linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Pavel Tatashin <pasha.tatashin@oracle.com>
To: steven.sistare@oracle.com, daniel.m.jordan@oracle.com,
	linux@armlinux.org.uk, schwidefsky@de.ibm.com,
	heiko.carstens@de.ibm.com, john.stultz@linaro.org,
	sboyd@codeaurora.org, x86@kernel.org,
	linux-kernel@vger.kernel.org, mingo@redhat.com,
	tglx@linutronix.de, hpa@zytor.com, douly.fnst@cn.fujitsu.com,
	peterz@infradead.org, prarit@redhat.com, feng.tang@intel.com,
	pmladek@suse.com, gnomes@lxorguk.ukuu.org.uk,
	linux-s390@vger.kernel.org, pasha.tatashin@oracle.com,
	boris.ostrovsky@oracle.com, jgross@suse.com, pbonzini@redhat.com
Subject: [PATCH v14 20/25] x86/tsc: calibrate tsc only once
Date: Tue, 17 Jul 2018 22:22:06 -0400	[thread overview]
Message-ID: <20180718022211.6259-21-pasha.tatashin@oracle.com> (raw)
In-Reply-To: <20180718022211.6259-1-pasha.tatashin@oracle.com>

During boot tsc is calibrated twice: once in tsc_early_delay_calibrate(),
and the second time in tsc_init().

Rename tsc_early_delay_calibrate() to tsc_early_init(), and rework it so
the calibration is done only early, and make tsc_init() to use the values
already determined in tsc_early_init().

Sometimes it is not possible to determine tsc early, as the subsystem that
is required is not yet initialized, in such case try again later in
tsc_init().

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
---
 arch/x86/include/asm/tsc.h |  2 +-
 arch/x86/kernel/setup.c    |  2 +-
 arch/x86/kernel/tsc.c      | 86 ++++++++++++++++++++------------------
 3 files changed, 48 insertions(+), 42 deletions(-)

diff --git a/arch/x86/include/asm/tsc.h b/arch/x86/include/asm/tsc.h
index 2701d221583a..c4368ff73652 100644
--- a/arch/x86/include/asm/tsc.h
+++ b/arch/x86/include/asm/tsc.h
@@ -33,7 +33,7 @@ static inline cycles_t get_cycles(void)
 extern struct system_counterval_t convert_art_to_tsc(u64 art);
 extern struct system_counterval_t convert_art_ns_to_tsc(u64 art_ns);
 
-extern void tsc_early_delay_calibrate(void);
+extern void tsc_early_init(void);
 extern void tsc_init(void);
 extern void mark_tsc_unstable(char *reason);
 extern int unsynchronized_tsc(void);
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 7490de925a81..5d32c55aeb8b 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -1014,6 +1014,7 @@ void __init setup_arch(char **cmdline_p)
 	 */
 	init_hypervisor_platform();
 
+	tsc_early_init();
 	x86_init.resources.probe_roms();
 
 	/* after parse_early_param, so could debug it */
@@ -1199,7 +1200,6 @@ void __init setup_arch(char **cmdline_p)
 
 	memblock_find_dma_reserve();
 
-	tsc_early_delay_calibrate();
 	if (!early_xdbc_setup_hardware())
 		early_xdbc_register_console();
 
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 186395041725..bc8eb82050a3 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -33,6 +33,8 @@ EXPORT_SYMBOL(cpu_khz);
 unsigned int __read_mostly tsc_khz;
 EXPORT_SYMBOL(tsc_khz);
 
+#define KHZ	1000
+
 /*
  * TSC can be unstable due to cpufreq or due to unsynced TSCs
  */
@@ -1335,34 +1337,10 @@ static int __init init_tsc_clocksource(void)
  */
 device_initcall(init_tsc_clocksource);
 
