
+or sent by the slave receiving the command (read CCC command). Of course, read
+accesses only apply to unicast commands.
+Note that, when sending a CCC command to a specific device, the device address
+is passed in the first byte of the payload.
+
+The payload length is not explicitly passed on the bus, and should be extracted
+from the CCC id.
+
+Note that vendors can use a dedicated range of CCC ids for their own commands
+(0x61-0x7f and 0xe0-0xef).
+
+I3C Private SDR transfers
+-------------------------
+
+Private SDR (Single Data Rate) transfers should be used for anything that is
+device specific and does not require high transfer speed.
+
+It is the equivalent of I2C transfers but in the I3C world. Each transfer is
+passed the device address (dynamic address assigned during DAA), a payload
+and a direction.
+
+The only difference with I2C is that the transfer is much faster (typical SCL
+frequency is 12.5MHz).
+
+I3C HDR commands
+----------------
+
+HDR commands should be used for anything that is device specific and requires
+high transfer speed.
+
+The first thing attached to an HDR command is the HDR mode. There are currently
+3 different modes defined by the I3C specification (refer to the specification
+for more details):
+
+* HDR-DDR: Double Data Rate mode
+* HDR-TSP: Ternary Symbol Pure. Only usable on busses with no I2C devices
+* HDR-TSL: Ternary Symbol Legacy. Usable on busses with I2C devices
+
+When sending an HDR command, the whole bus has to enter HDR mode, which is done
+using a broadcast CCC command.
+Once the bus has entered a specific HDR mode, the master sends the HDR command.
+An HDR command is made of:
+
+* one 16-bits command word
+* N 16-bits data words
+
+Those words may be wrapped with specific preambles/post-ambles which depend on
+the chosen HDR mode and are detailed here (see the specification for more
+details).
+
+The 16-bits command word is made of:
+
+* bit[15]: direction bit, read is 1 write is 0
+* bit[14:8]: command code. Identifies the command being executed, the amount of
+  data words and their meaning
+* bit[7:1]: I3C address of the device this command is addressed to
+* bit[0]: reserved/parity-bit
+
+Backward compatibility with I2C devices
+=======================================
+
+The I3C protocol has been designed to be backward compatible with I2C devices.
+This backward compatibility allows one to connect a mix of I2C and I3C devices
+on the same bus, though, in order to be really efficient, I2C devices should
+be equipped with 50 ns spike filters.
+
+I2C devices can't be discovered like I3C ones and have to be statically
+declared. In order to let the master know what these devices are capable of
+(both in terms of bus related limitations and functionalities), the software
+has to provide some information, which is done through the LVR (Legacy I2C
+Virtual Register).
diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst
index e9b41b1634f3..2563a4e19e08 100644
--- a/Documentation/driver-api/index.rst
+++ b/Documentation/driver-api/index.rst
@@ -30,6 +30,7 @@ available subsections can be seen below.
    pci
    spi
    i2c
+   i3c/index
    hsi
    edac
    scsi
-- 
2.14.1

^ permalink raw reply related	[flat|nested] 51+ messages in thread

* [PATCH v4 03/10] i3c: Add sysfs ABI spec
  2018-03-30  7:47 [PATCH v4 00/10] Add the I3C subsystem Boris Brezillon
  2018-03-30  7:47 ` [PATCH v4 01/10] i3c: Add core I3C infrastructure Boris Brezillon
  2018-03-30  7:47 ` [PATCH v4 02/10] docs: driver-api: Add I3C documentation Boris Brezillon
@ 2018-03-30  7:47 ` Boris Brezillon
  2018-04-29 13:37   ` Greg Kroah-Hartman
  2018-03-30  7:47 ` [PATCH v4 04/10] dt-bindings: i3c: Document core bindings Boris Brezillon
                   ` (7 subsequent siblings)
  10 siblings, 1 reply; 51+ messages in thread
From: Boris Brezillon @ 2018-03-30  7:47 UTC (permalink / raw)
  To: Wolfram Sang, linux-i2c, Jonathan Corbet, linux-doc,
	Greg Kroah-Hartman, Arnd Bergmann
  Cc: Przemyslaw Sroka, Arkadiusz Golec, Alan Douglas, Bartosz Folta,
	Damian Kos, Alicja Jurasik-Urbaniak, Cyprian Wronka,
	Suresh Punnoose, Rafal Ciepiela, Thomas Petazzoni,
	Nishanth Menon, Rob Herring, Pawel Moll, Mark Rutland,
	Ian Campbell, Kumar Gala, devicetree, linux-kernel, Vitor Soares,
	Geert Uytterhoeven, Linus Walleij, Xiang Lin, linux-gpio,
	Boris Brezillon

Document sysfs files/directories/symlinks exposed by the I3C subsystem.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
---
Changes in v2:
- new patch
---
 Documentation/ABI/testing/sysfs-bus-i3c | 95 +++++++++++++++++++++++++++++++++
 1 file changed, 95 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-i3c

diff --git a/Documentation/ABI/testing/sysfs-bus-i3c b/Documentation/ABI/testing/sysfs-bus-i3c
new file mode 100644
index 000000000000..5e88cc093e0e
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-i3c
@@ -0,0 +1,95 @@
+What:		/sys/bus/i3c/devices/i3c-<bus-id>
+KernelVersion:  4.16
+Contact:	linux-i3c@vger.kernel.org
+Description:
+		An I3C bus. This directory will contain one sub-directory per
+		I3C device present on the bus.
+
+What:		/sys/bus/i3c/devices/i3c-<bus-id>/current_master
+KernelVersion:  4.16
+Contact:	linux-i3c@vger.kernel.org
+Description:
+		Expose the master that owns the bus (<bus-id>-<master-pid>) at
+		the time this file is read. Note that bus ownership can change
+		overtime, so there's no guarantee that when the read() call
+		returns, the value returned is still valid.
+
+What:		/sys/bus/i3c/devices/i3c-<bus-id>/mode
+KernelVersion:  4.16
+Contact:	linux-i3c@vger.kernel.org
+Description:
+		I3C bus mode. Can be "pure", "mixed-fast" or "mixed-slow". See
+		the I3C specification for a detailed description of what each
+		of these modes implies.
+
+What:		/sys/bus/i3c/devices/i3c-<bus-id>/i3c_scl_frequency
+KernelVersion:  4.16
+Contact:	linux-i3c@vger.kernel.org
+Description:
+		The frequency (expressed in Hz) of the SCL signal when
+		operating in I3C SDR mode.
+
+What:		/sys/bus/i3c/devices/i3c-<bus-id>/i2c_scl_frequency
+KernelVersion:  4.16
+Contact:	linux-i3c@vger.kernel.org
+Description:
+		The frequency (expressed in Hz) of the SCL signal when
+		operating in I2C mode.
+
+What:		/sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>
+KernelVersion:  4.16
+Contact:	linux-i3c@vger.kernel.org
+Description:
+		An I3C device present on I3C bus identified by <bus-id>. Note
+		that all devices are represented including the master driving
+		the bus.
+
+What:		/sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>/address
+KernelVersion:  4.16
+Contact:	linux-i3c@vger.kernel.org
+Description:
+		Dynamic address assigned to device <bus-id>-<device-pid>. This
+		address may change if the bus is re-initialized.
+
+What:		/sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>/bcr
+KernelVersion:  4.16
+Contact:	linux-i3c@vger.kernel.org
+Description:
+		BCR stands for Bus Characteristics Register and express the
+		device capabilities in term of speed, maximum read/write
+		length, etc. See the I3C specification for more details.
+
+What:		/sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>/dcr
+KernelVersion:  4.16
+Contact:	linux-i3c@vger.kernel.org
+Description:
+		DCR stands for Device Characteristics Register and express the
+		device capabilities in term of exposed features. See the I3C
+		specification for more details.
+
+What:		/sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>/pid
+KernelVersion:  4.16
+Contact:	linux-i3c@vger.kernel.org
+Description:
+		PID stands for Provisional ID and is used to uniquely identify
+		a device on a bus. This PID contains information about the
+		vendor, the part and an instance ID so that several devices of
+		the same type can be connected on the same bus.
+		See the I3C specification for more details.
+
+What:		/sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>/hdrcap
+KernelVersion:  4.16
+Contact:	linux-i3c@vger.kernel.org
+Description:
+		Expose the HDR (High Data Rate) capabilities of a device.
+		Returns a list of supported HDR mode, each element is separated
+		by space. Modes can be "hdr-ddr", "hdr-tsp" and "hdr-tsl".
+		See the I3C specification for more details about these HDR
+		modes.
+
+What:		/sys/bus/i3c/devices/<bus-id>-<device-pid>
+KernelVersion:  4.16
+Contact:	linux-i3c@vger.kernel.org
+Description:
+		These directories are just symbolic links to
+		/sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>.
-- 
2.14.1

^ permalink raw reply related	[flat|nested] 51+ messages in thread

* [PATCH v4 04/10] dt-bindings: i3c: Document core bindings
  2018-03-30  7:47 [PATCH v4 00/10] Add the I3C subsystem Boris Brezillon
                   ` (2 preceding siblings ...)
  2018-03-30  7:47 ` [PATCH v4 03/10] i3c: Add sysfs ABI spec Boris Brezillon
@ 2018-03-30  7:47 ` Boris Brezillon
  2018-03-30  7:55   ` Geert Uytterhoeven
  2018-04-09 20:24   ` Rob Herring
  2018-03-30  7:47 ` [PATCH v4 05/10] dt-bindings: i3c: Add macros to help fill I3C/I2C device's reg property Boris Brezillon
                   ` (6 subsequent siblings)
  10 siblings, 2 replies; 51+ messages in thread
From: Boris Brezillon @ 2018-03-30  7:47 UTC (permalink / raw)
  To: Wolfram Sang, linux-i2c, Jonathan Corbet, linux-doc,
	Greg Kroah-Hartman, Arnd Bergmann
  Cc: Przemyslaw Sroka, Arkadiusz Golec, Alan Douglas, Bartosz Folta,
	Damian Kos, Alicja Jurasik-Urbaniak, Cyprian Wronka,
	Suresh Punnoose, Rafal Ciepiela, Thomas Petazzoni,
	Nishanth Menon, Rob Herring, Pawel Moll, Mark Rutland,
	Ian Campbell, Kumar Gala, devicetree, linux-kernel, Vitor Soares,
	Geert Uytterhoeven, Linus Walleij, Xiang Lin, linux-gpio,
	Boris Brezillon

A new I3C subsystem has been added and a generic description has been
created to represent the I3C bus and the devices connected on it.

Document this generic representation.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
---
Changes in v4:
- Clarify the fact that static address == I3C address and dynamic
  address == I3C address
- Use i2c-scl-hz in the example

Changes in v3:
- Rename {i2c,i3c}-scl-frequency DT prop into {i2c,i3c}-scl-hz
- Rework the way we expose the provisional ID and LVR information
- Rename dynamic-address into assigned-address
- Enforce the I3C master node name

Changes in v2:
- Define how to describe I3C devices in the DT and when it should be
  used. Note that the parsing of I3C devices is not yet implemented in
  the framework. Will be added when someone really needs it.
---
 Documentation/devicetree/bindings/i3c/i3c.txt | 140 ++++++++++++++++++++++++++
 1 file changed, 140 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i3c/i3c.txt

diff --git a/Documentation/devicetree/bindings/i3c/i3c.txt b/Documentation/devicetree/bindings/i3c/i3c.txt
new file mode 100644
index 000000000000..13b719f1ef15
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/i3c.txt
@@ -0,0 +1,140 @@
+Generic device tree bindings for I3C busses
+===========================================
+
+This document describes generic bindings that should be used to describe I3C
+busses in a device tree.
+
+Required properties
+-------------------
+
+- #address-cells  - should be <3>. Read more about addresses below.
+- #size-cells     - should be <0>.
+- compatible      - name of the I3C master controller driving the I3C bus
+
+For other required properties e.g. to describe register sets,
+clocks, etc. check the binding documentation of the specific driver.
+The node describing an I3C bus should be named i3c-master.
+
+Optional properties
+-------------------
+
+These properties may not be supported by all I3C master drivers. Each I3C
+master bindings should specify which of them are supported.
+
+- i3c-scl-hz: frequency of the SCL signal used for I3C transfers.
+	      When undefined the core sets it to 12.5MHz.
+
+- i2c-scl-hz: frequency of the SCL signal used for I2C transfers.
+	      When undefined, the core looks at LVR (Legacy Virtual Register)
+	      values of I2C devices described in the device tree to determine
+	      the maximum I2C frequency.
+
+I2C devices
+===========
+
+Each I2C device connected to the bus should be described in a subnode. All
+properties described in Documentation/devicetree/bindings/i2c/i2c.txt are
+valid here, but several new properties have been added.
+
+New constraint on existing properties:
+--------------------------------------
+- reg: contains 3 cells
+  + first cell : still encoding the I2C address
+
+  + second cell: should have bit 31 set to 1 to signify that this is an I2C
+		 device. Bits 0 to 7 encode the I3C LVR (Legacy Virtual
+		 Register):
+
+	bit[7:5]: I2C device index. Possible values
+	* 0: I2C device has a 50 ns spike filter
+	* 1: I2C device does not have a 50 ns spike filter but supports high
+	     frequency on SCL
+	* 2: I2C device does not have a 50 ns spike filter and is not tolerant
+	     to high frequencies
+	* 3-7: reserved
+
+	bit[4]: tell whether the device operates in FM (Fast Mode) or FM+ mode
+	* 0: FM+ mode
+	* 1: FM mode
+
+	bit[3:0]: device type
+	* 0-15: reserved
+
+  + third cell: should be 0
+
+I3C devices
+===========
+
+All I3C devices are supposed to support DAA (Dynamic Address Assignment), and
+are thus discoverable. So, by default, I3C devices do not have to be described
+in the device tree.
+This being said, one might want to attach extra resources to these devices,
+and those resources may have to be described in the device tree, which in turn
+means we have to describe I3C devices.
+
+Another use case for describing an I3C device in the device tree is when this
+I3C device has a static I2C address and we want to assign it a specific I3C
+dynamic address before the DAA takes place (so that other devices on the bus
+can't take this dynamic address).
+
+The I3C device should be names <device-type>@<static-i2c-address>,<i3c-pid>,
+where device-type is describing the type of device connected on the bus
+(gpio-controller, sensor, ...).
+
+Required properties
+-------------------
+- reg: contains 3 cells
+  + first cell : encodes the static I2C address. Should be 0 if the device does
+		 not have one (0 is not a valid I2C address).
+
+  + second and third cells: should encode the ProvisionalID. The second cell
+			    contains the manufacturer ID left-shifted by 1.
+			    The third cell contains ORing of the part ID
+			    left-shifted by 16, the instance ID left-shifted
+			    by 12 and the extra information. This encoding is
+			    following the PID definition provided by the I3C
+			    specification.
+
+Optional properties
+-------------------
+- assigned-address: dynamic address to be assigned to this device. This
+		    property is only valid if the I3C device has a static
+		    address (first cell of the reg property != 0).
+
+
+Example:
+
+	i3c-master@d040000 {
+		compatible = "cdns,i3c-master";
+		clocks = <&coreclock>, <&i3csysclock>;
+		clock-names = "pclk", "sysclk";
+		interrupts = <3 0>;
+		reg = <0x0d040000 0x1000>;
+		#address-cells = <3>;
+		#size-cells = <0>;
+
+		status = "okay";
+		i2c-scl-hz = <100000>;
+
+		/* I2C device. */
+		nunchuk: nunchuk@52 {
+			compatible = "nintendo,nunchuk";
+			reg = <0x52 0x80000010 0x0>;
+		};
+
+		/* I3C device with a static I2C address. */
+		thermal_sensor: sensor@68,39200144004 {
+			reg = <0x68 0x392 0x144004>;
+			assigned-address = <0xa>;
+		};
+
+		/*
+		 * I3C device without a static I2C address but requiring
+		 * resources described in the DT.
+		 */
+		sensor@0,39200154004 {
+			reg = <0x0 0x392 0x154004>;
+			clocks = <&clock_provider 0>;
+		};
+	};
+
-- 
2.14.1

^ permalink raw reply related	[flat|nested] 51+ messages in thread

* [PATCH v4 05/10] dt-bindings: i3c: Add macros to help fill I3C/I2C device's reg property
  2018-03-30  7:47 [PATCH v4 00/10] Add the I3C subsystem Boris Brezillon
                   ` (3 preceding siblings ...)
  2018-03-30  7:47 ` [PATCH v4 04/10] dt-bindings: i3c: Document core bindings Boris Brezillon
@ 2018-03-30  7:47 ` Boris Brezillon
  2018-03-30  7:47 ` [PATCH v4 06/10] MAINTAINERS: Add myself as the I3C subsystem maintainer Boris Brezillon
                   ` (5 subsequent siblings)
  10 siblings, 0 replies; 51+ messages in thread
From: Boris Brezillon @ 2018-03-30  7:47 UTC (permalink / raw)
  To: Wolfram Sang, linux-i2c, Jonathan Corbet, linux-doc,
	Greg Kroah-Hartman, Arnd Bergmann
  Cc: Przemyslaw Sroka, Arkadiusz Golec, Alan Douglas, Bartosz Folta,
	Damian Kos, Alicja Jurasik-Urbaniak, Cyprian Wronka,
	Suresh Punnoose, Rafal Ciepiela, Thomas Petazzoni,
	Nishanth Menon, Rob Herring, Pawel Moll, Mark Rutland,
	Ian Campbell, Kumar Gala, devicetree, linux-kernel, Vitor Soares,
	Geert Uytterhoeven, Linus Walleij, Xiang Lin, linux-gpio,
	Boris Brezillon

The reg property of devices connected to an I3C bus have 3 cells, and
filling them manually is not trivial. Provides macros to help doing
that.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 include/dt-bindings/i3c/i3c.h | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)
 create mode 100644 include/dt-bindings/i3c/i3c.h

diff --git a/include/dt-bindings/i3c/i3c.h b/include/dt-bindings/i3c/i3c.h
new file mode 100644
index 000000000000..97448c546649
--- /dev/null
+++ b/include/dt-bindings/i3c/i3c.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2017 Cadence Design Systems Inc.
+ *
+ * Author: Boris Brezillon <boris.brezillon@bootlin.com>
+ */
+
+#ifndef _DT_BINDINGS_I3C_I3C_H
+#define _DT_BINDINGS_I3C_I3C_H
+
+#define IS_I2C_DEV		0x80000000
+
+#define I2C_DEV(addr, lvr)					\
+	(addr) (IS_I2C_DEV | (lvr)) 0x0
+
+#define I3C_PID(manufid, partid, instid, extrainfo)		\
+	((manufid) << 1)					\
+	(((partid) << 16) | ((instid) << 12) | (extrainfo))
+
+#define I3C_DEV_WITH_STATIC_ADDR(addr, manufid, partid,		\
+				 instid, extrainfo)		\
+	(addr) I3C_PID(manufid, partid, instid, extrainfo)
+
+#define I3C_DEV(manufid, partid, instid, extrainfo)		\
+	I3C_DEV_WITH_STATIC_ADDR(0x0, manufid, partid,		\
+				 instid, extrainfo)
+
+#endif
-- 
2.14.1

^ permalink raw reply related	[flat|nested] 51+ messages in thread

* [PATCH v4 06/10] MAINTAINERS: Add myself as the I3C subsystem maintainer
  2018-03-30  7:47 [PATCH v4 00/10] Add the I3C subsystem Boris Brezillon
                   ` (4 preceding siblings ...)
  2018-03-30  7:47 ` [PATCH v4 05/10] dt-bindings: i3c: Add macros to help fill I3C/I2C device's reg property Boris Brezillon
@ 2018-03-30  7:47 ` Boris Brezillon
  2018-03-30  7:47 ` [PATCH v4 07/10] i3c: master: Add driver for Cadence IP Boris Brezillon
                   ` (4 subsequent siblings)
  10 siblings, 0 replies; 51+ messages in thread
From: Boris Brezillon @ 2018-03-30  7:47 UTC (permalink / raw)
  To: Wolfram Sang, linux-i2c, Jonathan Corbet, linux-doc,
	Greg Kroah-Hartman, Arnd Bergmann
  Cc: Przemyslaw Sroka, Arkadiusz Golec, Alan Douglas, Bartosz Folta,
	Damian Kos, Alicja Jurasik-Urbaniak, Cyprian Wronka,
	Suresh Punnoose, Rafal Ciepiela, Thomas Petazzoni,
	Nishanth Menon, Rob Herring, Pawel Moll, Mark Rutland,
	Ian Campbell, Kumar Gala, devicetree, linux-kernel, Vitor Soares,
	Geert Uytterhoeven, Linus Walleij, Xiang Lin, linux-gpio,
	Boris Brezillon

Create an entry for the I3C subsystem and mark it as maintained by me.
There's no official git repository, patchwork instance, mailing list or
website yet, but this will be added after the subsystem has been
accepted.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
---
 MAINTAINERS | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 3bdc260e36b7..f323864131ed 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6669,6 +6669,15 @@ L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/i2c-stub.c
 
+I3C SUBSYSTEM
+M:	Boris Brezillon <boris.brezillon@bootlin.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/i3c/
+F:	Documentation/driver-api/i3c
+F:	drivers/i3c/
+F:	include/linux/i3c/
+F:	include/dt-bindings/i3c/
+
 IA64 (Itanium) PLATFORM
 M:	Tony Luck <tony.luck@intel.com>
 M:	Fenghua Yu <fenghua.yu@intel.com>
-- 
2.14.1

^ permalink raw reply related	[flat|nested] 51+ messages in thread

* [PATCH v4 07/10] i3c: master: Add driver for Cadence IP
  2018-03-30  7:47 [PATCH v4 00/10] Add the I3C subsystem Boris Brezillon
                   ` (5 preceding siblings ...)
  2018-03-30  7:47 ` [PATCH v4 06/10] MAINTAINERS: Add myself as the I3C subsystem maintainer Boris Brezillon
@ 2018-03-30  7:47 ` Boris Brezillon
  2018-06-04  9:24   ` Przemyslaw Gaj
  2018-03-30  7:47 ` [PATCH v4 08/10] dt-bindings: i3c: Document Cadence I3C master bindings Boris Brezillon
                   ` (3 subsequent siblings)
  10 siblings, 1 reply; 51+ messages in thread
From: Boris Brezillon @ 2018-03-30  7:47 UTC (permalink / raw)
  To: Wolfram Sang, linux-i2c, Jonathan Corbet, linux-doc,
	Greg Kroah-Hartman, Arnd Bergmann
  Cc: Przemyslaw Sroka, Arkadiusz Golec, Alan Douglas, Bartosz Folta,
	Damian Kos, Alicja Jurasik-Urbaniak, Cyprian Wronka,
	Suresh Punnoose, Rafal Ciepiela, Thomas Petazzoni,
	Nishanth Menon, Rob Herring, Pawel Moll, Mark Rutland,
	Ian Campbell, Kumar Gala, devicetree, linux-kernel, Vitor Soares,
	Geert Uytterhoeven, Linus Walleij, Xiang Lin, linux-gpio,
	Boris Brezillon

Add a driver for Cadence I3C master IP.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
---
Changes in v4:
- Fix potential unsigned integer underflow
- Add missing static specific on IBI related functions

Changes in v3:
- Adjust to match I3C framework changes
- Implement support the CMD RESPONSE QUEUE and IBI QUEUE added in the
  latest revision of Cadence master IP
- Remove support for HDR modes

Changes in v2:
- Add basic IBI support. Note that the IP is not really reliable with
  regards to IBI because you can't extract IBI payloads as soon as you
  have more than one IBI waiting in the HW queue. This is something
  that will hopefully be addressed in future revisions of this IP
- Add a simple xfer queueing mechanism to optimize message queuing.
- Fix a few bugs
- Add support for Hot Join
---
 drivers/i3c/master/Kconfig           |    5 +
 drivers/i3c/master/Makefile          |    1 +
 drivers/i3c/master/i3c-master-cdns.c | 1650 ++++++++++++++++++++++++++++++++++
 3 files changed, 1656 insertions(+)
 create mode 100644 drivers/i3c/master/i3c-master-cdns.c

