From: Richard Fitzgerald <rf@opensource.cirrus.com>
To: <lee.jones@linaro.org>
Cc: <patches@opensource.cirrus.com>, <linux-kernel@vger.kernel.org>,
"Richard Fitzgerald" <rf@opensource.cirrus.com>
Subject: [PATCH 1/2] mfd: madera: Add register definitions for accessory detect
Date: Tue, 7 Aug 2018 10:08:12 +0100 [thread overview]
Message-ID: <20180807090813.15695-1-rf@opensource.cirrus.com> (raw)
Add some register definitions for accessory detection, used
by the extcon driver.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
---
include/linux/mfd/madera/registers.h | 51 ++++++++++++++++++++++++++++++++++++
1 file changed, 51 insertions(+)
diff --git a/include/linux/mfd/madera/registers.h b/include/linux/mfd/madera/registers.h
index a6b7c4222c5e..977e06101711 100644
--- a/include/linux/mfd/madera/registers.h
+++ b/include/linux/mfd/madera/registers.h
@@ -1219,9 +1219,11 @@
#define MADERA_IRQ1_STATUS_33 0x1820
#define MADERA_IRQ1_MASK_1 0x1840
#define MADERA_IRQ1_MASK_2 0x1841
+#define MADERA_IRQ1_MASK_6 0x1845
#define MADERA_IRQ1_MASK_33 0x1860
#define MADERA_IRQ1_RAW_STATUS_1 0x1880
#define MADERA_IRQ1_RAW_STATUS_2 0x1881
+#define MADERA_IRQ1_RAW_STATUS_7 0x1886
#define MADERA_IRQ1_RAW_STATUS_15 0x188E
#define MADERA_IRQ1_RAW_STATUS_33 0x18A0
#define MADERA_INTERRUPT_DEBOUNCE_7 0x1A06
@@ -1664,6 +1666,42 @@
#define MADERA_MICB2A_ENA_SHIFT 0
#define MADERA_MICB2A_ENA_WIDTH 1
+/* (0x0225) - HP Ctrl 1L */
+#define MADERA_RMV_SHRT_HP1L 0x4000
+#define MADERA_RMV_SHRT_HP1L_MASK 0x4000
+#define MADERA_RMV_SHRT_HP1L_SHIFT 14
+#define MADERA_RMV_SHRT_HP1L_WIDTH 1
+#define MADERA_HP1L_FLWR 0x0004
+#define MADERA_HP1L_FLWR_MASK 0x0004
+#define MADERA_HP1L_FLWR_SHIFT 2
+#define MADERA_HP1L_FLWR_WIDTH 1
+#define MADERA_HP1L_SHRTI 0x0002
+#define MADERA_HP1L_SHRTI_MASK 0x0002
+#define MADERA_HP1L_SHRTI_SHIFT 1
+#define MADERA_HP1L_SHRTI_WIDTH 1
+#define MADERA_HP1L_SHRTO 0x0001
+#define MADERA_HP1L_SHRTO_MASK 0x0001
+#define MADERA_HP1L_SHRTO_SHIFT 0
+#define MADERA_HP1L_SHRTO_WIDTH 1
+
+/* (0x0226) - HP Ctrl 1R */
+#define MADERA_RMV_SHRT_HP1R 0x4000
+#define MADERA_RMV_SHRT_HP1R_MASK 0x4000
+#define MADERA_RMV_SHRT_HP1R_SHIFT 14
+#define MADERA_RMV_SHRT_HP1R_WIDTH 1
+#define MADERA_HP1R_FLWR 0x0004
+#define MADERA_HP1R_FLWR_MASK 0x0004
+#define MADERA_HP1R_FLWR_SHIFT 2
+#define MADERA_HP1R_FLWR_WIDTH 1
+#define MADERA_HP1R_SHRTI 0x0002
+#define MADERA_HP1R_SHRTI_MASK 0x0002
+#define MADERA_HP1R_SHRTI_SHIFT 1
+#define MADERA_HP1R_SHRTI_WIDTH 1
+#define MADERA_HP1R_SHRTO 0x0001
+#define MADERA_HP1R_SHRTO_MASK 0x0001
+#define MADERA_HP1R_SHRTO_SHIFT 0
+#define MADERA_HP1R_SHRTO_WIDTH 1
+
/* (0x0293) Accessory_Detect_Mode_1 */
#define MADERA_ACCDET_SRC 0x2000
#define MADERA_ACCDET_SRC_MASK 0x2000
@@ -3766,6 +3804,19 @@
#define MADERA_DSP1_BUS_ERR_EINT1_SHIFT 0
#define MADERA_DSP1_BUS_ERR_EINT1_WIDTH 1
+/* (0x1845) IRQ1_Mask_6 */
+#define MADERA_IM_MICDET2_EINT1 0x0200
+#define MADERA_IM_MICDET2_EINT1_MASK 0x0200
+#define MADERA_IM_MICDET2_EINT1_SHIFT 9
+#define MADERA_IM_MICDET2_EINT1_WIDTH 1
+#define MADERA_IM_MICDET1_EINT1 0x0100
+#define MADERA_IM_MICDET1_EINT1_MASK 0x0100
+#define MADERA_IM_MICDET1_EINT1_SHIFT 8
+#define MADERA_IM_MICDET1_EINT1_WIDTH 1
+#define MADERA_IM_HPDET_EINT1 0x0001
+#define MADERA_IM_HPDET_EINT1_MASK 0x0001
+#define MADERA_IM_HPDET_EINT1_SHIFT 0
+#define MADERA_IM_HPDET_EINT1_WIDTH 1
/* (0x184E) IRQ1_Mask_15 */
#define MADERA_IM_SPK_OVERHEAT_WARN_EINT1 0x0004
#define MADERA_IM_SPK_OVERHEAT_WARN_EINT1_MASK 0x0004
--
2.11.0
next reply other threads:[~2018-08-07 9:08 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-07 9:08 Richard Fitzgerald [this message]
2018-08-07 9:08 ` [PATCH 2/2] mfd: madera: Don't use regmap_read_poll_timeout to poll for BOOT_DONE Richard Fitzgerald
2018-08-16 9:12 ` Lee Jones
2018-08-16 9:12 ` [PATCH 1/2] mfd: madera: Add register definitions for accessory detect Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180807090813.15695-1-rf@opensource.cirrus.com \
--to=rf@opensource.cirrus.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).