-void __init tsc_early_delay_calibrate(void)
-{
-	unsigned long lpj;
-
-	if (!boot_cpu_has(X86_FEATURE_TSC))
-		return;
-
-	cpu_khz = x86_platform.calibrate_cpu();
-	tsc_khz = x86_platform.calibrate_tsc();
-
-	tsc_khz = tsc_khz ? : cpu_khz;
-	if (!tsc_khz)
-		return;
-
-	lpj = tsc_khz * 1000;
-	do_div(lpj, HZ);
-	loops_per_jiffy = lpj;
-}
-
-void __init tsc_init(void)
+static bool determine_cpu_tsc_frequncies(void)
 {
-	u64 lpj, cyc;
-	int cpu;
-
-	if (!boot_cpu_has(X86_FEATURE_TSC)) {
-		setup_clear_cpu_cap(X86_FEATURE_TSC_DEADLINE_TIMER);
-		return;
-	}
+	/* Make sure that cpu and tsc are not already calibrated */
+	WARN_ON(cpu_khz || tsc_khz);
 
 	cpu_khz = x86_platform.calibrate_cpu();
 	tsc_khz = x86_platform.calibrate_tsc();
@@ -1377,20 +1355,51 @@ void __init tsc_init(void)
 	else if (abs(cpu_khz - tsc_khz) * 10 > tsc_khz)
 		cpu_khz = tsc_khz;
 
-	if (!tsc_khz) {
-		mark_tsc_unstable("could not calculate TSC khz");
-		setup_clear_cpu_cap(X86_FEATURE_TSC_DEADLINE_TIMER);
-		return;
-	}
+	if (tsc_khz == 0)
+		return false;
 
 	pr_info("Detected %lu.%03lu MHz processor\n",
-		(unsigned long)cpu_khz / 1000,
-		(unsigned long)cpu_khz % 1000);
+		(unsigned long)cpu_khz / KHZ,
+		(unsigned long)cpu_khz % KHZ);
 
 	if (cpu_khz != tsc_khz) {
 		pr_info("Detected %lu.%03lu MHz TSC",
-			(unsigned long)tsc_khz / 1000,
-			(unsigned long)tsc_khz % 1000);
+			(unsigned long)tsc_khz / KHZ,
+			(unsigned long)tsc_khz % KHZ);
+	}
+	return true;
+}
+
+static unsigned long get_loops_per_jiffy(void)
+{
+	unsigned long lpj = tsc_khz * KHZ;
+
+	do_div(lpj, HZ);
+	return lpj;
+}
+
+void __init tsc_early_init(void)
+{
+	if (!boot_cpu_has(X86_FEATURE_TSC))
+		return;
+	if (!determine_cpu_tsc_frequncies())
+		return;
+	loops_per_jiffy = get_loops_per_jiffy();
+}
+
+void __init tsc_init(void)
+{
+	if (!boot_cpu_has(X86_FEATURE_TSC)) {
+		setup_clear_cpu_cap(X86_FEATURE_TSC_DEADLINE_TIMER);
+		return;
+	}
+
+	if (!tsc_khz) {
+		/* We failed to determine frequencies earlier, try again */
+		if (!determine_cpu_tsc_frequncies()) {
+			mark_tsc_unstable("could not calculate TSC khz");
+			return;
+		}
 	}
 
 	/* Sanitize TSC ADJUST before cyc2ns gets initialized */
@@ -1413,10 +1422,7 @@ void __init tsc_init(void)
 	if (!no_sched_irq_time)
 		enable_sched_clock_irqtime();
 
-	lpj = ((u64)tsc_khz * 1000);
-	do_div(lpj, HZ);
-	lpj_fine = lpj;
-
+	lpj_fine = get_loops_per_jiffy();
 	use_tsc_delay();
 