diff --git a/drivers/i3c/master/Kconfig b/drivers/i3c/master/Kconfig
index e69de29bb2d1..56b9a18543b2 100644
--- a/drivers/i3c/master/Kconfig
+++ b/drivers/i3c/master/Kconfig
@@ -0,0 +1,5 @@
+config CDNS_I3C_MASTER
+	tristate "Cadence I3C master driver"
+	depends on I3C
+	help
+	  Enable this driver if you want to support Cadence I3C master block.
diff --git a/drivers/i3c/master/Makefile b/drivers/i3c/master/Makefile
index e69de29bb2d1..4c4304aa9534 100644
--- a/drivers/i3c/master/Makefile
+++ b/drivers/i3c/master/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_CDNS_I3C_MASTER)		+= i3c-master-cdns.o
diff --git a/drivers/i3c/master/i3c-master-cdns.c b/drivers/i3c/master/i3c-master-cdns.c
new file mode 100644
index 000000000000..3940cc0a46e2
--- /dev/null
+++ b/drivers/i3c/master/i3c-master-cdns.c
@@ -0,0 +1,1650 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Cadence Design Systems Inc.
+ *
+ * Author: Boris Brezillon <boris.brezillon@bootlin.com>
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/i3c/master.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+
+#define DEV_ID				0x0
+#define DEV_ID_I3C_MASTER		0x5034
+
+#define CONF_STATUS0			0x4
+#define CONF_STATUS0_ECC_CHK		BIT(28)
+#define CONF_STATUS0_INTEG_CHK		BIT(27)
+#define CONF_STATUS0_CSR_DAP_CHK	BIT(26)
+#define CONF_STATUS0_TRANS_TOUT_CHK	BIT(25)
+#define CONF_STATUS0_PROT_FAULTS_CHK	BIT(24)
+#define CONF_STATUS0_GPO_NUM(x)		(((x) & GENMASK(23, 16)) >> 16)
+#define CONF_STATUS0_GPI_NUM(x)		(((x) & GENMASK(15, 8)) >> 8)
+#define CONF_STATUS0_SUPPORTS_DDR	BIT(5)
+#define CONF_STATUS0_SEC_MASTER		BIT(4)
+#define CONF_STATUS0_DEVS_NUM(x)	((x) & GENMASK(3, 0))
+
+#define CONF_STATUS1			0x8
+#define CONF_STATUS1_IBI_HW_RES(x)	((((x) & GENMASK(31, 28)) >> 28) + 1)
+#define CONF_STATUS1_CMD_DEPTH(x)	(4 << (((x) & GENMASK(27, 26)) >> 26))
+#define CONF_STATUS1_SLVDDR_RX_DEPTH(x)	(8 << (((x) & GENMASK(25, 21)) >> 21))
+#define CONF_STATUS1_SLVDDR_TX_DEPTH(x)	(8 << (((x) & GENMASK(20, 16)) >> 16))
+#define CONF_STATUS1_IBI_DEPTH(x)	(2 << (((x) & GENMASK(12, 10)) >> 10))
+#define CONF_STATUS1_RX_DEPTH(x)	(8 << (((x) & GENMASK(9, 5)) >> 5))
+#define CONF_STATUS1_TX_DEPTH(x)	(8 << ((x) & GENMASK(4, 0)))
+
+#define REV_ID				0xc
+#define REV_ID_VID(id)			(((id) & GENMASK(31, 20)) >> 20)
+#define REV_ID_PID(id)			(((id) & GENMASK(19, 8)) >> 8)
+#define REV_ID_REV_MAJOR(id)		(((id) & GENMASK(7, 4)) >> 4)
+#define REV_ID_REV_MINOR(id)		((id) & GENMASK(3, 0))
+
+#define CTRL				0x10
+#define CTRL_DEV_EN			BIT(31)
+#define CTRL_HALT_EN			BIT(30)
+#define CTRL_MCS			BIT(29)
+#define CTRL_MCS_EN			BIT(28)
+#define CTRL_HJ_DISEC			BIT(8)
+#define CTRL_MST_ACK			BIT(7)
+#define CTRL_HJ_ACK			BIT(6)
+#define CTRL_HJ_INIT			BIT(5)
+#define CTRL_MST_INIT			BIT(4)
+#define CTRL_AHDR_OPT			BIT(3)
+#define CTRL_PURE_BUS_MODE		0
+#define CTRL_MIXED_FAST_BUS_MODE	2
+#define CTRL_MIXED_SLOW_BUS_MODE	3
+#define CTRL_BUS_MODE_MASK		GENMASK(1, 0)
+
+#define PRESCL_CTRL0			0x14
+#define PRESCL_CTRL0_I2C(x)		((x) << 16)
+#define PRESCL_CTRL0_I3C(x)		(x)
+#define PRESCL_CTRL0_MAX		GENMASK(9, 0)
+
+#define PRESCL_CTRL1			0x18
+#define PRESCL_CTRL1_PP_LOW_MASK	GENMASK(15, 8)
+#define PRESCL_CTRL1_PP_LOW(x)		((x) << 8)
+#define PRESCL_CTRL1_OD_LOW_MASK	GENMASK(7, 0)
+#define PRESCL_CTRL1_OD_LOW(x)		(x)
+
+#define MST_IER				0x20
+#define MST_IDR				0x24
+#define MST_IMR				0x28
+#define MST_ICR				0x2c
+#define MST_ISR				0x30
+#define MST_INT_HALTED			BIT(18)
+#define MST_INT_MR_DONE			BIT(17)
+#define MST_INT_IMM_COMP		BIT(16)
+#define MST_INT_TX_THR			BIT(15)
+#define MST_INT_TX_OVF			BIT(14)
+#define MST_INT_IBID_THR		BIT(12)
+#define MST_INT_IBID_UNF		BIT(11)
+#define MST_INT_IBIR_THR		BIT(10)
+#define MST_INT_IBIR_UNF		BIT(9)
+#define MST_INT_IBIR_OVF		BIT(8)
+#define MST_INT_RX_THR			BIT(7)
+#define MST_INT_RX_UNF			BIT(6)
+#define MST_INT_CMDD_EMP		BIT(5)
+#define MST_INT_CMDD_THR		BIT(4)
+#define MST_INT_CMDD_OVF		BIT(3)
+#define MST_INT_CMDR_THR		BIT(2)
+#define MST_INT_CMDR_UNF		BIT(1)
+#define MST_INT_CMDR_OVF		BIT(0)
+
+#define MST_STATUS0			0x34
+#define MST_STATUS0_IDLE		BIT(18)
+#define MST_STATUS0_HALTED		BIT(17)
+#define MST_STATUS0_MASTER_MODE		BIT(16)
+#define MST_STATUS0_TX_FULL		BIT(13)
+#define MST_STATUS0_IBID_FULL		BIT(12)
+#define MST_STATUS0_IBIR_FULL		BIT(11)
+#define MST_STATUS0_RX_FULL		BIT(10)
+#define MST_STATUS0_CMDD_FULL		BIT(9)
+#define MST_STATUS0_CMDR_FULL		BIT(8)
+#define MST_STATUS0_TX_EMP		BIT(5)
+#define MST_STATUS0_IBID_EMP		BIT(4)
+#define MST_STATUS0_IBIR_EMP		BIT(3)
+#define MST_STATUS0_RX_EMP		BIT(2)
+#define MST_STATUS0_CMDD_EMP		BIT(1)
+#define MST_STATUS0_CMDR_EMP		BIT(0)
+
+#define CMDR				0x38
+#define CMDR_NO_ERROR			0
+#define CMDR_DDR_PREAMBLE_ERROR		1
+#define CMDR_DDR_PARITY_ERROR		2
+#define CMDR_DDR_RX_FIFO_OVF		3
+#define CMDR_DDR_TX_FIFO_UNF		4
+#define CMDR_M0_ERROR			5
+#define CMDR_M1_ERROR			6
+#define CMDR_M2_ERROR			7
+#define CMDR_MST_ABORT			8
+#define CMDR_NACK_RESP			9
+#define CMDR_INVALID_DA			10
+#define CMDR_DDR_DROPPED		11
+#define CMDR_ERROR(x)			(((x) & GENMASK(27, 24)) >> 24)
+#define CMDR_XFER_BYTES(x)		(((x) & GENMASK(19, 8)) >> 8)
+#define CMDR_CMDID_HJACK_DISEC		0xfe
+#define CMDR_CMDID_HJACK_ENTDAA		0xff
+#define CMDR_CMDID(x)			((x) & GENMASK(7, 0))
+
+#define IBIR				0x3c
+#define IBIR_ACKED			BIT(12)
+#define IBIR_SLVID(x)			(((x) & GENMASK(11, 8)) >> 8)
+#define IBIR_ERROR			BIT(7)
+#define IBIR_XFER_BYTES(x)		(((x) & GENMASK(6, 2)) >> 2)
+#define IBIR_TYPE_IBI			0
+#define IBIR_TYPE_HJ			1
+#define IBIR_TYPE_MR			2
+#define IBIR_TYPE(x)			((x) & GENMASK(1, 0))
+
+#define SLV_IER				0x40
+#define SLV_IDR				0x44
+#define SLV_IMR				0x48
+#define SLV_ICR				0x4c
+#define SLV_ISR				0x50
+#define SLV_INT_TM			BIT(20)
+#define SLV_INT_ERROR			BIT(19)
+#define SLV_INT_EVENT_UP		BIT(18)
+#define SLV_INT_HJ_DONE			BIT(17)
+#define SLV_INT_MR_DONE			BIT(16)
+#define SLV_INT_DA_UPD			BIT(15)
+#define SLV_INT_SDR_FAIL		BIT(14)
+#define SLV_INT_DDR_FAIL		BIT(13)
+#define SLV_INT_M_RD_ABORT		BIT(12)
+#define SLV_INT_DDR_RX_THR		BIT(11)
+#define SLV_INT_DDR_TX_THR		BIT(10)
+#define SLV_INT_SDR_RX_THR		BIT(9)
+#define SLV_INT_SDR_TX_THR		BIT(8)
+#define SLV_INT_DDR_RX_UNF		BIT(7)
+#define SLV_INT_DDR_TX_OVF		BIT(6)
+#define SLV_INT_SDR_RX_UNF		BIT(5)
+#define SLV_INT_SDR_TX_OVF		BIT(4)
+#define SLV_INT_DDR_RD_COMP		BIT(3)
+#define SLV_INT_DDR_WR_COMP		BIT(2)
+#define SLV_INT_SDR_RD_COMP		BIT(1)
+#define SLV_INT_SDR_WR_COMP		BIT(0)
+
+#define SLV_STATUS0			0x54
+#define SLV_STATUS0_REG_ADDR(s)		(((s) & GENMASK(23, 16)) >> 16)
+#define SLV_STATUS0_XFRD_BYTES(s)	((s) & GENMASK(15, 0))
+
+#define SLV_STATUS1			0x58
+#define SLV_STATUS1_AS(s)		(((s) & GENMASK(21, 20)) >> 20)
+#define SLV_STATUS1_VEN_TM		BIT(19)
+#define SLV_STATUS1_HJ_DIS		BIT(18)
+#define SLV_STATUS1_MR_DIS		BIT(17)
+#define SLV_STATUS1_PROT_ERR		BIT(16)
+#define SLV_STATUS1_DA(x)		(((s) & GENMASK(15, 9)) >> 9)
+#define SLV_STATUS1_HAS_DA		BIT(8)
+#define SLV_STATUS1_DDR_RX_FULL		BIT(7)
+#define SLV_STATUS1_DDR_TX_FULL		BIT(6)
+#define SLV_STATUS1_DDR_RX_EMPTY	BIT(5)
+#define SLV_STATUS1_DDR_TX_EMPTY	BIT(4)
+#define SLV_STATUS1_SDR_RX_FULL		BIT(3)
+#define SLV_STATUS1_SDR_TX_FULL		BIT(2)
+#define SLV_STATUS1_SDR_RX_EMPTY	BIT(1)
+#define SLV_STATUS1_SDR_TX_EMPTY	BIT(0)
+
+#define CMD0_FIFO			0x60
+#define CMD0_FIFO_IS_DDR		BIT(31)
+#define CMD0_FIFO_IS_CCC		BIT(30)
+#define CMD0_FIFO_BCH			BIT(29)
+#define XMIT_BURST_STATIC_SUBADDR	0
+#define XMIT_SINGLE_INC_SUBADDR		1
+#define XMIT_SINGLE_STATIC_SUBADDR	2
+#define XMIT_BURST_WITHOUT_SUBADDR	3
+#define CMD0_FIFO_PRIV_XMIT_MODE(m)	((m) << 27)
+#define CMD0_FIFO_SBCA			BIT(26)
+#define CMD0_FIFO_RSBC			BIT(25)
+#define CMD0_FIFO_IS_10B		BIT(24)
+#define CMD0_FIFO_PL_LEN(l)		((l) << 12)
+#define CMD0_FIFO_PL_LEN_MAX		4095
+#define CMD0_FIFO_DEV_ADDR(a)		((a) << 1)
+#define CMD0_FIFO_RNW			BIT(0)
+
+#define CMD1_FIFO			0x64
+#define CMD1_FIFO_CMDID(id)		((id) << 24)
+#define CMD1_FIFO_CSRADDR(a)		(a)
+#define CMD1_FIFO_CCC(id)		(id)
+
+#define TX_FIFO				0x68
+
+#define IMD_CMD0			0x70
+#define IMD_CMD0_PL_LEN(l)		((l) << 12)
+#define IMD_CMD0_DEV_ADDR(a)		((a) << 1)
+#define IMD_CMD0_RNW			BIT(0)
+
+#define IMD_CMD1			0x74
+#define IMD_CMD1_CCC(id)		(id)
+
+#define IMD_DATA			0x78
+#define RX_FIFO				0x80
+#define IBI_DATA_FIFO			0x84
+#define SLV_DDR_TX_FIFO			0x88
+#define SLV_DDR_RX_FIFO			0x8c
+
+#define CMD_IBI_THR_CTRL		0x90
+#define IBIR_THR(t)			((t) << 24)
+#define CMDR_THR(t)			((t) << 16)
+#define IBI_THR(t)			((t) << 8)
+#define CMD_THR(t)			(t)
+
+#define TX_RX_THR_CTRL			0x94
+#define RX_THR(t)			((t) << 16)
+#define TX_THR(t)			(t)
+
+#define SLV_DDR_TX_RX_THR_CTRL		0x98
+#define SLV_DDR_RX_THR(t)		((t) << 16)
+#define SLV_DDR_TX_THR(t)		(t)
+
+#define FLUSH_CTRL			0x9c
+#define FLUSH_IBI_RESP			BIT(23)
+#define FLUSH_CMD_RESP			BIT(22)
+#define FLUSH_SLV_DDR_RX_FIFO		BIT(22)
+#define FLUSH_SLV_DDR_TX_FIFO		BIT(21)
+#define FLUSH_IMM_FIFO			BIT(20)
+#define FLUSH_IBI_FIFO			BIT(19)
+#define FLUSH_RX_FIFO			BIT(18)
+#define FLUSH_TX_FIFO			BIT(17)
+#define FLUSH_CMD_FIFO			BIT(16)
+
+#define TTO_PRESCL_CTRL0		0xb0
+#define TTO_PRESCL_CTRL0_DIVB(x)	((x) << 16)
+#define TTO_PRESCL_CTRL0_DIVA(x)	(x)
+
+#define TTO_PRESCL_CTRL1		0xb4
+#define TTO_PRESCL_CTRL1_DIVB(x)	((x) << 16)
+#define TTO_PRESCL_CTRL1_DIVA(x)	(x)
+
+#define DEVS_CTRL			0xb8
+#define DEVS_CTRL_DEV_CLR_SHIFT		16
+#define DEVS_CTRL_DEV_CLR_ALL		GENMASK(31, 16)
+#define DEVS_CTRL_DEV_CLR(dev)		BIT(16 + (dev))
+#define DEVS_CTRL_DEV_ACTIVE(dev)	BIT(dev)
+#define DEVS_CTRL_DEVS_ACTIVE_MASK	GENMASK(15, 0)
+#define MAX_DEVS			16
+
+#define DEV_ID_RR0(d)			(0xc0 + ((d) * 0x10))
+#define DEV_ID_RR0_LVR_EXT_ADDR		BIT(11)
+#define DEV_ID_RR0_HDR_CAP		BIT(10)
+#define DEV_ID_RR0_IS_I3C		BIT(9)
+#define DEV_ID_RR0_DEV_ADDR_MASK	(GENMASK(6, 0) | GENMASK(15, 13))
+#define DEV_ID_RR0_SET_DEV_ADDR(a)	(((a) & GENMASK(6, 0)) |	\
+					 (((a) & GENMASK(9, 7)) << 6))
+#define DEV_ID_RR0_GET_DEV_ADDR(x)	((((x) >> 1) & GENMASK(6, 0)) |	\
+					 (((x) >> 6) & GENMASK(9, 7)))
+
+#define DEV_ID_RR1(d)			(0xc4 + ((d) * 0x10))
+#define DEV_ID_RR1_PID_MSB(pid)		(pid)
+
+#define DEV_ID_RR2(d)			(0xc8 + ((d) * 0x10))
+#define DEV_ID_RR2_PID_LSB(pid)		((pid) << 16)
+#define DEV_ID_RR2_BCR(bcr)		((bcr) << 8)
+#define DEV_ID_RR2_DCR(dcr)		(dcr)
+#define DEV_ID_RR2_LVR(lvr)		(lvr)
+
+#define SIR_MAP(x)			(0x180 + ((x) * 4))
+#define SIR_MAP_DEV_REG(d)		SIR_MAP((d) / 2)
+#define SIR_MAP_DEV_SHIFT(d, fs)	((fs) + (((d) % 2) ? 16 : 0))
+#define SIR_MAP_DEV_CONF_MASK(d)	(GENMASK(15, 0) << (((d) % 2) ? 16 : 0))
+#define SIR_MAP_DEV_CONF(d, c)		((c) << (((d) % 2) ? 16 : 0))
+#define DEV_ROLE_SLAVE			0
+#define DEV_ROLE_MASTER			1
+#define SIR_MAP_DEV_ROLE(role)		((role) << 14)
+#define SIR_MAP_DEV_SLOW		BIT(13)
+#define SIR_MAP_DEV_PL(l)		((l) << 8)
+#define SIR_MAP_PL_MAX			GENMASK(4, 0)
+#define SIR_MAP_DEV_DA(a)		((a) << 1)
+#define SIR_MAP_DEV_ACK			BIT(0)
+
+#define GPIR_WORD(x)			(0x200 + ((x) * 4))
+#define GPI_REG(val, id)		\
+	(((val) >> (((id) % 4) * 8)) & GENMASK(7, 0))
+
+#define GPOR_WORD(x)			(0x220 + ((x) * 4))
+#define GPO_REG(val, id)		\
+	(((val) >> (((id) % 4) * 8)) & GENMASK(7, 0))
+
+#define ASF_INT_STATUS			0x300
+#define ASF_INT_RAW_STATUS		0x304
+#define ASF_INT_MASK			0x308
+#define ASF_INT_TEST			0x30c
+#define ASF_INT_FATAL_SELECT		0x310
+#define ASF_INTEGRITY_ERR		BIT(6)
+#define ASF_PROTOCOL_ERR		BIT(5)
+#define ASF_TRANS_TIMEOUT_ERR		BIT(4)
+#define ASF_CSR_ERR			BIT(3)
+#define ASF_DAP_ERR			BIT(2)
+#define ASF_SRAM_UNCORR_ERR		BIT(1)
+#define ASF_SRAM_CORR_ERR		BIT(0)
+
+#define ASF_SRAM_CORR_FAULT_STATUS	0x320
+#define ASF_SRAM_UNCORR_FAULT_STATUS	0x324
+#define ASF_SRAM_CORR_FAULT_INSTANCE(x)	((x) >> 24)
+#define ASF_SRAM_CORR_FAULT_ADDR(x)	((x) & GENMASK(23, 0))
+
+#define ASF_SRAM_FAULT_STATS		0x328
+#define ASF_SRAM_FAULT_UNCORR_STATS(x)	((x) >> 16)
+#define ASF_SRAM_FAULT_CORR_STATS(x)	((x) & GENMASK(15, 0))
+
+#define ASF_TRANS_TOUT_CTRL		0x330
+#define ASF_TRANS_TOUT_EN		BIT(31)
+#define ASF_TRANS_TOUT_VAL(x)	(x)
+
+#define ASF_TRANS_TOUT_FAULT_MASK	0x334
+#define ASF_TRANS_TOUT_FAULT_STATUS	0x338
+#define ASF_TRANS_TOUT_FAULT_APB	BIT(3)
+#define ASF_TRANS_TOUT_FAULT_SCL_LOW	BIT(2)
+#define ASF_TRANS_TOUT_FAULT_SCL_HIGH	BIT(1)
+#define ASF_TRANS_TOUT_FAULT_FSCL_HIGH	BIT(0)
+
+#define ASF_PROTO_FAULT_MASK		0x340
+#define ASF_PROTO_FAULT_STATUS		0x344
+#define ASF_PROTO_FAULT_SLVSDR_RD_ABORT	BIT(31)
+#define ASF_PROTO_FAULT_SLVDDR_FAIL	BIT(30)
+#define ASF_PROTO_FAULT_S(x)		BIT(16 + (x))
+#define ASF_PROTO_FAULT_MSTSDR_RD_ABORT	BIT(15)
+#define ASF_PROTO_FAULT_MSTDDR_FAIL	BIT(14)
+#define ASF_PROTO_FAULT_M(x)		BIT(x)
+
+struct cdns_i3c_master_caps {
+	u32 cmdfifodepth;
+	u32 cmdrfifodepth;
+	u32 txfifodepth;
+	u32 rxfifodepth;
+	u32 ibirfifodepth;
+};
+
+struct cdns_i3c_cmd {
+	u32 cmd0;
+	u32 cmd1;
+	u32 tx_len;
+	const void *tx_buf;
+	u32 rx_len;
+	void *rx_buf;
+	u32 error;
+};
+
+struct cdns_i3c_xfer {
+	struct list_head node;
+	struct completion comp;
+	int ret;
+	unsigned int ncmds;
+	struct cdns_i3c_cmd cmds[0];
+};
+
+struct cdns_i3c_master {
+	struct work_struct hj_work;
+	struct i3c_master_controller base;
+	u32 free_rr_slots;
+	unsigned int maxdevs;
+	struct {
+		unsigned int num_slots;
+		struct i3c_device **slots;
+		spinlock_t lock;
+	} ibi;
+	struct {
+		struct list_head list;
+		struct cdns_i3c_xfer *cur;
+		spinlock_t lock;
+	} xferqueue;
+	void __iomem *regs;
+	struct clk *sysclk;
+	struct clk *pclk;
+	struct cdns_i3c_master_caps caps;
+	unsigned long i3c_scl_lim;
+};
+
+static inline struct cdns_i3c_master *
+to_cdns_i3c_master(struct i3c_master_controller *master)
+{
+	return container_of(master, struct cdns_i3c_master, base);
+}
+
+static void cdns_i3c_master_wr_to_tx_fifo(struct cdns_i3c_master *master,
+					  const u8 *bytes, int nbytes)
+{
+	int i, j;
+
+	for (i = 0; i < nbytes; i += 4) {
+		u32 data = 0;
+
+		for (j = 0; j < 4 && (i + j) < nbytes; j++)
+			data |= (u32)bytes[i + j] << (j * 8);
+
+		writel(data, master->regs + TX_FIFO);
+	}
+}
+
+static void cdns_i3c_master_rd_from_rx_fifo(struct cdns_i3c_master *master,
+					    u8 *bytes, int nbytes)
+{
+	int i, j;
+
+	for (i = 0; i < nbytes; i += 4) {
+		u32 data;
+
+		data = readl(master->regs + RX_FIFO);
+
+		for (j = 0; j < 4 && (i + j) < nbytes; j++)
+			bytes[i + j] = data >> (j * 8);
+	}
+}
+
+static bool cdns_i3c_master_supports_ccc_cmd(struct i3c_master_controller *m,
+					     const struct i3c_ccc_cmd *cmd)
+{
+	if (cmd->ndests > 1)
+		return false;
+
+	switch (cmd->id) {
+	case I3C_CCC_ENEC(true):
+	case I3C_CCC_ENEC(false):
+	case I3C_CCC_DISEC(true):
+	case I3C_CCC_DISEC(false):
+	case I3C_CCC_ENTAS(0, true):
+	case I3C_CCC_ENTAS(0, false):
+	case I3C_CCC_RSTDAA(true):
+	case I3C_CCC_RSTDAA(false):
+	case I3C_CCC_ENTDAA:
+	case I3C_CCC_SETMWL(true):
+	case I3C_CCC_SETMWL(false):
+	case I3C_CCC_SETMRL(true):
+	case I3C_CCC_SETMRL(false):
+	case I3C_CCC_DEFSLVS:
+	case I3C_CCC_ENTHDR(0):
+	case I3C_CCC_SETDASA:
+	case I3C_CCC_SETNEWDA:
+	case I3C_CCC_GETMWL:
+	case I3C_CCC_GETMRL:
+	case I3C_CCC_GETPID:
+	case I3C_CCC_GETBCR:
+	case I3C_CCC_GETDCR:
+	case I3C_CCC_GETSTATUS:
+	case I3C_CCC_GETACCMST:
+	case I3C_CCC_GETMXDS:
+	case I3C_CCC_GETHDRCAP:
+		return true;
+	default:
+		break;
+	}
+
+	return false;
+}
+
+static int cdns_i3c_master_disable(struct cdns_i3c_master *master)
+{
+	u32 status;
+
+	writel(readl(master->regs + CTRL) & ~CTRL_DEV_EN, master->regs + CTRL);
+
+	return readl_poll_timeout(master->regs + MST_STATUS0, status,
+				  status & MST_STATUS0_IDLE, 10, 1000000);
+}
+
+static void cdns_i3c_master_enable(struct cdns_i3c_master *master)
+{
+	writel(readl(master->regs + CTRL) | CTRL_DEV_EN, master->regs + CTRL);
+}
+
+static struct cdns_i3c_xfer *
+cdns_i3c_master_alloc_xfer(struct cdns_i3c_master *master, unsigned int ncmds)
+{
+	struct cdns_i3c_xfer *xfer;
+
+	xfer = kzalloc(sizeof(*xfer) + (ncmds * sizeof(*xfer->cmds)),
+		       GFP_KERNEL);
+	if (!xfer)
+		return NULL;
+
+	INIT_LIST_HEAD(&xfer->node);
+	xfer->ncmds = ncmds;
+	xfer->ret = -ETIMEDOUT;
+
+	return xfer;
+}
+
+static void cdns_i3c_master_free_xfer(struct cdns_i3c_xfer *xfer)
+{
+	kfree(xfer);
+}
+
+static void cdns_i3c_master_start_xfer_locked(struct cdns_i3c_master *master)
+{
+	struct cdns_i3c_xfer *xfer = master->xferqueue.cur;
+	unsigned int i;
+
+	if (!xfer)
+		return;
+
+	writel(MST_INT_CMDD_EMP, master->regs + MST_ICR);
+	for (i = 0; i < xfer->ncmds; i++) {
+		struct cdns_i3c_cmd *cmd = &xfer->cmds[i];
+
+		cdns_i3c_master_wr_to_tx_fifo(master, cmd->tx_buf,
+					      cmd->tx_len);
+	}
+
+	for (i = 0; i < xfer->ncmds; i++) {
+		struct cdns_i3c_cmd *cmd = &xfer->cmds[i];
+
+		writel(cmd->cmd1 | CMD1_FIFO_CMDID(i),
+		       master->regs + CMD1_FIFO);
+		writel(cmd->cmd0, master->regs + CMD0_FIFO);
+	}
+
+	writel(readl(master->regs + CTRL) | CTRL_MCS,
+	       master->regs + CTRL);
+	writel(MST_INT_CMDD_EMP, master->regs + MST_IER);
+}
+
+static void cdns_i3c_master_end_xfer_locked(struct cdns_i3c_master *master,
+					    u32 isr)
+{
+	struct cdns_i3c_xfer *xfer = master->xferqueue.cur;
+	int i, ret = 0;
+	u32 status0;
+
+	if (!xfer)
+		return;
+
+	if (!(isr & MST_INT_CMDD_EMP))
+		return;
+
+	writel(MST_INT_CMDD_EMP, master->regs + MST_IDR);
+
+	for (status0 = readl(master->regs + MST_STATUS0);
+	     !(status0 & MST_STATUS0_CMDR_EMP);
+	     status0 = readl(master->regs + MST_STATUS0)) {
+		struct cdns_i3c_cmd *cmd;
+		u32 cmdr, rx_len, id;
+
+		cmdr = readl(master->regs + CMDR);
+		id = CMDR_CMDID(cmdr);
+		if (id == CMDR_CMDID_HJACK_DISEC ||
+		    id == CMDR_CMDID_HJACK_ENTDAA ||
+		    WARN_ON(id >= xfer->ncmds))
+			continue;
+
+		cmd = &xfer->cmds[CMDR_CMDID(cmdr)];
+		rx_len = min_t(u32, CMDR_XFER_BYTES(cmdr), cmd->rx_len);
+		cdns_i3c_master_rd_from_rx_fifo(master, cmd->rx_buf, rx_len);
+		cmd->error = CMDR_ERROR(cmdr);
+	}
+
+	for (i = 0; i < xfer->ncmds; i++) {
+		switch (xfer->cmds[i].error) {
+		case CMDR_NO_ERROR:
+			break;
+
+		case CMDR_DDR_PREAMBLE_ERROR:
+		case CMDR_DDR_PARITY_ERROR:
+		case CMDR_M0_ERROR:
+		case CMDR_M1_ERROR:
+		case CMDR_M2_ERROR:
+		case CMDR_MST_ABORT:
+		case CMDR_NACK_RESP:
+		case CMDR_DDR_DROPPED:
+			ret = -EIO;
+			break;
+
+		case CMDR_DDR_RX_FIFO_OVF:
+		case CMDR_DDR_TX_FIFO_UNF:
+			ret = -ENOSPC;
+			break;
+
+		case CMDR_INVALID_DA:
+		default:
+			ret = -EINVAL;
+			break;
+		}
+	}
+
+	xfer->ret = ret;
+	complete(&xfer->comp);
+
+	xfer = list_first_entry_or_null(&master->xferqueue.list,
+					struct cdns_i3c_xfer, node);
+	if (xfer)
+		list_del_init(&xfer->node);
+
+	master->xferqueue.cur = xfer;
+	cdns_i3c_master_start_xfer_locked(master);
+}
+
+static void cdns_i3c_master_queue_xfer(struct cdns_i3c_master *master,
+				       struct cdns_i3c_xfer *xfer)
+{
+	unsigned long flags;
+
+	init_completion(&xfer->comp);
+	spin_lock_irqsave(&master->xferqueue.lock, flags);
+	if (master->xferqueue.cur) {
+		list_add_tail(&xfer->node, &master->xferqueue.list);
+	} else {
+		master->xferqueue.cur = xfer;
+		cdns_i3c_master_start_xfer_locked(master);
+	}
+	spin_unlock_irqrestore(&master->xferqueue.lock, flags);
+}
+
+static void cdns_i3c_master_unqueue_xfer(struct cdns_i3c_master *master,
+					 struct cdns_i3c_xfer *xfer)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&master->xferqueue.lock, flags);
+	if (master->xferqueue.cur == xfer) {
+		u32 status;
+
+		writel(readl(master->regs + CTRL) & ~CTRL_DEV_EN,
+		       master->regs + CTRL);
+		readl_poll_timeout_atomic(master->regs + MST_STATUS0, status,
+					  status & MST_STATUS0_IDLE, 10,
+					  1000000);
+		master->xferqueue.cur = NULL;
+		writel(FLUSH_RX_FIFO | FLUSH_TX_FIFO | FLUSH_CMD_FIFO |
+		       FLUSH_CMD_RESP,
+		       master->regs + FLUSH_CTRL);
+		writel(MST_INT_CMDD_EMP, master->regs + MST_IDR);
+		writel(readl(master->regs + CTRL) | CTRL_DEV_EN,
+		       master->regs + CTRL);
+	} else {
+		list_del_init(&xfer->node);
+	}
+	spin_unlock_irqrestore(&master->xferqueue.lock, flags);
+}
+
+static int cdns_i3c_master_send_ccc_cmd(struct i3c_master_controller *m,
+					struct i3c_ccc_cmd *cmd)
+{
+	struct cdns_i3c_master *master = to_cdns_i3c_master(m);
+	struct cdns_i3c_xfer *xfer;
+	struct cdns_i3c_cmd *ccmd;
+	int ret;
+
+	xfer = cdns_i3c_master_alloc_xfer(master, 1);
+	if (!xfer)
+		return -ENOMEM;
+
+	ccmd = xfer->cmds;
+	ccmd->cmd1 = CMD1_FIFO_CCC(cmd->id);
+	ccmd->cmd0 = CMD0_FIFO_IS_CCC |
+		     CMD0_FIFO_PL_LEN(cmd->dests[0].payload.len);
+
+	if (cmd->id & I3C_CCC_DIRECT)
+		ccmd->cmd0 |= CMD0_FIFO_DEV_ADDR(cmd->dests[0].addr);
+
+	if (cmd->rnw) {
+		ccmd->cmd0 |= CMD0_FIFO_RNW;
+		ccmd->rx_buf = cmd->dests[0].payload.data;
+		ccmd->rx_len = cmd->dests[0].payload.len;
+	} else {
+		ccmd->tx_buf = cmd->dests[0].payload.data;
+		ccmd->tx_len = cmd->dests[0].payload.len;
+	}
+
+	cdns_i3c_master_queue_xfer(master, xfer);
+	if (!wait_for_completion_timeout(&xfer->comp, msecs_to_jiffies(1000)))
+		cdns_i3c_master_unqueue_xfer(master, xfer);
+
+	ret = xfer->ret;
+	cdns_i3c_master_free_xfer(xfer);
+
+	return ret;
+}
+
+static int cdns_i3c_master_priv_xfers(struct i3c_device *dev,
+				      const struct i3c_priv_xfer *xfers,
+				      int nxfers)
+{
+	struct i3c_master_controller *m = i3c_device_get_master(dev);
+	struct cdns_i3c_master *master = to_cdns_i3c_master(m);
+	int txslots = 0, rxslots = 0, i, ret;
+	struct cdns_i3c_xfer *cdns_xfer;
+
+	for (i = 0; i < nxfers; i++) {
+		if (xfers[i].len > CMD0_FIFO_PL_LEN_MAX)
+			return -ENOTSUPP;
+	}
+
+	if (!nxfers)
+		return 0;
+
+	if (nxfers > master->caps.cmdfifodepth ||
+	    nxfers > master->caps.cmdrfifodepth)
+		return -ENOTSUPP;
+
+	/*
+	 * First make sure that all transactions (block of transfers separated
+	 * by a STOP marker) fit in the FIFOs.
+	 */
+	for (i = 0; i < nxfers; i++) {
+		if (xfers[i].rnw)
+			rxslots += DIV_ROUND_UP(xfers[i].len, 4);
+		else
+			txslots += DIV_ROUND_UP(xfers[i].len, 4);
+	}
+
+	if (rxslots > master->caps.rxfifodepth ||
+	    txslots > master->caps.txfifodepth)
+		return -ENOTSUPP;
+
+	cdns_xfer = cdns_i3c_master_alloc_xfer(master, nxfers);
+	if (!cdns_xfer)
+		return -ENOMEM;
+
+	for (i = 0; i < nxfers; i++) {
+		struct cdns_i3c_cmd *ccmd = &cdns_xfer->cmds[i];
+		u32 pl_len = xfers[i].len;
+
+		ccmd->cmd0 = CMD0_FIFO_DEV_ADDR(dev->info.dyn_addr) |
+			CMD0_FIFO_PRIV_XMIT_MODE(XMIT_BURST_WITHOUT_SUBADDR);
+
+		if (xfers[i].rnw) {
+			ccmd->cmd0 |= CMD0_FIFO_RNW;
+			ccmd->rx_buf = xfers[i].data.in;
+			ccmd->rx_len = xfers[i].len;
+			pl_len++;
+		} else {
+			ccmd->tx_buf = xfers[i].data.out;
+			ccmd->tx_len = xfers[i].len;
+		}
+
+		ccmd->cmd0 |= CMD0_FIFO_PL_LEN(pl_len);
+
+		if (i < nxfers - 1)
+			ccmd->cmd0 |= CMD0_FIFO_RSBC;
+
+		if (!i)
+			ccmd->cmd0 |= CMD0_FIFO_BCH;
+	}
+
+	cdns_i3c_master_queue_xfer(master, cdns_xfer);
+	if (!wait_for_completion_timeout(&cdns_xfer->comp,
+					 msecs_to_jiffies(1000)))
+		cdns_i3c_master_unqueue_xfer(master, cdns_xfer);
+
+	ret = cdns_xfer->ret;
+	cdns_i3c_master_free_xfer(cdns_xfer);
+
+	return ret;
+}
+
+static int cdns_i3c_master_i2c_xfers(struct i2c_device *dev,
+				     const struct i2c_msg *xfers, int nxfers)
+{
+	struct i3c_master_controller *m = i2c_device_get_master(dev);
+	struct cdns_i3c_master *master = to_cdns_i3c_master(m);
+	unsigned int nrxwords = 0, ntxwords = 0;
+	struct cdns_i3c_xfer *xfer;
+	int i, ret = 0;
+
+	if (nxfers > master->caps.cmdfifodepth)
+		return -ENOTSUPP;
+
+	for (i = 0; i < nxfers; i++) {
+		if (xfers[i].len > CMD0_FIFO_PL_LEN_MAX)
+			return -ENOTSUPP;
+
+		if (xfers[i].flags & I2C_M_RD)
+			nrxwords += DIV_ROUND_UP(xfers[i].len, 4);
+		else
+			ntxwords += DIV_ROUND_UP(xfers[i].len, 4);
+	}
+
+	if (ntxwords > master->caps.txfifodepth ||
+	    nrxwords > master->caps.rxfifodepth)
+		return -ENOTSUPP;
+
+	xfer = cdns_i3c_master_alloc_xfer(master, nxfers);
+	if (!xfer)
+		return -ENOMEM;
+
+	for (i = 0; i < nxfers; i++) {
+		struct cdns_i3c_cmd *ccmd = &xfer->cmds[0];
+
+		ccmd->cmd0 = CMD0_FIFO_DEV_ADDR(xfers[i].addr) |
+			CMD0_FIFO_PL_LEN(xfers[i].len) |
+			CMD0_FIFO_PRIV_XMIT_MODE(XMIT_BURST_WITHOUT_SUBADDR);
+
+		if (xfers[i].flags & I2C_M_TEN)
+			ccmd->cmd0 |= CMD0_FIFO_IS_10B;
+
+		if (xfers[i].flags & I2C_M_RD) {
+			ccmd->cmd0 |= CMD0_FIFO_RNW;
+			ccmd->rx_buf = xfers[i].buf;
+			ccmd->rx_len = xfers[i].len;
+		} else {
+			ccmd->tx_buf = xfers[i].buf;
+			ccmd->tx_len = xfers[i].len;
+		}
+	}
+
+	cdns_i3c_master_queue_xfer(master, xfer);
+	if (!wait_for_completion_timeout(&xfer->comp, msecs_to_jiffies(1000)))
+		cdns_i3c_master_unqueue_xfer(master, xfer);
+
+	ret = xfer->ret;
+	cdns_i3c_master_free_xfer(xfer);
+
+	return ret;
+}
+
+static u32 cdns_i3c_master_i2c_funcs(struct i3c_master_controller *m)
+{
+	return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR;
+}
+
+struct cdns_i3c_i2c_dev_data {
+	u16 id;
+	s16 ibi;
+	struct i3c_generic_ibi_pool *ibi_pool;
+};
+
+static u32 prepare_rr0_dev_address(u32 addr)
+{
+	u32 ret = (addr << 1) & 0xff;
+
+	/* RR0[7:1] = addr[6:0] */
+	ret |= (addr & GENMASK(6, 0)) << 1;
+
+	/* RR0[15:13] = addr[9:7] */
+	ret |= (addr & GENMASK(9, 7)) << 6;
+
+	/* RR0[0] = ~XOR(addr[6:0]) */
+	if (!(hweight8(addr & 0x7f) & 1))
+		ret |= 1;
+
+	return ret;
+}
+
+static void cdns_i3c_master_upd_i3c_addr(struct i3c_device *dev)
+{
+	struct i3c_master_controller *m = i3c_device_get_master(dev);
+	struct cdns_i3c_master *master = to_cdns_i3c_master(m);
+	struct cdns_i3c_i2c_dev_data *data = i3c_device_get_master_data(dev);
+	u32 rr;
+
+	rr = prepare_rr0_dev_address(dev->info.dyn_addr ?
+				     dev->info.dyn_addr :
+				     dev->info.static_addr);
+	writel(DEV_ID_RR0_IS_I3C | rr, master->regs + DEV_ID_RR0(data->id));
+}
+
+static int cdns_i3c_master_get_rr_slot(struct cdns_i3c_master *master,
+				       u8 dyn_addr)
+{
+	u32 activedevs, rr;
+	int i;
+
+	if (!dyn_addr) {
+		if (!master->free_rr_slots)
+			return -ENOSPC;
+
+		return ffs(master->free_rr_slots) - 1;
+	}
+
+	activedevs = readl(master->regs + DEVS_CTRL) &
+		     DEVS_CTRL_DEVS_ACTIVE_MASK;
+
+	for (i = 1; i <= master->maxdevs; i++) {
+		if (!(BIT(i) & activedevs))
+			continue;
+
+		rr = readl(master->regs + DEV_ID_RR0(i));
+		if (!(rr & DEV_ID_RR0_IS_I3C) ||
+		    DEV_ID_RR0_GET_DEV_ADDR(rr) != dyn_addr)
+			continue;
+
+		return i;
+	}
+
+	return -EINVAL;
+}
+
+static void cdns_i3c_master_reattach_i3c_dev(struct i3c_device *dev,
+					     u8 old_dyn_addr)
+{
+	struct i3c_master_controller *m = i3c_device_get_master(dev);
+
+	cdns_i3c_master_upd_i3c_addr(dev);
+	if (!old_dyn_addr)
+		return;
+
+	/* Now, make sure we re-enable the IBI if needed. */
+	mutex_lock(&dev->ibi_lock);
+	if (dev->ibi && dev->ibi->enabled) {
+		int ret;
+
+		ret = i3c_master_enec_locked(m, dev->info.dyn_addr,
+					     I3C_CCC_EVENT_SIR);
+		if (ret)
+			dev_err(&dev->dev, "Could not re-enable IBIs");
+	}
+	mutex_unlock(&dev->ibi_lock);
+}
+
+static int cdns_i3c_master_attach_i3c_dev(struct i3c_device *dev)
+{
+	struct i3c_master_controller *m = i3c_device_get_master(dev);
+	struct cdns_i3c_master *master = to_cdns_i3c_master(m);
+	struct cdns_i3c_i2c_dev_data *data;
+	unsigned long max_fscl;
+	int slot;
+
+	slot = cdns_i3c_master_get_rr_slot(master, dev->info.dyn_addr);
+	if (slot < 0)
+		return slot;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->ibi = -1;
+	data->id = slot;
+	i3c_device_set_master_data(dev, data);
+	master->free_rr_slots &= ~BIT(slot);
+
+	if (!dev->info.dyn_addr) {
+		cdns_i3c_master_upd_i3c_addr(dev);
+		writel(readl(master->regs + DEVS_CTRL) |
+		       DEVS_CTRL_DEV_ACTIVE(data->id),
+		       master->regs + DEVS_CTRL);
+		return 0;
+	}
+
+	max_fscl = max(I3C_CCC_MAX_SDR_FSCL(dev->info.max_read_ds),
+		       I3C_CCC_MAX_SDR_FSCL(dev->info.max_write_ds));
+	switch (max_fscl) {
+	case I3C_SDR1_FSCL_8MHZ:
+		max_fscl = 8000000;
+		break;
+	case I3C_SDR2_FSCL_6MHZ:
+		max_fscl = 6000000;
+		break;
+	case I3C_SDR3_FSCL_4MHZ:
+		max_fscl = 4000000;
+		break;
+	case I3C_SDR4_FSCL_2MHZ:
+		max_fscl = 2000000;
+		break;
+	case I3C_SDR0_FSCL_MAX:
+	default:
+		max_fscl = 0;
+		break;
+	}
+
+	/* Update SCL limitation in I3C SDR mode. */
+	if (max_fscl &&
+	    (master->i3c_scl_lim > max_fscl || !master->i3c_scl_lim))
+		master->i3c_scl_lim = max_fscl;
+
+	return 0;
+}
+
+static void cdns_i3c_master_detach_i3c_dev(struct i3c_device *dev)
+{
+	struct i3c_master_controller *m = i3c_device_get_master(dev);
+	struct cdns_i3c_master *master = to_cdns_i3c_master(m);
+	struct cdns_i3c_i2c_dev_data *data = i3c_device_get_master_data(dev);
+
+	writel(readl(master->regs + DEVS_CTRL) |
+	       DEVS_CTRL_DEV_CLR(data->id),
+	       master->regs + DEVS_CTRL);
+
+	i3c_device_set_master_data(dev, NULL);
+	master->free_rr_slots |= BIT(data->id);
+	kfree(data);
+}
+
+static int cdns_i3c_master_attach_i2c_dev(struct i2c_device *dev)
+{
+	struct i3c_master_controller *m = i2c_device_get_master(dev);
+	struct cdns_i3c_master *master = to_cdns_i3c_master(m);
+	struct cdns_i3c_i2c_dev_data *data;
+	int slot;
+
+	slot = cdns_i3c_master_get_rr_slot(master, 0);
+	if (slot < 0)
+		return slot;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->id = slot;
+	master->free_rr_slots &= ~BIT(slot);
+	i2c_device_set_master_data(dev, data);
+
+	writel(prepare_rr0_dev_address(dev->info.addr) |
+	       (dev->info.flags & I2C_CLIENT_TEN ? DEV_ID_RR0_LVR_EXT_ADDR : 0),
+	       master->regs + DEV_ID_RR0(data->id));
+	writel(dev->lvr, master->regs + DEV_ID_RR2(data->id));
+	writel(readl(master->regs + DEVS_CTRL) |
+	       DEVS_CTRL_DEV_ACTIVE(data->id),
+	       master->regs + DEVS_CTRL);
+
+	return 0;
+}
+
+static void cdns_i3c_master_detach_i2c_dev(struct i2c_device *dev)
+{
+	struct i3c_master_controller *m = i2c_device_get_master(dev);
+	struct cdns_i3c_master *master = to_cdns_i3c_master(m);
+	struct cdns_i3c_i2c_dev_data *data = i2c_device_get_master_data(dev);
+
+	writel(readl(master->regs + DEVS_CTRL) |
+	       DEVS_CTRL_DEV_CLR(data->id),
+	       master->regs + DEVS_CTRL);
+	master->free_rr_slots |= BIT(data->id);
+
+	i2c_device_set_master_data(dev, NULL);
+	kfree(data);
+}
+
+static void cdns_i3c_master_bus_cleanup(struct i3c_master_controller *m)
+{
+	struct cdns_i3c_master *master = to_cdns_i3c_master(m);
+
+	cdns_i3c_master_disable(master);
+}
+
+static void cdns_i3c_master_dev_rr_to_info(struct cdns_i3c_master *master,
+					   unsigned int slot,
+					   struct i3c_device_info *info)
+{
+	u32 rr;
+
+	memset(info, 0, sizeof(*info));
+	rr = readl(master->regs + DEV_ID_RR0(slot));
+	info->dyn_addr = DEV_ID_RR0_GET_DEV_ADDR(rr);
+	rr = readl(master->regs + DEV_ID_RR2(slot));
+	info->dcr = rr;
+	info->bcr = rr >> 8;
+	info->pid = rr >> 16;
+	info->pid |= (u64)readl(master->regs + DEV_ID_RR1(slot)) << 16;
+}
+
+static void cdns_i3c_master_upd_i3c_scl_lim(struct cdns_i3c_master *master)
+{
+	unsigned long i3c_lim_period, pres_step, ncycles;
+	u32 prescl1, ctrl;
+
+	pres_step = 1000000000UL / (master->base.bus->scl_rate.i3c * 4);
+
+	/* Configure PP_LOW to meet I3C slave limitations. */
+	prescl1 = readl(master->regs + PRESCL_CTRL1) &
+		  ~PRESCL_CTRL1_PP_LOW_MASK;
+	ctrl = readl(master->regs + CTRL);
+
+	i3c_lim_period = DIV_ROUND_UP(1000000000, master->i3c_scl_lim);
+	ncycles = DIV_ROUND_UP(i3c_lim_period, pres_step);
+	if (ncycles < 4)
+		ncycles = 0;
+	else
+		ncycles -= 4;
+
+	prescl1 |= PRESCL_CTRL1_PP_LOW(ncycles);
+
+	/* Disable I3C master before updating PRESCL_CTRL1. */
+	if (ctrl & CTRL_DEV_EN)
+		cdns_i3c_master_disable(master);
+
+	writel(prescl1, master->regs + PRESCL_CTRL1);
+
+	if (ctrl & CTRL_DEV_EN)
+		cdns_i3c_master_enable(master);
+}
+
+static int cdns_i3c_master_do_daa(struct i3c_master_controller *m)
+{
+	struct cdns_i3c_master *master = to_cdns_i3c_master(m);
+	unsigned long old_i3c_scl_lim;
+	u32 olddevs, newdevs;
+	int ret, slot;
+	u8 addrs[MAX_DEVS] = { };
+	u8 last_addr = 0;
+
+	olddevs = readl(master->regs + DEVS_CTRL) & DEVS_CTRL_DEVS_ACTIVE_MASK;
+
+	/* Prepare RR slots before launching DAA. */
+	for (slot = 1; slot <= master->maxdevs; slot++) {
+		if (olddevs & BIT(slot))
+			continue;
+
+		ret = i3c_master_get_free_addr(m, last_addr + 1);
+		if (ret < 0)
+			return -ENOSPC;
+
+		last_addr = ret;
+		addrs[slot] = last_addr;
+		writel(prepare_rr0_dev_address(last_addr) | DEV_ID_RR0_IS_I3C,
+		       master->regs + DEV_ID_RR0(slot));
+		writel(0, master->regs + DEV_ID_RR1(slot));
+		writel(0, master->regs + DEV_ID_RR2(slot));
+	}
+
+	ret = i3c_master_entdaa_locked(&master->base);
+	if (ret)
+		return ret;
+
+	newdevs = readl(master->regs + DEVS_CTRL) & DEVS_CTRL_DEVS_ACTIVE_MASK;
+	newdevs &= ~olddevs;
+
+	/* Save the old limitation before add devices. */
+	old_i3c_scl_lim = master->i3c_scl_lim;
+
+	/*
+	 * Clear all retaining registers filled during DAA. We already
+	 * have the addressed assigned to them in the addrs array.
+	 */
+	for (slot = 1; slot <= master->maxdevs; slot++) {
+		if (newdevs & BIT(slot))
+			i3c_master_add_i3c_dev_locked(m, addrs[slot]);
+	}
+
+	/*
+	 * Clear slots that ended up not being used. Can be caused by I3C
+	 * device creation failure or when the I3C device was already known
+	 * by the system but with a different address (in this case the device
+	 * already has a slot and does not need a new one).
+	 */
+	writel(readl(master->regs + DEVS_CTRL) |
+	       master->free_rr_slots << DEVS_CTRL_DEV_CLR_SHIFT,
+	       master->regs + DEVS_CTRL);
+
+	i3c_master_defslvs_locked(&master->base);
+
+	/* Only update PRESCL_CTRL1 if the I3C SCL limitation has changed. */
+	if (old_i3c_scl_lim != master->i3c_scl_lim)
+		cdns_i3c_master_upd_i3c_scl_lim(master);
+
+	/* Unmask Hot-Join and Mastership request interrupts. */
+	i3c_master_enec_locked(m, I3C_BROADCAST_ADDR,
+			       I3C_CCC_EVENT_HJ | I3C_CCC_EVENT_MR);
+
+	return 0;
+}
+
+static int cdns_i3c_master_bus_init(struct i3c_master_controller *m)
+{
+	struct cdns_i3c_master *master = to_cdns_i3c_master(m);
+	unsigned long pres_step, sysclk_rate, max_i2cfreq;
+	u32 ctrl, prescl0, prescl1, pres, low;
+	struct i3c_device_info info = { };
+	int ret, ncycles;
+
+	switch (m->bus->mode) {
+	case I3C_BUS_MODE_PURE:
+		ctrl = CTRL_PURE_BUS_MODE;
+		break;
+
+	case I3C_BUS_MODE_MIXED_FAST:
+		ctrl = CTRL_MIXED_FAST_BUS_MODE;
+		break;
+
+	case I3C_BUS_MODE_MIXED_SLOW:
+		ctrl = CTRL_MIXED_SLOW_BUS_MODE;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	sysclk_rate = clk_get_rate(master->sysclk);
+	if (!sysclk_rate)
+		return -EINVAL;
+
+	pres = DIV_ROUND_UP(sysclk_rate, (m->bus->scl_rate.i3c * 4)) - 1;
+	if (pres > PRESCL_CTRL0_MAX)
+		return -ERANGE;
+
+	m->bus->scl_rate.i3c = sysclk_rate / ((pres + 1) * 4);
+
+	prescl0 = PRESCL_CTRL0_I3C(pres);
+
+	low = ((I3C_BUS_TLOW_OD_MIN_NS * sysclk_rate) / (pres + 1)) - 2;
+	prescl1 = PRESCL_CTRL1_OD_LOW(low);
+
+	max_i2cfreq = m->bus->scl_rate.i2c;
+
+	pres = (sysclk_rate / (max_i2cfreq * 5)) - 1;
+	if (pres > PRESCL_CTRL0_MAX)
+		return -ERANGE;
+
+	m->bus->scl_rate.i2c = sysclk_rate / ((pres + 1) * 5);
+
+	prescl0 |= PRESCL_CTRL0_I2C(pres);
+	writel(prescl0, master->regs + PRESCL_CTRL0);
+
+	/* Calculate OD and PP low. */
+	pres_step = 1000000000 / (m->bus->scl_rate.i3c * 4);
+	ncycles = DIV_ROUND_UP(I3C_BUS_TLOW_OD_MIN_NS, pres_step) - 2;
+	if (ncycles < 0)
+		ncycles = 0;
+	prescl1 = PRESCL_CTRL1_OD_LOW(ncycles);
+	writel(prescl1, master->regs + PRESCL_CTRL1);
+
+	/* Get an address for the master. */
+	ret = i3c_master_get_free_addr(m, 0);
+	if (ret < 0)
+		return ret;
+
+	writel(prepare_rr0_dev_address(ret) | DEV_ID_RR0_IS_I3C,
+	       master->regs + DEV_ID_RR0(0));
+
+	cdns_i3c_master_dev_rr_to_info(master, 0, &info);
+	if (info.bcr & I3C_BCR_HDR_CAP)
+		info.hdr_cap = I3C_CCC_HDR_MODE(I3C_HDR_DDR);
+
+	ret = i3c_master_set_info(&master->base, &info);
+	if (ret)
+		return ret;
+
+	/*
+	 * Enable Hot-Join, and, when a Hot-Join request happens, disable all
+	 * events coming from this device.
+	 *
+	 * We will issue ENTDAA afterwards from the threaded IRQ handler.
+	 */
+	ctrl |= CTRL_HJ_ACK | CTRL_HJ_DISEC | CTRL_HALT_EN | CTRL_MCS_EN;
+	writel(ctrl, master->regs + CTRL);
+
+	cdns_i3c_master_enable(master);
+
+	return 0;
+}
+
+static void cdns_i3c_master_handle_ibi(struct cdns_i3c_master *master,
+				       u32 ibir)
+{
+	struct cdns_i3c_i2c_dev_data *data;
+	bool data_consumed = false;
+	struct i3c_ibi_slot *slot;
+	u32 id = IBIR_SLVID(ibir);
+	struct i3c_device *dev;
+	int len, i, j;
+	u8 *buf;
+
+	/*
+	 * FIXME: maybe we should report the FIFO OVF errors to the upper
+	 * layer.
+	 */
+	if (id >= master->ibi.num_slots || (ibir & IBIR_ERROR))
+		goto out;
+
+	dev = master->ibi.slots[id];
+	spin_lock(&master->ibi.lock);
+
+	data = i3c_device_get_master_data(dev);
+	slot = i3c_generic_ibi_get_free_slot(data->ibi_pool);
+	if (!slot)
+		goto out_unlock;
+
+	buf = slot->data;
+
+	len = IBIR_XFER_BYTES(ibir);
+	for (i = 0; i < IBIR_XFER_BYTES(ibir); i += 4) {
+		u32 tmp = readl(master->regs + IBI_DATA_FIFO);
+
+		for (j = 0; j < 4 && i + j < dev->ibi->max_payload_len; j++)
+			buf[i + j] = tmp >> (j * 8);
+
+	}
+	slot->len = min_t(unsigned int, IBIR_XFER_BYTES(ibir),
+			  dev->ibi->max_payload_len);
+	i3c_master_queue_ibi(dev, slot);
+	data_consumed = true;
+
+out_unlock:
+	spin_unlock(&master->ibi.lock);
+
+out:
+	/* Consume data from the FIFO if it's not been done already. */
+	if (!data_consumed) {
+		for (i = 0; i < IBIR_XFER_BYTES(ibir); i += 4)
+			readl(master->regs + IBI_DATA_FIFO);
+	}
+}
+
+static void cnds_i3c_master_demux_ibis(struct cdns_i3c_master *master)
+{
+	u32 status0;
+
+	writel(MST_INT_IBIR_THR, master->regs + MST_ICR);
+
+	for (status0 = readl(master->regs + MST_STATUS0);
+	     !(status0 & MST_STATUS0_IBIR_EMP);
+	     status0 = readl(master->regs + MST_STATUS0)) {
+		u32 ibir = readl(master->regs + IBIR);
+
+		switch (IBIR_TYPE(ibir)) {
+		case IBIR_TYPE_IBI:
+			cdns_i3c_master_handle_ibi(master, ibir);
+			break;
+
+		case IBIR_TYPE_HJ:
+			WARN_ON(IBIR_XFER_BYTES(ibir) || (ibir & IBIR_ERROR));
+			queue_work(master->base.wq, &master->hj_work);
+			break;
+
+		case IBIR_TYPE_MR:
+			WARN_ON(IBIR_XFER_BYTES(ibir) || (ibir & IBIR_ERROR));
+		default:
+			break;
+		}
+	}
+}
+
+static irqreturn_t cdns_i3c_master_interrupt(int irq, void *data)
+{
+	struct cdns_i3c_master *master = data;
+	u32 status;
+
+	status = readl(master->regs + MST_ISR);
+	if (!(status & readl(master->regs + MST_IMR)))
+		return IRQ_NONE;
+
+	spin_lock(&master->xferqueue.lock);
+	cdns_i3c_master_end_xfer_locked(master, status);
+	spin_unlock(&master->xferqueue.lock);
+
+	if (status & MST_INT_IBIR_THR)
+		cnds_i3c_master_demux_ibis(master);
+
+	return IRQ_HANDLED;
+}
+
+static int cdns_i3c_master_disable_ibi(struct i3c_device *dev)
+{
+	struct i3c_master_controller *m = i3c_device_get_master(dev);
+	struct cdns_i3c_master *master = to_cdns_i3c_master(m);
+	struct cdns_i3c_i2c_dev_data *data = i3c_device_get_master_data(dev);
+	unsigned long flags;
+	u32 sirmap;
+	int ret;
+
+	ret = i3c_master_disec_locked(m, dev->info.dyn_addr,
+				      I3C_CCC_EVENT_SIR);
+	if (ret)
+		return ret;
+
+	spin_lock_irqsave(&master->ibi.lock, flags);
+	sirmap = readl(master->regs + SIR_MAP_DEV_REG(data->ibi));
+	sirmap &= ~SIR_MAP_DEV_CONF_MASK(data->ibi);
+	sirmap |= SIR_MAP_DEV_CONF(data->ibi,
+				   SIR_MAP_DEV_DA(I3C_BROADCAST_ADDR));
+	writel(sirmap, master->regs + SIR_MAP_DEV_REG(data->ibi));
+	spin_unlock_irqrestore(&master->ibi.lock, flags);
+
+	return ret;
+}
+
+static int cdns_i3c_master_enable_ibi(struct i3c_device *dev)
+{
+	struct i3c_master_controller *m = i3c_device_get_master(dev);
+	struct cdns_i3c_master *master = to_cdns_i3c_master(m);
+	struct cdns_i3c_i2c_dev_data *data = i3c_device_get_master_data(dev);
+	unsigned long flags;
+	u32 sircfg, sirmap;
+	int ret;
+
+	spin_lock_irqsave(&master->ibi.lock, flags);
+	sirmap = readl(master->regs + SIR_MAP_DEV_REG(data->ibi));
+	sirmap &= ~SIR_MAP_DEV_CONF_MASK(data->ibi);
+	sircfg = SIR_MAP_DEV_ROLE(dev->info.bcr >> 6) |
+		 SIR_MAP_DEV_DA(dev->info.dyn_addr) |
+		 SIR_MAP_DEV_PL(dev->info.max_ibi_len) |
+		 SIR_MAP_DEV_ACK;
+
+	if (dev->info.bcr & I3C_BCR_MAX_DATA_SPEED_LIM)
+		sircfg |= SIR_MAP_DEV_SLOW;
+
+	sirmap |= SIR_MAP_DEV_CONF(data->ibi, sircfg);
+	writel(sirmap, master->regs + SIR_MAP_DEV_REG(data->ibi));
+	spin_unlock_irqrestore(&master->ibi.lock, flags);
+
+	ret = i3c_master_enec_locked(m, dev->info.dyn_addr,
+				     I3C_CCC_EVENT_SIR);
+	if (ret) {
+		spin_lock_irqsave(&master->ibi.lock, flags);
+		sirmap = readl(master->regs + SIR_MAP_DEV_REG(data->ibi));
+		sirmap &= ~SIR_MAP_DEV_CONF_MASK(data->ibi);
+		sirmap |= SIR_MAP_DEV_CONF(data->ibi,
+					   SIR_MAP_DEV_DA(I3C_BROADCAST_ADDR));
+		writel(sirmap, master->regs + SIR_MAP_DEV_REG(data->ibi));
+		spin_unlock_irqrestore(&master->ibi.lock, flags);
+	}
+
+	return ret;
+}
+
+static int cdns_i3c_master_request_ibi(struct i3c_device *dev,
+				       const struct i3c_ibi_setup *req)
+{
+	struct i3c_master_controller *m = i3c_device_get_master(dev);
+	struct cdns_i3c_master *master = to_cdns_i3c_master(m);
+	struct cdns_i3c_i2c_dev_data *data = i3c_device_get_master_data(dev);
+	unsigned long flags;
+	unsigned int i;
+
+	data->ibi_pool = i3c_generic_ibi_alloc_pool(dev, req);
+	if (IS_ERR(data->ibi_pool))
+		return PTR_ERR(data->ibi_pool);
+
+	spin_lock_irqsave(&master->ibi.lock, flags);
+	for (i = 0; i < master->ibi.num_slots; i++) {
+		if (!master->ibi.slots[i]) {
+			data->ibi = i;
+			master->ibi.slots[i] = dev;
+			break;
+		}
+	}
+	spin_unlock_irqrestore(&master->ibi.lock, flags);
+
+	if (i < master->ibi.num_slots)
+		return 0;
+
+	i3c_generic_ibi_free_pool(data->ibi_pool);
+	data->ibi_pool = NULL;
+
+	return -ENOSPC;
+}
+
+static void cdns_i3c_master_free_ibi(struct i3c_device *dev)
+{
+	struct i3c_master_controller *m = i3c_device_get_master(dev);
+	struct cdns_i3c_master *master = to_cdns_i3c_master(m);
+	struct cdns_i3c_i2c_dev_data *data = i3c_device_get_master_data(dev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&master->ibi.lock, flags);
+	master->ibi.slots[data->ibi] = NULL;
+	data->ibi = -1;
+	spin_unlock_irqrestore(&master->ibi.lock, flags);
+
+	i3c_generic_ibi_free_pool(data->ibi_pool);
+}
+
+static void cdns_i3c_master_recycle_ibi_slot(struct i3c_device *dev,
+					     struct i3c_ibi_slot *slot)
+{
+	struct cdns_i3c_i2c_dev_data *data = i3c_device_get_master_data(dev);
+
+	i3c_generic_ibi_recycle_slot(data->ibi_pool, slot);
+}
+
+static const struct i3c_master_controller_ops cdns_i3c_master_ops = {
+	.bus_init = cdns_i3c_master_bus_init,
+	.bus_cleanup = cdns_i3c_master_bus_cleanup,
+	.do_daa = cdns_i3c_master_do_daa,
+	.attach_i3c_dev = cdns_i3c_master_attach_i3c_dev,
+	.reattach_i3c_dev = cdns_i3c_master_reattach_i3c_dev,
+	.detach_i3c_dev = cdns_i3c_master_detach_i3c_dev,
+	.attach_i2c_dev = cdns_i3c_master_attach_i2c_dev,
+	.detach_i2c_dev = cdns_i3c_master_detach_i2c_dev,
+	.supports_ccc_cmd = cdns_i3c_master_supports_ccc_cmd,
+	.send_ccc_cmd = cdns_i3c_master_send_ccc_cmd,
+	.priv_xfers = cdns_i3c_master_priv_xfers,
+	.i2c_xfers = cdns_i3c_master_i2c_xfers,
+	.i2c_funcs = cdns_i3c_master_i2c_funcs,
+	.enable_ibi = cdns_i3c_master_enable_ibi,
+	.disable_ibi = cdns_i3c_master_disable_ibi,
+	.request_ibi = cdns_i3c_master_request_ibi,
+	.free_ibi = cdns_i3c_master_free_ibi,
+	.recycle_ibi_slot = cdns_i3c_master_recycle_ibi_slot,
+};
+
+static void cdns_i3c_master_hj(struct work_struct *work)
+{
+	struct cdns_i3c_master *master = container_of(work,
+						      struct cdns_i3c_master,
+						      hj_work);
+
+	i3c_master_do_daa(&master->base);
+}
+
+static int cdns_i3c_master_probe(struct platform_device *pdev)
+{
+	struct cdns_i3c_master *master;
+	struct resource *res;
+	int ret, irq;
+	u32 val;
+
+	master = devm_kzalloc(&pdev->dev, sizeof(*master), GFP_KERNEL);
+	if (!master)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	master->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(master->regs))
+		return PTR_ERR(master->regs);
+
+	master->pclk = devm_clk_get(&pdev->dev, "pclk");
+	if (IS_ERR(master->pclk))
+		return PTR_ERR(master->pclk);
+
+	master->sysclk = devm_clk_get(&pdev->dev, "sysclk");
+	if (IS_ERR(master->pclk))
+		return PTR_ERR(master->pclk);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	ret = clk_prepare_enable(master->pclk);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(master->sysclk);
+	if (ret)
+		goto err_disable_pclk;
+
+	if (readl(master->regs + DEV_ID) != DEV_ID_I3C_MASTER) {
+		ret = -EINVAL;
+		goto err_disable_sysclk;
+	}
+
+	spin_lock_init(&master->xferqueue.lock);
+	INIT_LIST_HEAD(&master->xferqueue.list);
+
+	INIT_WORK(&master->hj_work, cdns_i3c_master_hj);
+	writel(0xffffffff, master->regs + MST_IDR);
+	writel(0xffffffff, master->regs + SLV_IDR);
+	ret = devm_request_irq(&pdev->dev, irq, cdns_i3c_master_interrupt, 0,
+			       dev_name(&pdev->dev), master);
+	if (ret)
+		goto err_disable_sysclk;
+
+	platform_set_drvdata(pdev, master);
+
+	val = readl(master->regs + CONF_STATUS0);
+
+	/* Device ID0 is reserved to describe this master. */
+	master->maxdevs = CONF_STATUS0_DEVS_NUM(val);
+	master->free_rr_slots = GENMASK(master->maxdevs, 1);
+
+	val = readl(master->regs + CONF_STATUS1);
+	master->caps.cmdfifodepth = CONF_STATUS1_CMD_DEPTH(val);
+	master->caps.rxfifodepth = CONF_STATUS1_RX_DEPTH(val);
+	master->caps.txfifodepth = CONF_STATUS1_TX_DEPTH(val);
+	master->caps.ibirfifodepth = 16;
+	master->caps.cmdrfifodepth = 16;
+
+	spin_lock_init(&master->ibi.lock);
+	master->ibi.num_slots = CONF_STATUS1_IBI_HW_RES(val);
+	master->ibi.slots = devm_kzalloc(&pdev->dev,
+					 sizeof(*master->ibi.slots) *
+					 master->ibi.num_slots,
+					 GFP_KERNEL);
+	if (!master->ibi.slots)
+		goto err_disable_sysclk;
+
+	writel(IBIR_THR(1), master->regs + CMD_IBI_THR_CTRL);
+	writel(MST_INT_IBIR_THR, master->regs + MST_IER);
+	writel(DEVS_CTRL_DEV_CLR_ALL, master->regs + DEVS_CTRL);
+
+	ret = i3c_master_register(&master->base, &pdev->dev,
+				  &cdns_i3c_master_ops, false);
+	if (ret)
+		goto err_disable_sysclk;
+
+	return 0;
+
+err_disable_sysclk:
+	clk_disable_unprepare(master->sysclk);
+
+err_disable_pclk:
+	clk_disable_unprepare(master->pclk);
+
+	return ret;
+}
+
+static int cdns_i3c_master_remove(struct platform_device *pdev)
+{
+	struct cdns_i3c_master *master = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = i3c_master_unregister(&master->base);
+	if (ret)
+		return ret;
+
+	clk_disable_unprepare(master->sysclk);
+	clk_disable_unprepare(master->pclk);
+
+	return 0;
+}
+
+static const struct of_device_id cdns_i3c_master_of_ids[] = {
+	{ .compatible = "cdns,i3c-master" },
+	{ /* sentinel */ },
+};
+
+static struct platform_driver cdns_i3c_master = {
+	.probe = cdns_i3c_master_probe,
+	.remove = cdns_i3c_master_remove,
+	.driver = {
+		.name = "cdns-i3c-master",
+		.of_match_table = cdns_i3c_master_of_ids,
+	},
+};
+module_platform_driver(cdns_i3c_master);
+
+MODULE_AUTHOR("Boris Brezillon <boris.brezillon@bootlin.com>");
+MODULE_DESCRIPTION("Cadence I3C master driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:cdns-i3c-master");
-- 
2.14.1

