From: Balakrishna Godavarthi <bgodavar@codeaurora.org>
To: marcel@holtmann.org, johan.hedberg@gmail.com, mka@chromium.org
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-bluetooth@vger.kernel.org, thierry.escande@linaro.org,
rtatiya@codeaurora.org, hemantg@codeaurora.org,
linux-arm-msm@vger.kernel.org,
Balakrishna Godavarthi <bgodavar@codeaurora.org>
Subject: [PATCH v15 3/7] Bluetooth: btqca: Redefine qca_uart_setup() to generic function.
Date: Fri, 3 Aug 2018 17:46:28 +0530 [thread overview]
Message-ID: <20180803121632.30689-4-bgodavar@codeaurora.org> (raw)
In-Reply-To: <20180803121632.30689-1-bgodavar@codeaurora.org>
Redefinition of qca_uart_setup will help future Qualcomm Bluetooth
SoC, to use the same function instead of duplicating the function.
Added new arguments soc_type and soc_ver to the functions.
These arguments will help to decide type of firmware files
to be loaded into Bluetooth chip.
soc_type holds the Bluetooth chip connected to APPS processor.
soc_ver holds the Bluetooth chip version.
Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
---
drivers/bluetooth/btqca.c | 21 ++++++++-------------
drivers/bluetooth/btqca.h | 13 +++++++++++--
drivers/bluetooth/hci_qca.c | 10 +++++++++-
3 files changed, 28 insertions(+), 16 deletions(-)
diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index c5cf9cab438a..479179c54dcf 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -81,9 +81,13 @@ int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version)
*/
*soc_version = (le32_to_cpu(ver->soc_id) << 16) |
(le16_to_cpu(ver->rome_ver) & 0x0000ffff);
+ if (*soc_version == 0)
+ err = -EILSEQ;
out:
kfree_skb(skb);
+ if (err)
+ bt_dev_err(hdev, "QCA Failed to get version (%d)", err);
return err;
}
@@ -327,9 +331,9 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
}
EXPORT_SYMBOL_GPL(qca_set_bdaddr_rome);
-int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate)
+int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
+ enum qca_btsoc_type soc_type, u32 soc_ver)
{
- u32 rome_ver = 0;
struct rome_config config;
int err;
@@ -337,19 +341,10 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate)
config.user_baud_rate = baudrate;
- /* Get QCA version information */
- err = qca_read_soc_version(hdev, &rome_ver);
- if (err < 0 || rome_ver == 0) {
- bt_dev_err(hdev, "QCA Failed to get version %d", err);
- return err;
- }
-
- bt_dev_info(hdev, "QCA controller version 0x%08x", rome_ver);
-
/* Download rampatch file */
config.type = TLV_TYPE_PATCH;
snprintf(config.fwname, sizeof(config.fwname), "qca/rampatch_%08x.bin",
- rome_ver);
+ soc_ver);
err = qca_download_firmware(hdev, &config);
if (err < 0) {
bt_dev_err(hdev, "QCA Failed to download patch (%d)", err);
@@ -359,7 +354,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate)
/* Download NVM configuration */
config.type = TLV_TYPE_NVM;
snprintf(config.fwname, sizeof(config.fwname), "qca/nvm_%08x.bin",
- rome_ver);
+ soc_ver);
err = qca_download_firmware(hdev, &config);
if (err < 0) {
bt_dev_err(hdev, "QCA Failed to download NVM (%d)", err);
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index 5c9851b11838..a9c2779f3e07 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -124,10 +124,18 @@ struct tlv_type_hdr {
__u8 data[0];
} __packed;
+enum qca_btsoc_type {
+ QCA_INVALID = -1,
+ QCA_AR3002,
+ QCA_ROME,
+ QCA_WCN3990
+};
+
#if IS_ENABLED(CONFIG_BT_QCA)
int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr);
-int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate);
+int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
+ enum qca_btsoc_type soc_type, u32 soc_ver);
int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version);
#else
@@ -137,7 +145,8 @@ static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdad
return -EOPNOTSUPP;
}
-static inline int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate)
+static inline int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
+ enum qca_btsoc_type soc_type, u32 soc_ver)
{
return -EOPNOTSUPP;
}
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index d7b60669b656..5f1c0a8fd5cd 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -929,6 +929,7 @@ static int qca_setup(struct hci_uart *hu)
struct qca_data *qca = hu->priv;
unsigned int speed, qca_baudrate = QCA_BAUDRATE_115200;
int ret;
+ int soc_ver = 0;
bt_dev_info(hdev, "ROME setup");
@@ -965,8 +966,15 @@ static int qca_setup(struct hci_uart *hu)
host_set_baudrate(hu, speed);
}
+ /* Get QCA version information */
+ ret = qca_read_soc_version(hdev, &soc_ver);
+ if (ret)
+ return ret;
+
+ bt_dev_info(hdev, "QCA controller version 0x%08x", soc_ver);
+
/* Setup patch / NVM configurations */
- ret = qca_uart_setup(hdev, qca_baudrate);
+ ret = qca_uart_setup(hdev, qca_baudrate, QCA_ROME, soc_ver);
if (!ret) {
set_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
qca_debugfs_init(hdev);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2018-08-03 12:16 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-03 12:16 [PATCH v15 0/7] Enable Bluetooth functionality for WCN3990 Balakrishna Godavarthi
2018-08-03 12:16 ` [PATCH v15 1/7] dt-bindings: net: bluetooth: Add device tree bindings for QTI chip wcn3990 Balakrishna Godavarthi
2018-08-03 12:16 ` [PATCH v15 2/7] Bluetooth: btqca: Rename ROME specific functions to generic functions Balakrishna Godavarthi
2018-08-03 12:16 ` Balakrishna Godavarthi [this message]
2018-08-03 12:16 ` [PATCH v15 4/7] Bluetooth: hci_qca: Add wrapper functions for setting UART speed Balakrishna Godavarthi
2018-08-03 12:16 ` [PATCH v15 5/7] Bluetooth: hci_qca: Enable 3.2 Mbps operating speed Balakrishna Godavarthi
2018-08-03 12:16 ` [PATCH v15 6/7] Bluetooth: btqca: Add wcn3990 firmware download support Balakrishna Godavarthi
2018-08-03 12:16 ` [PATCH v15 7/7] Bluetooth: hci_qca: Add support for Qualcomm Bluetooth chip wcn3990 Balakrishna Godavarthi
2018-08-03 12:46 ` [PATCH v15 0/7] Enable Bluetooth functionality for WCN3990 Marcel Holtmann
2018-08-03 13:49 ` Balakrishna Godavarthi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180803121632.30689-4-bgodavar@codeaurora.org \
--to=bgodavar@codeaurora.org \
--cc=devicetree@vger.kernel.org \
--cc=hemantg@codeaurora.org \
--cc=johan.hedberg@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=mka@chromium.org \
--cc=rtatiya@codeaurora.org \
--cc=thierry.escande@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).