 	check_system_tsc_reliable();
-- 
2.18.0


  parent reply	other threads:[~2018-07-18  2:25 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-18  2:21 [PATCH v14 00/25] Early boot time stamps Pavel Tatashin
2018-07-18  2:21 ` [PATCH v14 01/25] x86/kvmclock: Remove memblock dependency Pavel Tatashin
2018-07-18  2:21 ` [PATCH v14 02/25] x86/kvmclock: Remove page size requirement from wall_clock Pavel Tatashin
2018-07-18  2:21 ` [PATCH v14 03/25] x86/kvmclock: Decrapify kvm_register_clock() Pavel Tatashin
2018-07-18  2:21 ` [PATCH v14 04/25] x86/kvmclock: Cleanup the code Pavel Tatashin
2018-07-18  2:21 ` [PATCH v14 05/25] x86/kvmclock: Mark variables __initdata and __ro_after_init Pavel Tatashin
2018-07-18  2:21 ` [PATCH v14 06/25] x86/kvmclock: Move kvmclock vsyscall param and init to kvmclock Pavel Tatashin
2018-07-18  2:21 ` [PATCH v14 07/25] x86/kvmclock: Switch kvmclock data to a PER_CPU variable Pavel Tatashin
2018-07-18  2:21 ` [PATCH v14 08/25] x86/kvmclock: Avoid TSC recalibration Pavel Tatashin
2018-07-18 11:14   ` Paolo Bonzini
2018-07-18 13:33     ` Pavel Tatashin
2018-07-18  2:21 ` [PATCH v14 09/25] x86: text_poke() may access uninitialized struct pages Pavel Tatashin
2018-07-18  2:21 ` [PATCH v14 10/25] x86: initialize static branching early Pavel Tatashin
2018-07-18  2:21 ` [PATCH v14 11/25] x86/CPU: Call detect_nopl() only on the BSP Pavel Tatashin
2018-07-18  2:21 ` [PATCH v14 12/25] x86/tsc: redefine notsc to behave as tsc=unstable Pavel Tatashin
2018-07-18  2:21 ` [PATCH v14 13/25] x86/xen/time: initialize pv xen time in init_hypervisor_platform Pavel Tatashin
2018-07-18  2:22 ` [PATCH v14 14/25] x86/xen/time: output xen sched_clock time from 0 Pavel Tatashin
2018-07-18  2:22 ` [PATCH v14 15/25] s390/time: add read_persistent_wall_and_boot_offset() Pavel Tatashin
2018-07-18  2:22 ` [PATCH v14 16/25] time: replace read_boot_clock64() with read_persistent_wall_and_boot_offset() Pavel Tatashin
2018-07-18  2:22 ` [PATCH v14 17/25] time: default boot time offset to local_clock() Pavel Tatashin
2018-07-18  2:22 ` [PATCH v14 18/25] s390/time: remove read_boot_clock64() Pavel Tatashin
2018-07-18  2:22 ` [PATCH v14 19/25] ARM/time: " Pavel Tatashin
2018-07-18  2:22 ` Pavel Tatashin [this message]
2018-07-19  5:33   ` [PATCH v14 20/25] x86/tsc: calibrate tsc only once Dou Liyang
2018-07-19  6:25     ` Thomas Gleixner
2018-07-19  6:48       ` Dou Liyang
2018-07-19 10:33   ` Peter Zijlstra
2018-07-19 11:01     ` Thomas Gleixner
2018-07-19 15:58       ` Pavel Tatashin
2018-07-19 16:19         ` Thomas Gleixner
2018-07-19 16:49           ` Pavel Tatashin
2018-07-19 18:38             ` Pavel Tatashin
2018-07-19 20:44               ` Thomas Gleixner
2018-07-19 20:46                 ` Pavel Tatashin
2018-07-23  9:28                   ` Alan Cox
2018-07-18  2:22 ` [PATCH v14 21/25] x86/tsc: initialize cyc2ns when tsc freq. is determined Pavel Tatashin
2018-07-18  2:22 ` [PATCH v14 22/25] x86/tsc: use tsc early Pavel Tatashin
2018-07-18  2:22 ` [PATCH v14 23/25] sched: move sched clock initialization and merge with generic clock Pavel Tatashin
2018-07-18  2:22 ` [PATCH v14 24/25] sched: early boot clock Pavel Tatashin
2018-07-19 10:39   ` Peter Zijlstra
2018-07-19 14:16     ` Pavel Tatashin
2018-07-18  2:22 ` [PATCH v14 25/25] sched: use static key for sched_clock_running Pavel Tatashin
2018-07-19 10:48   ` Peter Zijlstra
2018-07-19 14:24     ` Pavel Tatashin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180718022211.6259-21-pasha.tatashin@oracle.com \
    --to=pasha.tatashin@oracle.com \
    --cc=boris.ostrovsky@oracle.com \
    --cc=daniel.m.jordan@oracle.com \
    --cc=douly.fnst@cn.fujitsu.com \
    --cc=feng.tang@intel.com \
    --cc=gnomes@lxorguk.ukuu.org.uk \
    --cc=heiko.carstens@de.ibm.com \
    --cc=hpa@zytor.com \
    --cc=jgross@suse.com \
    --cc=john.stultz@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-s390@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mingo@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=peterz@infradead.org \
    --cc=pmladek@suse.com \
    --cc=prarit@redhat.com \
    --cc=sboyd@codeaurora.org \
    --cc=schwidefsky@de.ibm.com \
    --cc=steven.sistare@oracle.com \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).