^ permalink raw reply related	[flat|nested] 51+ messages in thread

* [PATCH v4 08/10] dt-bindings: i3c: Document Cadence I3C master bindings
  2018-03-30  7:47 [PATCH v4 00/10] Add the I3C subsystem Boris Brezillon
                   ` (6 preceding siblings ...)
  2018-03-30  7:47 ` [PATCH v4 07/10] i3c: master: Add driver for Cadence IP Boris Brezillon
@ 2018-03-30  7:47 ` Boris Brezillon
  2018-04-09 20:25   ` Rob Herring
  2018-03-30  7:47 ` [PATCH v4 09/10] gpio: Add a driver for Cadence I3C GPIO expander Boris Brezillon
                   ` (2 subsequent siblings)
  10 siblings, 1 reply; 51+ messages in thread
From: Boris Brezillon @ 2018-03-30  7:47 UTC (permalink / raw)
  To: Wolfram Sang, linux-i2c, Jonathan Corbet, linux-doc,
	Greg Kroah-Hartman, Arnd Bergmann
  Cc: Przemyslaw Sroka, Arkadiusz Golec, Alan Douglas, Bartosz Folta,
	Damian Kos, Alicja Jurasik-Urbaniak, Cyprian Wronka,
	Suresh Punnoose, Rafal Ciepiela, Thomas Petazzoni,
	Nishanth Menon, Rob Herring, Pawel Moll, Mark Rutland,
	Ian Campbell, Kumar Gala, devicetree, linux-kernel, Vitor Soares,
	Geert Uytterhoeven, Linus Walleij, Xiang Lin, linux-gpio,
	Boris Brezillon

Document Cadence I3C master DT bindings.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
---
Changes in v4:
- Fix example to match the new representation
---
 .../devicetree/bindings/i3c/cdns,i3c-master.txt    | 44 ++++++++++++++++++++++
 1 file changed, 44 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt

diff --git a/Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt
new file mode 100644
index 000000000000..0e2b8b8770bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt
@@ -0,0 +1,44 @@
+Bindings for cadence I3C master block
+=====================================
+
+Required properties:
+--------------------
+- compatible: shall be "cdns,i3c-master"
+- clocks: shall reference the pclk and sysclk
+- clock-names: shall contain "pclk" and "sysclk"
+- interrupts: the interrupt line connected to this I3C master
+- reg: I3C master registers
+
+Mandatory properties defined by the generic binding (see
+Documentation/devicetree/bindings/i3c/i3c.txt for more details):
+
+- #address-cells: shall be set to 1
+- #size-cells: shall be set to 0
+
+Optional properties defined by the generic binding (see
+Documentation/devicetree/bindings/i3c/i3c.txt for more details):
+
+- i2c-scl-hz
+- i3c-scl-hz
+
+I3C device connected on the bus follow the generic description (see
+Documentation/devicetree/bindings/i3c/i3c.txt for more details).
+
+Example:
+
+	i3c-master@0d040000 {
+		compatible = "cdns,i3c-master";
+		clocks = <&coreclock>, <&i3csysclock>;
+		clock-names = "pclk", "sysclk";
+		interrupts = <3 0>;
+		reg = <0x0d040000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-scl-hz = <100000>;
+
+		nunchuk: nunchuk@52 {
+			compatible = "nintendo,nunchuk";
+			reg = <0x52 0x80000010 0>;
+		};
+	};
+
-- 
2.14.1

^ permalink raw reply related	[flat|nested] 51+ messages in thread

* [PATCH v4 09/10] gpio: Add a driver for Cadence I3C GPIO expander
  2018-03-30  7:47 [PATCH v4 00/10] Add the I3C subsystem Boris Brezillon
                   ` (7 preceding siblings ...)
  2018-03-30  7:47 ` [PATCH v4 08/10] dt-bindings: i3c: Document Cadence I3C master bindings Boris Brezillon
@ 2018-03-30  7:47 ` Boris Brezillon
  2018-04-26  8:44   ` Linus Walleij
  2018-03-30  7:47 ` [PATCH v4 10/10] dt-bindings: gpio: Add bindings for Cadence I3C gpio expander Boris Brezillon
  2018-04-23 17:38 ` [PATCH v4 00/10] Add the I3C subsystem Boris Brezillon
  10 siblings, 1 reply; 51+ messages in thread
From: Boris Brezillon @ 2018-03-30  7:47 UTC (permalink / raw)
  To: Wolfram Sang, linux-i2c, Jonathan Corbet, linux-doc,
	Greg Kroah-Hartman, Arnd Bergmann
  Cc: Przemyslaw Sroka, Arkadiusz Golec, Alan Douglas, Bartosz Folta,
	Damian Kos, Alicja Jurasik-Urbaniak, Cyprian Wronka,
	Suresh Punnoose, Rafal Ciepiela, Thomas Petazzoni,
	Nishanth Menon, Rob Herring, Pawel Moll, Mark Rutland,
	Ian Campbell, Kumar Gala, devicetree, linux-kernel, Vitor Soares,
	Geert Uytterhoeven, Linus Walleij, Xiang Lin, linux-gpio,
	Boris Brezillon

Add a driver for Cadence I3C GPIO expander.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
---
 drivers/gpio/Kconfig         |  11 ++
 drivers/gpio/Makefile        |   1 +
 drivers/gpio/gpio-cdns-i3c.c | 380 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 392 insertions(+)
 create mode 100644 drivers/gpio/gpio-cdns-i3c.c

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 8dbb2280538d..87b7083179ff 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -862,6 +862,17 @@ config GPIO_TS4900
 
 endmenu
 
+menu "I3C GPIO expanders"
+	depends on I3C
+
+config GPIO_CDNS_I3C
+	tristate "Cadence I3C GPIO expander"
+	select GPIOLIB_IRQCHIP
+	help
+	  Say yes here to enabled the driver for Cadence I3C GPIO expander.
+
+endmenu
+
 menu "MFD GPIO expanders"
 
 config GPIO_ADP5520
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index cccb0d40846c..22a7151fc565 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_GPIO_BCM_KONA)	+= gpio-bcm-kona.o
 obj-$(CONFIG_GPIO_BD9571MWV)	+= gpio-bd9571mwv.o
 obj-$(CONFIG_GPIO_BRCMSTB)	+= gpio-brcmstb.o
 obj-$(CONFIG_GPIO_BT8XX)	+= gpio-bt8xx.o
+obj-$(CONFIG_GPIO_CDNS_I3C)	+= gpio-cdns-i3c.o
 obj-$(CONFIG_GPIO_CLPS711X)	+= gpio-clps711x.o
 obj-$(CONFIG_GPIO_CS5535)	+= gpio-cs5535.o
 obj-$(CONFIG_GPIO_CRYSTAL_COVE)	+= gpio-crystalcove.o
diff --git a/drivers/gpio/gpio-cdns-i3c.c b/drivers/gpio/gpio-cdns-i3c.c
new file mode 100644
index 000000000000..58a903fabb0a
--- /dev/null
+++ b/drivers/gpio/gpio-cdns-i3c.c
@@ -0,0 +1,380 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Cadence Design Systems Inc.
+ *
+ * Author: Boris Brezillon <boris.brezillon@bootlin.com>
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/i3c/device.h>
+#include <linux/module.h>
+
+#define OVR		0x0
+#define IVR		0x1
+#define DIR_MODE	0x2
+#define IMR		0x3
+#define ISR		0x4
+#define ITR(x)		(0x5 + (x))
+
+struct cdns_i3c_gpio {
+	struct gpio_chip gpioc;
+	struct irq_chip irqc;
+	struct i3c_device *i3cdev;
+	struct mutex irq_lock;
+	u8 dir;
+	u8 ovr;
+	u8 imr;
+	u8 itr[3];
+};
+
+static struct cdns_i3c_gpio *gpioc_to_cdns_gpioc(struct gpio_chip *gpioc)
+{
+	return container_of(gpioc, struct cdns_i3c_gpio, gpioc);
+}
+
+static int cdns_i3c_gpio_read_reg(struct cdns_i3c_gpio *gpioc, u8 reg,
+				  u8 *val)
+{
+	struct i3c_priv_xfer xfers[] = {
+		{
+			.len = sizeof(reg),
+			.data.out = &reg,
+		},
+		{
+			.rnw = true,
+			.len = sizeof(*val),
+			.data.in = val,
+		},
+	};
+
+	return i3c_device_do_priv_xfers(gpioc->i3cdev, xfers,
+					ARRAY_SIZE(xfers));
+}
+
+static int cdns_i3c_gpio_write_reg(struct cdns_i3c_gpio *gpioc, u8 reg,
+				   u8 val)
+{
+	struct i3c_priv_xfer xfers[] = {
+		{
+			.len = sizeof(reg),
+			.data.out = &reg,
+		},
+		{
+			.len = sizeof(val),
+			.data.out = &val,
+		},
+	};
+
+	return i3c_device_do_priv_xfers(gpioc->i3cdev, xfers,
+					ARRAY_SIZE(xfers));
+}
+
+static int cdns_i3c_gpio_get_direction(struct gpio_chip *g, unsigned offset)
+{
+	struct cdns_i3c_gpio *gpioc = gpioc_to_cdns_gpioc(g);
+
+	return gpioc->dir & BIT(offset);
+}
+
+static void cdns_i3c_gpio_set_multiple(struct gpio_chip *g,
+				       unsigned long *mask,
+				       unsigned long *bits)
+{
+	struct cdns_i3c_gpio *gpioc = gpioc_to_cdns_gpioc(g);
+	u8 newovr;
+	int ret;
+
+	newovr = (gpioc->ovr & ~(*mask)) | (*bits & *mask);
+	if (newovr == gpioc->ovr)
+		return;
+
+	ret = cdns_i3c_gpio_write_reg(gpioc, OVR, newovr);
+	if (!ret)
+		gpioc->ovr = newovr;
+}
+
+static void cdns_i3c_gpio_set(struct gpio_chip *g, unsigned offset, int value)
+{
+	unsigned long mask = BIT(offset), bits = value ? BIT(offset) : 0;
+
+	cdns_i3c_gpio_set_multiple(g, &mask, &bits);
+}
+
+static int cdns_i3c_gpio_set_dir(struct cdns_i3c_gpio *gpioc, unsigned pin,
+				 bool in)
+{
+	u8 newdir;
+	int ret;
+
+	newdir = gpioc->dir;
+	if (in)
+		newdir |= BIT(pin);
+	else
+		newdir &= ~BIT(pin);
+
+	if (newdir == gpioc->dir)
+		return 0;
+
+	gpioc->dir = newdir;
+	ret = cdns_i3c_gpio_write_reg(gpioc, DIR_MODE, newdir);
+	if (!ret)
+		gpioc->dir = newdir;
+
+	return ret;
+}
+
+static int cdns_i3c_gpio_dir_input(struct gpio_chip *g, unsigned offset)
+{
+	struct cdns_i3c_gpio *gpioc = gpioc_to_cdns_gpioc(g);
+
+	return cdns_i3c_gpio_set_dir(gpioc, offset, true);
+}
+
+static int cdns_i3c_gpio_dir_output(struct gpio_chip *g, unsigned offset,
+				    int val)
+{
+	struct cdns_i3c_gpio *gpioc = gpioc_to_cdns_gpioc(g);
+
+	cdns_i3c_gpio_set(g, offset, val);
+
+	return cdns_i3c_gpio_set_dir(gpioc, offset, true);
+}
+
+static int cdns_i3c_gpio_get_multiple(struct gpio_chip *g,
+				      unsigned long *mask,
+				      unsigned long *bits)
+{
+	struct cdns_i3c_gpio *gpioc = gpioc_to_cdns_gpioc(g);
+	int ret;
+	u8 ivr;
+
+	ret = cdns_i3c_gpio_read_reg(gpioc, IVR, &ivr);
+	if (ret)
+		return ret;
+
+	*bits = ivr & *mask & gpioc->dir;
+	*bits |= gpioc->ovr & *mask & ~gpioc->dir;
+
+	return 0;
+}
+
+static int cdns_i3c_gpio_get(struct gpio_chip *g, unsigned offset)
+{
+	unsigned long mask = BIT(offset), bits = 0;
+	int ret;
+
+	ret = cdns_i3c_gpio_get_multiple(g, &mask, &bits);
+	if (ret)
+		return ret;
+
+	return mask & bits;
+}
+
+static void cdns_i3c_gpio_ibi_handler(struct i3c_device *i3cdev,
+				      const struct i3c_ibi_payload *payload)
+{
+	struct cdns_i3c_gpio *gpioc = i3cdev_get_drvdata(i3cdev);
+	u8 isr = 0;
+	int i;
+
+	cdns_i3c_gpio_read_reg(gpioc, ISR, &isr);
+	for (i = 0; i < 8; i++) {
+		unsigned int irq;
+
+		if (!(BIT(i) & isr & gpioc->imr))
+			continue;
+
+		irq = irq_find_mapping(gpioc->gpioc.irq.domain, i);
+		handle_nested_irq(irq);
+	}
+}
+
+static void cdns_i3c_gpio_irq_lock(struct irq_data *data)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
+	struct cdns_i3c_gpio *gpioc = gpiochip_get_data(gc);
+
+	mutex_lock(&gpioc->irq_lock);
+}
+
+static void cdns_i3c_gpio_irq_sync_unlock(struct irq_data *data)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
+	struct cdns_i3c_gpio *gpioc = gpiochip_get_data(gc);
+	int i;
+
+	cdns_i3c_gpio_write_reg(gpioc, IMR, gpioc->imr);
+	for (i = 0; i < 3; i++)
+		cdns_i3c_gpio_write_reg(gpioc, ITR(i), gpioc->itr[i]);
+
+	mutex_unlock(&gpioc->irq_lock);
+}
+
+static void cdns_i3c_gpio_irq_unmask(struct irq_data *data)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
+	struct cdns_i3c_gpio *gpioc = gpiochip_get_data(gc);
+
+	gpioc->imr |= BIT(data->hwirq);
+}
+
+static void cdns_i3c_gpio_irq_mask(struct irq_data *data)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
+	struct cdns_i3c_gpio *gpioc = gpiochip_get_data(gc);
+
+	gpioc->imr &= ~BIT(data->hwirq);
+}
+
+static int cdns_i3c_gpio_irq_set_type(struct irq_data *data, unsigned type)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
+	struct cdns_i3c_gpio *gpioc = gpiochip_get_data(gc);
+
+	switch (type) {
+	case IRQ_TYPE_LEVEL_HIGH:
+		gpioc->itr[0] |= BIT(data->hwirq);
+		gpioc->itr[1] |= BIT(data->hwirq);
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		gpioc->itr[0] |= BIT(data->hwirq);
+		gpioc->itr[1] &= ~BIT(data->hwirq);
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		gpioc->itr[0] &= ~BIT(data->hwirq);
+		gpioc->itr[2] |= BIT(data->hwirq);
+		break;
+
+	case IRQ_TYPE_EDGE_RISING:
+		gpioc->itr[0] &= ~BIT(data->hwirq);
+		gpioc->itr[1] |= BIT(data->hwirq);
+		gpioc->itr[2] &= ~BIT(data->hwirq);
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		gpioc->itr[0] &= ~BIT(data->hwirq);
+		gpioc->itr[1] &= ~BIT(data->hwirq);
+		gpioc->itr[2] &= ~BIT(data->hwirq);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int cdns_i3c_gpio_probe(struct i3c_device *i3cdev)
+{
+	struct cdns_i3c_gpio *gpioc;
+	struct device *parent = i3cdev_to_dev(i3cdev);
+	struct i3c_ibi_setup ibisetup = {
+		.max_payload_len = 2,
+		.num_slots = 1,
+		.handler = cdns_i3c_gpio_ibi_handler,
+	};
+	int ret;
+
+	gpioc = devm_kzalloc(parent, sizeof(*gpioc), GFP_KERNEL);
+	if (!gpioc)
+		return -ENOMEM;
+
+	gpioc->i3cdev = i3cdev;
+	i3cdev_set_drvdata(i3cdev, gpioc);
+
+	/* Mask all interrupts. */
+	ret = cdns_i3c_gpio_write_reg(gpioc, IMR, 0);
+	if (ret)
+		return ret;
+
+	/*
+	 * Clear the ISR after reading it, not when the IBI is is Acked by the
+	 * I3C master. This way we make sure we don't lose events.
+	 */
+	ret = cdns_i3c_gpio_write_reg(gpioc, ITR(3), 0xff);
+	if (ret)
+		return ret;
+
+	ret = cdns_i3c_gpio_read_reg(gpioc, DIR_MODE, &gpioc->dir);
+	if (ret)
+		return ret;
+
+	ret = cdns_i3c_gpio_read_reg(gpioc, OVR, &gpioc->ovr);
+	if (ret)
+		return ret;
+
+	ret = i3c_device_request_ibi(i3cdev, &ibisetup);
+	if (ret)
+		return ret;
+
+	gpioc->gpioc.label = dev_name(parent);
+	gpioc->gpioc.owner = THIS_MODULE;
+	gpioc->gpioc.parent = parent;
+	gpioc->gpioc.base = -1;
+	gpioc->gpioc.ngpio = 8;
+	gpioc->gpioc.can_sleep = true;
+	gpioc->gpioc.get_direction = cdns_i3c_gpio_get_direction;
+	gpioc->gpioc.direction_input = cdns_i3c_gpio_dir_input;
+	gpioc->gpioc.direction_output = cdns_i3c_gpio_dir_output;
+	gpioc->gpioc.get = cdns_i3c_gpio_get;
+	gpioc->gpioc.get_multiple = cdns_i3c_gpio_get_multiple;
+	gpioc->gpioc.set = cdns_i3c_gpio_set;
+	gpioc->gpioc.set_multiple = cdns_i3c_gpio_set_multiple;
+
+	ret = devm_gpiochip_add_data(parent, &gpioc->gpioc, gpioc);
+	if (ret)
+		return ret;
+
+	gpioc->irqc.name = dev_name(parent);
+	gpioc->irqc.parent_device = parent;
+	gpioc->irqc.irq_unmask = cdns_i3c_gpio_irq_unmask;
+	gpioc->irqc.irq_mask = cdns_i3c_gpio_irq_mask;
+	gpioc->irqc.irq_bus_lock = cdns_i3c_gpio_irq_lock;
+	gpioc->irqc.irq_bus_sync_unlock = cdns_i3c_gpio_irq_sync_unlock;
+	gpioc->irqc.irq_set_type = cdns_i3c_gpio_irq_set_type;
+	gpioc->irqc.flags = IRQCHIP_SET_TYPE_MASKED | IRQCHIP_MASK_ON_SUSPEND;
+
+	ret = gpiochip_irqchip_add_nested(&gpioc->gpioc, &gpioc->irqc, 0,
+					  handle_simple_irq, IRQ_TYPE_NONE);
+	if (ret)
+		goto err_free_ibi;
+
+	ret = i3c_device_enable_ibi(i3cdev);
+	if (ret)
+		goto err_free_ibi;
+
+	return 0;
+
+err_free_ibi:
+	i3c_device_free_ibi(i3cdev);
+
+	return ret;
+}
+
+static int cdns_i3c_gpio_remove(struct i3c_device *i3cdev)
+{
+	i3c_device_disable_ibi(i3cdev);
+	i3c_device_free_ibi(i3cdev);
+
+	return 0;
+}
+
+static const struct i3c_device_id cdns_i3c_gpio_ids[] = {
+	I3C_DEVICE(0x1c9, 0x0, NULL),
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(i3c, cdns_i3c_gpio_ids);
+
+static struct i3c_driver cdns_i3c_gpio = {
+	.driver.name = "cdns-i3c-gpio",
+	.id_table = cdns_i3c_gpio_ids,
+	.probe = cdns_i3c_gpio_probe,
+	.remove = cdns_i3c_gpio_remove,
+};
+module_i3c_driver(cdns_i3c_gpio);
+
+MODULE_AUTHOR("Boris Brezillon <boris.brezillon@bootlin.com>");
+MODULE_DESCRIPTION("Driver for Cadence I3C GPIO expander");
+MODULE_LICENSE("GPL v2");
-- 
2.14.1

^ permalink raw reply related	[flat|nested] 51+ messages in thread

* [PATCH v4 10/10] dt-bindings: gpio: Add bindings for Cadence I3C gpio expander
  2018-03-30  7:47 [PATCH v4 00/10] Add the I3C subsystem Boris Brezillon
                   ` (8 preceding siblings ...)
  2018-03-30  7:47 ` [PATCH v4 09/10] gpio: Add a driver for Cadence I3C GPIO expander Boris Brezillon
@ 2018-03-30  7:47 ` Boris Brezillon
  2018-04-09 20:26   ` Rob Herring
  2018-04-23 17:38 ` [PATCH v4 00/10] Add the I3C subsystem Boris Brezillon
  10 siblings, 1 reply; 51+ messages in thread
From: Boris Brezillon @ 2018-03-30  7:47 UTC (permalink / raw)
  To: Wolfram Sang, linux-i2c, Jonathan Corbet, linux-doc,
	Greg Kroah-Hartman, Arnd Bergmann
  Cc: Przemyslaw Sroka, Arkadiusz Golec, Alan Douglas, Bartosz Folta,
	Damian Kos, Alicja Jurasik-Urbaniak, Cyprian Wronka,
	Suresh Punnoose, Rafal Ciepiela, Thomas Petazzoni,
	Nishanth Menon, Rob Herring, Pawel Moll, Mark Rutland,
	Ian Campbell, Kumar Gala, devicetree, linux-kernel, Vitor Soares,
	Geert Uytterhoeven, Linus Walleij, Xiang Lin, linux-gpio,
	Boris Brezillon

Document the Cadence I3C gpio expander bindings.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
---
Changes in v4:
- Use GPIO_ and IRQ_TYPE_ macros instead of raw numbers
- Fix the unit-address in the example
---
 .../devicetree/bindings/gpio/gpio-cdns-i3c.txt     | 39 ++++++++++++++++++++++
 1 file changed, 39 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/gpio-cdns-i3c.txt

diff --git a/Documentation/devicetree/bindings/gpio/gpio-cdns-i3c.txt b/Documentation/devicetree/bindings/gpio/gpio-cdns-i3c.txt
new file mode 100644
index 000000000000..d0155a9cea79
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-cdns-i3c.txt
@@ -0,0 +1,39 @@
+* Cadence I3C GPIO expander
+
+The Cadence I3C GPIO expander provides 8 GPIOs controllable over I3C.
+This GPIOs can be configured in output or input mode and if they are in input
+mode they can generate IBIs (In Band Interrupts).
+
+Required properties for GPIO node:
+- reg : 3 cells encoding the I3C static address (none in our case) and the I3C
+	Provisional ID. See Documentation/devicetree/bindings/i3c/i3c.txt for
+	more details.
+	Should be <0x0 0x392 0x0>.
+- gpio-controller : Marks the device node as a gpio controller.
+- #gpio-cells : Should be two. The first cell is the pin number and
+  the second cell is used to specify the gpio polarity (GPIO_ACTIVE_HIGH or
+  GPIO_ACTIVE_LOW)
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells : Should be 2. The first cell is the GPIO number.
+  The second cell is used to specify trigger type and level flags.
+  The following trigger types are accepted (see
+  <dt-bindings/interrupt-controller/irq.h> for their definition):
+	IRQ_TYPE_EDGE_RISING
+	IRQ_TYPE_EDGE_FALLING
+	IRQ_TYPE_EDGE_BOTH
+	IRQ_TYPE_LEVEL_HIGH
+	IRQ_TYPE_LEVEL_LOW
+
+Example:
+
+	i3c-master@xxx {
+		...
+		i3c_gpio_expander: gpio@0,39200000000 {
+			reg = <0 0x392 0x0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+		...
+	};
-- 
2.14.1

^ permalink raw reply related	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 04/10] dt-bindings: i3c: Document core bindings
  2018-03-30  7:47 ` [PATCH v4 04/10] dt-bindings: i3c: Document core bindings Boris Brezillon
@ 2018-03-30  7:55   ` Geert Uytterhoeven
  2018-03-30  7:59     ` Boris Brezillon
  2018-04-09 20:24   ` Rob Herring
  1 sibling, 1 reply; 51+ messages in thread
From: Geert Uytterhoeven @ 2018-03-30  7:55 UTC (permalink / raw)
  To: Boris Brezillon
  Cc: Wolfram Sang, Linux I2C, Jonathan Corbet, linux-doc,
	Greg Kroah-Hartman, Arnd Bergmann, Przemyslaw Sroka,
	Arkadiusz Golec, Alan Douglas, Bartosz Folta, Damian Kos,
	Alicja Jurasik-Urbaniak, Cyprian Wronka, Suresh Punnoose,
	Rafal Ciepiela, Thomas Petazzoni, Nishanth Menon, Rob Herring,
	Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Linux Kernel Mailing List, Vitor Soares, Linus Walleij,
	Xiang Lin, open list:GPIO SUBSYSTEM

Hi Boris,

On Fri, Mar 30, 2018 at 9:47 AM, Boris Brezillon
<boris.brezillon@bootlin.com> wrote:
> A new I3C subsystem has been added and a generic description has been
> created to represent the I3C bus and the devices connected on it.
>
> Document this generic representation.
>
> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
> ---
> Changes in v4:
> - Clarify the fact that static address == I3C address and dynamic

static address == I2C address?

>   address == I3C address

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 04/10] dt-bindings: i3c: Document core bindings
  2018-03-30  7:55   ` Geert Uytterhoeven
@ 2018-03-30  7:59     ` Boris Brezillon
  0 siblings, 0 replies; 51+ messages in thread
From: Boris Brezillon @ 2018-03-30  7:59 UTC (permalink / raw)
  To: Geert Uytterhoeven
  Cc: Wolfram Sang, Linux I2C, Jonathan Corbet, linux-doc,
	Greg Kroah-Hartman, Arnd Bergmann, Przemyslaw Sroka,
	Arkadiusz Golec, Alan Douglas, Bartosz Folta, Damian Kos,
	Alicja Jurasik-Urbaniak, Cyprian Wronka, Suresh Punnoose,
	Rafal Ciepiela, Thomas Petazzoni, Nishanth Menon, Rob Herring,
	Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Linux Kernel Mailing List, Vitor Soares, Linus Walleij,
	Xiang Lin, open list:GPIO SUBSYSTEM

On Fri, 30 Mar 2018 09:55:22 +0200
Geert Uytterhoeven <geert@linux-m68k.org> wrote:

> Hi Boris,
> 
> On Fri, Mar 30, 2018 at 9:47 AM, Boris Brezillon
> <boris.brezillon@bootlin.com> wrote:
> > A new I3C subsystem has been added and a generic description has been
> > created to represent the I3C bus and the devices connected on it.
> >
> > Document this generic representation.
> >
> > Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
> > ---
> > Changes in v4:
> > - Clarify the fact that static address == I3C address and dynamic  
> 
> static address == I2C address?

hehe, indeed.

