From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Amit Kucheria <amit.kucheria@linaro.org>
Cc: linux-kernel@vger.kernel.org, rnayak@codeaurora.org,
linux-arm-msm@vger.kernel.org, edubezval@gmail.com,
smohanad@codeaurora.org, vivek.gautam@codeaurora.org,
andy.gross@linaro.org, Zhang Rui <rui.zhang@intel.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v6 6/7] dt: thermal: tsens: Document the fallback DT property for v2 of TSENS IP
Date: Wed, 11 Jul 2018 09:42:09 -0700 [thread overview]
Message-ID: <20180711164209.GF545@tuxbook-pro> (raw)
In-Reply-To: <bf1147fa417314b2fbf5c0cfb682445587fe39bb.1531136000.git.amit.kucheria@linaro.org>
On Mon 09 Jul 04:43 PDT 2018, Amit Kucheria wrote:
> We want to create common code for v2 of the TSENS IP block that is used in
> a large number of Qualcomm SoCs. "qcom,tsens-v2" should be able to handle
> most of the common functionality start with a common get_temp() function.
>
> It is also necessary to split out the memory regions for the TM and SROT
> register banks because their offsets are not constant across SoC families.
>
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Regards,
Bjorn
> ---
> .../devicetree/bindings/thermal/qcom-tsens.txt | 25 +++++++++++++++++-----
> 1 file changed, 20 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> index 06195e8..8f963b1 100644
> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> @@ -1,10 +1,16 @@
> * QCOM SoC Temperature Sensor (TSENS)
>
> Required properties:
> -- compatible :
> - - "qcom,msm8916-tsens" : For 8916 Family of SoCs
> - - "qcom,msm8974-tsens" : For 8974 Family of SoCs
> - - "qcom,msm8996-tsens" : For 8996 Family of SoCs
> +- compatible:
> + Must be one of the following:
> + - "qcom,msm8916-tsens" (MSM8916)
> + - "qcom,msm8974-tsens" (MSM8974)
> + - "qcom,msm8996-tsens" (MSM8996)
> + - "qcom,msm8998-tsens", "qcom,tsens-v2" (MSM8998)
> + - "qcom,sdm845-tsens", "qcom,tsens-v2" (SDM845)
> + The generic "qcom,tsens-v2" property must be used as a fallback for any SoC with
> + version 2 of the TSENS IP. MSM8996 is the only exception beacause the generic
> + property did not exist when support was added.
>
> - reg: Address range of the thermal registers
> - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
> @@ -12,7 +18,7 @@ Required properties:
> - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
> nvmem cells
>
> -Example:
> +Example 1 (legacy support before a fallback tsens-v2 propoerty was introduced):
> tsens: thermal-sensor@900000 {
> compatible = "qcom,msm8916-tsens";
> reg = <0x4a8000 0x2000>;
> @@ -20,3 +26,12 @@ tsens: thermal-sensor@900000 {
> nvmem-cell-names = "caldata", "calsel";
> #thermal-sensor-cells = <1>;
> };
> +
> +Example 2 (for any platform containing v2 of the TSENS IP):
> +tsens0: tsens@c222000 {
> + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
> + reg = <0xc263000 0x1ff>, /* TM */
> + <0xc222000 0x1ff>; /* SROT */
> + #qcom,sensors = <13>;
> + #thermal-sensor-cells = <1>;
> + };
> --
> 2.7.4
>
next prev parent reply other threads:[~2018-07-11 16:39 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-09 11:43 [PATCH v6 0/7] thermal: tsens: Refactoring for TSENSv2 IP Amit Kucheria
2018-07-09 11:43 ` [PATCH v6 1/7] thermal: tsens: Get rid of unused fields in structure Amit Kucheria
2018-07-09 11:43 ` [PATCH v6 2/7] thermal: tsens: Add support to split up register address space into two Amit Kucheria
2018-07-11 16:34 ` Bjorn Andersson
2018-07-11 18:37 ` Doug Anderson
2018-07-12 4:40 ` Amit Kucheria
2018-07-09 11:43 ` [PATCH v6 3/7] dt: qcom: 8996: thermal: Move to DT initialisation Amit Kucheria
2018-07-11 16:37 ` Bjorn Andersson
2018-07-11 18:39 ` Doug Anderson
2018-07-12 5:03 ` Amit Kucheria
2018-07-09 11:43 ` [PATCH v6 4/7] thermal: tsens: Rename tsens-8996 to tsens-v2 for reuse Amit Kucheria
2018-07-11 16:39 ` Bjorn Andersson
2018-07-09 11:43 ` [PATCH v6 5/7] thermal: tsens: Add generic support for TSENS v2 IP Amit Kucheria
2018-07-11 16:40 ` Bjorn Andersson
2018-07-11 18:40 ` Doug Anderson
2018-07-12 5:12 ` Amit Kucheria
2018-07-09 11:43 ` [PATCH v6 6/7] dt: thermal: tsens: Document the fallback DT property for v2 of TSENS IP Amit Kucheria
2018-07-11 13:49 ` Rob Herring
2018-07-11 16:42 ` Bjorn Andersson [this message]
2018-07-11 18:42 ` Doug Anderson
2018-07-12 5:56 ` Amit Kucheria
2018-07-09 11:43 ` [PATCH v6 7/7] arm64: dts: sdm845: Add tsens nodes Amit Kucheria
2018-07-11 16:41 ` Bjorn Andersson
2018-07-11 18:44 ` Doug Anderson
2018-07-11 21:51 ` Matthias Kaehlcke
2018-07-11 22:00 ` Doug Anderson
2018-07-12 5:36 ` Amit Kucheria
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180711164209.GF545@tuxbook-pro \
--to=bjorn.andersson@linaro.org \
--cc=amit.kucheria@linaro.org \
--cc=andy.gross@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=edubezval@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=rnayak@codeaurora.org \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
--cc=smohanad@codeaurora.org \
--cc=vivek.gautam@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).