> 
> >   address == I3C address  
> 
> Gr{oetje,eeting}s,
> 
>                         Geert
> 



-- 
Boris Brezillon, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 04/10] dt-bindings: i3c: Document core bindings
  2018-03-30  7:47 ` [PATCH v4 04/10] dt-bindings: i3c: Document core bindings Boris Brezillon
  2018-03-30  7:55   ` Geert Uytterhoeven
@ 2018-04-09 20:24   ` Rob Herring
  1 sibling, 0 replies; 51+ messages in thread
From: Rob Herring @ 2018-04-09 20:24 UTC (permalink / raw)
  To: Boris Brezillon
  Cc: Wolfram Sang, linux-i2c, Jonathan Corbet, linux-doc,
	Greg Kroah-Hartman, Arnd Bergmann, Przemyslaw Sroka,
	Arkadiusz Golec, Alan Douglas, Bartosz Folta, Damian Kos,
	Alicja Jurasik-Urbaniak, Cyprian Wronka, Suresh Punnoose,
	Rafal Ciepiela, Thomas Petazzoni, Nishanth Menon, Pawel Moll,
	Mark Rutland, Ian Campbell, Kumar Gala, devicetree, linux-kernel,
	Vitor Soares, Geert Uytterhoeven, Linus Walleij, Xiang Lin,
	linux-gpio

On Fri, Mar 30, 2018 at 09:47:45AM +0200, Boris Brezillon wrote:
> A new I3C subsystem has been added and a generic description has been
> created to represent the I3C bus and the devices connected on it.
> 
> Document this generic representation.
> 
> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
> ---
> Changes in v4:
> - Clarify the fact that static address == I3C address and dynamic
>   address == I3C address
> - Use i2c-scl-hz in the example
> 
> Changes in v3:
> - Rename {i2c,i3c}-scl-frequency DT prop into {i2c,i3c}-scl-hz
> - Rework the way we expose the provisional ID and LVR information
> - Rename dynamic-address into assigned-address
> - Enforce the I3C master node name
> 
> Changes in v2:
> - Define how to describe I3C devices in the DT and when it should be
>   used. Note that the parsing of I3C devices is not yet implemented in
>   the framework. Will be added when someone really needs it.
> ---
>  Documentation/devicetree/bindings/i3c/i3c.txt | 140 ++++++++++++++++++++++++++
>  1 file changed, 140 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/i3c/i3c.txt

Reviewed-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 08/10] dt-bindings: i3c: Document Cadence I3C master bindings
  2018-03-30  7:47 ` [PATCH v4 08/10] dt-bindings: i3c: Document Cadence I3C master bindings Boris Brezillon
@ 2018-04-09 20:25   ` Rob Herring
  0 siblings, 0 replies; 51+ messages in thread
From: Rob Herring @ 2018-04-09 20:25 UTC (permalink / raw)
  To: Boris Brezillon
  Cc: Wolfram Sang, linux-i2c, Jonathan Corbet, linux-doc,
	Greg Kroah-Hartman, Arnd Bergmann, Przemyslaw Sroka,
	Arkadiusz Golec, Alan Douglas, Bartosz Folta, Damian Kos,
	Alicja Jurasik-Urbaniak, Cyprian Wronka, Suresh Punnoose,
	Rafal Ciepiela, Thomas Petazzoni, Nishanth Menon, Pawel Moll,
	Mark Rutland, Ian Campbell, Kumar Gala, devicetree, linux-kernel,
	Vitor Soares, Geert Uytterhoeven, Linus Walleij, Xiang Lin,
	linux-gpio

On Fri, Mar 30, 2018 at 09:47:49AM +0200, Boris Brezillon wrote:
> Document Cadence I3C master DT bindings.
> 
> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
> ---
> Changes in v4:
> - Fix example to match the new representation
> ---
>  .../devicetree/bindings/i3c/cdns,i3c-master.txt    | 44 ++++++++++++++++++++++
>  1 file changed, 44 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt

Reviewed-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 10/10] dt-bindings: gpio: Add bindings for Cadence I3C gpio expander
  2018-03-30  7:47 ` [PATCH v4 10/10] dt-bindings: gpio: Add bindings for Cadence I3C gpio expander Boris Brezillon
@ 2018-04-09 20:26   ` Rob Herring
  0 siblings, 0 replies; 51+ messages in thread
From: Rob Herring @ 2018-04-09 20:26 UTC (permalink / raw)
  To: Boris Brezillon
  Cc: Wolfram Sang, linux-i2c, Jonathan Corbet, linux-doc,
	Greg Kroah-Hartman, Arnd Bergmann, Przemyslaw Sroka,
	Arkadiusz Golec, Alan Douglas, Bartosz Folta, Damian Kos,
	Alicja Jurasik-Urbaniak, Cyprian Wronka, Suresh Punnoose,
	Rafal Ciepiela, Thomas Petazzoni, Nishanth Menon, Pawel Moll,
	Mark Rutland, Ian Campbell, Kumar Gala, devicetree, linux-kernel,
	Vitor Soares, Geert Uytterhoeven, Linus Walleij, Xiang Lin,
	linux-gpio

On Fri, Mar 30, 2018 at 09:47:51AM +0200, Boris Brezillon wrote:
> Document the Cadence I3C gpio expander bindings.
> 
> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
> ---
> Changes in v4:
> - Use GPIO_ and IRQ_TYPE_ macros instead of raw numbers
> - Fix the unit-address in the example
> ---
>  .../devicetree/bindings/gpio/gpio-cdns-i3c.txt     | 39 ++++++++++++++++++++++
>  1 file changed, 39 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/gpio/gpio-cdns-i3c.txt

Reviewed-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 00/10] Add the I3C subsystem
  2018-03-30  7:47 [PATCH v4 00/10] Add the I3C subsystem Boris Brezillon
                   ` (9 preceding siblings ...)
  2018-03-30  7:47 ` [PATCH v4 10/10] dt-bindings: gpio: Add bindings for Cadence I3C gpio expander Boris Brezillon
@ 2018-04-23 17:38 ` Boris Brezillon
  2018-04-23 17:56   ` Greg Kroah-Hartman
  10 siblings, 1 reply; 51+ messages in thread
From: Boris Brezillon @ 2018-04-23 17:38 UTC (permalink / raw)
  To: Wolfram Sang, linux-i2c, Jonathan Corbet, linux-doc,
	Greg Kroah-Hartman, Arnd Bergmann
  Cc: Przemyslaw Sroka, Arkadiusz Golec, Alan Douglas, Bartosz Folta,
	Damian Kos, Alicja Jurasik-Urbaniak, Cyprian Wronka,
	Suresh Punnoose, Rafal Ciepiela, Thomas Petazzoni,
	Nishanth Menon, Rob Herring, Pawel Moll, Mark Rutland,
	Ian Campbell, Kumar Gala, devicetree, linux-kernel, Vitor Soares,
	Geert Uytterhoeven, Linus Walleij, Xiang Lin, linux-gpio

Hi,

On Fri, 30 Mar 2018 09:47:41 +0200
Boris Brezillon <boris.brezillon@bootlin.com> wrote:

> This patch series is a proposal for a new I3C subsystem.

This v4 has been sent almost a month ago and I didn't get any feedback
so far apart from Rob's R-b. Greg, is there any chance we can get these
patches merged in 4.18? If not, could you tell me what should be
addressed/improved/reworked?

Thanks,

Boris

> 
> This infrastructure is not complete yet and will be extended over
> time.
> 
> There are a few design choices that are worth mentioning because they
> impact the way I3C device drivers can interact with their devices:
> 
> - all functions used to send I3C/I2C frames must be called in
>   non-atomic context. Mainly done this way to ease implementation, but
>   this is still open to discussion. Please let me know if you think it's
>   worth considering an asynchronous model here
> - the bus element is a separate object and is not implicitly described
>   by the master (as done in I2C). The reason is that I want to be able
>   to handle multiple master connected to the same bus and visible to
>   Linux.
>   In this situation, we should only have one instance of the device and
>   not one per master, and sharing the bus object would be part of the
>   solution to gracefully handle this case.
>   I'm not sure if we will ever need to deal with multiple masters
>   controlling the same bus and exposed under Linux, but separating the
>   bus and master concept is pretty easy, hence the decision to do it
>   now, just in case we need it some day.
>   The other benefit of separating the bus and master concepts is that
>   master devices appear under the bus directory in sysfs.
> - I2C backward compatibility has been designed to be transparent to I2C
>   drivers and the I2C subsystem. The I3C master just registers an I2C
>   adapter which creates a new I2C bus. I'd say that, from a
>   representation PoV it's not ideal because what should appear as a
>   single I3C bus exposing I3C and I2C devices here appears as 2
>   different busses connected to each other through the parenting (the
>   I3C master is the parent of the I2C and I3C busses).
>   On the other hand, I don't see a better solution if we want something
>   that is not invasive.
> 
> Missing features in this preliminary version:
> - support for HDR modes (has been removed because of lack of real users)
> - no support for multi-master and the associated concepts (mastership
>   handover, support for secondary masters, ...)
> - I2C devices can only be described using DT because this is the only
>   use case I have. However, the framework can easily be extended with
>   ACPI and board info support
> - I3C slave framework. This has been completely omitted, but shouldn't
>   have a huge impact on the I3C framework because I3C slaves don't see
>   the whole bus, it's only about handling master requests and generating
>   IBIs. Some of the struct, constant and enum definitions could be
>   shared, but most of the I3C slave framework logic will be different
> 
> Main changes between v2 and v3 are:
> - Reworked the DT bindings as suggested by Rob
> - Reworked the bus initialization step as suggested by Vitor
> - Added a driver for an I3C GPIO expander
> 
> Main changes between the initial RFC and this v2 are:
> - Add a generic infrastructure to support IBIs. It's worth mentioning
>   that I tried exposing IBIs as a regular IRQs, but after several
>   attempts and a discussion with Mark Zyngier, it appeared that it was
>   not really fitting in the Linux IRQ model (the fact that you have
>   payload attached to IBIs, the fact that most of the time an IBI will
>   generate a transfer on the bus which has to be done in an atomic
>   context, ...)
>   The counterpart of this decision is the latency induced by the
>   workqueue approach, but since I don't have real use cases, I don't
>   know if this can be a problem or not. 
> - Add helpers to support Hot Join
> - Add support for IBIs and Hot Join in Cadence I3C master driver
> - Address several issues in how I was using the device model
> 
> Note that I2C changes have been sent separately [1] this time. Other
> than that, no big changes in this version, I just addressed the
> comments I received from Thomas, Peter, Geert and Rob.
> 
> Thanks,
> 
> Boris
> 
> [1]https://patchwork.ozlabs.org/project/linux-i2c/list/?series=35687
> 
> Boris Brezillon (10):
>   i3c: Add core I3C infrastructure
>   docs: driver-api: Add I3C documentation
>   i3c: Add sysfs ABI spec
>   dt-bindings: i3c: Document core bindings
>   dt-bindings: i3c: Add macros to help fill I3C/I2C device's reg
>     property
>   MAINTAINERS: Add myself as the I3C subsystem maintainer
>   i3c: master: Add driver for Cadence IP
>   dt-bindings: i3c: Document Cadence I3C master bindings
>   gpio: Add a driver for Cadence I3C GPIO expander
>   dt-bindings: gpio: Add bindings for Cadence I3C gpio expander
> 
>  Documentation/ABI/testing/sysfs-bus-i3c            |   95 ++
>  .../devicetree/bindings/gpio/gpio-cdns-i3c.txt     |   39 +
>  .../devicetree/bindings/i3c/cdns,i3c-master.txt    |   44 +
>  Documentation/devicetree/bindings/i3c/i3c.txt      |  140 ++
>  Documentation/driver-api/i3c/conf.py               |   10 +
>  Documentation/driver-api/i3c/device-driver-api.rst |    7 +
>  Documentation/driver-api/i3c/index.rst             |    9 +
>  Documentation/driver-api/i3c/master-driver-api.rst |    8 +
>  Documentation/driver-api/i3c/protocol.rst          |  201 +++
>  Documentation/driver-api/index.rst                 |    1 +
>  MAINTAINERS                                        |    9 +
>  drivers/Kconfig                                    |    2 +
>  drivers/Makefile                                   |    2 +-
>  drivers/gpio/Kconfig                               |   11 +
>  drivers/gpio/Makefile                              |    1 +
>  drivers/gpio/gpio-cdns-i3c.c                       |  380 +++++
>  drivers/i3c/Kconfig                                |   24 +
>  drivers/i3c/Makefile                               |    4 +
>  drivers/i3c/core.c                                 |  620 +++++++
>  drivers/i3c/device.c                               |  294 ++++
>  drivers/i3c/internals.h                            |   28 +
>  drivers/i3c/master.c                               | 1723 ++++++++++++++++++++
>  drivers/i3c/master/Kconfig                         |    5 +
>  drivers/i3c/master/Makefile                        |    1 +
>  drivers/i3c/master/i3c-master-cdns.c               | 1650 +++++++++++++++++++
>  include/dt-bindings/i3c/i3c.h                      |   28 +
>  include/linux/i3c/ccc.h                            |  382 +++++
>  include/linux/i3c/device.h                         |  305 ++++
>  include/linux/i3c/master.h                         |  587 +++++++
>  include/linux/mod_devicetable.h                    |   17 +
>  30 files changed, 6626 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/ABI/testing/sysfs-bus-i3c
>  create mode 100644 Documentation/devicetree/bindings/gpio/gpio-cdns-i3c.txt
>  create mode 100644 Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt
>  create mode 100644 Documentation/devicetree/bindings/i3c/i3c.txt
>  create mode 100644 Documentation/driver-api/i3c/conf.py
>  create mode 100644 Documentation/driver-api/i3c/device-driver-api.rst
>  create mode 100644 Documentation/driver-api/i3c/index.rst
>  create mode 100644 Documentation/driver-api/i3c/master-driver-api.rst
>  create mode 100644 Documentation/driver-api/i3c/protocol.rst
>  create mode 100644 drivers/gpio/gpio-cdns-i3c.c
>  create mode 100644 drivers/i3c/Kconfig
>  create mode 100644 drivers/i3c/Makefile
>  create mode 100644 drivers/i3c/core.c
>  create mode 100644 drivers/i3c/device.c
>  create mode 100644 drivers/i3c/internals.h
>  create mode 100644 drivers/i3c/master.c
>  create mode 100644 drivers/i3c/master/Kconfig
>  create mode 100644 drivers/i3c/master/Makefile
>  create mode 100644 drivers/i3c/master/i3c-master-cdns.c
>  create mode 100644 include/dt-bindings/i3c/i3c.h
>  create mode 100644 include/linux/i3c/ccc.h
>  create mode 100644 include/linux/i3c/device.h
>  create mode 100644 include/linux/i3c/master.h
> 

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 00/10] Add the I3C subsystem
  2018-04-23 17:38 ` [PATCH v4 00/10] Add the I3C subsystem Boris Brezillon
@ 2018-04-23 17:56   ` Greg Kroah-Hartman
  2018-04-29 13:36     ` Greg Kroah-Hartman
  0 siblings, 1 reply; 51+ messages in thread
From: Greg Kroah-Hartman @ 2018-04-23 17:56 UTC (permalink / raw)
  To: Boris Brezillon
  Cc: Wolfram Sang, linux-i2c, Jonathan Corbet, linux-doc,
	Arnd Bergmann, Przemyslaw Sroka, Arkadiusz Golec, Alan Douglas,
	Bartosz Folta, Damian Kos, Alicja Jurasik-Urbaniak,
	Cyprian Wronka, Suresh Punnoose, Rafal Ciepiela,
	Thomas Petazzoni, Nishanth Menon, Rob Herring, Pawel Moll,
	Mark Rutland, Ian Campbell, Kumar Gala, devicetree, linux-kernel,
	Vitor Soares, Geert Uytterhoeven, Linus Walleij, Xiang Lin,
	linux-gpio

On Mon, Apr 23, 2018 at 07:38:14PM +0200, Boris Brezillon wrote:
> Hi,
> 
> On Fri, 30 Mar 2018 09:47:41 +0200
> Boris Brezillon <boris.brezillon@bootlin.com> wrote:
> 
> > This patch series is a proposal for a new I3C subsystem.
> 
> This v4 has been sent almost a month ago and I didn't get any feedback
> so far apart from Rob's R-b. Greg, is there any chance we can get these
> patches merged in 4.18? If not, could you tell me what should be
> addressed/improved/reworked?

I'll look over it later this week, thanks.

greg k-h

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 09/10] gpio: Add a driver for Cadence I3C GPIO expander
  2018-03-30  7:47 ` [PATCH v4 09/10] gpio: Add a driver for Cadence I3C GPIO expander Boris Brezillon
@ 2018-04-26  8:44   ` Linus Walleij
  2018-06-22  8:24     ` Boris Brezillon
  0 siblings, 1 reply; 51+ messages in thread
From: Linus Walleij @ 2018-04-26  8:44 UTC (permalink / raw)
  To: Boris Brezillon
  Cc: Wolfram Sang, linux-i2c, Jonathan Corbet, linux-doc,
	Greg Kroah-Hartman, Arnd Bergmann, Przemyslaw Sroka,
	Arkadiusz Golec, Alan Douglas, Bartosz Folta, Damian Kos,
	Alicja Jurasik-Urbaniak, Cyprian Wronka, Suresh Punnoose,
	Rafal Ciepiela, Thomas Petazzoni, Nishanth Menon, Rob Herring,
	Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	linux-kernel, Vitor Soares, Geert Uytterhoeven, Xiang Lin,
	open list:GPIO SUBSYSTEM

On Fri, Mar 30, 2018 at 9:47 AM, Boris Brezillon
<boris.brezillon@bootlin.com> wrote:

> Add a driver for Cadence I3C GPIO expander.
>
> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>

This is pretty much OK, and I don't want to raise the bar
even higher for you to get this code into the kernel, so:
Acked-by: Linus Walleij <linus.walleij@linaro.org>

The following is an observation for future improvement:

> +static int cdns_i3c_gpio_read_reg(struct cdns_i3c_gpio *gpioc, u8 reg,
> +                                 u8 *val)
> +{
> +       struct i3c_priv_xfer xfers[] = {
> +               {
> +                       .len = sizeof(reg),
> +                       .data.out = &reg,
> +               },
> +               {
> +                       .rnw = true,
> +                       .len = sizeof(*val),
> +                       .data.in = val,
> +               },
> +       };
> +
> +       return i3c_device_do_priv_xfers(gpioc->i3cdev, xfers,
> +                                       ARRAY_SIZE(xfers));
> +}
> +
> +static int cdns_i3c_gpio_write_reg(struct cdns_i3c_gpio *gpioc, u8 reg,
> +                                  u8 val)
> +{
> +       struct i3c_priv_xfer xfers[] = {
> +               {
> +                       .len = sizeof(reg),
> +                       .data.out = &reg,
> +               },
> +               {
> +                       .len = sizeof(val),
> +                       .data.out = &val,
> +               },
> +       };
> +
> +       return i3c_device_do_priv_xfers(gpioc->i3cdev, xfers,
> +                                       ARRAY_SIZE(xfers));
> +}

This is starting to resemble
drivers/base/regmap/regmap-i2c.c

Maybe we should very quickly add regmap-i3c.c as this
infrastructre has had a great positive effect on may kernel
subsystems.

> +static int cdns_i3c_gpio_get_direction(struct gpio_chip *g, unsigned offset)
> +{
> +       struct cdns_i3c_gpio *gpioc = gpioc_to_cdns_gpioc(g);
> +
> +       return gpioc->dir & BIT(offset);

I would:

return !!(gpioc->dir & BIT(offset));

So you clamp it to bit 0.

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 00/10] Add the I3C subsystem
  2018-04-23 17:56   ` Greg Kroah-Hartman
@ 2018-04-29 13:36     ` Greg Kroah-Hartman
  2018-04-30  9:37       ` Boris Brezillon
  0 siblings, 1 reply; 51+ messages in thread
From: Greg Kroah-Hartman @ 2018-04-29 13:36 UTC (permalink / raw)
  To: Boris Brezillon
  Cc: Wolfram Sang, linux-i2c, Jonathan Corbet, linux-doc,
	Arnd Bergmann, Przemyslaw Sroka, Arkadiusz Golec, Alan Douglas,
	Bartosz Folta, Damian Kos, Alicja Jurasik-Urbaniak,
	Cyprian Wronka, Suresh Punnoose, Rafal Ciepiela,
	Thomas Petazzoni, Nishanth Menon, Rob Herring, Pawel Moll,
	Mark Rutland, Ian Campbell, Kumar Gala, devicetree, linux-kernel,
	Vitor Soares, Geert Uytterhoeven, Linus Walleij, Xiang Lin,
	linux-gpio

On Mon, Apr 23, 2018 at 07:56:46PM +0200, Greg Kroah-Hartman wrote:
> On Mon, Apr 23, 2018 at 07:38:14PM +0200, Boris Brezillon wrote:
> > Hi,
> > 
> > On Fri, 30 Mar 2018 09:47:41 +0200
> > Boris Brezillon <boris.brezillon@bootlin.com> wrote:
> > 
> > > This patch series is a proposal for a new I3C subsystem.
> > 
> > This v4 has been sent almost a month ago and I didn't get any feedback
> > so far apart from Rob's R-b. Greg, is there any chance we can get these
> > patches merged in 4.18? If not, could you tell me what should be
> > addressed/improved/reworked?
> 
> I'll look over it later this week, thanks.

At first glance, it would be great to have at least one other
reviewed-by or signed-off-by on the main code here.  I don't want to be
the only one to have to review it :)

thanks,

greg k-h

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 03/10] i3c: Add sysfs ABI spec
  2018-03-30  7:47 ` [PATCH v4 03/10] i3c: Add sysfs ABI spec Boris Brezillon
@ 2018-04-29 13:37   ` Greg Kroah-Hartman
  2018-04-30  9:10     ` Boris Brezillon
  2018-05-02  9:47     ` Geert Uytterhoeven
  0 siblings, 2 replies; 51+ messages in thread
From: Greg Kroah-Hartman @ 2018-04-29 13:37 UTC (permalink / raw)
  To: Boris Brezillon
  Cc: Wolfram Sang, linux-i2c, Jonathan Corbet, linux-doc,
	Arnd Bergmann, Przemyslaw Sroka, Arkadiusz Golec, Alan Douglas,
	Bartosz Folta, Damian Kos, Alicja Jurasik-Urbaniak,
	Cyprian Wronka, Suresh Punnoose, Rafal Ciepiela,
	Thomas Petazzoni, Nishanth Menon, Rob Herring, Pawel Moll,
	Mark Rutland, Ian Campbell, Kumar Gala, devicetree, linux-kernel,
	Vitor Soares, Geert Uytterhoeven, Linus Walleij, Xiang Lin,
	linux-gpio

On Fri, Mar 30, 2018 at 09:47:44AM +0200, Boris Brezillon wrote:
> Document sysfs files/directories/symlinks exposed by the I3C subsystem.
> 
> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
> ---
> Changes in v2:
> - new patch
> ---
>  Documentation/ABI/testing/sysfs-bus-i3c | 95 +++++++++++++++++++++++++++++++++
>  1 file changed, 95 insertions(+)
>  create mode 100644 Documentation/ABI/testing/sysfs-bus-i3c
> 
> diff --git a/Documentation/ABI/testing/sysfs-bus-i3c b/Documentation/ABI/testing/sysfs-bus-i3c
> new file mode 100644
> index 000000000000..5e88cc093e0e
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-bus-i3c
> @@ -0,0 +1,95 @@
> +What:		/sys/bus/i3c/devices/i3c-<bus-id>
> +KernelVersion:  4.16

Wrong kernel versions :)

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 03/10] i3c: Add sysfs ABI spec
  2018-04-29 13:37   ` Greg Kroah-Hartman
@ 2018-04-30  9:10     ` Boris Brezillon
  2018-05-02  9:47     ` Geert Uytterhoeven
  1 sibling, 0 replies; 51+ messages in thread
From: Boris Brezillon @ 2018-04-30  9:10 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: Wolfram Sang, linux-i2c, Jonathan Corbet, linux-doc,
	Arnd Bergmann, Przemyslaw Sroka, Arkadiusz Golec, Alan Douglas,
	Bartosz Folta, Damian Kos, Alicja Jurasik-Urbaniak,
	Cyprian Wronka, Suresh Punnoose, Rafal Ciepiela,
	Thomas Petazzoni, Nishanth Menon, Rob Herring, Pawel Moll,
	Mark Rutland, Ian Campbell, Kumar Gala, devicetree, linux-kernel,
	Vitor Soares, Geert Uytterhoeven, Linus Walleij, Xiang Lin,
	linux-gpio

Hi Greg,

On Sun, 29 Apr 2018 15:37:00 +0200
Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:

> On Fri, Mar 30, 2018 at 09:47:44AM +0200, Boris Brezillon wrote:
> > Document sysfs files/directories/symlinks exposed by the I3C subsystem.
> > 
> > Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
> > ---
> > Changes in v2:
> > - new patch
> > ---
> >  Documentation/ABI/testing/sysfs-bus-i3c | 95 +++++++++++++++++++++++++++++++++
> >  1 file changed, 95 insertions(+)
> >  create mode 100644 Documentation/ABI/testing/sysfs-bus-i3c
> > 
> > diff --git a/Documentation/ABI/testing/sysfs-bus-i3c b/Documentation/ABI/testing/sysfs-bus-i3c
> > new file mode 100644
> > index 000000000000..5e88cc093e0e
> > --- /dev/null
> > +++ b/Documentation/ABI/testing/sysfs-bus-i3c
> > @@ -0,0 +1,95 @@
> > +What:		/sys/bus/i3c/devices/i3c-<bus-id>
> > +KernelVersion:  4.16  
> 
> Wrong kernel versions :)

I'll fix that.

Thanks,

Boris

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 00/10] Add the I3C subsystem
  2018-04-29 13:36     ` Greg Kroah-Hartman
@ 2018-04-30  9:37       ` Boris Brezillon
  0 siblings, 0 replies; 51+ messages in thread
From: Boris Brezillon @ 2018-04-30  9:37 UTC (permalink / raw)
  To: Greg Kroah-Hartman, Wolfram Sang, Arnd Bergmann
  Cc: linux-i2c, Jonathan Corbet, linux-doc, Przemyslaw Sroka,
	Arkadiusz Golec, Alan Douglas, Bartosz Folta, Damian Kos,
	Alicja Jurasik-Urbaniak, Cyprian Wronka, Suresh Punnoose,
	Rafal Ciepiela, Thomas Petazzoni, Nishanth Menon, Rob Herring,
	Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, devicetree,
	linux-kernel, Vitor Soares, Geert Uytterhoeven, Linus Walleij,
	Xiang Lin, linux-gpio

Hi Greg,

On Sun, 29 Apr 2018 15:36:42 +0200
Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:

> On Mon, Apr 23, 2018 at 07:56:46PM +0200, Greg Kroah-Hartman wrote:
> > On Mon, Apr 23, 2018 at 07:38:14PM +0200, Boris Brezillon wrote:  
> > > Hi,
> > > 
> > > On Fri, 30 Mar 2018 09:47:41 +0200
> > > Boris Brezillon <boris.brezillon@bootlin.com> wrote:
> > >   
> > > > This patch series is a proposal for a new I3C subsystem.  
> > > 
> > > This v4 has been sent almost a month ago and I didn't get any feedback
> > > so far apart from Rob's R-b. Greg, is there any chance we can get these
> > > patches merged in 4.18? If not, could you tell me what should be
> > > addressed/improved/reworked?  
> > 
> > I'll look over it later this week, thanks.  
> 
> At first glance, it would be great to have at least one other
> reviewed-by or signed-off-by on the main code here.  I don't want to be
> the only one to have to review it :)

I understand. Arnd, Wolfram, any chance you could spend some time
reviewing this patch series? I know Arnd is in vacation for the next few
weeks, so I don't expect him to be able to do that immediately. Also,
Wolfram stated that he didn't have time to review the series in details
when I submitted the v1, I don't know if things have changed since then.

Anyway, I'll keep searching for people to review the code.

Regards,

Boris

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 03/10] i3c: Add sysfs ABI spec
  2018-04-29 13:37   ` Greg Kroah-Hartman
  2018-04-30  9:10     ` Boris Brezillon
@ 2018-05-02  9:47     ` Geert Uytterhoeven
  2018-05-02 11:10       ` Greg Kroah-Hartman
  1 sibling, 1 reply; 51+ messages in thread
From: Geert Uytterhoeven @ 2018-05-02  9:47 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: Boris Brezillon, Wolfram Sang, Linux I2C, Jonathan Corbet,
	linux-doc, Arnd Bergmann, Przemyslaw Sroka, Arkadiusz Golec,
	Alan Douglas, Bartosz Folta, Damian Kos, Alicja Jurasik-Urbaniak,
	Cyprian Wronka, Suresh Punnoose, Rafal Ciepiela,
	Thomas Petazzoni, Nishanth Menon, Rob Herring, Pawel Moll,
	Mark Rutland, Ian Campbell, Kumar Gala,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Linux Kernel Mailing List, Vitor Soares, Linus Walleij,
	Xiang Lin, open list:GPIO SUBSYSTEM

Hi Greg,

On Sun, Apr 29, 2018 at 3:37 PM, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
> On Fri, Mar 30, 2018 at 09:47:44AM +0200, Boris Brezillon wrote:
>> Document sysfs files/directories/symlinks exposed by the I3C subsystem.
>>
>> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
>> ---
>> Changes in v2:
>> - new patch
>> ---
>>  Documentation/ABI/testing/sysfs-bus-i3c | 95 +++++++++++++++++++++++++++++++++
>>  1 file changed, 95 insertions(+)
>>  create mode 100644 Documentation/ABI/testing/sysfs-bus-i3c
>>
>> diff --git a/Documentation/ABI/testing/sysfs-bus-i3c b/Documentation/ABI/testing/sysfs-bus-i3c
>> new file mode 100644
>> index 000000000000..5e88cc093e0e
>> --- /dev/null
>> +++ b/Documentation/ABI/testing/sysfs-bus-i3c
>> @@ -0,0 +1,95 @@
>> +What:                /sys/bus/i3c/devices/i3c-<bus-id>
>> +KernelVersion:  4.16
>
> Wrong kernel versions :)

Do you update these when backporting to stable? ;-)

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 03/10] i3c: Add sysfs ABI spec
  2018-05-02  9:47     ` Geert Uytterhoeven
@ 2018-05-02 11:10       ` Greg Kroah-Hartman
  2018-05-02 11:32         ` Geert Uytterhoeven
  0 siblings, 1 reply; 51+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-02 11:10 UTC (permalink / raw)
  To: Geert Uytterhoeven
  Cc: Boris Brezillon, Wolfram Sang, Linux I2C, Jonathan Corbet,
	linux-doc, Arnd Bergmann, Przemyslaw Sroka, Arkadiusz Golec,
	Alan Douglas, Bartosz Folta, Damian Kos, Alicja Jurasik-Urbaniak,
	Cyprian Wronka, Suresh Punnoose, Rafal Ciepiela,
	Thomas Petazzoni, Nishanth Menon, Rob Herring, Pawel Moll,
	Mark Rutland, Ian Campbell, Kumar Gala,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Linux Kernel Mailing List, Vitor Soares, Linus Walleij,
	Xiang Lin, open list:GPIO SUBSYSTEM

On Wed, May 02, 2018 at 11:47:49AM +0200, Geert Uytterhoeven wrote:
> Hi Greg,
> 
> On Sun, Apr 29, 2018 at 3:37 PM, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> > On Fri, Mar 30, 2018 at 09:47:44AM +0200, Boris Brezillon wrote:
> >> Document sysfs files/directories/symlinks exposed by the I3C subsystem.
> >>
> >> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
> >> ---
> >> Changes in v2:
> >> - new patch
> >> ---
> >>  Documentation/ABI/testing/sysfs-bus-i3c | 95 +++++++++++++++++++++++++++++++++
> >>  1 file changed, 95 insertions(+)
> >>  create mode 100644 Documentation/ABI/testing/sysfs-bus-i3c
> >>
> >> diff --git a/Documentation/ABI/testing/sysfs-bus-i3c b/Documentation/ABI/testing/sysfs-bus-i3c
> >> new file mode 100644
> >> index 000000000000..5e88cc093e0e
> >> --- /dev/null
> >> +++ b/Documentation/ABI/testing/sysfs-bus-i3c
> >> @@ -0,0 +1,95 @@
> >> +What:                /sys/bus/i3c/devices/i3c-<bus-id>
> >> +KernelVersion:  4.16
> >
> > Wrong kernel versions :)
> 
> Do you update these when backporting to stable? ;-)

I'm not adding new features/subsystems to stable :)

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 03/10] i3c: Add sysfs ABI spec
  2018-05-02 11:10       ` Greg Kroah-Hartman
@ 2018-05-02 11:32         ` Geert Uytterhoeven
  0 siblings, 0 replies; 51+ messages in thread
From: Geert Uytterhoeven @ 2018-05-02 11:32 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: Boris Brezillon, Wolfram Sang, Linux I2C, Jonathan Corbet,
	linux-doc, Arnd Bergmann, Przemyslaw Sroka, Arkadiusz Golec,
	Alan Douglas, Bartosz Folta, Damian Kos, Alicja Jurasik-Urbaniak,
	Cyprian Wronka, Suresh Punnoose, Rafal Ciepiela,
	Thomas Petazzoni, Nishanth Menon, Rob Herring, Pawel Moll,
	Mark Rutland, Ian Campbell, Kumar Gala,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Linux Kernel Mailing List, Vitor Soares, Linus Walleij,
	Xiang Lin, open list:GPIO SUBSYSTEM

Hi Greg,

On Wed, May 2, 2018 at 1:10 PM, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
> On Wed, May 02, 2018 at 11:47:49AM +0200, Geert Uytterhoeven wrote:
>> On Sun, Apr 29, 2018 at 3:37 PM, Greg Kroah-Hartman
>> <gregkh@linuxfoundation.org> wrote:
>> > On Fri, Mar 30, 2018 at 09:47:44AM +0200, Boris Brezillon wrote:
>> >> Document sysfs files/directories/symlinks exposed by the I3C subsystem.
>> >>
>> >> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
>> >> ---
>> >> Changes in v2:
>> >> - new patch
>> >> ---
>> >>  Documentation/ABI/testing/sysfs-bus-i3c | 95 +++++++++++++++++++++++++++++++++
>> >>  1 file changed, 95 insertions(+)
>> >>  create mode 100644 Documentation/ABI/testing/sysfs-bus-i3c
>> >>
>> >> diff --git a/Documentation/ABI/testing/sysfs-bus-i3c b/Documentation/ABI/testing/sysfs-bus-i3c
>> >> new file mode 100644
>> >> index 000000000000..5e88cc093e0e
>> >> --- /dev/null
>> >> +++ b/Documentation/ABI/testing/sysfs-bus-i3c
>> >> @@ -0,0 +1,95 @@
>> >> +What:                /sys/bus/i3c/devices/i3c-<bus-id>
>> >> +KernelVersion:  4.16
>> >
>> > Wrong kernel versions :)
>>
>> Do you update these when backporting to stable? ;-)
>
> I'm not adding new features/subsystems to stable :)

True. So let's leave that for the LTSI patch monkey ;-)

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 01/10] i3c: Add core I3C infrastructure
  2018-03-30  7:47 ` [PATCH v4 01/10] i3c: Add core I3C infrastructure Boris Brezillon
@ 2018-06-04  9:11   ` Przemyslaw Gaj
  2018-06-04 11:24     ` Boris Brezillon
  2018-06-14  4:19   ` Wolfram Sang
                     ` (2 subsequent siblings)
  3 siblings, 1 reply; 51+ messages in thread
From: Przemyslaw Gaj @ 2018-06-04  9:11 UTC (permalink / raw)
  To: Boris Brezillon, Wolfram Sang, linux-i2c, Jonathan Corbet,
	linux-doc, Greg Kroah-Hartman, Arnd Bergmann
  Cc: Przemyslaw Sroka, Arkadiusz Golec, Alan Douglas, Bartosz Folta,
	Damian Kos, Alicja Jurasik-Urbaniak, Cyprian Wronka,
	Suresh Punnoose, Rafal Ciepiela, Thomas Petazzoni,
	Nishanth Menon, Rob Herring, Pawel Moll, Mark Rutland,
	Ian Campbell, Kumar Gala, devicetree, linux-kernel, Vitor Soares,
	Geert Uytterhoeven, Linus Walleij, Xiang Lin, linux-gpio

Hi Boris

It looks great, just one comment to DEFSLVS command:

On 6/4/18, 9:32 AM, "Boris Brezillon" <boris.brezillon@bootlin.com> wrote:

    +int i3c_master_defslvs_locked(struct i3c_master_controller *master)
    +{
    +	struct i3c_ccc_cmd_dest dest = {
    +		.addr = I3C_BROADCAST_ADDR,
    +	};
    +	struct i3c_ccc_cmd cmd = {
    +		.id = I3C_CCC_DEFSLVS,
    +		.dests = &dest,
    +		.ndests = 1,
    +	};
    +	struct i3c_ccc_defslvs *defslvs;
    +	struct i3c_ccc_dev_desc *desc;
    +	struct i3c_device *i3cdev;
    +	struct i2c_device *i2cdev;
    +	struct i3c_bus *bus;
    +	bool send = false;
    +	int ndevs = 0, ret;
    +
    +	if (!master)
    +		return -EINVAL;
    +
    +	bus = i3c_master_get_bus(master);
    +	i3c_bus_for_each_i3cdev(bus, i3cdev) {
    +		ndevs++;
    +		if (I3C_BCR_DEVICE_ROLE(i3cdev->info.bcr) == I3C_BCR_I3C_MASTER)
    +			send = true;
    +	}
    +
    +	/* No other master on the bus, skip DEFSLVS. */
    +	if (!send)
    +		return 0;
    +
    +	i3c_bus_for_each_i2cdev(bus, i2cdev)
    +		ndevs++;
    +
    +	dest.payload.len = sizeof(*defslvs) +
    +			   ((ndevs - 1) * sizeof(struct i3c_ccc_dev_desc));
    +	defslvs = kzalloc(dest.payload.len, GFP_KERNEL);
    +	if (!defslvs)
    +		return -ENOMEM;
    +
    +	dest.payload.data = defslvs;
    +
    +	defslvs->count = ndevs;
    +	defslvs->master.bcr = master->this->info.bcr;
    +	defslvs->master.dcr = master->this->info.dcr;
    +	defslvs->master.dyn_addr = master->this->info.dyn_addr;
    +	defslvs->master.static_addr = I3C_BROADCAST_ADDR;
    +
    +	desc = defslvs->slaves;
    +	i3c_bus_for_each_i2cdev(bus, i2cdev) {
    +		desc->lvr = i2cdev->lvr;
    +		desc->static_addr = i2cdev->info.addr;
    +		desc++;
    +	}
    +
    +	i3c_bus_for_each_i3cdev(bus, i3cdev) {
    +		/* Skip the I3C dev representing this master. */
    +		if (i3cdev == master->this)
    +			continue;
    +
    +		desc->bcr = i3cdev->info.bcr;
    +		desc->dcr = i3cdev->info.dcr;
    +		desc->dyn_addr = i3cdev->info.dyn_addr;
    +		desc->static_addr = i3cdev->info.static_addr;
    +		desc++;
    +	}
    +
    +	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
    +	kfree(defslvs);
    +
    +	return ret;
    +}

You should shift all the addresses (dynamic and static) one bit left. 
Addresses are stored on bits [7:1], this is described in MIPI spec, 
section 5.1.9.3.7 Define List of Slaves (DEFSLVS)

Regards,
Przemyslaw Gaj

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 07/10] i3c: master: Add driver for Cadence IP
  2018-03-30  7:47 ` [PATCH v4 07/10] i3c: master: Add driver for Cadence IP Boris Brezillon
@ 2018-06-04  9:24   ` Przemyslaw Gaj
  2018-06-04 11:26     ` Boris Brezillon
  0 siblings, 1 reply; 51+ messages in thread
From: Przemyslaw Gaj @ 2018-06-04  9:24 UTC (permalink / raw)
  To: Boris Brezillon, Wolfram Sang, linux-i2c, Jonathan Corbet,
	linux-doc, Greg Kroah-Hartman, Arnd Bergmann
  Cc: Przemyslaw Sroka, Arkadiusz Golec, Alan Douglas, Bartosz Folta,
	Damian Kos, Alicja Jurasik-Urbaniak, Cyprian Wronka,
	Suresh Punnoose, Rafal Ciepiela, Thomas Petazzoni,
	Nishanth Menon, Rob Herring, Pawel Moll, Mark Rutland,
	Ian Campbell, Kumar Gala, devicetree, linux-kernel, Vitor Soares,
	Geert Uytterhoeven, Linus Walleij, Xiang Lin, linux-gpio

Hi Boris,

Few things regarding Cadence IP driver:

On 6/4/18, 9:31 AM, "Boris Brezillon" <boris.brezillon@bootlin.com> wrote:

    +static void cdns_i3c_master_handle_ibi(struct cdns_i3c_master *master,
    +				       u32 ibir)
    +{
    +	struct cdns_i3c_i2c_dev_data *data;
    +	bool data_consumed = false;
    +	struct i3c_ibi_slot *slot;
    +	u32 id = IBIR_SLVID(ibir);
    +	struct i3c_device *dev;
    +	int len, i, j;
    +	u8 *buf;
    +
    +	/*
    +	 * FIXME: maybe we should report the FIFO OVF errors to the upper
    +	 * layer.
    +	 */
    +	if (id >= master->ibi.num_slots || (ibir & IBIR_ERROR))
    +		goto out;
    +
    +	dev = master->ibi.slots[id];
    +	spin_lock(&master->ibi.lock);
    +
    +	data = i3c_device_get_master_data(dev);
    +	slot = i3c_generic_ibi_get_free_slot(data->ibi_pool);
    +	if (!slot)
    +		goto out_unlock;
    +
    +	buf = slot->data;
    +
    +	len = IBIR_XFER_BYTES(ibir);
    +	for (i = 0; i < IBIR_XFER_BYTES(ibir); i += 4) {
    +		u32 tmp = readl(master->regs + IBI_DATA_FIFO);
    +
    +		for (j = 0; j < 4 && i + j < dev->ibi->max_payload_len; j++)
    +			buf[i + j] = tmp >> (j * 8);
    +
    +	}
    +	slot->len = min_t(unsigned int, IBIR_XFER_BYTES(ibir),
    +			  dev->ibi->max_payload_len);
    +	i3c_master_queue_ibi(dev, slot);
    +	data_consumed = true;
    +
    +out_unlock:
    +	spin_unlock(&master->ibi.lock);
    +
    +out:
    +	/* Consume data from the FIFO if it's not been done already. */
    +	if (!data_consumed) {
    +		for (i = 0; i < IBIR_XFER_BYTES(ibir); i += 4)
    +			readl(master->regs + IBI_DATA_FIFO);
    +	}
    +}
    
len variable is unneeded.

    +static int cdns_i3c_master_probe(struct platform_device *pdev)
    +{
    +	struct cdns_i3c_master *master;
    +	struct resource *res;
    +	int ret, irq;
    +	u32 val;
    +
    +	master = devm_kzalloc(&pdev->dev, sizeof(*master), GFP_KERNEL);
    +	if (!master)
    +		return -ENOMEM;
    +
    +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
    +	master->regs = devm_ioremap_resource(&pdev->dev, res);
    +	if (IS_ERR(master->regs))
    +		return PTR_ERR(master->regs);
    +
    +	master->pclk = devm_clk_get(&pdev->dev, "pclk");
    +	if (IS_ERR(master->pclk))
    +		return PTR_ERR(master->pclk);
    +
    +	master->sysclk = devm_clk_get(&pdev->dev, "sysclk");
    +	if (IS_ERR(master->pclk))
    +		return PTR_ERR(master->pclk);
    +
    +	irq = platform_get_irq(pdev, 0);
    +	if (irq < 0)
    +		return irq;
    +
    +	ret = clk_prepare_enable(master->pclk);
    +	if (ret)
    +		return ret;
    +
    +	ret = clk_prepare_enable(master->sysclk);
    +	if (ret)
    +		goto err_disable_pclk;
    +
    +	if (readl(master->regs + DEV_ID) != DEV_ID_I3C_MASTER) {
    +		ret = -EINVAL;
    +		goto err_disable_sysclk;
    +	}
    +
    +	spin_lock_init(&master->xferqueue.lock);
    +	INIT_LIST_HEAD(&master->xferqueue.list);
    +
    +	INIT_WORK(&master->hj_work, cdns_i3c_master_hj);
    +	writel(0xffffffff, master->regs + MST_IDR);
    +	writel(0xffffffff, master->regs + SLV_IDR);
    +	ret = devm_request_irq(&pdev->dev, irq, cdns_i3c_master_interrupt, 0,
    +			       dev_name(&pdev->dev), master);
    +	if (ret)
    +		goto err_disable_sysclk;
    +
    +	platform_set_drvdata(pdev, master);
    +
    +	val = readl(master->regs + CONF_STATUS0);
    +
    +	/* Device ID0 is reserved to describe this master. */
    +	master->maxdevs = CONF_STATUS0_DEVS_NUM(val);
    +	master->free_rr_slots = GENMASK(master->maxdevs, 1);
    +
    +	val = readl(master->regs + CONF_STATUS1);
    +	master->caps.cmdfifodepth = CONF_STATUS1_CMD_DEPTH(val);
    +	master->caps.rxfifodepth = CONF_STATUS1_RX_DEPTH(val);
    +	master->caps.txfifodepth = CONF_STATUS1_TX_DEPTH(val);
    +	master->caps.ibirfifodepth = 16;

IBI fifo depth is hardcoded. You can read this value from CONF_STATUS0 register.

    +	master->caps.cmdrfifodepth = 16;

CMDR fifo depth is hardcoded. You can read this value from CONF_STATUS0 register also.

    +
    +	spin_lock_init(&master->ibi.lock);
    +	master->ibi.num_slots = CONF_STATUS1_IBI_HW_RES(val);
    +	master->ibi.slots = devm_kzalloc(&pdev->dev,
    +					 sizeof(*master->ibi.slots) *
    +					 master->ibi.num_slots,
    +					 GFP_KERNEL);
    +	if (!master->ibi.slots)
    +		goto err_disable_sysclk;
    +
    +	writel(IBIR_THR(1), master->regs + CMD_IBI_THR_CTRL);
    +	writel(MST_INT_IBIR_THR, master->regs + MST_IER);
    +	writel(DEVS_CTRL_DEV_CLR_ALL, master->regs + DEVS_CTRL);
    +
    +	ret = i3c_master_register(&master->base, &pdev->dev,
    +				  &cdns_i3c_master_ops, false);
    +	if (ret)
    +		goto err_disable_sysclk;
    +
    +	return 0;
    +
    +err_disable_sysclk:
    +	clk_disable_unprepare(master->sysclk);
    +
    +err_disable_pclk:
    +	clk_disable_unprepare(master->pclk);
    +
    +	return ret;
    +}
    
Regards,
Przemyslaw Gaj

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 01/10] i3c: Add core I3C infrastructure
  2018-06-04  9:11   ` Przemyslaw Gaj
@ 2018-06-04 11:24     ` Boris Brezillon
  0 siblings, 0 replies; 51+ messages in thread
From: Boris Brezillon @ 2018-06-04 11:24 UTC (permalink / raw)
  To: Przemyslaw Gaj
  Cc: Wolfram Sang, linux-i2c, Jonathan Corbet, linux-doc,
	Greg Kroah-Hartman, Arnd Bergmann, Przemyslaw Sroka,
	Arkadiusz Golec, Alan Douglas, Bartosz Folta, Damian Kos,
	Alicja Jurasik-Urbaniak, Cyprian Wronka, Suresh Punnoose,
	Rafal Ciepiela, Thomas Petazzoni, Nishanth Menon, Rob Herring,
	Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, devicetree,
	linux-kernel, Vitor Soares, Geert Uytterhoeven, Linus Walleij,
	Xiang Lin, linux-gpio

On Mon, 4 Jun 2018 09:11:25 +0000
Przemyslaw Gaj <pgaj@cadence.com> wrote:

> Hi Boris
> 
> It looks great, just one comment to DEFSLVS command:
> 
> On 6/4/18, 9:32 AM, "Boris Brezillon" <boris.brezillon@bootlin.com> wrote:
> 
>     +int i3c_master_defslvs_locked(struct i3c_master_controller *master)
>     +{
>     +	struct i3c_ccc_cmd_dest dest = {
>     +		.addr = I3C_BROADCAST_ADDR,
>     +	};
>     +	struct i3c_ccc_cmd cmd = {
>     +		.id = I3C_CCC_DEFSLVS,
>     +		.dests = &dest,
>     +		.ndests = 1,
>     +	};
>     +	struct i3c_ccc_defslvs *defslvs;
>     +	struct i3c_ccc_dev_desc *desc;
>     +	struct i3c_device *i3cdev;
>     +	struct i2c_device *i2cdev;
>     +	struct i3c_bus *bus;
>     +	bool send = false;
>     +	int ndevs = 0, ret;
>     +
>     +	if (!master)
>     +		return -EINVAL;
>     +
>     +	bus = i3c_master_get_bus(master);
>     +	i3c_bus_for_each_i3cdev(bus, i3cdev) {
>     +		ndevs++;
>     +		if (I3C_BCR_DEVICE_ROLE(i3cdev->info.bcr) == I3C_BCR_I3C_MASTER)
>     +			send = true;
>     +	}
>     +
>     +	/* No other master on the bus, skip DEFSLVS. */
>     +	if (!send)
>     +		return 0;
>     +
>     +	i3c_bus_for_each_i2cdev(bus, i2cdev)
>     +		ndevs++;
>     +
>     +	dest.payload.len = sizeof(*defslvs) +
>     +			   ((ndevs - 1) * sizeof(struct i3c_ccc_dev_desc));
>     +	defslvs = kzalloc(dest.payload.len, GFP_KERNEL);
>     +	if (!defslvs)
>     +		return -ENOMEM;
>     +
>     +	dest.payload.data = defslvs;
>     +
>     +	defslvs->count = ndevs;
>     +	defslvs->master.bcr = master->this->info.bcr;
>     +	defslvs->master.dcr = master->this->info.dcr;
>     +	defslvs->master.dyn_addr = master->this->info.dyn_addr;
>     +	defslvs->master.static_addr = I3C_BROADCAST_ADDR;
>     +
>     +	desc = defslvs->slaves;
>     +	i3c_bus_for_each_i2cdev(bus, i2cdev) {
>     +		desc->lvr = i2cdev->lvr;
>     +		desc->static_addr = i2cdev->info.addr;
>     +		desc++;
>     +	}
>     +
>     +	i3c_bus_for_each_i3cdev(bus, i3cdev) {
>     +		/* Skip the I3C dev representing this master. */
>     +		if (i3cdev == master->this)
>     +			continue;
>     +
>     +		desc->bcr = i3cdev->info.bcr;
>     +		desc->dcr = i3cdev->info.dcr;
>     +		desc->dyn_addr = i3cdev->info.dyn_addr;
>     +		desc->static_addr = i3cdev->info.static_addr;
>     +		desc++;
>     +	}
>     +
>     +	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
>     +	kfree(defslvs);
>     +
>     +	return ret;
>     +}
> 
> You should shift all the addresses (dynamic and static) one bit left. 
> Addresses are stored on bits [7:1], this is described in MIPI spec, 
> section 5.1.9.3.7 Define List of Slaves (DEFSLVS)

Oops, indeed. I will fix that.

Thanks,

Boris

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 07/10] i3c: master: Add driver for Cadence IP
  2018-06-04  9:24   ` Przemyslaw Gaj
@ 2018-06-04 11:26     ` Boris Brezillon
  0 siblings, 0 replies; 51+ messages in thread
From: Boris Brezillon @ 2018-06-04 11:26 UTC (permalink / raw)
  To: Przemyslaw Gaj
  Cc: Wolfram Sang, linux-i2c, Jonathan Corbet, linux-doc,
	Greg Kroah-Hartman, Arnd Bergmann, Przemyslaw Sroka,
	Arkadiusz Golec, Alan Douglas, Bartosz Folta, Damian Kos,
	Alicja Jurasik-Urbaniak, Cyprian Wronka, Suresh Punnoose,
	Rafal Ciepiela, Thomas Petazzoni, Nishanth Menon, Rob Herring,
	Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, devicetree,
	linux-kernel, Vitor Soares, Geert Uytterhoeven, Linus Walleij,
	Xiang Lin, linux-gpio

Hi Przemek,

On Mon, 4 Jun 2018 09:24:51 +0000
Przemyslaw Gaj <pgaj@cadence.com> wrote:

> Hi Boris,
> 
> Few things regarding Cadence IP driver:
> 
> On 6/4/18, 9:31 AM, "Boris Brezillon" <boris.brezillon@bootlin.com> wrote:
> 
>     +static void cdns_i3c_master_handle_ibi(struct cdns_i3c_master *master,
>     +				       u32 ibir)
>     +{
>     +	struct cdns_i3c_i2c_dev_data *data;
>     +	bool data_consumed = false;
>     +	struct i3c_ibi_slot *slot;
>     +	u32 id = IBIR_SLVID(ibir);
>     +	struct i3c_device *dev;
>     +	int len, i, j;
>     +	u8 *buf;
>     +
>     +	/*
>     +	 * FIXME: maybe we should report the FIFO OVF errors to the upper
>     +	 * layer.
>     +	 */
>     +	if (id >= master->ibi.num_slots || (ibir & IBIR_ERROR))
>     +		goto out;
>     +
>     +	dev = master->ibi.slots[id];
>     +	spin_lock(&master->ibi.lock);
>     +
>     +	data = i3c_device_get_master_data(dev);
>     +	slot = i3c_generic_ibi_get_free_slot(data->ibi_pool);
>     +	if (!slot)
>     +		goto out_unlock;
>     +
>     +	buf = slot->data;
>     +
>     +	len = IBIR_XFER_BYTES(ibir);
>     +	for (i = 0; i < IBIR_XFER_BYTES(ibir); i += 4) {
>     +		u32 tmp = readl(master->regs + IBI_DATA_FIFO);
>     +
>     +		for (j = 0; j < 4 && i + j < dev->ibi->max_payload_len; j++)
>     +			buf[i + j] = tmp >> (j * 8);
>     +
>     +	}
>     +	slot->len = min_t(unsigned int, IBIR_XFER_BYTES(ibir),
>     +			  dev->ibi->max_payload_len);
>     +	i3c_master_queue_ibi(dev, slot);
>     +	data_consumed = true;
>     +
>     +out_unlock:
>     +	spin_unlock(&master->ibi.lock);
>     +
>     +out:
>     +	/* Consume data from the FIFO if it's not been done already. */
>     +	if (!data_consumed) {
>     +		for (i = 0; i < IBIR_XFER_BYTES(ibir); i += 4)
>     +			readl(master->regs + IBI_DATA_FIFO);
>     +	}
>     +}
>     
> len variable is unneeded.

Will get rid of len.

>     +
>     +	/* Device ID0 is reserved to describe this master. */
>     +	master->maxdevs = CONF_STATUS0_DEVS_NUM(val);
>     +	master->free_rr_slots = GENMASK(master->maxdevs, 1);
>     +
>     +	val = readl(master->regs + CONF_STATUS1);
>     +	master->caps.cmdfifodepth = CONF_STATUS1_CMD_DEPTH(val);
>     +	master->caps.rxfifodepth = CONF_STATUS1_RX_DEPTH(val);
>     +	master->caps.txfifodepth = CONF_STATUS1_TX_DEPTH(val);
>     +	master->caps.ibirfifodepth = 16;
> 
> IBI fifo depth is hardcoded. You can read this value from CONF_STATUS0 register.
> 
>     +	master->caps.cmdrfifodepth = 16;
> 
> CMDR fifo depth is hardcoded. You can read this value from CONF_STATUS0 register also.

Sure, I'll use the FIFO depth exposed in CONF_STATUS0.

Thanks,

Boris

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 01/10] i3c: Add core I3C infrastructure
  2018-03-30  7:47 ` [PATCH v4 01/10] i3c: Add core I3C infrastructure Boris Brezillon
  2018-06-04  9:11   ` Przemyslaw Gaj
@ 2018-06-14  4:19   ` Wolfram Sang
  2018-06-14  7:07     ` Boris Brezillon
  2018-06-20 11:37   ` Sekhar Nori
  2018-07-11 14:01   ` Arnd Bergmann
  3 siblings, 1 reply; 51+ messages in thread
From: Wolfram Sang @ 2018-06-14  4:19 UTC (permalink / raw)
  To: Boris Brezillon
  Cc: linux-i2c, Jonathan Corbet, linux-doc, Greg Kroah-Hartman,
	Arnd Bergmann, Przemyslaw Sroka, Arkadiusz Golec, Alan Douglas,
	Bartosz Folta, Damian Kos, Alicja Jurasik-Urbaniak,
	Cyprian Wronka, Suresh Punnoose, Rafal Ciepiela,
	Thomas Petazzoni, Nishanth Menon, Rob Herring, Pawel Moll,
	Mark Rutland, Ian Campbell, Kumar Gala, devicetree, linux-kernel,
	Vitor Soares, Geert Uytterhoeven, Linus Walleij, Xiang Lin,
	linux-gpio

[-- Attachment #1: Type: text/plain, Size: 1073 bytes --]

Hi Boris,

> +/**
> + * struct i3c_priv_xfer - I3C SDR private transfer
> + * @rnw: encodes the transfer direction. true for a read, false for a write
> + * @len: transfer length in bytes of the transfer
> + * @data: input/output buffer
> + */
> +struct i3c_priv_xfer {
> +	bool rnw;
> +	u16 len;
> +	union {
> +		void *in;
> +		const void *out;
> +	} data;

So, this is probably where most payloads end up?

I didn't notice any sign of DMA in these patches, but given my
experiences, DMA will come sooner or later. And in I2C, this was
problematic because then a lot of drivers were in the wild getting their
buffers from everywhere (stack!). We now have an opt-in approach to mark
buffers as DMA-safe.

I don't know if typical I3C transfers will be similar to I2C with
usually small payloads where DMA usually makes not much sense. Yet, I
think, that it might be a good idea to think about how this shall be
handled with I3C right away. Maybe simply enforcing buffers to be
DMA-safe. Or whatever.

A clear rule on that might save you hazzle later.

Regards,

   Wolfram


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 01/10] i3c: Add core I3C infrastructure
  2018-06-14  4:19   ` Wolfram Sang
@ 2018-06-14  7:07     ` Boris Brezillon
  2018-06-14  8:15       ` Wolfram Sang
  0 siblings, 1 reply; 51+ messages in thread
From: Boris Brezillon @ 2018-06-14  7:07 UTC (permalink / raw)
  To: Wolfram Sang
  Cc: linux-i2c, Jonathan Corbet, linux-doc, Greg Kroah-Hartman,
	Arnd Bergmann, Przemyslaw Sroka, Arkadiusz Golec, Alan Douglas,
	Bartosz Folta, Damian Kos, Alicja Jurasik-Urbaniak,
	Cyprian Wronka, Suresh Punnoose, Rafal Ciepiela,
	Thomas Petazzoni, Nishanth Menon, Rob Herring, Pawel Moll,
	Mark Rutland, Ian Campbell, Kumar Gala, devicetree, linux-kernel,
	Vitor Soares, Geert Uytterhoeven, Linus Walleij, Xiang Lin,
	linux-gpio

On Thu, 14 Jun 2018 13:19:42 +0900
Wolfram Sang <wsa@the-dreams.de> wrote:

> Hi Boris,
> 
> > +/**
> > + * struct i3c_priv_xfer - I3C SDR private transfer
> > + * @rnw: encodes the transfer direction. true for a read, false for a write
> > + * @len: transfer length in bytes of the transfer
> > + * @data: input/output buffer
> > + */
> > +struct i3c_priv_xfer {
> > +	bool rnw;
> > +	u16 len;
> > +	union {
> > +		void *in;
> > +		const void *out;
> > +	} data;  
> 
> So, this is probably where most payloads end up?
> 
> I didn't notice any sign of DMA in these patches, but given my
> experiences, DMA will come sooner or later. And in I2C, this was
> problematic because then a lot of drivers were in the wild getting their
> buffers from everywhere (stack!). We now have an opt-in approach to mark
> buffers as DMA-safe.
> 
> I don't know if typical I3C transfers will be similar to I2C with
> usually small payloads where DMA usually makes not much sense. Yet, I
> think, that it might be a good idea to think about how this shall be
> handled with I3C right away. Maybe simply enforcing buffers to be
> DMA-safe. Or whatever.
> 
> A clear rule on that might save you hazzle later.

I completely agree. I'll clarify that and for people to pass DMA-able
buffers to this struct (just as the SPI framework does). Note that we
don't really have a way to ensure that the buffer is actually
DMA-safe from the core, because this notion is architecture/SoC
dependent.

> 
> Regards,
> 
>    Wolfram
> 


^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 01/10] i3c: Add core I3C infrastructure
  2018-06-14  7:07     ` Boris Brezillon
@ 2018-06-14  8:15       ` Wolfram Sang
  0 siblings, 0 replies; 51+ messages in thread
From: Wolfram Sang @ 2018-06-14  8:15 UTC (permalink / raw)
  To: Boris Brezillon
  Cc: linux-i2c, Jonathan Corbet, linux-doc, Greg Kroah-Hartman,
	Arnd Bergmann, Przemyslaw Sroka, Arkadiusz Golec, Alan Douglas,
	Bartosz Folta, Damian Kos, Alicja Jurasik-Urbaniak,
	Cyprian Wronka, Suresh Punnoose, Rafal Ciepiela,
	Thomas Petazzoni, Nishanth Menon, Rob Herring, Pawel Moll,
	Mark Rutland, Ian Campbell, Kumar Gala, devicetree, linux-kernel,
	Vitor Soares, Geert Uytterhoeven, Linus Walleij, Xiang Lin,
	linux-gpio

[-- Attachment #1: Type: text/plain, Size: 913 bytes --]


> > I don't know if typical I3C transfers will be similar to I2C with
> > usually small payloads where DMA usually makes not much sense. Yet, I
> > think, that it might be a good idea to think about how this shall be
> > handled with I3C right away. Maybe simply enforcing buffers to be
> > DMA-safe. Or whatever.
> > 
> > A clear rule on that might save you hazzle later.
> 
> I completely agree. I'll clarify that and for people to pass DMA-able
> buffers to this struct (just as the SPI framework does). Note that we

Ok, cool!

> don't really have a way to ensure that the buffer is actually
> DMA-safe from the core, because this notion is architecture/SoC
> dependent.

True, we can't ensure it at the core. Still, a documented rule will make
it clear that everything else is considered a bug. Much better than a
gray area you have to deal with later.

Kind regards,

   Wolfram


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 01/10] i3c: Add core I3C infrastructure
  2018-03-30  7:47 ` [PATCH v4 01/10] i3c: Add core I3C infrastructure Boris Brezillon
  2018-06-04  9:11   ` Przemyslaw Gaj
  2018-06-14  4:19   ` Wolfram Sang
@ 2018-06-20 11:37   ` Sekhar Nori
  2018-06-20 12:47     ` Boris Brezillon
  2018-07-11 14:01   ` Arnd Bergmann
  3 siblings, 1 reply; 51+ messages in thread
From: Sekhar Nori @ 2018-06-20 11:37 UTC (permalink / raw)
  To: Boris Brezillon, Wolfram Sang, linux-i2c, Jonathan Corbet,
	linux-doc, Greg Kroah-Hartman, Arnd Bergmann
  Cc: Przemyslaw Sroka, Arkadiusz Golec, Alan Douglas, Bartosz Folta,
	Damian Kos, Alicja Jurasik-Urbaniak, Cyprian Wronka,
	Suresh Punnoose, Rafal Ciepiela, Thomas Petazzoni,
	Nishanth Menon, Rob Herring, Pawel Moll, Mark Rutland,
	Ian Campbell, Kumar Gala, devicetree, linux-kernel, Vitor Soares,
	Geert Uytterhoeven, Linus Walleij, Xiang Lin, linux-gpio

Hi Boris,

On Friday 30 March 2018 01:17 PM, Boris Brezillon wrote:
> Add core infrastructure to support I3C in Linux and document it.
> 
> This infrastructure is not complete yet and will be extended over
> time.
> 
> There are a few design choices that are worth mentioning because they
> impact the way I3C device drivers can interact with their devices:
> 
> - all functions used to send I3C/I2C frames must be called in
>   non-atomic context. Mainly done this way to ease implementation, but
>   this is still open to discussion. Please let me know if you think
>   it's worth considering an asynchronous model here
> - the bus element is a separate object and is not implicitly described
>   by the master (as done in I2C). The reason is that I want to be able
>   to handle multiple master connected to the same bus and visible to
>   Linux.
>   In this situation, we should only have one instance of the device and
>   not one per master, and sharing the bus object would be part of the
>   solution to gracefully handle this case.
>   I'm not sure we will ever need to deal with multiple masters
>   controlling the same bus and exposed under Linux, but separating the
>   bus and master concept is pretty easy, hence the decision to do it
>   like that.

There can only be one current master in I3C, so not sure of this
scenario. But agree with bus and master separation.

>   The other benefit of separating the bus and master concepts is that
>   master devices appear under the bus directory in sysfs.
> - I2C backward compatibility has been designed to be transparent to I2C
>   drivers and the I2C subsystem. The I3C master just registers an I2C
>   adapter which creates a new I2C bus. I'd say that, from a
>   representation PoV it's not ideal because what should appear as a
>   single I3C bus exposing I3C and I2C devices here appears as 2
>   different busses connected to each other through the parenting (the
>   I3C master is the parent of the I2C and I3C busses).
>   On the other hand, I don't see a better solution if we want something
>   that is not invasive.
> 
> Missing features in this preliminary version:
> - I3C HDR modes are not supported
> - no support for multi-master and the associated concepts (mastership
>   handover, support for secondary masters, ...)
> - I2C devices can only be described using DT because this is the only
>   use case I have. However, the framework can easily be extended with
>   ACPI and board info support
> - I3C slave framework. This has been completely omitted, but shouldn't
>   have a huge impact on the I3C framework because I3C slaves don't see
>   the whole bus, it's only about handling master requests and generating
>   IBIs. Some of the struct, constant and enum definitions could be
>   shared, but most of the I3C slave framework logic will be different
> 
> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>

> diff --git a/drivers/Makefile b/drivers/Makefile
> index 24cd47014657..999239dc29d4 100644
> --- a/drivers/Makefile
> +++ b/drivers/Makefile
> @@ -111,7 +111,7 @@ obj-$(CONFIG_SERIO)		+= input/serio/
>  obj-$(CONFIG_GAMEPORT)		+= input/gameport/
>  obj-$(CONFIG_INPUT)		+= input/
>  obj-$(CONFIG_RTC_LIB)		+= rtc/
> -obj-y				+= i2c/ media/
> +obj-y				+= i2c/ i3c/ media/
>  obj-$(CONFIG_PPS)		+= pps/
>  obj-y				+= ptp/
>  obj-$(CONFIG_W1)		+= w1/
> diff --git a/drivers/i3c/Kconfig b/drivers/i3c/Kconfig
> new file mode 100644
> index 000000000000..cf3752412ae9
> --- /dev/null
> +++ b/drivers/i3c/Kconfig
> @@ -0,0 +1,24 @@
> +# SPDX-License-Identifier: GPL-2.0
> +
> +menuconfig I3C
> +	tristate "I3C support"
> +	select I2C
> +	help
> +	  I3C is a serial protocol standardized by the MIPI alliance.
> +
> +	  It's supposed to be backward compatible with I2C while providing
> +	  support for high speed transfers and native interrupt support
> +	  without the need for extra pins.
> +
> +	  The I3C protocol also standardizes the slave device types and is
> +	  mainly design to communicate with sensors.

designed

> +
> +	  If you want I3C support, you should say Y here and also to the
> +	  specific driver for your bus adapter(s) below.
> +
> +	  This I3C support can also be built as a module.  If so, the module
> +	  will be called i3c.
> +
> diff --git a/drivers/i3c/core.c b/drivers/i3c/core.c
> new file mode 100644
> index 000000000000..d6d938a785a9
> --- /dev/null
> +++ b/drivers/i3c/core.c

> +static ssize_t bcr_show(struct device *dev,
> +			struct device_attribute *da,
> +			char *buf)
> +{
> +	struct i3c_device *i3cdev = dev_to_i3cdev(dev);
> +	struct i3c_bus *bus = i3c_device_get_bus(i3cdev);
> +	ssize_t ret;
> +
> +	i3c_bus_normaluse_lock(bus);
> +	ret = sprintf(buf, "%x\n", i3cdev->info.bcr);
> +	i3c_bus_normaluse_unlock(bus);
> +
> +	return ret;
> +}
> +static DEVICE_ATTR_RO(bcr);
> +
> +static ssize_t dcr_show(struct device *dev,
> +			struct device_attribute *da,
> +			char *buf)
> +{
> +	struct i3c_device *i3cdev = dev_to_i3cdev(dev);
> +	struct i3c_bus *bus = i3c_device_get_bus(i3cdev);
> +	ssize_t ret;
> +
> +	i3c_bus_normaluse_lock(bus);
> +	ret = sprintf(buf, "%x\n", i3cdev->info.dcr);
> +	i3c_bus_normaluse_unlock(bus);
> +
> +	return ret;
> +}
> +static DEVICE_ATTR_RO(dcr);
> +
> +static ssize_t pid_show(struct device *dev,
> +			struct device_attribute *da,
> +			char *buf)
> +{
> +	struct i3c_device *i3cdev = dev_to_i3cdev(dev);
> +	struct i3c_bus *bus = i3c_device_get_bus(i3cdev);
> +	ssize_t ret;
> +
> +	i3c_bus_normaluse_lock(bus);
> +	ret = sprintf(buf, "%llx\n", i3cdev->info.pid);
> +	i3c_bus_normaluse_unlock(bus);
> +
> +	return ret;
> +}
> +static DEVICE_ATTR_RO(pid);
> +
> +static ssize_t address_show(struct device *dev,
> +			    struct device_attribute *da,
> +			    char *buf)
> +{
> +	struct i3c_device *i3cdev = dev_to_i3cdev(dev);
> +	struct i3c_bus *bus = i3c_device_get_bus(i3cdev);
> +	ssize_t ret;
> +
> +	i3c_bus_normaluse_lock(bus);
> +	ret = sprintf(buf, "%02x\n", i3cdev->info.dyn_addr);
> +	i3c_bus_normaluse_unlock(bus);
> +
> +	return ret;
> +}
> +static DEVICE_ATTR_RO(address);

should there be separate entries for dynamic and static address?

If yes, you could also reduce the boilerplate by using a macro taking
attribute name and format string.

> +static int i3c_device_uevent(struct device *dev, struct kobj_uevent_env *env)
> +{
> +	struct i3c_device *i3cdev = dev_to_i3cdev(dev);
> +	u16 manuf = I3C_PID_MANUF_ID(i3cdev->info.pid);
> +	u16 part = I3C_PID_PART_ID(i3cdev->info.pid);
> +	u16 ext = I3C_PID_EXTRA_INFO(i3cdev->info.pid);
> +
> +	if (I3C_PID_RND_LOWER_32BITS(i3cdev->info.pid))
> +		return add_uevent_var(env, "MODALIAS=i3c:dcr%02Xmanuf%04X",
> +				      i3cdev->info.dcr, manuf);
> +
> +	return add_uevent_var(env,
> +			      "MODALIAS=i3c:dcr%02Xmanuf%04Xpart%04xext%04x",
> +			      i3cdev->info.dcr, manuf, part, ext);

instance id should also be passed in the non-random case?

> +}

> +static const struct i3c_device_id *
> +i3c_device_match_id(struct i3c_device *i3cdev,
> +		    const struct i3c_device_id *id_table)
> +{
> +	const struct i3c_device_id *id;
> +
> +	/*
> +	 * The lower 32bits of the provisional ID is just filled with a random
> +	 * value, try to match using DCR info.
> +	 */
> +	if (!I3C_PID_RND_LOWER_32BITS(i3cdev->info.pid)) {
> +		u16 manuf = I3C_PID_MANUF_ID(i3cdev->info.pid);
> +		u16 part = I3C_PID_PART_ID(i3cdev->info.pid);
> +		u16 ext_info = I3C_PID_EXTRA_INFO(i3cdev->info.pid);
> +
> +		/* First try to match by manufacturer/part ID. */
> +		for (id = id_table; id->match_flags != 0; id++) {
> +			if ((id->match_flags & I3C_MATCH_MANUF_AND_PART) !=
> +			    I3C_MATCH_MANUF_AND_PART)
> +				continue;
> +
> +			if (manuf != id->manuf_id || part != id->part_id)
> +				continue;
> +
> +			if ((id->match_flags & I3C_MATCH_EXTRA_INFO) &&
> +			    ext_info != id->extra_info)
> +				continue;
> +
> +			return id;

Here too, instance id is ignored. Seems like done on purpose?

> +		}
> +	}
> +
> +	/* Fallback to DCR match. */
> +	for (id = id_table; id->match_flags != 0; id++) {
> +		if ((id->match_flags & I3C_MATCH_DCR) &&
> +		    id->dcr == i3cdev->info.dcr)
> +			return id;
> +	}
> +
> +	return NULL;
> +}

> +static int i3c_device_probe(struct device *dev)
> +{
> +	struct i3c_device *i3cdev = dev_to_i3cdev(dev);
> +	struct i3c_driver *driver = drv_to_i3cdrv(dev->driver);
> +
> +	return driver->probe(i3cdev);

Should you pm_runtime enable the device before probe? Like done for PCI
in local_pci_probe() for example. Or I guess thats a problem because I2C
devices don't expect it?

> diff --git a/drivers/i3c/device.c b/drivers/i3c/device.c
> new file mode 100644
> index 000000000000..8948d9bdec82
> --- /dev/null
> +++ b/drivers/i3c/device.c
> @@ -0,0 +1,294 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2017 Cadence Design Systems Inc.

2018 now :)

> + *
> + * Author: Boris Brezillon <boris.brezillon@bootlin.com>
> + */
> +
> +#include <linux/atomic.h>
> +#include <linux/bug.h>
> +#include <linux/completion.h>
> +#include <linux/device.h>
> +#include <linux/mutex.h>
> +#include <linux/slab.h>
> +
> +#include "internals.h"
> +
> +/**
> + * i3c_device_do_priv_xfers() - do I3C SDR private transfers directed to a
> + *				specific device
> + *
> + * @dev: device with which the transfers should be done
> + * @xfers: array of transfers
> + * @nxfers: number of transfers
> + *
> + * Initiate one or several private SDR transfers with @dev.
> + *
> + * This function can sleep and thus cannot be called in atomic context.
> + *
> + * Return: 0 in case of success, a negative error core otherwise.
> + */

Curious why you specifically call out SDR here. It could be HDR too, in
future. Right?

> +int i3c_device_do_priv_xfers(struct i3c_device *dev,
> +			     struct i3c_priv_xfer *xfers,
> +			     int nxfers)
> +{
> +	struct i3c_master_controller *master;
> +	int ret, i;
> +
> +	if (nxfers < 1)
> +		return 0;
> +
> +	master = i3c_device_get_master(dev);
> +	if (!master || !xfers)
> +		return -EINVAL;
> +
> +	if (!master->ops->priv_xfers)
> +		return -ENOTSUPP;
> +
> +	for (i = 0; i < nxfers; i++) {
> +		if (!xfers[i].len || !xfers[i].data.in)
> +			return -EINVAL;
> +	}
> +
> +	i3c_bus_normaluse_lock(master->bus);
> +	ret = master->ops->priv_xfers(dev, xfers, nxfers);
> +	i3c_bus_normaluse_unlock(master->bus);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(i3c_device_do_priv_xfers);

> +/**
> + * struct i3c_device_info - I3C device information
> + * @pid: Provisional ID
> + * @bcr: Bus Characteristic Register
> + * @dcr: Device Characteristic Register
> + * @static_addr: static/I2C address
> + * @dyn_addr: dynamic address
> + * @hdr_cap: supported HDR modes

This is just for querying and display device capability. We dont
actually enter HDR mode at the moment, right?

> + * @max_read_ds: max read speed information
> + * @max_write_ds: max write speed information
> + * @max_ibi_len: max IBI payload length
> + * @max_read_turnaround: max read turn-around time in micro-seconds
> + * @max_read_len: max private SDR read length in bytes
> + * @max_write_len: max private SDR write length in bytes
> + *
> + * These are all basic information that should be advertised by an I3C device.
> + * Some of them are optional depending on the device type and device
> + * capabilities.
> + * For each I3C slave attached to a master with
> + * i3c_master_add_i3c_dev_locked(), the core will send the relevant CCC command
> + * to retrieve these data.
> + */
> +struct i3c_device_info {
> +	u64 pid;
> +	u8 bcr;
> +	u8 dcr;
> +	u8 static_addr;
> +	u8 dyn_addr;
> +	u8 hdr_cap;
> +	u8 max_read_ds;
> +	u8 max_write_ds;
> +	u8 max_ibi_len;
> +	u32 max_read_turnaround;
> +	u16 max_read_len;
> +	u16 max_write_len;
> +};

Thanks,
Sekhar

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 01/10] i3c: Add core I3C infrastructure
  2018-06-20 11:37   ` Sekhar Nori
@ 2018-06-20 12:47     ` Boris Brezillon
  0 siblings, 0 replies; 51+ messages in thread
From: Boris Brezillon @ 2018-06-20 12:47 UTC (permalink / raw)
  To: Sekhar Nori
  Cc: Wolfram Sang, linux-i2c, Jonathan Corbet, linux-doc,
	Greg Kroah-Hartman, Arnd Bergmann, Przemyslaw Sroka,
	Arkadiusz Golec, Alan Douglas, Bartosz Folta, Damian Kos,
	Alicja Jurasik-Urbaniak, Cyprian Wronka, Suresh Punnoose,
	Rafal Ciepiela, Thomas Petazzoni, Nishanth Menon, Rob Herring,
	Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, devicetree,
	linux-kernel, Vitor Soares, Geert Uytterhoeven, Linus Walleij,
	Xiang Lin, linux-gpio

Hi Sekhar,

On Wed, 20 Jun 2018 17:07:53 +0530
Sekhar Nori <nsekhar@ti.com> wrote:

> Hi Boris,
> 
> On Friday 30 March 2018 01:17 PM, Boris Brezillon wrote:
> > Add core infrastructure to support I3C in Linux and document it.
> > 
> > This infrastructure is not complete yet and will be extended over
> > time.
> > 
> > There are a few design choices that are worth mentioning because they
> > impact the way I3C device drivers can interact with their devices:
> > 
> > - all functions used to send I3C/I2C frames must be called in
> >   non-atomic context. Mainly done this way to ease implementation, but
> >   this is still open to discussion. Please let me know if you think
> >   it's worth considering an asynchronous model here
> > - the bus element is a separate object and is not implicitly described
> >   by the master (as done in I2C). The reason is that I want to be able
> >   to handle multiple master connected to the same bus and visible to
> >   Linux.
> >   In this situation, we should only have one instance of the device and
> >   not one per master, and sharing the bus object would be part of the
> >   solution to gracefully handle this case.
> >   I'm not sure we will ever need to deal with multiple masters
> >   controlling the same bus and exposed under Linux, but separating the
> >   bus and master concept is pretty easy, hence the decision to do it
> >   like that.  
> 
> There can only be one current master in I3C, so not sure of this
> scenario.

Yes, there's only one active master at any time, but still, you can
have several masters (one primary and several secondary masters)
connected to the same bus, and you might even have several of them
controlled by the same Linux instance (don't really see a use case for
that right now, but I'm pretty sure this will happen).
The point of having a single bus instance pointed by various I3C masters
in this case is to avoid exposing several times the same I3C device.
If we don't do that we would have one I3C device instance per I3C master
exposed under Linux even though they all control the same physical
device.

> But agree with bus and master separation.
> 
> >   The other benefit of separating the bus and master concepts is that
> >   master devices appear under the bus directory in sysfs.
> > - I2C backward compatibility has been designed to be transparent to I2C
> >   drivers and the I2C subsystem. The I3C master just registers an I2C
> >   adapter which creates a new I2C bus. I'd say that, from a
> >   representation PoV it's not ideal because what should appear as a
> >   single I3C bus exposing I3C and I2C devices here appears as 2
> >   different busses connected to each other through the parenting (the
> >   I3C master is the parent of the I2C and I3C busses).
> >   On the other hand, I don't see a better solution if we want something
> >   that is not invasive.
> > 
> > Missing features in this preliminary version:
> > - I3C HDR modes are not supported
> > - no support for multi-master and the associated concepts (mastership
> >   handover, support for secondary masters, ...)
> > - I2C devices can only be described using DT because this is the only
> >   use case I have. However, the framework can easily be extended with
> >   ACPI and board info support
> > - I3C slave framework. This has been completely omitted, but shouldn't
> >   have a huge impact on the I3C framework because I3C slaves don't see
> >   the whole bus, it's only about handling master requests and generating
> >   IBIs. Some of the struct, constant and enum definitions could be
> >   shared, but most of the I3C slave framework logic will be different
> > 
> > Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>  
> 
> > diff --git a/drivers/Makefile b/drivers/Makefile
> > index 24cd47014657..999239dc29d4 100644
> > --- a/drivers/Makefile
> > +++ b/drivers/Makefile
> > @@ -111,7 +111,7 @@ obj-$(CONFIG_SERIO)		+= input/serio/
> >  obj-$(CONFIG_GAMEPORT)		+= input/gameport/
> >  obj-$(CONFIG_INPUT)		+= input/
> >  obj-$(CONFIG_RTC_LIB)		+= rtc/
> > -obj-y				+= i2c/ media/
> > +obj-y				+= i2c/ i3c/ media/
> >  obj-$(CONFIG_PPS)		+= pps/
> >  obj-y				+= ptp/
> >  obj-$(CONFIG_W1)		+= w1/
> > diff --git a/drivers/i3c/Kconfig b/drivers/i3c/Kconfig
> > new file mode 100644
> > index 000000000000..cf3752412ae9
> > --- /dev/null
> > +++ b/drivers/i3c/Kconfig
> > @@ -0,0 +1,24 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +
> > +menuconfig I3C
> > +	tristate "I3C support"
> > +	select I2C
> > +	help
> > +	  I3C is a serial protocol standardized by the MIPI alliance.
> > +
> > +	  It's supposed to be backward compatible with I2C while providing
> > +	  support for high speed transfers and native interrupt support
> > +	  without the need for extra pins.
> > +
> > +	  The I3C protocol also standardizes the slave device types and is
> > +	  mainly design to communicate with sensors.  
> 
> designed

Will fix that.

> 
> > +
> > +	  If you want I3C support, you should say Y here and also to the
> > +	  specific driver for your bus adapter(s) below.
> > +
> > +	  This I3C support can also be built as a module.  If so, the module
> > +	  will be called i3c.
> > +
> > diff --git a/drivers/i3c/core.c b/drivers/i3c/core.c
> > new file mode 100644
> > index 000000000000..d6d938a785a9
> > --- /dev/null
> > +++ b/drivers/i3c/core.c  
> 
> > +static ssize_t bcr_show(struct device *dev,
> > +			struct device_attribute *da,
> > +			char *buf)
> > +{
> > +	struct i3c_device *i3cdev = dev_to_i3cdev(dev);
> > +	struct i3c_bus *bus = i3c_device_get_bus(i3cdev);
> > +	ssize_t ret;
> > +
> > +	i3c_bus_normaluse_lock(bus);
> > +	ret = sprintf(buf, "%x\n", i3cdev->info.bcr);
> > +	i3c_bus_normaluse_unlock(bus);
> > +
> > +	return ret;
> > +}
> > +static DEVICE_ATTR_RO(bcr);
> > +
> > +static ssize_t dcr_show(struct device *dev,
> > +			struct device_attribute *da,
> > +			char *buf)
> > +{
> > +	struct i3c_device *i3cdev = dev_to_i3cdev(dev);
> > +	struct i3c_bus *bus = i3c_device_get_bus(i3cdev);
> > +	ssize_t ret;
> > +
> > +	i3c_bus_normaluse_lock(bus);
> > +	ret = sprintf(buf, "%x\n", i3cdev->info.dcr);
> > +	i3c_bus_normaluse_unlock(bus);
> > +
> > +	return ret;
> > +}
> > +static DEVICE_ATTR_RO(dcr);
> > +
> > +static ssize_t pid_show(struct device *dev,
> > +			struct device_attribute *da,
> > +			char *buf)
> > +{
> > +	struct i3c_device *i3cdev = dev_to_i3cdev(dev);
> > +	struct i3c_bus *bus = i3c_device_get_bus(i3cdev);
> > +	ssize_t ret;
> > +
> > +	i3c_bus_normaluse_lock(bus);
> > +	ret = sprintf(buf, "%llx\n", i3cdev->info.pid);
> > +	i3c_bus_normaluse_unlock(bus);
> > +
> > +	return ret;
> > +}
> > +static DEVICE_ATTR_RO(pid);
> > +
> > +static ssize_t address_show(struct device *dev,
> > +			    struct device_attribute *da,
> > +			    char *buf)
> > +{
> > +	struct i3c_device *i3cdev = dev_to_i3cdev(dev);
> > +	struct i3c_bus *bus = i3c_device_get_bus(i3cdev);
> > +	ssize_t ret;
> > +
> > +	i3c_bus_normaluse_lock(bus);
> > +	ret = sprintf(buf, "%02x\n", i3cdev->info.dyn_addr);
> > +	i3c_bus_normaluse_unlock(bus);
> > +
> > +	return ret;
> > +}
> > +static DEVICE_ATTR_RO(address);  
> 
> should there be separate entries for dynamic and static address?

I didn't think exposing the static address was needed since it's never
used except at initialization time.

> 
> If yes, you could also reduce the boilerplate by using a macro taking
> attribute name and format string.

Hm, don't see the need for that yet, even if we expose both static and
dynamic addresses. It's not like you'll save hundreds lines of code by
doing that, we're talking about 10 lines.

> 
> > +static int i3c_device_uevent(struct device *dev, struct kobj_uevent_env *env)
> > +{
> > +	struct i3c_device *i3cdev = dev_to_i3cdev(dev);
> > +	u16 manuf = I3C_PID_MANUF_ID(i3cdev->info.pid);
> > +	u16 part = I3C_PID_PART_ID(i3cdev->info.pid);
> > +	u16 ext = I3C_PID_EXTRA_INFO(i3cdev->info.pid);
> > +
> > +	if (I3C_PID_RND_LOWER_32BITS(i3cdev->info.pid))
> > +		return add_uevent_var(env, "MODALIAS=i3c:dcr%02Xmanuf%04X",
> > +				      i3cdev->info.dcr, manuf);
> > +
> > +	return add_uevent_var(env,
> > +			      "MODALIAS=i3c:dcr%02Xmanuf%04Xpart%04xext%04x",
> > +			      i3cdev->info.dcr, manuf, part, ext);  
> 
> instance id should also be passed in the non-random case?

MODALIAS is used by user space to know which module should be loaded
when a device is connected on the bus. Why would we need to know the
instance ID? In comparison, the USB subsystem does not pass the
->iSerialNumber value in MODALIAS.

> 
> > +}  
> 
> > +static const struct i3c_device_id *
> > +i3c_device_match_id(struct i3c_device *i3cdev,
> > +		    const struct i3c_device_id *id_table)
> > +{
> > +	const struct i3c_device_id *id;
> > +
> > +	/*
> > +	 * The lower 32bits of the provisional ID is just filled with a random
> > +	 * value, try to match using DCR info.
> > +	 */
> > +	if (!I3C_PID_RND_LOWER_32BITS(i3cdev->info.pid)) {
> > +		u16 manuf = I3C_PID_MANUF_ID(i3cdev->info.pid);
> > +		u16 part = I3C_PID_PART_ID(i3cdev->info.pid);
> > +		u16 ext_info = I3C_PID_EXTRA_INFO(i3cdev->info.pid);
> > +
> > +		/* First try to match by manufacturer/part ID. */
> > +		for (id = id_table; id->match_flags != 0; id++) {
> > +			if ((id->match_flags & I3C_MATCH_MANUF_AND_PART) !=
> > +			    I3C_MATCH_MANUF_AND_PART)
> > +				continue;
> > +
> > +			if (manuf != id->manuf_id || part != id->part_id)
> > +				continue;
> > +
> > +			if ((id->match_flags & I3C_MATCH_EXTRA_INFO) &&
> > +			    ext_info != id->extra_info)
> > +				continue;
> > +
> > +			return id;  
> 
> Here too, instance id is ignored. Seems like done on purpose?

Yes, it's done on purpose, the instance ID does not impact the
driver selection logic, it's just a way to uniquely identify devices of
the same type on an I3C bus.

> 
> > +		}
> > +	}
> > +
> > +	/* Fallback to DCR match. */
> > +	for (id = id_table; id->match_flags != 0; id++) {
> > +		if ((id->match_flags & I3C_MATCH_DCR) &&
> > +		    id->dcr == i3cdev->info.dcr)
> > +			return id;
> > +	}
> > +
> > +	return NULL;
> > +}  
> 
> > +static int i3c_device_probe(struct device *dev)
> > +{
> > +	struct i3c_device *i3cdev = dev_to_i3cdev(dev);
> > +	struct i3c_driver *driver = drv_to_i3cdrv(dev->driver);
> > +
> > +	return driver->probe(i3cdev);  
> 
> Should you pm_runtime enable the device before probe? Like done for PCI
> in local_pci_probe() for example.

Hm, I'm not sure, but I'd say that it's the device driver responsibility
to do that.

> Or I guess thats a problem because I2C
> devices don't expect it?

I2C device probing is not handled here, so that shouldn't be a problem.
Still, I think we should wait for a real need before deciding whether
calling pm_runtime enable() from the core is a wise thing to do or not.

> 
> > diff --git a/drivers/i3c/device.c b/drivers/i3c/device.c
> > new file mode 100644
> > index 000000000000..8948d9bdec82
> > --- /dev/null
> > +++ b/drivers/i3c/device.c
> > @@ -0,0 +1,294 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (C) 2017 Cadence Design Systems Inc.  
> 
> 2018 now :)

Will change all dates.

> 
> > + *
> > + * Author: Boris Brezillon <boris.brezillon@bootlin.com>
> > + */
> > +
> > +#include <linux/atomic.h>
> > +#include <linux/bug.h>
> > +#include <linux/completion.h>
> > +#include <linux/device.h>
> > +#include <linux/mutex.h>
> > +#include <linux/slab.h>
> > +
> > +#include "internals.h"
> > +
> > +/**
> > + * i3c_device_do_priv_xfers() - do I3C SDR private transfers directed to a
> > + *				specific device
> > + *
> > + * @dev: device with which the transfers should be done
> > + * @xfers: array of transfers
> > + * @nxfers: number of transfers
> > + *
> > + * Initiate one or several private SDR transfers with @dev.
> > + *
> > + * This function can sleep and thus cannot be called in atomic context.
> > + *
> > + * Return: 0 in case of success, a negative error core otherwise.
> > + */  
> 
> Curious why you specifically call out SDR here. It could be HDR too, in
> future. Right?

HDR transfers will be handled through a different function (see the
previous version of this patch series where HDR modes were supported).
Regarding the name itself, I just followed the naming used in the I3C
spec, but I fine changing _priv_ by _sdr_ if you prefer.

> 
> > +int i3c_device_do_priv_xfers(struct i3c_device *dev,
> > +			     struct i3c_priv_xfer *xfers,
> > +			     int nxfers)
> > +{
> > +	struct i3c_master_controller *master;
> > +	int ret, i;
> > +
> > +	if (nxfers < 1)
> > +		return 0;
> > +
> > +	master = i3c_device_get_master(dev);
> > +	if (!master || !xfers)
> > +		return -EINVAL;
> > +
> > +	if (!master->ops->priv_xfers)
> > +		return -ENOTSUPP;
> > +
> > +	for (i = 0; i < nxfers; i++) {
> > +		if (!xfers[i].len || !xfers[i].data.in)
> > +			return -EINVAL;
> > +	}
> > +
> > +	i3c_bus_normaluse_lock(master->bus);
> > +	ret = master->ops->priv_xfers(dev, xfers, nxfers);
> > +	i3c_bus_normaluse_unlock(master->bus);
> > +
> > +	return ret;
> > +}
> > +EXPORT_SYMBOL_GPL(i3c_device_do_priv_xfers);  
> 
> > +/**
> > + * struct i3c_device_info - I3C device information
> > + * @pid: Provisional ID
> > + * @bcr: Bus Characteristic Register
> > + * @dcr: Device Characteristic Register
> > + * @static_addr: static/I2C address
> > + * @dyn_addr: dynamic address
> > + * @hdr_cap: supported HDR modes  
> 
> This is just for querying and display device capability. We dont
> actually enter HDR mode at the moment, right?

Right now it is, but is will be used when we'll later add HDR
support (see v3 of this series if you want to have an idea of what
the HDR API looks like) ;-).

> 
> > + * @max_read_ds: max read speed information
> > + * @max_write_ds: max write speed information
> > + * @max_ibi_len: max IBI payload length
> > + * @max_read_turnaround: max read turn-around time in micro-seconds
> > + * @max_read_len: max private SDR read length in bytes
> > + * @max_write_len: max private SDR write length in bytes
> > + *
> > + * These are all basic information that should be advertised by an I3C device.
> > + * Some of them are optional depending on the device type and device
> > + * capabilities.
> > + * For each I3C slave attached to a master with
> > + * i3c_master_add_i3c_dev_locked(), the core will send the relevant CCC command
> > + * to retrieve these data.
> > + */
> > +struct i3c_device_info {
> > +	u64 pid;
> > +	u8 bcr;
> > +	u8 dcr;
> > +	u8 static_addr;
> > +	u8 dyn_addr;
> > +	u8 hdr_cap;
> > +	u8 max_read_ds;
> > +	u8 max_write_ds;
> > +	u8 max_ibi_len;
> > +	u32 max_read_turnaround;
> > +	u16 max_read_len;
> > +	u16 max_write_len;
> > +};  
> 

Thanks for your review.

Boris


^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 09/10] gpio: Add a driver for Cadence I3C GPIO expander
  2018-04-26  8:44   ` Linus Walleij
@ 2018-06-22  8:24     ` Boris Brezillon
  0 siblings, 0 replies; 51+ messages in thread
From: Boris Brezillon @ 2018-06-22  8:24 UTC (permalink / raw)
  To: Linus Walleij
  Cc: Wolfram Sang, linux-i2c, Jonathan Corbet, linux-doc,
	Greg Kroah-Hartman, Arnd Bergmann, Przemyslaw Sroka,
	Arkadiusz Golec, Alan Douglas, Bartosz Folta, Damian Kos,
	Alicja Jurasik-Urbaniak, Cyprian Wronka, Suresh Punnoose,
	Rafal Ciepiela, Thomas Petazzoni, Nishanth Menon, Rob Herring,
	Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	linux-kernel, Vitor Soares, Geert Uytterhoeven, Xiang Lin,
	open list:GPIO SUBSYSTEM

Hi Linus,

I realize I never replied to this review.

On Thu, 26 Apr 2018 10:44:26 +0200
Linus Walleij <linus.walleij@linaro.org> wrote:

> On Fri, Mar 30, 2018 at 9:47 AM, Boris Brezillon
> <boris.brezillon@bootlin.com> wrote:
> 
> > Add a driver for Cadence I3C GPIO expander.
> >
> > Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>  
> 
> This is pretty much OK, and I don't want to raise the bar
> even higher for you to get this code into the kernel, so:
> Acked-by: Linus Walleij <linus.walleij@linaro.org>

Thanks.

> 
> The following is an observation for future improvement:
> 
> > +static int cdns_i3c_gpio_read_reg(struct cdns_i3c_gpio *gpioc, u8 reg,
> > +                                 u8 *val)
> > +{
> > +       struct i3c_priv_xfer xfers[] = {
> > +               {
> > +                       .len = sizeof(reg),
> > +                       .data.out = &reg,
> > +               },
> > +               {
> > +                       .rnw = true,
> > +                       .len = sizeof(*val),
> > +                       .data.in = val,
> > +               },
> > +       };
> > +
> > +       return i3c_device_do_priv_xfers(gpioc->i3cdev, xfers,
> > +                                       ARRAY_SIZE(xfers));
> > +}
> > +
> > +static int cdns_i3c_gpio_write_reg(struct cdns_i3c_gpio *gpioc, u8 reg,
> > +                                  u8 val)
> > +{
> > +       struct i3c_priv_xfer xfers[] = {
> > +               {
> > +                       .len = sizeof(reg),
> > +                       .data.out = &reg,
> > +               },
> > +               {
> > +                       .len = sizeof(val),
> > +                       .data.out = &val,
> > +               },
> > +       };
> > +
> > +       return i3c_device_do_priv_xfers(gpioc->i3cdev, xfers,
> > +                                       ARRAY_SIZE(xfers));
> > +}  
> 
> This is starting to resemble
> drivers/base/regmap/regmap-i2c.c
> 
> Maybe we should very quickly add regmap-i3c.c as this
> infrastructre has had a great positive effect on may kernel
> subsystems.

Yes I considered that too, I was just waiting for at least one
other user before adding this regmap-i3c implementation.

> 
> > +static int cdns_i3c_gpio_get_direction(struct gpio_chip *g, unsigned offset)
> > +{
> > +       struct cdns_i3c_gpio *gpioc = gpioc_to_cdns_gpioc(g);
> > +
> > +       return gpioc->dir & BIT(offset);  
> 
> I would:
> 
> return !!(gpioc->dir & BIT(offset));
> 
> So you clamp it to bit 0.

Will fix that in my v5.

Thanks for your review.

Boris

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 01/10] i3c: Add core I3C infrastructure
  2018-03-30  7:47 ` [PATCH v4 01/10] i3c: Add core I3C infrastructure Boris Brezillon
                     ` (2 preceding siblings ...)
  2018-06-20 11:37   ` Sekhar Nori
@ 2018-07-11 14:01   ` Arnd Bergmann
  2018-07-11 14:41     ` Boris Brezillon
  3 siblings, 1 reply; 51+ messages in thread
From: Arnd Bergmann @ 2018-07-11 14:01 UTC (permalink / raw)
  To: Boris Brezillon
  Cc: Wolfram Sang, linux-i2c, Jonathan Corbet,
	open list:DOCUMENTATION, Greg Kroah-Hartman, Przemyslaw Sroka,
	Arkadiusz Golec, Alan Douglas, Bartosz Folta, Damian Kos,
	Alicja Jurasik-Urbaniak, Cyprian Wronka, Suresh Punnoose,
	Rafal Ciepiela, Thomas Petazzoni, Nishanth Menon, Rob Herring,
	Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, DTML,
	Linux Kernel Mailing List, Vitor Soares, Geert Uytterhoeven,
	Linus Walleij, Xiang Lin, linux-gpio

On Fri, Mar 30, 2018 at 9:47 AM, Boris Brezillon
<boris.brezillon@bootlin.com> wrote:
> Add core infrastructure to support I3C in Linux and document it.
>
> This infrastructure is not complete yet and will be extended over
> time.
>
> There are a few design choices that are worth mentioning because they
> impact the way I3C device drivers can interact with their devices:
>
> - all functions used to send I3C/I2C frames must be called in
>   non-atomic context. Mainly done this way to ease implementation, but
>   this is still open to discussion. Please let me know if you think
>   it's worth considering an asynchronous model here

This sounds like it can be changed later if it turns out necessary, so
that's fine to me.

> - the bus element is a separate object and is not implicitly described
>   by the master (as done in I2C). The reason is that I want to be able
>   to handle multiple master connected to the same bus and visible to
>   Linux.
>   In this situation, we should only have one instance of the device and
>   not one per master, and sharing the bus object would be part of the
>   solution to gracefully handle this case.
>   I'm not sure we will ever need to deal with multiple masters
>   controlling the same bus and exposed under Linux, but separating the
>   bus and master concept is pretty easy, hence the decision to do it
>   like that.
>   The other benefit of separating the bus and master concepts is that
>   master devices appear under the bus directory in sysfs.

I'm not following here at all, sorry for missing prior discussion if this
was already explained. What is the "multiple master" case? Do you
mean multiple devices that are controlled by Linux and that each talk
to other devices on the same bus, multiple operating systems that
have talk to are able to own the bus with the kernel being one of
them, a controller that controls multiple independent buses,
or something else?

> - I2C backward compatibility has been designed to be transparent to I2C
>   drivers and the I2C subsystem. The I3C master just registers an I2C
>   adapter which creates a new I2C bus. I'd say that, from a
>   representation PoV it's not ideal because what should appear as a
>   single I3C bus exposing I3C and I2C devices here appears as 2
>   different busses connected to each other through the parenting (the
>   I3C master is the parent of the I2C and I3C busses).
>   On the other hand, I don't see a better solution if we want something
>   that is not invasive.

Right, this seems like a reasonable compromise.

> Missing features in this preliminary version:
> - I3C HDR modes are not supported
> - no support for multi-master and the associated concepts (mastership
>   handover, support for secondary masters, ...)
> - I2C devices can only be described using DT because this is the only
>   use case I have. However, the framework can easily be extended with
>   ACPI and board info support
> - I3C slave framework. This has been completely omitted, but shouldn't
>   have a huge impact on the I3C framework because I3C slaves don't see
>   the whole bus, it's only about handling master requests and generating
>   IBIs. Some of the struct, constant and enum definitions could be
>   shared, but most of the I3C slave framework logic will be different

All of these seem ok to me for an initial version. It's already too
big to review properly, so leaving out stuff helps.

> +/**
> + * i3cdev_to_dev() - Returns the device embedded in @i3cdev
> + * @i3cdev: I3C device
> + *
> + * Return: a pointer to a device object.
> + */
> +struct device *i3cdev_to_dev(struct i3c_device *i3cdev)
> +{
> +       return &i3cdev->dev;
> +}
> +EXPORT_SYMBOL_GPL(i3cdev_to_dev);
> +
> +/**
> + * dev_to_i3cdev() - Returns the I3C device containing @dev
> + * @dev: device object
> + *
> + * Return: a pointer to an I3C device object.
> + */
> +struct i3c_device *dev_to_i3cdev(struct device *dev)
> +{
> +       return container_of(dev, struct i3c_device, dev);
> +}
> +EXPORT_SYMBOL_GPL(dev_to_i3cdev);

Many other subsystems just make the device structure available
to all client drivers so this can be an inline operation. Is there
a strong reason to hide it here?

> +static struct i3c_device *
> +i3c_master_alloc_i3c_dev(struct i3c_master_controller *master,
> +                        const struct i3c_device_info *info,
> +                        const struct device_type *devtype)
> +{
> +       struct i3c_device *dev;
> +
> +       dev = kzalloc(sizeof(*dev), GFP_KERNEL);
> +       if (!dev)
> +               return ERR_PTR(-ENOMEM);
> +
> +       dev->common.bus = master->bus;
> +       dev->dev.parent = &master->bus->dev;
> +       dev->dev.type = devtype;
> +       dev->dev.bus = &i3c_bus_type;

This feels a bit odd: so you have bus_type that can contain devices
of three (?) different device types: i3c_device_type, i3c_master_type
and i3c_busdev_type.

Generally speaking, we don't have a lot of subsystems that even
use device_types. I assume that the i3c_device_type for a
device that corresponds to an endpoint on the bus, but I'm
still confused about the other two, and why they are part of
the same bus_type.

Can you describe whether it's possible to have these arbitrarily
mixed, or is there a strict hierarchy such as

host_bus (e.g. platform_device)
    i3c_busdev
          i3c_master
                i3c_device

If that is the actual hierarchy, why isn't it enough to have multiple
masters as children of the platform_device, and then multiple
devices under each of them? Can you also have a platform_device
that controls multiple busdev instances, which each have multiple
masters?

> +/**
> + * i3c_generic_ibi_alloc_pool() - Create a generic IBI pool
> + * @dev: the device this pool will be used for
> + * @req: IBI setup request describing what the device driver expects
> + *
> + * Create a generic IBI pool based on the information provided in @req.
> + *
> + * Return: a valid IBI pool in case of success, an ERR_PTR() otherwise.
> + */
> +struct i3c_generic_ibi_pool *
> +i3c_generic_ibi_alloc_pool(struct i3c_device *dev,
> +                          const struct i3c_ibi_setup *req)
> +{
> +       struct i3c_generic_ibi_pool *pool;
> +       struct i3c_generic_ibi_slot *slot;
> +       unsigned int i;
> +       int ret;
> +
> +       pool = kzalloc(sizeof(*pool), GFP_KERNEL);
> +       if (!pool)
> +               return ERR_PTR(-ENOMEM);
> +
> +       spin_lock_init(&pool->lock);
> +       INIT_LIST_HEAD(&pool->free_slots);
> +       INIT_LIST_HEAD(&pool->pending);
> +
> +       for (i = 0; i < req->num_slots; i++) {
> +               slot = kzalloc(sizeof(*slot), GFP_KERNEL);
> +               if (!slot)
> +                       return ERR_PTR(-ENOMEM);
> +
> +               i3c_master_init_ibi_slot(dev, &slot->base);
> +
> +               if (req->max_payload_len) {
> +                       slot->base.data = kzalloc(req->max_payload_len,
> +                                                 GFP_KERNEL);

You do a lot of allocations here, each with the same GFP_KERNEL
flag. Do the objects have different lifetimes, or could you combine
them into a larger allocation?

Is this called frequently, or only while initializing a device?

> +/**
> + * struct i3c_ccc_mwl - payload passed to SETMWL/GETMWL CCC
> + *
> + * @len: maximum write length in bytes
> + *
> + * The maximum write length is only applicable to SDR private messages or
> + * extended Write CCCs (like SETXTIME).
> + */
> +struct i3c_ccc_mwl {
> +       __be16 len;
> +} __packed;

I would suggest only marking structures as __packed that are not already
naturally packed. Note that a side-effect of __packed is that here
alignof(struct i3c_ccc_mwl) will be '1', and architectures without efficient
unaligned access will have to access the field one byte at a time because
they assume that it may be misaligned.

> +/**
> + * struct i3c_ccc_mrl - payload passed to SETMRL/GETMRL CCC
> + *
> + * @len: maximum read length in bytes
> + * @ibi_len: maximum IBI payload length
> + *
> + * The maximum read length is only applicable to SDR private messages or
> + * extended Read CCCs (like GETXTIME).
> + * The IBI length is only valid if the I3C slave is IBI capable
> + * (%I3C_BCR_IBI_REQ_CAP is set).
> + */
> +struct i3c_ccc_mrl {
> +       __be16 read_len;
> +       u8 ibi_len;
> +} __packed;

This one clearly needs the __packed to get sizeof(struct i3c_ccc_mrl)==3

> +/**
> + * struct i3c_ccc_cmd_payload - CCC payload
> + *
> + * @len: payload length
> + * @data: payload data
> + */
> +struct i3c_ccc_cmd_payload {
> +       u16 len;
> +       void *data;
> +};
> +
> +/**
> + * struct i3c_ccc_cmd_dest - CCC command destination
> + *
> + * @addr: can be an I3C device address or the broadcast address if this is a
> + *       broadcast CCC
> + * @payload: payload to be sent to this device or broadcasted
> + */
> +struct i3c_ccc_cmd_dest {
> +       u8 addr;
> +       struct i3c_ccc_cmd_payload payload;
> +};

There seems to be a lot of padding in this structure: on a 64-bit
machine, you have 11 bytes of data and 13 bytes of padding.
Not sure if that's intentional or important at all.

> +/**
> + * struct i3c_ccc_cmd - CCC command
> + *
> + * @rnw: true if the CCC should retrieve data from the device. Only valid for
> + *      unicast commands
> + * @id: CCC command id
> + * @dests: array of destinations and associated payload for this CCC. Most of
> + *        the time, only one destination is provided
> + * @ndests: number of destinations. Should always be one for broadcast commands
> + */
> +struct i3c_ccc_cmd {
> +       bool rnw;
> +       u8 id;
> +       struct i3c_ccc_cmd_dest *dests;
> +       int ndests;
> +};

Moving the 'ndests' above the pointer will make this structure 16 bytes instead
of 24 on 64-bit architectures.

> +/**
> + * struct i3c_i2c_dev - I3C/I2C common information
> + * @node: node element used to insert the device into the I2C or I3C device
> + *       list
> + * @bus: I3C bus this device is connected to
> + * @master: I3C master that instantiated this device. Will be used to send
> + *         I2C/I3C frames on the bus
> + * @master_priv: master private data assigned to the device. Can be used to
> + *              add master specific information
> + *
> + * This structure is describing common I3C/I2C dev information.
> + */
> +struct i3c_i2c_dev {
> +       struct list_head node;
> +       struct i3c_bus *bus;
> +       struct i3c_master_controller *master;
> +       void *master_priv;
> +};

I find this hard to follow, which means either this has to be complicated
and I just didn't take enough time to think it through, or maybe it can
be simplified.

The 'node' field seems particularly odd, can you explain what it's
for? Normally all children of a bus device can be enumerated by
walking the device model structures. Are you doing this just so
you can walk a single list rather than walking the i3c and i2c
devices separately?

> +/**
> + * struct i3c_bus - I3C bus object
> + * @dev: device to be registered to the device-model
> + * @cur_master: I3C master currently driving the bus. Since I3C is multi-master
> + *             this can change over the time. Will be used to let a master
> + *             know whether it needs to request bus ownership before sending
> + *             a frame or not
> + * @id: bus ID. Assigned by the framework when register the bus
> + * @addrslots: a bitmap with 2-bits per-slot to encode the address status and
> + *            ease the DAA (Dynamic Address Assignment) procedure (see
> + *            &enum i3c_addr_slot_status)
> + * @mode: bus mode (see &enum i3c_bus_mode)
> + * @scl_rate: SCL signal rate for I3C and I2C mode
> + * @devs: 2 lists containing all I3C/I2C devices connected to the bus
> + * @lock: read/write lock on the bus. This is needed to protect against
> + *       operations that have an impact on the whole bus and the devices
> + *       connected to it. For example, when asking slaves to drop their
> + *       dynamic address (RSTDAA CCC), we need to make sure no one is trying
> + *       to send I3C frames to these devices.
> + *       Note that this lock does not protect against concurrency between
> + *       devices: several drivers can send different I3C/I2C frames through
> + *       the same master in parallel. This is the responsibility of the
> + *       master to guarantee that frames are actually sent sequentially and
> + *       not interlaced
> + *
> + * The I3C bus is represented with its own object and not implicitly described
> + * by the I3C master to cope with the multi-master functionality, where one bus
> + * can be shared amongst several masters, each of them requesting bus ownership
> + * when they need to.
> + */
> +struct i3c_bus {
> +       struct device dev;
> +       struct i3c_device *cur_master;
> +       int id;
> +       unsigned long addrslots[((I2C_MAX_ADDR + 1) * 2) / BITS_PER_LONG];
> +       enum i3c_bus_mode mode;
> +       struct {
> +               unsigned long i3c;
> +               unsigned long i2c;
> +       } scl_rate;
> +       struct {
> +               struct list_head i3c;
> +               struct list_head i2c;
> +       } devs;
> +       struct rw_semaphore lock;
> +};

Now here you have two separate lists. How is the i3c list
different from i3c_bus->dev.p->klist_children?

How do you get to the i2c_adapter from an i3c_bus? Does
each master have one?

        Arnd

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 01/10] i3c: Add core I3C infrastructure
  2018-07-11 14:01   ` Arnd Bergmann
@ 2018-07-11 14:41     ` Boris Brezillon
  2018-07-11 15:03       ` Boris Brezillon
  2018-07-11 15:39       ` Arnd Bergmann
  0 siblings, 2 replies; 51+ messages in thread
From: Boris Brezillon @ 2018-07-11 14:41 UTC (permalink / raw)
  To: Arnd Bergmann
  Cc: Wolfram Sang, linux-i2c, Jonathan Corbet,
	open list:DOCUMENTATION, Greg Kroah-Hartman, Przemyslaw Sroka,
	Arkadiusz Golec, Alan Douglas, Bartosz Folta, Damian Kos,
	Alicja Jurasik-Urbaniak, Cyprian Wronka, Suresh Punnoose,
	Rafal Ciepiela, Thomas Petazzoni, Nishanth Menon, Rob Herring,
	Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, DTML,
	Linux Kernel Mailing List, Vitor Soares, Geert Uytterhoeven,
	Linus Walleij, Xiang Lin, linux-gpio

Hi Arnd,

On Wed, 11 Jul 2018 16:01:56 +0200
Arnd Bergmann <arnd@arndb.de> wrote:

> 
> > - the bus element is a separate object and is not implicitly described
> >   by the master (as done in I2C). The reason is that I want to be able
> >   to handle multiple master connected to the same bus and visible to
> >   Linux.
> >   In this situation, we should only have one instance of the device and
> >   not one per master, and sharing the bus object would be part of the
> >   solution to gracefully handle this case.
> >   I'm not sure we will ever need to deal with multiple masters
> >   controlling the same bus and exposed under Linux, but separating the
> >   bus and master concept is pretty easy, hence the decision to do it
> >   like that.
> >   The other benefit of separating the bus and master concepts is that
> >   master devices appear under the bus directory in sysfs.  
> 
> I'm not following here at all, sorry for missing prior discussion if this
> was already explained. What is the "multiple master" case? Do you
> mean multiple devices that are controlled by Linux and that each talk
> to other devices on the same bus, multiple operating systems that
> have talk to are able to own the bus with the kernel being one of
> them, a controller that controls multiple independent buses,
> or something else?

I mean several masters connected to the same bus and all exposed to the
same Linux instance. In this case, the question is, should we have X
I3C buses exposed (X being the number of masters) or should we only
have one?

Having a bus represented as a separate object allows us to switch to
the "one bus : X masters" representation if we need too.


> 
> > +/**
> > + * i3cdev_to_dev() - Returns the device embedded in @i3cdev
> > + * @i3cdev: I3C device
> > + *
> > + * Return: a pointer to a device object.
> > + */
> > +struct device *i3cdev_to_dev(struct i3c_device *i3cdev)
> > +{
> > +       return &i3cdev->dev;
> > +}
> > +EXPORT_SYMBOL_GPL(i3cdev_to_dev);
> > +
> > +/**
> > + * dev_to_i3cdev() - Returns the I3C device containing @dev
> > + * @dev: device object
> > + *
> > + * Return: a pointer to an I3C device object.
> > + */
> > +struct i3c_device *dev_to_i3cdev(struct device *dev)
> > +{
> > +       return container_of(dev, struct i3c_device, dev);
> > +}
> > +EXPORT_SYMBOL_GPL(dev_to_i3cdev);  
> 
> Many other subsystems just make the device structure available
> to all client drivers so this can be an inline operation. Is there
> a strong reason to hide it here?

No, but I think most subsystem do provide dev_to_xxxdev() at least
(to_platform_device() for instance)

> 
> > +static struct i3c_device *
> > +i3c_master_alloc_i3c_dev(struct i3c_master_controller *master,
> > +                        const struct i3c_device_info *info,
> > +                        const struct device_type *devtype)
> > +{
> > +       struct i3c_device *dev;
> > +
> > +       dev = kzalloc(sizeof(*dev), GFP_KERNEL);
> > +       if (!dev)
> > +               return ERR_PTR(-ENOMEM);
> > +
> > +       dev->common.bus = master->bus;
> > +       dev->dev.parent = &master->bus->dev;
> > +       dev->dev.type = devtype;
> > +       dev->dev.bus = &i3c_bus_type;  
> 
> This feels a bit odd: so you have bus_type that can contain devices
> of three (?) different device types: i3c_device_type, i3c_master_type
> and i3c_busdev_type.
> 
> Generally speaking, we don't have a lot of subsystems that even
> use device_types. I assume that the i3c_device_type for a
> device that corresponds to an endpoint on the bus, but I'm
> still confused about the other two, and why they are part of
> the same bus_type.

i3c_busdev is just a virtual device representing the bus itself.
i3c_master is representing the I3C master driving the bus. The reason
for having a different type here is to avoid attaching this device to a
driver but still being able to see the master controller as a device on
the bus. And finally, i3c_device are all remote devices that can be
accessed through a given i3c_master.

This all comes from the design choice I made to represent the bus as a
separate object in order to be able to share it between different
master controllers exposed through the same Linux instance. Since
master controllers are also remote devices for other controllers, we
need to represent them.

> 
> Can you describe whether it's possible to have these arbitrarily
> mixed, or is there a strict hierarchy such as
> 
> host_bus (e.g. platform_device)
>     i3c_busdev
>           i3c_master
>                 i3c_device

It's more:

platdev
	i3c_busdev
		i3c_master
		i3c_device

> 
> If that is the actual hierarchy, why isn't it enough to have multiple
> masters as children of the platform_device, and then multiple
> devices under each of them? Can you also have a platform_device
> that controls multiple busdev instances, which each have multiple
> masters?

Not yet. But at some point, we may have the same i3c_busdev instance
shared by several platdev, each of these platdev having an i3c_master
instance on the bus.

> 
> > +/**
> > + * i3c_generic_ibi_alloc_pool() - Create a generic IBI pool
> > + * @dev: the device this pool will be used for
> > + * @req: IBI setup request describing what the device driver expects
> > + *
> > + * Create a generic IBI pool based on the information provided in @req.
> > + *
> > + * Return: a valid IBI pool in case of success, an ERR_PTR() otherwise.
> > + */
> > +struct i3c_generic_ibi_pool *
> > +i3c_generic_ibi_alloc_pool(struct i3c_device *dev,
> > +                          const struct i3c_ibi_setup *req)
> > +{
> > +       struct i3c_generic_ibi_pool *pool;
> > +       struct i3c_generic_ibi_slot *slot;
> > +       unsigned int i;
> > +       int ret;
> > +
> > +       pool = kzalloc(sizeof(*pool), GFP_KERNEL);
> > +       if (!pool)
> > +               return ERR_PTR(-ENOMEM);
> > +
> > +       spin_lock_init(&pool->lock);
> > +       INIT_LIST_HEAD(&pool->free_slots);
> > +       INIT_LIST_HEAD(&pool->pending);
> > +
> > +       for (i = 0; i < req->num_slots; i++) {
> > +               slot = kzalloc(sizeof(*slot), GFP_KERNEL);
> > +               if (!slot)
> > +                       return ERR_PTR(-ENOMEM);
> > +
> > +               i3c_master_init_ibi_slot(dev, &slot->base);
> > +
> > +               if (req->max_payload_len) {
> > +                       slot->base.data = kzalloc(req->max_payload_len,
> > +                                                 GFP_KERNEL);  
> 
> You do a lot of allocations here, each with the same GFP_KERNEL
> flag. Do the objects have different lifetimes, or could you combine
> them into a larger allocation?

I guess I could pack them to a single kcalloc().

> 
> Is this called frequently, or only while initializing a device?

Only at IBI handler registration time, so normally only when probing an
I3C device.

> 
> > +/**
> > + * struct i3c_ccc_mwl - payload passed to SETMWL/GETMWL CCC
> > + *
> > + * @len: maximum write length in bytes
> > + *
> > + * The maximum write length is only applicable to SDR private messages or
> > + * extended Write CCCs (like SETXTIME).
> > + */
> > +struct i3c_ccc_mwl {
> > +       __be16 len;
> > +} __packed;  
> 
> I would suggest only marking structures as __packed that are not already
> naturally packed. Note that a side-effect of __packed is that here
> alignof(struct i3c_ccc_mwl) will be '1', and architectures without efficient
> unaligned access will have to access the field one byte at a time because
> they assume that it may be misaligned.

These are structure used to create packets to be sent on the wire.
Making sure that everything is packed correctly is important, so I'm
not sure I can remove the __packed everywhere.

> 
> > +/**
> > + * struct i3c_ccc_mrl - payload passed to SETMRL/GETMRL CCC
> > + *
> > + * @len: maximum read length in bytes
> > + * @ibi_len: maximum IBI payload length
> > + *
> > + * The maximum read length is only applicable to SDR private messages or
> > + * extended Read CCCs (like GETXTIME).
> > + * The IBI length is only valid if the I3C slave is IBI capable
> > + * (%I3C_BCR_IBI_REQ_CAP is set).
> > + */
> > +struct i3c_ccc_mrl {
> > +       __be16 read_len;
> > +       u8 ibi_len;
> > +} __packed;  
> 
> This one clearly needs the __packed to get sizeof(struct i3c_ccc_mrl)==3

Yep, that's what I meant.

> 
> > +/**
> > + * struct i3c_ccc_cmd_payload - CCC payload
> > + *
> > + * @len: payload length
> > + * @data: payload data
> > + */
> > +struct i3c_ccc_cmd_payload {
> > +       u16 len;
> > +       void *data;
> > +};
> > +
> > +/**
> > + * struct i3c_ccc_cmd_dest - CCC command destination
> > + *
> > + * @addr: can be an I3C device address or the broadcast address if this is a
> > + *       broadcast CCC
> > + * @payload: payload to be sent to this device or broadcasted
> > + */
> > +struct i3c_ccc_cmd_dest {
> > +       u8 addr;
> > +       struct i3c_ccc_cmd_payload payload;
> > +};  
> 
> There seems to be a lot of padding in this structure: on a 64-bit
> machine, you have 11 bytes of data and 13 bytes of padding.
> Not sure if that's intentional or important at all.

I don't think that a big issue.

> 
> > +/**
> > + * struct i3c_ccc_cmd - CCC command
> > + *
> > + * @rnw: true if the CCC should retrieve data from the device. Only valid for
> > + *      unicast commands
> > + * @id: CCC command id
> > + * @dests: array of destinations and associated payload for this CCC. Most of
> > + *        the time, only one destination is provided
> > + * @ndests: number of destinations. Should always be one for broadcast commands
> > + */
> > +struct i3c_ccc_cmd {
> > +       bool rnw;
> > +       u8 id;
> > +       struct i3c_ccc_cmd_dest *dests;
> > +       int ndests;
> > +};  
> 
> Moving the 'ndests' above the pointer will make this structure 16 bytes instead
> of 24 on 64-bit architectures.

Okay. Will do.

> 
> > +/**
> > + * struct i3c_i2c_dev - I3C/I2C common information
> > + * @node: node element used to insert the device into the I2C or I3C device
> > + *       list
> > + * @bus: I3C bus this device is connected to
> > + * @master: I3C master that instantiated this device. Will be used to send
> > + *         I2C/I3C frames on the bus
> > + * @master_priv: master private data assigned to the device. Can be used to
> > + *              add master specific information
> > + *
> > + * This structure is describing common I3C/I2C dev information.
> > + */
> > +struct i3c_i2c_dev {
> > +       struct list_head node;
> > +       struct i3c_bus *bus;
> > +       struct i3c_master_controller *master;
> > +       void *master_priv;
> > +};  
> 
> I find this hard to follow, which means either this has to be complicated
> and I just didn't take enough time to think it through, or maybe it can
> be simplified.
> 
> The 'node' field seems particularly odd, can you explain what it's
> for? Normally all children of a bus device can be enumerated by
> walking the device model structures. Are you doing this just so
> you can walk a single list rather than walking the i3c and i2c
> devices separately?

The devices discovered on the bus are not directly registered to the
device model, and I need to store them in a list to do some operations
before exposing them. Once everything is ready to be used, I then
iterate the list and register all not-yet-registered I3C devs.

> 
> > +/**
> > + * struct i3c_bus - I3C bus object
> > + * @dev: device to be registered to the device-model
> > + * @cur_master: I3C master currently driving the bus. Since I3C is multi-master
> > + *             this can change over the time. Will be used to let a master
> > + *             know whether it needs to request bus ownership before sending
> > + *             a frame or not
> > + * @id: bus ID. Assigned by the framework when register the bus
> > + * @addrslots: a bitmap with 2-bits per-slot to encode the address status and
> > + *            ease the DAA (Dynamic Address Assignment) procedure (see
> > + *            &enum i3c_addr_slot_status)
> > + * @mode: bus mode (see &enum i3c_bus_mode)
> > + * @scl_rate: SCL signal rate for I3C and I2C mode
> > + * @devs: 2 lists containing all I3C/I2C devices connected to the bus
> > + * @lock: read/write lock on the bus. This is needed to protect against
> > + *       operations that have an impact on the whole bus and the devices
> > + *       connected to it. For example, when asking slaves to drop their
> > + *       dynamic address (RSTDAA CCC), we need to make sure no one is trying
> > + *       to send I3C frames to these devices.
> > + *       Note that this lock does not protect against concurrency between
> > + *       devices: several drivers can send different I3C/I2C frames through
> > + *       the same master in parallel. This is the responsibility of the
> > + *       master to guarantee that frames are actually sent sequentially and
> > + *       not interlaced
> > + *
> > + * The I3C bus is represented with its own object and not implicitly described
> > + * by the I3C master to cope with the multi-master functionality, where one bus
> > + * can be shared amongst several masters, each of them requesting bus ownership
> > + * when they need to.
> > + */
> > +struct i3c_bus {
> > +       struct device dev;
> > +       struct i3c_device *cur_master;
> > +       int id;
> > +       unsigned long addrslots[((I2C_MAX_ADDR + 1) * 2) / BITS_PER_LONG];
> > +       enum i3c_bus_mode mode;
> > +       struct {
> > +               unsigned long i3c;
> > +               unsigned long i2c;
> > +       } scl_rate;
> > +       struct {
> > +               struct list_head i3c;
> > +               struct list_head i2c;
> > +       } devs;
> > +       struct rw_semaphore lock;
> > +};  
> 
> Now here you have two separate lists. How is the i3c list
> different from i3c_bus->dev.p->klist_children?

As said above, the I3C devs are not registered right away. We need to
make sure the controller is configured properly before exposing them to
the device model.

> 
> How do you get to the i2c_adapter from an i3c_bus? Does
> each master have one?

Each master has an i2c_adapter, and I need an internal wrapper to keep
track of I3C-bus-only information attached to an I2C device (like LVR).
Yet another reason to have a separate list of I2C devices. The other
reason being that I2C devices need to be attached to the I3C master
controller before being exposed to the I2C framework, and more
importantly, the I3C master controller needs to know about all I2C
devices connected on the bus, at bus initialization time (so before the
bus becomes active).

I hope my explanations are clear enough. Don't hesitate to tell me if
that's not the case, and thanks a lot for taking the time to review
this patchset.

Regards,

Boris

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 01/10] i3c: Add core I3C infrastructure
  2018-07-11 14:41     ` Boris Brezillon
@ 2018-07-11 15:03       ` Boris Brezillon
  2018-07-11 15:39       ` Arnd Bergmann
  1 sibling, 0 replies; 51+ messages in thread
From: Boris Brezillon @ 2018-07-11 15:03 UTC (permalink / raw)
  To: Arnd Bergmann
  Cc: Wolfram Sang, linux-i2c, Jonathan Corbet,
	open list:DOCUMENTATION, Greg Kroah-Hartman, Przemyslaw Sroka,
	Arkadiusz Golec, Alan Douglas, Bartosz Folta, Damian Kos,
	Alicja Jurasik-Urbaniak, Cyprian Wronka, Suresh Punnoose,
	Rafal Ciepiela, Thomas Petazzoni, Nishanth Menon, Rob Herring,
	Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, DTML,
	Linux Kernel Mailing List, Vitor Soares, Geert Uytterhoeven,
	Linus Walleij, Xiang Lin, linux-gpio

On Wed, 11 Jul 2018 16:41:20 +0200
Boris Brezillon <boris.brezillon@bootlin.com> wrote:

> > > +/**
> > > + * i3cdev_to_dev() - Returns the device embedded in @i3cdev
> > > + * @i3cdev: I3C device
> > > + *
> > > + * Return: a pointer to a device object.
> > > + */
> > > +struct device *i3cdev_to_dev(struct i3c_device *i3cdev)
> > > +{
> > > +       return &i3cdev->dev;
> > > +}
> > > +EXPORT_SYMBOL_GPL(i3cdev_to_dev);
> > > +
> > > +/**
> > > + * dev_to_i3cdev() - Returns the I3C device containing @dev
> > > + * @dev: device object
> > > + *
> > > + * Return: a pointer to an I3C device object.
> > > + */
> > > +struct i3c_device *dev_to_i3cdev(struct device *dev)
> > > +{
> > > +       return container_of(dev, struct i3c_device, dev);
> > > +}
> > > +EXPORT_SYMBOL_GPL(dev_to_i3cdev);    
> > 
> > Many other subsystems just make the device structure available
> > to all client drivers so this can be an inline operation. Is there
> > a strong reason to hide it here?  
> 
> No, but I think most subsystem do provide dev_to_xxxdev() at least
> (to_platform_device() for instance)
> 

My bad. I misunderstood you question. The main reason I did that was
because I didn't want to expose i3c_device internals to the I3C device
drivers. Anyway, this part will be reworked in my v6 to address one
problem we had when re-attaching a pre-existing device that had lost
its dynamic address and acquired a new one.
Since we want that operation to be transparent to I3C device drivers, I
had to decouple the I3C device driver representation from the I3C master
controller one. I thus end up with struct i3C_dev_desc on the controller
API side, and struct i3c_device on the driver side with a link between
the 2 object that can be updated at runtime. And as you can imagine,
i3c_device does not contain a lot of information now.

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 01/10] i3c: Add core I3C infrastructure
  2018-07-11 14:41     ` Boris Brezillon
  2018-07-11 15:03       ` Boris Brezillon
@ 2018-07-11 15:39       ` Arnd Bergmann
  2018-07-11 17:12         ` Boris Brezillon
  1 sibling, 1 reply; 51+ messages in thread
From: Arnd Bergmann @ 2018-07-11 15:39 UTC (permalink / raw)
  To: Boris Brezillon
  Cc: Wolfram Sang, linux-i2c, Jonathan Corbet,
	open list:DOCUMENTATION, Greg Kroah-Hartman, Przemyslaw Sroka,
	Arkadiusz Golec, Alan Douglas, Bartosz Folta, Damian Kos,
	Alicja Jurasik-Urbaniak, Cyprian Wronka, Suresh Punnoose,
	Rafal Ciepiela, Thomas Petazzoni, Nishanth Menon, Rob Herring,
	Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, DTML,
	Linux Kernel Mailing List, Vitor Soares, Geert Uytterhoeven,
	Linus Walleij, Xiang Lin, linux-gpio

On Wed, Jul 11, 2018 at 4:41 PM, Boris Brezillon
<boris.brezillon@bootlin.com> wrote:
> On Wed, 11 Jul 2018 16:01:56 +0200 Arnd Bergmann <arnd@arndb.de> wrote:
>> > - the bus element is a separate object and is not implicitly described
>> >   by the master (as done in I2C). The reason is that I want to be able
>> >   to handle multiple master connected to the same bus and visible to
>> >   Linux.
>> >   In this situation, we should only have one instance of the device and
>> >   not one per master, and sharing the bus object would be part of the
>> >   solution to gracefully handle this case.
>> >   I'm not sure we will ever need to deal with multiple masters
>> >   controlling the same bus and exposed under Linux, but separating the
>> >   bus and master concept is pretty easy, hence the decision to do it
>> >   like that.
>> >   The other benefit of separating the bus and master concepts is that
>> >   master devices appear under the bus directory in sysfs.
>>
>> I'm not following here at all, sorry for missing prior discussion if this
>> was already explained. What is the "multiple master" case? Do you
>> mean multiple devices that are controlled by Linux and that each talk
>> to other devices on the same bus, multiple operating systems that
>> have talk to are able to own the bus with the kernel being one of
>> them, a controller that controls multiple independent buses,
>> or something else?
>
> I mean several masters connected to the same bus and all exposed to the
> same Linux instance. In this case, the question is, should we have X
> I3C buses exposed (X being the number of masters) or should we only
> have one?
>
> Having a bus represented as a separate object allows us to switch to
> the "one bus : X masters" representation if we need too.
...
>>
>> This feels a bit odd: so you have bus_type that can contain devices
>> of three (?) different device types: i3c_device_type, i3c_master_type
>> and i3c_busdev_type.
>>
>> Generally speaking, we don't have a lot of subsystems that even
>> use device_types. I assume that the i3c_device_type for a
>> device that corresponds to an endpoint on the bus, but I'm
>> still confused about the other two, and why they are part of
>> the same bus_type.
>
> i3c_busdev is just a virtual device representing the bus itself.
> i3c_master is representing the I3C master driving the bus. The reason
> for having a different type here is to avoid attaching this device to a
> driver but still being able to see the master controller as a device on
> the bus. And finally, i3c_device are all remote devices that can be
> accessed through a given i3c_master.
>
> This all comes from the design choice I made to represent the bus as a
> separate object in order to be able to share it between different
> master controllers exposed through the same Linux instance. Since
> master controllers are also remote devices for other controllers, we
> need to represent them.

Ok, so I think this is the most important question to resolve: do we
actually need to control multiple masters on a single bus from one OS
or not?

The problem that I see is that it breaks the tree abstraction that
we use in the dtb interface, in the driver model and in sysfs.
If we need to deal with a hardware bus structure like

              cpu
             /   \
            /     \
       platdev   platdev
           |        |
     i3c-master   i3c-master
            \      /
             \    /
            i3c-bus
             /    \
         device   device

then that abstraction no longer holds. Clearly you could build
a system like that, and if we have to support it, the i3c infrastructure
should be prepared for it, since we wouldn't be able to retrofit
it later.

What would be the point of building such a system though?
Is this for performance, failover, or something else?
IOW, what feature would we lose if we were to declare that
setup above invalid (and ensure you cannot represent it in DT)?

>> > +/**
>> > + * struct i3c_ccc_mwl - payload passed to SETMWL/GETMWL CCC
>> > + *
>> > + * @len: maximum write length in bytes
>> > + *
>> > + * The maximum write length is only applicable to SDR private messages or
>> > + * extended Write CCCs (like SETXTIME).
>> > + */
>> > +struct i3c_ccc_mwl {
>> > +       __be16 len;
>> > +} __packed;
>>
>> I would suggest only marking structures as __packed that are not already
>> naturally packed. Note that a side-effect of __packed is that here
>> alignof(struct i3c_ccc_mwl) will be '1', and architectures without efficient
>> unaligned access will have to access the field one byte at a time because
>> they assume that it may be misaligned.
>
> These are structure used to create packets to be sent on the wire.
> Making sure that everything is packed correctly is important, so I'm
> not sure I can remove the __packed everywhere.

I mean just the ones for which the __packed attribute only changes
the alignment of the outer structure but not the layout inside of the
structure. Alternatively, set both __packed and __aligned().

>> > +/**
>> > + * struct i3c_i2c_dev - I3C/I2C common information
>> > + * @node: node element used to insert the device into the I2C or I3C device
>> > + *       list
>> > + * @bus: I3C bus this device is connected to
>> > + * @master: I3C master that instantiated this device. Will be used to send
>> > + *         I2C/I3C frames on the bus
>> > + * @master_priv: master private data assigned to the device. Can be used to
>> > + *              add master specific information
>> > + *
>> > + * This structure is describing common I3C/I2C dev information.
>> > + */
>> > +struct i3c_i2c_dev {
>> > +       struct list_head node;
>> > +       struct i3c_bus *bus;
>> > +       struct i3c_master_controller *master;
>> > +       void *master_priv;
>> > +};
>>
>> I find this hard to follow, which means either this has to be complicated
>> and I just didn't take enough time to think it through, or maybe it can
>> be simplified.
>>
>> The 'node' field seems particularly odd, can you explain what it's
>> for? Normally all children of a bus device can be enumerated by
>> walking the device model structures. Are you doing this just so
>> you can walk a single list rather than walking the i3c and i2c
>> devices separately?
>
> The devices discovered on the bus are not directly registered to the
> device model, and I need to store them in a list to do some operations
> before exposing them. Once everything is ready to be used, I then
> iterate the list and register all not-yet-registered I3C devs.

Can you explain what those operations are and why we can't
register everything directly? This seems rather unconventional,
so I want to make sure it's done for a good reason.

      Arnd

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 01/10] i3c: Add core I3C infrastructure
  2018-07-11 15:39       ` Arnd Bergmann
@ 2018-07-11 17:12         ` Boris Brezillon
  2018-07-11 20:10           ` Arnd Bergmann
  2018-07-12  4:41           ` Peter Rosin
  0 siblings, 2 replies; 51+ messages in thread
From: Boris Brezillon @ 2018-07-11 17:12 UTC (permalink / raw)
  To: Arnd Bergmann
  Cc: Wolfram Sang, linux-i2c, Jonathan Corbet,
	open list:DOCUMENTATION, Greg Kroah-Hartman, Przemyslaw Sroka,
	Arkadiusz Golec, Alan Douglas, Bartosz Folta, Damian Kos,
	Alicja Jurasik-Urbaniak, Cyprian Wronka, Suresh Punnoose,
	Rafal Ciepiela, Thomas Petazzoni, Nishanth Menon, Rob Herring,
	Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, DTML,
	Linux Kernel Mailing List, Vitor Soares, Geert Uytterhoeven,
	Linus Walleij, Xiang Lin, linux-gpio

On Wed, 11 Jul 2018 17:39:56 +0200
Arnd Bergmann <arnd@arndb.de> wrote:

> On Wed, Jul 11, 2018 at 4:41 PM, Boris Brezillon
> <boris.brezillon@bootlin.com> wrote:
> > On Wed, 11 Jul 2018 16:01:56 +0200 Arnd Bergmann <arnd@arndb.de> wrote:  
> >> > - the bus element is a separate object and is not implicitly described
> >> >   by the master (as done in I2C). The reason is that I want to be able
> >> >   to handle multiple master connected to the same bus and visible to
> >> >   Linux.
> >> >   In this situation, we should only have one instance of the device and
> >> >   not one per master, and sharing the bus object would be part of the
> >> >   solution to gracefully handle this case.
> >> >   I'm not sure we will ever need to deal with multiple masters
> >> >   controlling the same bus and exposed under Linux, but separating the
> >> >   bus and master concept is pretty easy, hence the decision to do it
> >> >   like that.
> >> >   The other benefit of separating the bus and master concepts is that
> >> >   master devices appear under the bus directory in sysfs.  
> >>
> >> I'm not following here at all, sorry for missing prior discussion if this
> >> was already explained. What is the "multiple master" case? Do you
> >> mean multiple devices that are controlled by Linux and that each talk
> >> to other devices on the same bus, multiple operating systems that
> >> have talk to are able to own the bus with the kernel being one of
> >> them, a controller that controls multiple independent buses,
> >> or something else?  
> >
> > I mean several masters connected to the same bus and all exposed to the
> > same Linux instance. In this case, the question is, should we have X
> > I3C buses exposed (X being the number of masters) or should we only
> > have one?
> >
> > Having a bus represented as a separate object allows us to switch to
> > the "one bus : X masters" representation if we need too.  
> ...
> >>
> >> This feels a bit odd: so you have bus_type that can contain devices
> >> of three (?) different device types: i3c_device_type, i3c_master_type
> >> and i3c_busdev_type.
> >>
> >> Generally speaking, we don't have a lot of subsystems that even
> >> use device_types. I assume that the i3c_device_type for a
> >> device that corresponds to an endpoint on the bus, but I'm
> >> still confused about the other two, and why they are part of
> >> the same bus_type.  
> >
> > i3c_busdev is just a virtual device representing the bus itself.
> > i3c_master is representing the I3C master driving the bus. The reason
> > for having a different type here is to avoid attaching this device to a
> > driver but still being able to see the master controller as a device on
> > the bus. And finally, i3c_device are all remote devices that can be
> > accessed through a given i3c_master.
> >
> > This all comes from the design choice I made to represent the bus as a
> > separate object in order to be able to share it between different
> > master controllers exposed through the same Linux instance. Since
> > master controllers are also remote devices for other controllers, we
> > need to represent them.  
> 
> Ok, so I think this is the most important question to resolve: do we
> actually need to control multiple masters on a single bus from one OS
> or not?
> 
> The problem that I see is that it breaks the tree abstraction that
> we use in the dtb interface, in the driver model and in sysfs.
> If we need to deal with a hardware bus structure like
> 
>               cpu
>              /   \
>             /     \
>        platdev   platdev
>            |        |
>      i3c-master   i3c-master
>             \      /
>              \    /
>             i3c-bus
>              /    \
>          device   device
> 
> then that abstraction no longer holds. Clearly you could build
> a system like that, and if we have to support it, the i3c infrastructure
> should be prepared for it, since we wouldn't be able to retrofit
> it later.

Exactly. For the DT representation I thought we could have the primary
master hold the device nodes, and then have secondary masters reference
the main master with a phandle (i3c-bus = <&main_i3c_master>;). For the
sysfs representation, it would be the same. Only one of the master
would create the i3c_bus object and the other masters would just
reference it.

> 
> What would be the point of building such a system though?

This, I don't know. But as you said, if we go for a "one bus per
master" representation, going back will be difficult.

> Is this for performance, failover, or something else?

No, I don't think so, especially since the mastership handover
operation is not free. So keeping the same master in control is
probably better in term of perfs.

One case I can think of is when the primary master does not have enough
resources to address all devices on the bus, and let the secondary
master handle all transactions targeting those devices.

> IOW, what feature would we lose if we were to declare that
> setup above invalid (and ensure you cannot represent it in DT)?

That's exactly the sort of discussion I wanted to trigger. Maybe we
shouldn't care and expose this use case as if it was X different I3C
buses (with all devices present on the bus being exposed X times to the
system).

> 
> >> > +/**
> >> > + * struct i3c_ccc_mwl - payload passed to SETMWL/GETMWL CCC
> >> > + *
> >> > + * @len: maximum write length in bytes
> >> > + *
> >> > + * The maximum write length is only applicable to SDR private messages or
> >> > + * extended Write CCCs (like SETXTIME).
> >> > + */
> >> > +struct i3c_ccc_mwl {
> >> > +       __be16 len;
> >> > +} __packed;  
> >>
> >> I would suggest only marking structures as __packed that are not already
> >> naturally packed. Note that a side-effect of __packed is that here
> >> alignof(struct i3c_ccc_mwl) will be '1', and architectures without efficient
> >> unaligned access will have to access the field one byte at a time because
> >> they assume that it may be misaligned.  
> >
> > These are structure used to create packets to be sent on the wire.
> > Making sure that everything is packed correctly is important, so I'm
> > not sure I can remove the __packed everywhere.  
> 
> I mean just the ones for which the __packed attribute only changes
> the alignment of the outer structure but not the layout inside of the
> structure. Alternatively, set both __packed and __aligned().

Ok.

> 
> >> > +/**
> >> > + * struct i3c_i2c_dev - I3C/I2C common information
> >> > + * @node: node element used to insert the device into the I2C or I3C device
> >> > + *       list
> >> > + * @bus: I3C bus this device is connected to
> >> > + * @master: I3C master that instantiated this device. Will be used to send
> >> > + *         I2C/I3C frames on the bus
> >> > + * @master_priv: master private data assigned to the device. Can be used to
> >> > + *              add master specific information
> >> > + *
> >> > + * This structure is describing common I3C/I2C dev information.
> >> > + */
> >> > +struct i3c_i2c_dev {
> >> > +       struct list_head node;
> >> > +       struct i3c_bus *bus;
> >> > +       struct i3c_master_controller *master;
> >> > +       void *master_priv;
> >> > +};  
> >>
> >> I find this hard to follow, which means either this has to be complicated
> >> and I just didn't take enough time to think it through, or maybe it can
> >> be simplified.
> >>
> >> The 'node' field seems particularly odd, can you explain what it's
> >> for? Normally all children of a bus device can be enumerated by
> >> walking the device model structures. Are you doing this just so
> >> you can walk a single list rather than walking the i3c and i2c
> >> devices separately?  
> >
> > The devices discovered on the bus are not directly registered to the
> > device model, and I need to store them in a list to do some operations
> > before exposing them. Once everything is ready to be used, I then
> > iterate the list and register all not-yet-registered I3C devs.  
> 
> Can you explain what those operations are and why we can't
> register everything directly? This seems rather unconventional,
> so I want to make sure it's done for a good reason.

When we start a DAA operation (used to discover all devices on the
bus), we have the bus lock held in maintenance mode (AKA exclusive
mode). During this DAA the controller will add all the devices it has
discovered on the bus and let the core query information about those
devices (PID, DCR, HDR capabilies, SDR speed limitations, ...). It
might also happen that a device that had been discovered previously is
re-discovered because it had lost its dynamic address (i.e. when
the device had been reset but not by Linux). In this case the I3C
framework does not expose a new device but instead updates the dynamic
address of the device already registered to the device model, so that
new transactions initiated by the I3C device driver work correctly.
This is the very reason we hold the lock in exclusive mode (we want all
transactions to be stopped until we have updated dynamic addresses if
needed).

Now, let's imagine you register the device when the bus lock is held in
exclusive mode, and the ->probe() function of the I3C driver needs to
do an I3C transfer => you end up with a deadlock.

So what we do instead is add new devices to the i3c bus list, release
the bus lock and then register all new devices.

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 01/10] i3c: Add core I3C infrastructure
  2018-07-11 17:12         ` Boris Brezillon
@ 2018-07-11 20:10           ` Arnd Bergmann
  2018-07-11 22:09             ` Boris Brezillon
  2018-07-12  4:41           ` Peter Rosin
  1 sibling, 1 reply; 51+ messages in thread
From: Arnd Bergmann @ 2018-07-11 20:10 UTC (permalink / raw)
  To: Boris Brezillon
  Cc: Wolfram Sang, linux-i2c, Jonathan Corbet,
	open list:DOCUMENTATION, Greg Kroah-Hartman, Przemyslaw Sroka,
	Arkadiusz Golec, Alan Douglas, Bartosz Folta, Damian Kos,
	Alicja Jurasik-Urbaniak, Cyprian Wronka, Suresh Punnoose,
	Rafal Ciepiela, Thomas Petazzoni, Nishanth Menon, Rob Herring,
	Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, DTML,
	Linux Kernel Mailing List, Vitor Soares, Geert Uytterhoeven,
	Linus Walleij, Xiang Lin, linux-gpio

n Wed, Jul 11, 2018 at 7:12 PM, Boris Brezillon
<boris.brezillon@bootlin.com> wrote:
> On Wed, 11 Jul 2018 17:39:56 +0200 Arnd Bergmann <arnd@arndb.de> wrote:
>> On Wed, Jul 11, 2018 at 4:41 PM, Boris Brezillon <boris.brezillon@bootlin.com> wrote:
>>
>> The problem that I see is that it breaks the tree abstraction that
>> we use in the dtb interface, in the driver model and in sysfs.
>> If we need to deal with a hardware bus structure like
>>
>>               cpu
>>              /   \
>>             /     \
>>        platdev   platdev
>>            |        |
>>      i3c-master   i3c-master
>>             \      /
>>              \    /
>>             i3c-bus
>>              /    \
>>          device   device
>>
>> then that abstraction no longer holds. Clearly you could build
>> a system like that, and if we have to support it, the i3c infrastructure
>> should be prepared for it, since we wouldn't be able to retrofit
>> it later.
>
> Exactly. For the DT representation I thought we could have the primary
> master hold the device nodes, and then have secondary masters reference
> the main master with a phandle (i3c-bus = <&main_i3c_master>;). For the
> sysfs representation, it would be the same. Only one of the master
> would create the i3c_bus object and the other masters would just
> reference it.

Ok.

>> What would be the point of building such a system though?
>
> This, I don't know. But as you said, if we go for a "one bus per
> master" representation, going back will be difficult.
>
>> Is this for performance, failover, or something else?
>
> No, I don't think so, especially since the mastership handover
> operation is not free. So keeping the same master in control is
> probably better in term of perfs.

Right.

> One case I can think of is when the primary master does not have enough
> resources to address all devices on the bus, and let the secondary
> master handle all transactions targeting those devices.
>


I've read the specification a bit more, and from what I found there,
it seems extremely unlikely that there was an intended use case where
one OS instance would control more than one master on a single bus
and flip them between primary and secondary mode.

In particular, the protocol for the handover is defined in a way that
intentionally avoids requiring a side channel to communicate data
about the slave devices, and instead the secondary master(s) get
informed about any changes of the topology as they happen
through explicit messages.

The description of the secondary master labels the introduction section
of says

     "I3C Smart Sensor(s) / Hub(s) / Engine(s)"

which sounds like some microcontroller that can act as a master of
some sort, rather than being part of the OS itself.

I can see several use cases for this, e.g.

* A baseboard management controller booting first, reading all
  the sensors and possibly loading its own OS from an i3c flash
  before handing off control to the main CPU of a server and
  no longer being a master

* A fan controller that occasionally wants to read temperature
  sensors and control fan speed, while normally being a
  secondary master. It periodically asks the OS to become
  a master to read the sensors and then immediately hands back
  control to the host OS as the master

* Two controllers inside of the same SoC, but one of them owned
  by ARM Trustzone firmware or the Intel equivalent, the other
  owned by the OS, both accessing the same slaves.

All of these require implementing handover between primary
and secondary master, but Linux would still see a hierarchical
bus structure, with the secondary masters looking like slave
devices that might request being masters during some time.

We may also run into the requirement that a master we probe
is currently the secondary master and has to probe the bus
by asking the current master for the available devices, and
then taking over.

>> IOW, what feature would we lose if we were to declare that
>> setup above invalid (and ensure you cannot represent it in DT)?
>
> That's exactly the sort of discussion I wanted to trigger. Maybe we
> shouldn't care and expose this use case as if it was X different I3C
> buses (with all devices present on the bus being exposed X times
> to the system).

That's probably fine for many slave devices (you could read a
single sensor multiple times if you iterate through all i2c sensors
on all buses) but might not work for others (a slave device sending
an interrupt to the current master for a request that was started
from the previous master).
My impression however is that this is actually a corner case that
we can leave to be undefined, and not prepare to handle well,
as long as we can deal with the interesting examples above.

>> > The devices discovered on the bus are not directly registered to the
>> > device model, and I need to store them in a list to do some operations
>> > before exposing them. Once everything is ready to be used, I then
>> > iterate the list and register all not-yet-registered I3C devs.
>>
>> Can you explain what those operations are and why we can't
>> register everything directly? This seems rather unconventional,
>> so I want to make sure it's done for a good reason.
>
> When we start a DAA operation (used to discover all devices on the
> bus), we have the bus lock held in maintenance mode (AKA exclusive
> mode). During this DAA the controller will add all the devices it has
> discovered on the bus and let the core query information about those
> devices (PID, DCR, HDR capabilies, SDR speed limitations, ...). It
> might also happen that a device that had been discovered previously is
> re-discovered because it had lost its dynamic address (i.e. when
> the device had been reset but not by Linux). In this case the I3C
> framework does not expose a new device but instead updates the dynamic
> address of the device already registered to the device model, so that
> new transactions initiated by the I3C device driver work correctly.
> This is the very reason we hold the lock in exclusive mode (we want all
> transactions to be stopped until we have updated dynamic addresses if
> needed).
>
> Now, let's imagine you register the device when the bus lock is held in
> exclusive mode, and the ->probe() function of the I3C driver needs to
> do an I3C transfer => you end up with a deadlock.
>
> So what we do instead is add new devices to the i3c bus list, release
> the bus lock and then register all new devices.

Ok, but maybe you could you put the information about those devices
on a local list on the stack rather than the controller? I suppose this
would not change the logic much, but it would slightly simplify the
data structures for the bus and stop others from wondering about
them. ;-)
This is a really minor point though, let's work out the problem of the
multiple masters first.

      Arnd

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 01/10] i3c: Add core I3C infrastructure
  2018-07-11 20:10           ` Arnd Bergmann
@ 2018-07-11 22:09             ` Boris Brezillon
  2018-07-12  8:21               ` Arnd Bergmann
  0 siblings, 1 reply; 51+ messages in thread
From: Boris Brezillon @ 2018-07-11 22:09 UTC (permalink / raw)
  To: Arnd Bergmann
  Cc: Wolfram Sang, linux-i2c, Jonathan Corbet,
	open list:DOCUMENTATION, Greg Kroah-Hartman, Przemyslaw Sroka,
	Arkadiusz Golec, Alan Douglas, Bartosz Folta, Damian Kos,
	Alicja Jurasik-Urbaniak, Cyprian Wronka, Suresh Punnoose,
	Rafal Ciepiela, Thomas Petazzoni, Nishanth Menon, Rob Herring,
	Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, DTML,
	Linux Kernel Mailing List, Vitor Soares, Geert Uytterhoeven,
	Linus Walleij, Xiang Lin, linux-gpio

On Wed, 11 Jul 2018 22:10:26 +0200
Arnd Bergmann <arnd@arndb.de> wrote:

> n Wed, Jul 11, 2018 at 7:12 PM, Boris Brezillon
> <boris.brezillon@bootlin.com> wrote:
> > On Wed, 11 Jul 2018 17:39:56 +0200 Arnd Bergmann <arnd@arndb.de> wrote:  
> >> On Wed, Jul 11, 2018 at 4:41 PM, Boris Brezillon <boris.brezillon@bootlin.com> wrote:
> >>
> >> The problem that I see is that it breaks the tree abstraction that
> >> we use in the dtb interface, in the driver model and in sysfs.
> >> If we need to deal with a hardware bus structure like
> >>
> >>               cpu
> >>              /   \
> >>             /     \
> >>        platdev   platdev
> >>            |        |
> >>      i3c-master   i3c-master
> >>             \      /
> >>              \    /
> >>             i3c-bus
> >>              /    \
> >>          device   device
> >>
> >> then that abstraction no longer holds. Clearly you could build
> >> a system like that, and if we have to support it, the i3c infrastructure
> >> should be prepared for it, since we wouldn't be able to retrofit
> >> it later.  
> >
> > Exactly. For the DT representation I thought we could have the primary
> > master hold the device nodes, and then have secondary masters reference
> > the main master with a phandle (i3c-bus = <&main_i3c_master>;). For the
> > sysfs representation, it would be the same. Only one of the master
> > would create the i3c_bus object and the other masters would just
> > reference it.  
> 
> Ok.
> 
> >> What would be the point of building such a system though?  
> >
> > This, I don't know. But as you said, if we go for a "one bus per
> > master" representation, going back will be difficult.
> >  
> >> Is this for performance, failover, or something else?  
> >
> > No, I don't think so, especially since the mastership handover
> > operation is not free. So keeping the same master in control is
> > probably better in term of perfs.  
> 
> Right.
> 
> > One case I can think of is when the primary master does not have enough
> > resources to address all devices on the bus, and let the secondary
> > master handle all transactions targeting those devices.
> >  
> 
> 
> I've read the specification a bit more, and from what I found there,
> it seems extremely unlikely that there was an intended use case where
> one OS instance would control more than one master on a single bus
> and flip them between primary and secondary mode.
> 
> In particular, the protocol for the handover is defined in a way that
> intentionally avoids requiring a side channel to communicate data
> about the slave devices, and instead the secondary master(s) get
> informed about any changes of the topology as they happen
> through explicit messages.
> 
> The description of the secondary master labels the introduction section
> of says
> 
>      "I3C Smart Sensor(s) / Hub(s) / Engine(s)"
> 
> which sounds like some microcontroller that can act as a master of
> some sort, rather than being part of the OS itself.
> 
> I can see several use cases for this, e.g.
> 
> * A baseboard management controller booting first, reading all
>   the sensors and possibly loading its own OS from an i3c flash
>   before handing off control to the main CPU of a server and
>   no longer being a master
> 
> * A fan controller that occasionally wants to read temperature
>   sensors and control fan speed, while normally being a
>   secondary master. It periodically asks the OS to become
>   a master to read the sensors and then immediately hands back
>   control to the host OS as the master
> 
> * Two controllers inside of the same SoC, but one of them owned
>   by ARM Trustzone firmware or the Intel equivalent, the other
>   owned by the OS, both accessing the same slaves.
> 
> All of these require implementing handover between primary
> and secondary master, but Linux would still see a hierarchical
> bus structure, with the secondary masters looking like slave
> devices that might request being masters during some time.
> 
> We may also run into the requirement that a master we probe
> is currently the secondary master and has to probe the bus
> by asking the current master for the available devices, and
> then taking over.
> 
> >> IOW, what feature would we lose if we were to declare that
> >> setup above invalid (and ensure you cannot represent it in DT)?  
> >
> > That's exactly the sort of discussion I wanted to trigger. Maybe we
> > shouldn't care and expose this use case as if it was X different I3C
> > buses (with all devices present on the bus being exposed X times
> > to the system).  
> 
> That's probably fine for many slave devices (you could read a
> single sensor multiple times if you iterate through all i2c sensors
> on all buses) but might not work for others (a slave device sending
> an interrupt to the current master for a request that was started
> from the previous master).
> My impression however is that this is actually a corner case that
> we can leave to be undefined, and not prepare to handle well,
> as long as we can deal with the interesting examples above.

Mastership handover/takeover is something I already thought about.
Actually, that's the reason for the i3c_bus->cur_master field (so that
the master being asked to do a transfer on the bus can request bus
ownership it bus->cur_master != master->this->info.pid).

I guess this would be replaced by something simpler if we get rid of
the i3c_bus object (just a bool i3c_master->owns_bus). 

> 
> >> > The devices discovered on the bus are not directly registered to the
> >> > device model, and I need to store them in a list to do some operations
> >> > before exposing them. Once everything is ready to be used, I then
> >> > iterate the list and register all not-yet-registered I3C devs.  
> >>
> >> Can you explain what those operations are and why we can't
> >> register everything directly? This seems rather unconventional,
> >> so I want to make sure it's done for a good reason.  
> >
> > When we start a DAA operation (used to discover all devices on the
> > bus), we have the bus lock held in maintenance mode (AKA exclusive
> > mode). During this DAA the controller will add all the devices it has
> > discovered on the bus and let the core query information about those
> > devices (PID, DCR, HDR capabilies, SDR speed limitations, ...). It
> > might also happen that a device that had been discovered previously is
> > re-discovered because it had lost its dynamic address (i.e. when
> > the device had been reset but not by Linux). In this case the I3C
> > framework does not expose a new device but instead updates the dynamic
> > address of the device already registered to the device model, so that
> > new transactions initiated by the I3C device driver work correctly.
> > This is the very reason we hold the lock in exclusive mode (we want all
> > transactions to be stopped until we have updated dynamic addresses if
> > needed).
> >
> > Now, let's imagine you register the device when the bus lock is held in
> > exclusive mode, and the ->probe() function of the I3C driver needs to
> > do an I3C transfer => you end up with a deadlock.
> >
> > So what we do instead is add new devices to the i3c bus list, release
> > the bus lock and then register all new devices.  
> 
> Ok, but maybe you could you put the information about those devices
> on a local list on the stack rather than the controller? I suppose this
> would not change the logic much, but it would slightly simplify the
> data structures for the bus and stop others from wondering about
> them. ;-)

This has changed a bit in the v6 I'm about to send (probably next week).
I now have 2 different objects which do not necessarily have the same
lifetime:

* i3c_dev_desc: an I3C device descriptor. This is the representation
  exposed to I3C master controller drivers which usually reserve one
  slot in the HW device table per-device on the bus. Since the same
  device can be re-discovered with a different address, we have a short
  period in time during which the controller will have 2
  slots/descriptors used to control the same device, except one would
  be inactive (any transfer to the old dynamic address would fail) and
  the other one would be active. The core then takes care of releasing
  the old descriptor/slot and attaching the new one to the i3c_device
  object exposed to I3C device drivers

* i3c_device: this is the object exposed to I3C device drivers. It's
  lifetime is usually the same as the i3c_dev_desc it's attached to,
  except when the device lose its dynamic address and get a new one
  assigned. In this case we keep the same i3c_device object, but
  dynamically re-attach it to a new i3c_dev_desc before releasing the
  old dev desc. This way the I3C does not even see that the device
  address has changed and can keep doing transfers to it.

With these 2 distinct representations, the handling on the controller
side is greatly simplified: the core takes care of the resource
migration steps, while it was up to the controller to do that my
previous versions (look at the ->reattach_i3c_dev() hook in the Cadence
driver, and I think it's even more complicated with other controllers,
like the HCI one).

> This is a really minor point though, let's work out the problem of the
> multiple masters first.

I agree. This being said, moving to a representation where the bus is
implicitly represented by the master_controller instance shouldn't be
too difficult. So, if you think we should try this approach I can do
the modifications in my v6.

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 01/10] i3c: Add core I3C infrastructure
  2018-07-11 17:12         ` Boris Brezillon
  2018-07-11 20:10           ` Arnd Bergmann
@ 2018-07-12  4:41           ` Peter Rosin
  2018-07-12  8:04             ` Boris Brezillon
  2018-07-12  8:08             ` Arnd Bergmann
  1 sibling, 2 replies; 51+ messages in thread
From: Peter Rosin @ 2018-07-12  4:41 UTC (permalink / raw)
  To: Boris Brezillon, Arnd Bergmann
  Cc: Wolfram Sang, linux-i2c, Jonathan Corbet,
	open list:DOCUMENTATION, Greg Kroah-Hartman, Przemyslaw Sroka,
	Arkadiusz Golec, Alan Douglas, Bartosz Folta, Damian Kos,
	Alicja Jurasik-Urbaniak, Cyprian Wronka, Suresh Punnoose,
	Rafal Ciepiela, Thomas Petazzoni, Nishanth Menon, Rob Herring,
	Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, DTML,
	Linux Kernel Mailing List, Vitor Soares, Geert Uytterhoeven,
	Linus Walleij, Xiang Lin, linux-gpio

[tried to send something like this yesterday, but it appears to have been
lost, sorry for any duplicate]

On 2018-07-11 19:12, Boris Brezillon wrote:
> On Wed, 11 Jul 2018 17:39:56 +0200
> Arnd Bergmann <arnd@arndb.de> wrote:
> 
>> On Wed, Jul 11, 2018 at 4:41 PM, Boris Brezillon
>> <boris.brezillon@bootlin.com> wrote:
>>> On Wed, 11 Jul 2018 16:01:56 +0200 Arnd Bergmann <arnd@arndb.de> wrote:  
>>>>> - the bus element is a separate object and is not implicitly described
>>>>>   by the master (as done in I2C). The reason is that I want to be able
>>>>>   to handle multiple master connected to the same bus and visible to
>>>>>   Linux.
>>>>>   In this situation, we should only have one instance of the device and
>>>>>   not one per master, and sharing the bus object would be part of the
>>>>>   solution to gracefully handle this case.
>>>>>   I'm not sure we will ever need to deal with multiple masters
>>>>>   controlling the same bus and exposed under Linux, but separating the
>>>>>   bus and master concept is pretty easy, hence the decision to do it
>>>>>   like that.
>>>>>   The other benefit of separating the bus and master concepts is that
>>>>>   master devices appear under the bus directory in sysfs.  
>>>>
>>>> I'm not following here at all, sorry for missing prior discussion if this
>>>> was already explained. What is the "multiple master" case? Do you
>>>> mean multiple devices that are controlled by Linux and that each talk
>>>> to other devices on the same bus, multiple operating systems that
>>>> have talk to are able to own the bus with the kernel being one of
>>>> them, a controller that controls multiple independent buses,
>>>> or something else?  
>>>
>>> I mean several masters connected to the same bus and all exposed to the
>>> same Linux instance. In this case, the question is, should we have X
>>> I3C buses exposed (X being the number of masters) or should we only
>>> have one?
>>>
>>> Having a bus represented as a separate object allows us to switch to
>>> the "one bus : X masters" representation if we need too.  
>> ...
>>>>
>>>> This feels a bit odd: so you have bus_type that can contain devices
>>>> of three (?) different device types: i3c_device_type, i3c_master_type
>>>> and i3c_busdev_type.
>>>>
>>>> Generally speaking, we don't have a lot of subsystems that even
>>>> use device_types. I assume that the i3c_device_type for a
>>>> device that corresponds to an endpoint on the bus, but I'm
>>>> still confused about the other two, and why they are part of
>>>> the same bus_type.  
>>>
>>> i3c_busdev is just a virtual device representing the bus itself.
>>> i3c_master is representing the I3C master driving the bus. The reason
>>> for having a different type here is to avoid attaching this device to a
>>> driver but still being able to see the master controller as a device on
>>> the bus. And finally, i3c_device are all remote devices that can be
>>> accessed through a given i3c_master.
>>>
>>> This all comes from the design choice I made to represent the bus as a
>>> separate object in order to be able to share it between different
>>> master controllers exposed through the same Linux instance. Since
>>> master controllers are also remote devices for other controllers, we
>>> need to represent them.  
>>
>> Ok, so I think this is the most important question to resolve: do we
>> actually need to control multiple masters on a single bus from one OS
>> or not?
>>
>> The problem that I see is that it breaks the tree abstraction that
>> we use in the dtb interface, in the driver model and in sysfs.
>> If we need to deal with a hardware bus structure like
>>
>>               cpu
>>              /   \
>>             /     \
>>        platdev   platdev
>>            |        |
>>      i3c-master   i3c-master
>>             \      /
>>              \    /
>>             i3c-bus
>>              /    \
>>          device   device
>>
>> then that abstraction no longer holds. Clearly you could build
>> a system like that, and if we have to support it, the i3c infrastructure
>> should be prepared for it, since we wouldn't be able to retrofit
>> it later.
> 
> Exactly. For the DT representation I thought we could have the primary
> master hold the device nodes, and then have secondary masters reference
> the main master with a phandle (i3c-bus = <&main_i3c_master>;). For the
> sysfs representation, it would be the same. Only one of the master
> would create the i3c_bus object and the other masters would just
> reference it.
> 
>>
>> What would be the point of building such a system though?
> 
> This, I don't know. But as you said, if we go for a "one bus per
> master" representation, going back will be difficult.
> 
>> Is this for performance, failover, or something else?
> 
> No, I don't think so, especially since the mastership handover
> operation is not free. So keeping the same master in control is
> probably better in term of perfs.
> 
> One case I can think of is when the primary master does not have enough
> resources to address all devices on the bus, and let the secondary
> master handle all transactions targeting those devices.
> 
>> IOW, what feature would we lose if we were to declare that
>> setup above invalid (and ensure you cannot represent it in DT)?
> 
> That's exactly the sort of discussion I wanted to trigger. Maybe we
> shouldn't care and expose this use case as if it was X different I3C
> buses (with all devices present on the bus being exposed X times to the
> system).

For I2C, this multiple masters for one bus case was retrofitted in
the i2c-demux-pinctrl driver. It's a huge kludge with a number of
undesirable quirks. I don't know if the circumstances for adding
this I2C driver also applies for I3C, but it might be an argument
in favor of the proposed extra bus object...

Cheers,
Peter

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 01/10] i3c: Add core I3C infrastructure
  2018-07-12  4:41           ` Peter Rosin
@ 2018-07-12  8:04             ` Boris Brezillon
  2018-07-12  8:08             ` Arnd Bergmann
  1 sibling, 0 replies; 51+ messages in thread
From: Boris Brezillon @ 2018-07-12  8:04 UTC (permalink / raw)
  To: Peter Rosin
  Cc: Arnd Bergmann, Wolfram Sang, linux-i2c, Jonathan Corbet,
	open list:DOCUMENTATION, Greg Kroah-Hartman, Przemyslaw Sroka,
	Arkadiusz Golec, Alan Douglas, Bartosz Folta, Damian Kos,
	Alicja Jurasik-Urbaniak, Cyprian Wronka, Suresh Punnoose,
	Rafal Ciepiela, Thomas Petazzoni, Nishanth Menon, Rob Herring,
	Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, DTML,
	Linux Kernel Mailing List, Vitor Soares, Geert Uytterhoeven,
	Linus Walleij, Xiang Lin, linux-gpio

On Thu, 12 Jul 2018 06:41:15 +0200
Peter Rosin <peda@axentia.se> wrote:

> [tried to send something like this yesterday, but it appears to have been
> lost, sorry for any duplicate]
> 
> On 2018-07-11 19:12, Boris Brezillon wrote:
> > On Wed, 11 Jul 2018 17:39:56 +0200
> > Arnd Bergmann <arnd@arndb.de> wrote:
> >   
> >> On Wed, Jul 11, 2018 at 4:41 PM, Boris Brezillon
> >> <boris.brezillon@bootlin.com> wrote:  
> >>> On Wed, 11 Jul 2018 16:01:56 +0200 Arnd Bergmann <arnd@arndb.de> wrote:    
> >>>>> - the bus element is a separate object and is not implicitly described
> >>>>>   by the master (as done in I2C). The reason is that I want to be able
> >>>>>   to handle multiple master connected to the same bus and visible to
> >>>>>   Linux.
> >>>>>   In this situation, we should only have one instance of the device and
> >>>>>   not one per master, and sharing the bus object would be part of the
> >>>>>   solution to gracefully handle this case.
> >>>>>   I'm not sure we will ever need to deal with multiple masters
> >>>>>   controlling the same bus and exposed under Linux, but separating the
> >>>>>   bus and master concept is pretty easy, hence the decision to do it
> >>>>>   like that.
> >>>>>   The other benefit of separating the bus and master concepts is that
> >>>>>   master devices appear under the bus directory in sysfs.    
> >>>>
> >>>> I'm not following here at all, sorry for missing prior discussion if this
> >>>> was already explained. What is the "multiple master" case? Do you
> >>>> mean multiple devices that are controlled by Linux and that each talk
> >>>> to other devices on the same bus, multiple operating systems that
> >>>> have talk to are able to own the bus with the kernel being one of
> >>>> them, a controller that controls multiple independent buses,
> >>>> or something else?    
> >>>
> >>> I mean several masters connected to the same bus and all exposed to the
> >>> same Linux instance. In this case, the question is, should we have X
> >>> I3C buses exposed (X being the number of masters) or should we only
> >>> have one?
> >>>
> >>> Having a bus represented as a separate object allows us to switch to
> >>> the "one bus : X masters" representation if we need too.    
> >> ...  
> >>>>
> >>>> This feels a bit odd: so you have bus_type that can contain devices
> >>>> of three (?) different device types: i3c_device_type, i3c_master_type
> >>>> and i3c_busdev_type.
> >>>>
> >>>> Generally speaking, we don't have a lot of subsystems that even
> >>>> use device_types. I assume that the i3c_device_type for a
> >>>> device that corresponds to an endpoint on the bus, but I'm
> >>>> still confused about the other two, and why they are part of
> >>>> the same bus_type.    
> >>>
> >>> i3c_busdev is just a virtual device representing the bus itself.
> >>> i3c_master is representing the I3C master driving the bus. The reason
> >>> for having a different type here is to avoid attaching this device to a
> >>> driver but still being able to see the master controller as a device on
> >>> the bus. And finally, i3c_device are all remote devices that can be
> >>> accessed through a given i3c_master.
> >>>
> >>> This all comes from the design choice I made to represent the bus as a
> >>> separate object in order to be able to share it between different
> >>> master controllers exposed through the same Linux instance. Since
> >>> master controllers are also remote devices for other controllers, we
> >>> need to represent them.    
> >>
> >> Ok, so I think this is the most important question to resolve: do we
> >> actually need to control multiple masters on a single bus from one OS
> >> or not?
> >>
> >> The problem that I see is that it breaks the tree abstraction that
> >> we use in the dtb interface, in the driver model and in sysfs.
> >> If we need to deal with a hardware bus structure like
> >>
> >>               cpu
> >>              /   \
> >>             /     \
> >>        platdev   platdev
> >>            |        |
> >>      i3c-master   i3c-master
> >>             \      /
> >>              \    /
> >>             i3c-bus
> >>              /    \
> >>          device   device
> >>
> >> then that abstraction no longer holds. Clearly you could build
> >> a system like that, and if we have to support it, the i3c infrastructure
> >> should be prepared for it, since we wouldn't be able to retrofit
> >> it later.  
> > 
> > Exactly. For the DT representation I thought we could have the primary
> > master hold the device nodes, and then have secondary masters reference
> > the main master with a phandle (i3c-bus = <&main_i3c_master>;). For the
> > sysfs representation, it would be the same. Only one of the master
> > would create the i3c_bus object and the other masters would just
> > reference it.
> >   
> >>
> >> What would be the point of building such a system though?  
> > 
> > This, I don't know. But as you said, if we go for a "one bus per
> > master" representation, going back will be difficult.
> >   
> >> Is this for performance, failover, or something else?  
> > 
> > No, I don't think so, especially since the mastership handover
> > operation is not free. So keeping the same master in control is
> > probably better in term of perfs.
> > 
> > One case I can think of is when the primary master does not have enough
> > resources to address all devices on the bus, and let the secondary
> > master handle all transactions targeting those devices.
> >   
> >> IOW, what feature would we lose if we were to declare that
> >> setup above invalid (and ensure you cannot represent it in DT)?  
> > 
> > That's exactly the sort of discussion I wanted to trigger. Maybe we
> > shouldn't care and expose this use case as if it was X different I3C
> > buses (with all devices present on the bus being exposed X times to the
> > system).  
> 
> For I2C, this multiple masters for one bus case was retrofitted in
> the i2c-demux-pinctrl driver. It's a huge kludge with a number of
> undesirable quirks. I don't know if the circumstances for adding
> this I2C driver also applies for I3C,

It's hard to guess now.

> but it might be an argument
> in favor of the proposed extra bus object...

I know that Wolfram was in favor of this separate bus <-> master
representation, probably because of his experience with this particular
driver.


^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 01/10] i3c: Add core I3C infrastructure
  2018-07-12  4:41           ` Peter Rosin
  2018-07-12  8:04             ` Boris Brezillon
@ 2018-07-12  8:08             ` Arnd Bergmann
  2018-07-12  8:44               ` Peter Rosin
  1 sibling, 1 reply; 51+ messages in thread
From: Arnd Bergmann @ 2018-07-12  8:08 UTC (permalink / raw)
  To: Peter Rosin
  Cc: Boris Brezillon, Wolfram Sang, linux-i2c, Jonathan Corbet,
	open list:DOCUMENTATION, Greg Kroah-Hartman, Przemyslaw Sroka,
	Arkadiusz Golec, Alan Douglas, Bartosz Folta, Damian Kos,
	Alicja Jurasik-Urbaniak, Cyprian Wronka, Suresh Punnoose,
	Rafal Ciepiela, Thomas Petazzoni, Nishanth Menon, Rob Herring,
	Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, DTML,
	Linux Kernel Mailing List, Vitor Soares, Geert Uytterhoeven,
	Linus Walleij, Xiang Lin, linux-gpio

On Thu, Jul 12, 2018 at 6:41 AM, Peter Rosin <peda@axentia.se> wrote:
> On 2018-07-11 19:12, Boris Brezillon wrote:
>> On Wed, 11 Jul 2018 17:39:56 +0200 Arnd Bergmann <arnd@arndb.de> wrote:
>>
>> That's exactly the sort of discussion I wanted to trigger. Maybe we
>> shouldn't care and expose this use case as if it was X different I3C
>> buses (with all devices present on the bus being exposed X times to the
>> system).
>
> For I2C, this multiple masters for one bus case was retrofitted in
> the i2c-demux-pinctrl driver. It's a huge kludge with a number of
> undesirable quirks. I don't know if the circumstances for adding
> this I2C driver also applies for I3C, but it might be an argument
> in favor of the proposed extra bus object...

From reading the documentation and git history on that driver,
it seems to be used only for static configuration, i.e. you use
one driver or the other, but don't flip between them at runtime,
right?

I'm guessing that even with i3c we may have to support something
like that, as a likely scenario might be that the i3c controller is
multiplexed with a traditional i2c controller and/or gpios, but you
would not be able to perform the i3c standard secondary master
transition with the latter two because they are (by definition) not
i3c compatible.

       Arnd

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 01/10] i3c: Add core I3C infrastructure
  2018-07-11 22:09             ` Boris Brezillon
@ 2018-07-12  8:21               ` Arnd Bergmann
  2018-07-12  8:46                 ` Boris Brezillon
  0 siblings, 1 reply; 51+ messages in thread
From: Arnd Bergmann @ 2018-07-12  8:21 UTC (permalink / raw)
  To: Boris Brezillon
  Cc: Wolfram Sang, linux-i2c, Jonathan Corbet,
	open list:DOCUMENTATION, Greg Kroah-Hartman, Przemyslaw Sroka,
	Arkadiusz Golec, Alan Douglas, Bartosz Folta, Damian Kos,
	Alicja Jurasik-Urbaniak, Cyprian Wronka, Suresh Punnoose,
	Rafal Ciepiela, Thomas Petazzoni, Nishanth Menon, Rob Herring,
	Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, DTML,
	Linux Kernel Mailing List, Vitor Soares, Geert Uytterhoeven,
	Linus Walleij, Xiang Lin, linux-gpio

On Thu, Jul 12, 2018 at 12:09 AM, Boris Brezillon
<boris.brezillon@bootlin.com> wrote:
> On Wed, 11 Jul 2018 22:10:26 +0200 Arnd Bergmann <arnd@arndb.de> wrote:
>> On Wed, Jul 11, 2018 at 7:12 PM, Boris Brezillon <boris.brezillon@bootlin.com> wrote:
>> > On Wed, 11 Jul 2018 17:39:56 +0200 Arnd Bergmann <arnd@arndb.de> wrote:
>> >> On Wed, Jul 11, 2018 at 4:41 PM, Boris Brezillon <boris.brezillon@bootlin.com> wrote:

>> >> IOW, what feature would we lose if we were to declare that
>> >> setup above invalid (and ensure you cannot represent it in DT)?
>> >
>> > That's exactly the sort of discussion I wanted to trigger. Maybe we
>> > shouldn't care and expose this use case as if it was X different I3C
>> > buses (with all devices present on the bus being exposed X times
>> > to the system).
>>
>> That's probably fine for many slave devices (you could read a
>> single sensor multiple times if you iterate through all i2c sensors
>> on all buses) but might not work for others (a slave device sending
>> an interrupt to the current master for a request that was started
>> from the previous master).
>> My impression however is that this is actually a corner case that
>> we can leave to be undefined, and not prepare to handle well,
>> as long as we can deal with the interesting examples above.
>
> Mastership handover/takeover is something I already thought about.
> Actually, that's the reason for the i3c_bus->cur_master field (so that
> the master being asked to do a transfer on the bus can request bus
> ownership it bus->cur_master != master->this->info.pid).
>
> I guess this would be replaced by something simpler if we get rid of
> the i3c_bus object (just a bool i3c_master->owns_bus).

If we can ignore the case of handing over between two masters that
we both own, we end up being in just one of two states:

a) currently we are the master
b) we are not currently the master but have asked the current
    master to transfer ownership back to us. For this, we have to
    know who the current master is of course.

I think that's the simplest case that would work with the specification,
but it relies on the assumption that the master controlled by Linux
is always more important than any other master, and that we just
hand over ownership for as long as the others want it.

If that is not the case, we also need a third state

c) we have handed ownership to another master that is equally
    important, but no i2c device driver is currently trying to talk
    to a device, so we don't need ownership back until a slave driver
    changes state.

The main difference between b) and c) that I see would be what
happens with in-band interrupts. If I understand the specification
correctly, only the current master receives them, so if you have
any i2c device that uses interrupts to talk to a Linux driver, we
want to be in b) rather than c). An example of this would be
an input device on a PC: If the user operateds the keyboard
or pointer and we have handed off ownership to a sensor hub,
we never get an input event, right?

>> Ok, but maybe you could you put the information about those devices
>> on a local list on the stack rather than the controller? I suppose this
>> would not change the logic much, but it would slightly simplify the
>> data structures for the bus and stop others from wondering about
>> them. ;-)
>
> This has changed a bit in the v6 I'm about to send (probably next week).
> I now have 2 different objects which do not necessarily have the same
> lifetime:
>
> * i3c_dev_desc: an I3C device descriptor. This is the representation
>   exposed to I3C master controller drivers which usually reserve one
>   slot in the HW device table per-device on the bus. Since the same
>   device can be re-discovered with a different address, we have a short
>   period in time during which the controller will have 2
>   slots/descriptors used to control the same device, except one would
>   be inactive (any transfer to the old dynamic address would fail) and
>   the other one would be active. The core then takes care of releasing
>   the old descriptor/slot and attaching the new one to the i3c_device
>   object exposed to I3C device drivers
>
> * i3c_device: this is the object exposed to I3C device drivers. It's
>   lifetime is usually the same as the i3c_dev_desc it's attached to,
>   except when the device lose its dynamic address and get a new one
>   assigned. In this case we keep the same i3c_device object, but
>   dynamically re-attach it to a new i3c_dev_desc before releasing the
>   old dev desc. This way the I3C does not even see that the device
>   address has changed and can keep doing transfers to it.
>
> With these 2 distinct representations, the handling on the controller
> side is greatly simplified: the core takes care of the resource
> migration steps, while it was up to the controller to do that my
> previous versions (look at the ->reattach_i3c_dev() hook in the Cadence
> driver, and I think it's even more complicated with other controllers,
> like the HCI one).
>
>> This is a really minor point though, let's work out the problem of the
>> multiple masters first.
>
> I agree. This being said, moving to a representation where the bus is
> implicitly represented by the master_controller instance shouldn't be
> too difficult. So, if you think we should try this approach I can do
> the modifications in my v6.

I'd say let's wait before you do that change, possibly add a comment
in there now to remind us of what an alternative would be.

       Arnd

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 01/10] i3c: Add core I3C infrastructure
  2018-07-12  8:08             ` Arnd Bergmann
@ 2018-07-12  8:44               ` Peter Rosin
  0 siblings, 0 replies; 51+ messages in thread
From: Peter Rosin @ 2018-07-12  8:44 UTC (permalink / raw)
  To: Arnd Bergmann
  Cc: Boris Brezillon, Wolfram Sang, linux-i2c, Jonathan Corbet,
	open list:DOCUMENTATION, Greg Kroah-Hartman, Przemyslaw Sroka,
	Arkadiusz Golec, Alan Douglas, Bartosz Folta, Damian Kos,
	Alicja Jurasik-Urbaniak, Cyprian Wronka, Suresh Punnoose,
	Rafal Ciepiela, Thomas Petazzoni, Nishanth Menon, Rob Herring,
	Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, DTML,
	Linux Kernel Mailing List, Vitor Soares, Geert Uytterhoeven,
	Linus Walleij, Xiang Lin, linux-gpio

On 2018-07-12 10:08, Arnd Bergmann wrote:
> On Thu, Jul 12, 2018 at 6:41 AM, Peter Rosin <peda@axentia.se> wrote:
>> On 2018-07-11 19:12, Boris Brezillon wrote:
>>> On Wed, 11 Jul 2018 17:39:56 +0200 Arnd Bergmann <arnd@arndb.de> wrote:
>>>
>>> That's exactly the sort of discussion I wanted to trigger. Maybe we
>>> shouldn't care and expose this use case as if it was X different I3C
>>> buses (with all devices present on the bus being exposed X times to the
>>> system).
>>
>> For I2C, this multiple masters for one bus case was retrofitted in
>> the i2c-demux-pinctrl driver. It's a huge kludge with a number of
>> undesirable quirks. I don't know if the circumstances for adding
>> this I2C driver also applies for I3C, but it might be an argument
>> in favor of the proposed extra bus object...
> 
> From reading the documentation and git history on that driver,
> it seems to be used only for static configuration, i.e. you use
> one driver or the other, but don't flip between them at runtime,
> right?

There is a sysfs file that can be used to change master at runtime
(current_master). This causes all client drivers to be reprobed,
which may not be the best thing to do for every client out there...

> I'm guessing that even with i3c we may have to support something
> like that, as a likely scenario might be that the i3c controller is
> multiplexed with a traditional i2c controller and/or gpios, but you
> would not be able to perform the i3c standard secondary master
> transition with the latter two because they are (by definition) not
> i3c compatible.

i2c-demux-pinctrl should probably not be used as template for something
else, but it is a good argument for some other design IMHO...

Cheers,
Peter

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 01/10] i3c: Add core I3C infrastructure
  2018-07-12  8:21               ` Arnd Bergmann
@ 2018-07-12  8:46                 ` Boris Brezillon
  2018-07-12 10:03                   ` Arnd Bergmann
  0 siblings, 1 reply; 51+ messages in thread
From: Boris Brezillon @ 2018-07-12  8:46 UTC (permalink / raw)
  To: Arnd Bergmann
  Cc: Wolfram Sang, linux-i2c, Jonathan Corbet,
	open list:DOCUMENTATION, Greg Kroah-Hartman, Przemyslaw Sroka,
	Arkadiusz Golec, Alan Douglas, Bartosz Folta, Damian Kos,
	Alicja Jurasik-Urbaniak, Cyprian Wronka, Suresh Punnoose,
	Rafal Ciepiela, Thomas Petazzoni, Nishanth Menon, Rob Herring,
	Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, DTML,
	Linux Kernel Mailing List, Vitor Soares, Geert Uytterhoeven,
	Linus Walleij, Xiang Lin, linux-gpio

On Thu, 12 Jul 2018 10:21:40 +0200
Arnd Bergmann <arnd@arndb.de> wrote:

> On Thu, Jul 12, 2018 at 12:09 AM, Boris Brezillon
> <boris.brezillon@bootlin.com> wrote:
> > On Wed, 11 Jul 2018 22:10:26 +0200 Arnd Bergmann <arnd@arndb.de> wrote:  
> >> On Wed, Jul 11, 2018 at 7:12 PM, Boris Brezillon <boris.brezillon@bootlin.com> wrote:  
> >> > On Wed, 11 Jul 2018 17:39:56 +0200 Arnd Bergmann <arnd@arndb.de> wrote:  
> >> >> On Wed, Jul 11, 2018 at 4:41 PM, Boris Brezillon <boris.brezillon@bootlin.com> wrote:  
> 
> >> >> IOW, what feature would we lose if we were to declare that
> >> >> setup above invalid (and ensure you cannot represent it in DT)?  
> >> >
> >> > That's exactly the sort of discussion I wanted to trigger. Maybe we
> >> > shouldn't care and expose this use case as if it was X different I3C
> >> > buses (with all devices present on the bus being exposed X times
> >> > to the system).  
> >>
> >> That's probably fine for many slave devices (you could read a
> >> single sensor multiple times if you iterate through all i2c sensors
> >> on all buses) but might not work for others (a slave device sending
> >> an interrupt to the current master for a request that was started
> >> from the previous master).
> >> My impression however is that this is actually a corner case that
> >> we can leave to be undefined, and not prepare to handle well,
> >> as long as we can deal with the interesting examples above.  
> >
> > Mastership handover/takeover is something I already thought about.
> > Actually, that's the reason for the i3c_bus->cur_master field (so that
> > the master being asked to do a transfer on the bus can request bus
> > ownership it bus->cur_master != master->this->info.pid).
> >
> > I guess this would be replaced by something simpler if we get rid of
> > the i3c_bus object (just a bool i3c_master->owns_bus).  
> 
> If we can ignore the case of handing over between two masters that
> we both own, we end up being in just one of two states:
> 
> a) currently we are the master
> b) we are not currently the master but have asked the current
>     master to transfer ownership back to us. For this, we have to
>     know who the current master is of course.
> 
> I think that's the simplest case that would work with the specification,
> but it relies on the assumption that the master controlled by Linux
> is always more important than any other master, and that we just
> hand over ownership for as long as the others want it.
> 
> If that is not the case, we also need a third state
> 
> c) we have handed ownership to another master that is equally
>     important, but no i2c device driver is currently trying to talk
>     to a device, so we don't need ownership back until a slave driver
>     changes state.

That was the solution I was opting for.

> 
> The main difference between b) and c) that I see would be what
> happens with in-band interrupts. If I understand the specification
> correctly, only the current master receives them, so if you have
> any i2c device that uses interrupts to talk to a Linux driver, we

      ^ you mean i3c here, right?

> want to be in b) rather than c). An example of this would be
> an input device on a PC: If the user operateds the keyboard
> or pointer and we have handed off ownership to a sensor hub,
> we never get an input event, right?

Correct. I guess we could try to regain bus ownership in case we have
IBIs enabled. Or we let the secondary master give the bus back to us
when it sees IBIs it can't handle, as described in section 5.1.7:

"
Once granted control of the Bus, the Secondary Master maintains
control until another Master is granted Bus control. After the
Secondary Master transitions to the Current Master role it could
encounter Bus management activities besides the data transfers that it
itself initiates. Some examples are the In-Band Interrupt, or the
Hot-Join request. One optional possibility, shown at Section 5.1.7.2,
is that the Secondary Master performs the Current Master’s actions with
the full capabilities of the Main Master. Another optional possibility
is that the Secondary Master, while serving in the Current Master role,
could defer some actions to a more capable Master, as described in
Section 5.1.7.3.
"

> 
> >> Ok, but maybe you could you put the information about those devices
> >> on a local list on the stack rather than the controller? I suppose this
> >> would not change the logic much, but it would slightly simplify the
> >> data structures for the bus and stop others from wondering about
> >> them. ;-)  
> >
> > This has changed a bit in the v6 I'm about to send (probably next week).
> > I now have 2 different objects which do not necessarily have the same
> > lifetime:
> >
> > * i3c_dev_desc: an I3C device descriptor. This is the representation
> >   exposed to I3C master controller drivers which usually reserve one
> >   slot in the HW device table per-device on the bus. Since the same
> >   device can be re-discovered with a different address, we have a short
> >   period in time during which the controller will have 2
> >   slots/descriptors used to control the same device, except one would
> >   be inactive (any transfer to the old dynamic address would fail) and
> >   the other one would be active. The core then takes care of releasing
> >   the old descriptor/slot and attaching the new one to the i3c_device
> >   object exposed to I3C device drivers
> >
> > * i3c_device: this is the object exposed to I3C device drivers. It's
> >   lifetime is usually the same as the i3c_dev_desc it's attached to,
> >   except when the device lose its dynamic address and get a new one
> >   assigned. In this case we keep the same i3c_device object, but
> >   dynamically re-attach it to a new i3c_dev_desc before releasing the
> >   old dev desc. This way the I3C does not even see that the device
> >   address has changed and can keep doing transfers to it.
> >
> > With these 2 distinct representations, the handling on the controller
> > side is greatly simplified: the core takes care of the resource
> > migration steps, while it was up to the controller to do that my
> > previous versions (look at the ->reattach_i3c_dev() hook in the Cadence
> > driver, and I think it's even more complicated with other controllers,
> > like the HCI one).
> >  
> >> This is a really minor point though, let's work out the problem of the
> >> multiple masters first.  
> >
> > I agree. This being said, moving to a representation where the bus is
> > implicitly represented by the master_controller instance shouldn't be
> > too difficult. So, if you think we should try this approach I can do
> > the modifications in my v6.  
> 
> I'd say let's wait before you do that change, possibly add a comment
> in there now to remind us of what an alternative would be.

You mean I should keep the i3c_bus object?

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 01/10] i3c: Add core I3C infrastructure
  2018-07-12  8:46                 ` Boris Brezillon
@ 2018-07-12 10:03                   ` Arnd Bergmann
  2018-07-12 10:24                     ` Boris Brezillon
  0 siblings, 1 reply; 51+ messages in thread
From: Arnd Bergmann @ 2018-07-12 10:03 UTC (permalink / raw)
  To: Boris Brezillon
  Cc: Wolfram Sang, linux-i2c, Jonathan Corbet,
	open list:DOCUMENTATION, Greg Kroah-Hartman, Przemyslaw Sroka,
	Arkadiusz Golec, Alan Douglas, Bartosz Folta, Damian Kos,
	Alicja Jurasik-Urbaniak, Cyprian Wronka, Suresh Punnoose,
	Rafal Ciepiela, Thomas Petazzoni, Nishanth Menon, Rob Herring,
	Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, DTML,
	Linux Kernel Mailing List, Vitor Soares, Geert Uytterhoeven,
	Linus Walleij, Xiang Lin, linux-gpio

On Thu, Jul 12, 2018 at 10:46 AM, Boris Brezillon
<boris.brezillon@bootlin.com> wrote:
> On Thu, 12 Jul 2018 10:21:40 +0200 Arnd Bergmann <arnd@arndb.de> wrote:
>> On Thu, Jul 12, 2018 at 12:09 AM, Boris Brezillon <boris.brezillon@bootlin.com> wrote:
>> > On Wed, 11 Jul 2018 22:10:26 +0200 Arnd Bergmann <arnd@arndb.de> wrote:
>> >> On Wed, Jul 11, 2018 at 7:12 PM, Boris Brezillon <boris.brezillon@bootlin.com> wrote:
>> >> > On Wed, 11 Jul 2018 17:39:56 +0200 Arnd Bergmann <arnd@arndb.de> wrote:
>> >> >> On Wed, Jul 11, 2018 at 4:41 PM, Boris Brezillon <boris.brezillon@bootlin.com> wrote:
>>
>> If we can ignore the case of handing over between two masters that
>> we both own, we end up being in just one of two states:
>>
>> a) currently we are the master
>> b) we are not currently the master but have asked the current
>>     master to transfer ownership back to us. For this, we have to
>>     know who the current master is of course.
>>
>> I think that's the simplest case that would work with the specification,
>> but it relies on the assumption that the master controlled by Linux
>> is always more important than any other master, and that we just
>> hand over ownership for as long as the others want it.
>>
>> If that is not the case, we also need a third state
>>
>> c) we have handed ownership to another master that is equally
>>     important, but no i2c device driver is currently trying to talk
>>     to a device, so we don't need ownership back until a slave driver
>>     changes state.
>
> That was the solution I was opting for.
>
>>
>> The main difference between b) and c) that I see would be what
>> happens with in-band interrupts. If I understand the specification
>> correctly, only the current master receives them, so if you have
>> any i2c device that uses interrupts to talk to a Linux driver, we
>
>       ^ you mean i3c here, right?

sure

>> want to be in b) rather than c). An example of this would be
>> an input device on a PC: If the user operateds the keyboard
>> or pointer and we have handed off ownership to a sensor hub,
>> we never get an input event, right?
>
> Correct. I guess we could try to regain bus ownership in case we have
> IBIs enabled. Or we let the secondary master give the bus back to us
> when it sees IBIs it can't handle, as described in section 5.1.7:
>
> "
> Once granted control of the Bus, the Secondary Master maintains
> control until another Master is granted Bus control. After the
> Secondary Master transitions to the Current Master role it could
> encounter Bus management activities besides the data transfers that it
> itself initiates. Some examples are the In-Band Interrupt, or the
> Hot-Join request. One optional possibility, shown at Section 5.1.7.2,
> is that the Secondary Master performs the Current Master’s actions with
> the full capabilities of the Main Master. Another optional possibility
> is that the Secondary Master, while serving in the Current Master role,
> could defer some actions to a more capable Master, as described in
> Section 5.1.7.3.
> "

Ah, so the current master can ask a secondary master to take over
again even if  the secondary master has not requested to be come the
current master?

>> > I agree. This being said, moving to a representation where the bus is
>> > implicitly represented by the master_controller instance shouldn't be
>> > too difficult. So, if you think we should try this approach I can do
>> > the modifications in my v6.
>>
>> I'd say let's wait before you do that change, possibly add a comment
>> in there now to remind us of what an alternative would be.
>
> You mean I should keep the i3c_bus object?

I mean the ongoing discussion shouldn't stop you from posting a v6.

        Arnd

^ permalink raw reply	[flat|nested] 51+ messages in thread

* Re: [PATCH v4 01/10] i3c: Add core I3C infrastructure
  2018-07-12 10:03                   ` Arnd Bergmann
@ 2018-07-12 10:24                     ` Boris Brezillon
  0 siblings, 0 replies; 51+ messages in thread
From: Boris Brezillon @ 2018-07-12 10:24 UTC (permalink / raw)
  To: Arnd Bergmann
  Cc: Wolfram Sang, linux-i2c, Jonathan Corbet,
	open list:DOCUMENTATION, Greg Kroah-Hartman, Przemyslaw Sroka,
	Arkadiusz Golec, Alan Douglas, Bartosz Folta, Damian Kos,
	Alicja Jurasik-Urbaniak, Cyprian Wronka, Suresh Punnoose,
	Rafal Ciepiela, Thomas Petazzoni, Nishanth Menon, Rob Herring,
	Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, DTML,
	Linux Kernel Mailing List, Vitor Soares, Geert Uytterhoeven,
	Linus Walleij, Xiang Lin, linux-gpio

On Thu, 12 Jul 2018 12:03:05 +0200
Arnd Bergmann <arnd@arndb.de> wrote:

> >> want to be in b) rather than c). An example of this would be
> >> an input device on a PC: If the user operateds the keyboard
> >> or pointer and we have handed off ownership to a sensor hub,
> >> we never get an input event, right?  
> >
> > Correct. I guess we could try to regain bus ownership in case we have
> > IBIs enabled. Or we let the secondary master give the bus back to us
> > when it sees IBIs it can't handle, as described in section 5.1.7:
> >
> > "
> > Once granted control of the Bus, the Secondary Master maintains
> > control until another Master is granted Bus control. After the
> > Secondary Master transitions to the Current Master role it could
> > encounter Bus management activities besides the data transfers that it
> > itself initiates. Some examples are the In-Band Interrupt, or the
> > Hot-Join request. One optional possibility, shown at Section 5.1.7.2,
> > is that the Secondary Master performs the Current Master’s actions with
> > the full capabilities of the Main Master. Another optional possibility
> > is that the Secondary Master, while serving in the Current Master role,
> > could defer some actions to a more capable Master, as described in
> > Section 5.1.7.3.
> > "  
> 
> Ah, so the current master can ask a secondary master to take over
> again even if  the secondary master has not requested to be come the
> current master?

Yes. Then the inactive master can refuse of course, but it is working
both ways:

- an inactive master can ask for bus ownership
- an active master can ask an inactive one to take over

> 
> >> > I agree. This being said, moving to a representation where the bus is
> >> > implicitly represented by the master_controller instance shouldn't be
> >> > too difficult. So, if you think we should try this approach I can do
> >> > the modifications in my v6.  
> >>
> >> I'd say let's wait before you do that change, possibly add a comment
> >> in there now to remind us of what an alternative would be.  
> >
> > You mean I should keep the i3c_bus object?  
> 
> I mean the ongoing discussion shouldn't stop you from posting a v6.

Ok.

^ permalink raw reply	[flat|nested] 51+ messages in thread

end of thread, other threads:[~2018-07-12 10:24 UTC | newest]

Thread overview: 51+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-03-30  7:47 [PATCH v4 00/10] Add the I3C subsystem Boris Brezillon
2018-03-30  7:47 ` [PATCH v4 01/10] i3c: Add core I3C infrastructure Boris Brezillon
2018-06-04  9:11   ` Przemyslaw Gaj
2018-06-04 11:24     ` Boris Brezillon
2018-06-14  4:19   ` Wolfram Sang
2018-06-14  7:07     ` Boris Brezillon
2018-06-14  8:15       ` Wolfram Sang
2018-06-20 11:37   ` Sekhar Nori
2018-06-20 12:47     ` Boris Brezillon
2018-07-11 14:01   ` Arnd Bergmann
2018-07-11 14:41     ` Boris Brezillon
2018-07-11 15:03       ` Boris Brezillon
2018-07-11 15:39       ` Arnd Bergmann
2018-07-11 17:12         ` Boris Brezillon
2018-07-11 20:10           ` Arnd Bergmann
2018-07-11 22:09             ` Boris Brezillon
2018-07-12  8:21               ` Arnd Bergmann
2018-07-12  8:46                 ` Boris Brezillon
2018-07-12 10:03                   ` Arnd Bergmann
2018-07-12 10:24                     ` Boris Brezillon
2018-07-12  4:41           ` Peter Rosin
2018-07-12  8:04             ` Boris Brezillon
2018-07-12  8:08             ` Arnd Bergmann
2018-07-12  8:44               ` Peter Rosin
2018-03-30  7:47 ` [PATCH v4 02/10] docs: driver-api: Add I3C documentation Boris Brezillon
2018-03-30  7:47 ` [PATCH v4 03/10] i3c: Add sysfs ABI spec Boris Brezillon
2018-04-29 13:37   ` Greg Kroah-Hartman
2018-04-30  9:10     ` Boris Brezillon
2018-05-02  9:47     ` Geert Uytterhoeven
2018-05-02 11:10       ` Greg Kroah-Hartman
2018-05-02 11:32         ` Geert Uytterhoeven
2018-03-30  7:47 ` [PATCH v4 04/10] dt-bindings: i3c: Document core bindings Boris Brezillon
2018-03-30  7:55   ` Geert Uytterhoeven
2018-03-30  7:59     ` Boris Brezillon
2018-04-09 20:24   ` Rob Herring
2018-03-30  7:47 ` [PATCH v4 05/10] dt-bindings: i3c: Add macros to help fill I3C/I2C device's reg property Boris Brezillon
2018-03-30  7:47 ` [PATCH v4 06/10] MAINTAINERS: Add myself as the I3C subsystem maintainer Boris Brezillon
2018-03-30  7:47 ` [PATCH v4 07/10] i3c: master: Add driver for Cadence IP Boris Brezillon
2018-06-04  9:24   ` Przemyslaw Gaj
2018-06-04 11:26     ` Boris Brezillon
2018-03-30  7:47 ` [PATCH v4 08/10] dt-bindings: i3c: Document Cadence I3C master bindings Boris Brezillon
2018-04-09 20:25   ` Rob Herring
2018-03-30  7:47 ` [PATCH v4 09/10] gpio: Add a driver for Cadence I3C GPIO expander Boris Brezillon
2018-04-26  8:44   ` Linus Walleij
2018-06-22  8:24     ` Boris Brezillon
2018-03-30  7:47 ` [PATCH v4 10/10] dt-bindings: gpio: Add bindings for Cadence I3C gpio expander Boris Brezillon
2018-04-09 20:26   ` Rob Herring
2018-04-23 17:38 ` [PATCH v4 00/10] Add the I3C subsystem Boris Brezillon
2018-04-23 17:56   ` Greg Kroah-Hartman
2018-04-29 13:36     ` Greg Kroah-Hartman
2018-04-30  9:37       ` Boris Brezillon

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).