LKML Archive on lore.kernel.org
 help / Atom feed
From: Michael Straube <straube.linux@gmail.com>
To: gregkh@linuxfoundation.org
Cc: devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org,
	Michael Straube <straube.linux@gmail.com>
Subject: [PATCH v2 1/5] staging: rtl8188eu: use is_multicast_ether_addr in rtw_security.c
Date: Fri, 10 Aug 2018 09:18:29 +0200
Message-ID: <20180810071833.1661-1-straube.linux@gmail.com> (raw)

Use is_multicast_ether_addr instead of custom IS_MCAST in
core/rtw_security.c. In all uses the address array is properly
aligned.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
---
v2: checked that in all uses of is_multicast_ether_addr
    the address array/memory is properly aligned and
    updated the commit messages

 drivers/staging/rtl8188eu/core/rtw_security.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/rtl8188eu/core/rtw_security.c b/drivers/staging/rtl8188eu/core/rtw_security.c
index 2a48b09ea9ae..a2ec0e403718 100644
--- a/drivers/staging/rtl8188eu/core/rtw_security.c
+++ b/drivers/staging/rtl8188eu/core/rtw_security.c
@@ -608,7 +608,7 @@ u32	rtw_tkip_encrypt(struct adapter *padapter, u8 *pxmitframe)
 		if (stainfo != NULL) {
 			RT_TRACE(_module_rtl871x_security_c_, _drv_err_, ("%s: stainfo!= NULL!!!\n", __func__));
 
-			if (IS_MCAST(pattrib->ra))
+			if (is_multicast_ether_addr(pattrib->ra))
 				prwskey = psecuritypriv->dot118021XGrpKey[psecuritypriv->dot118021XGrpKeyid].skey;
 			else
 				prwskey = &stainfo->dot118021x_UncstKey.skey[0];
@@ -678,7 +678,7 @@ u32 rtw_tkip_decrypt(struct adapter *padapter, u8 *precvframe)
 	if (prxattrib->encrypt == _TKIP_) {
 		stainfo = rtw_get_stainfo(&padapter->stapriv, &prxattrib->ta[0]);
 		if (stainfo) {
-			if (IS_MCAST(prxattrib->ra)) {
+			if (is_multicast_ether_addr(prxattrib->ra)) {
 				if (!psecuritypriv->binstallGrpkey) {
 					res = _FAIL;
 					DBG_88E("%s:rx bc/mc packets, but didn't install group key!!!!!!!!!!\n", __func__);
@@ -1250,7 +1250,7 @@ u32	rtw_aes_encrypt(struct adapter *padapter, u8 *pxmitframe)
 		if (stainfo) {
 			RT_TRACE(_module_rtl871x_security_c_, _drv_err_, ("%s: stainfo!= NULL!!!\n", __func__));
 
-			if (IS_MCAST(pattrib->ra))
+			if (is_multicast_ether_addr(pattrib->ra))
 				prwskey = psecuritypriv->dot118021XGrpKey[psecuritypriv->dot118021XGrpKeyid].skey;
 			else
 				prwskey = &stainfo->dot118021x_UncstKey.skey[0];
@@ -1296,7 +1296,7 @@ u32 rtw_aes_decrypt(struct adapter *padapter, u8 *precvframe)
 			struct security_priv *psecuritypriv = &padapter->securitypriv;
 			char iv[8], icv[8];
 
-			if (IS_MCAST(prxattrib->ra)) {
+			if (is_multicast_ether_addr(prxattrib->ra)) {
 				/* in concurrent we should use sw descrypt in group key, so we remove this message */
 				if (!psecuritypriv->binstallGrpkey) {
 					res = _FAIL;
-- 
2.18.0


             reply index

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-10  7:18 Michael Straube [this message]
2018-08-10  7:18 ` [PATCH v2 2/5] staging: rtl8188eu: use is_multicast_ether_addr in rtw_recv.c Michael Straube
2018-08-10  7:18 ` [PATCH v2 3/5] staging: rtl8188eu: use is_multicast_ether_addr in rtw_xmit.c Michael Straube
2018-08-10  7:18 ` [PATCH v2 4/5] staging: rtl8188eu: remove unused IS_MCAST Michael Straube
2018-08-10  7:18 ` [PATCH v2 5/5] staging: rtl8188eu: use phydm_reg.h from rtlwifi Michael Straube
2018-08-10  9:44   ` Dan Carpenter
2018-08-10 10:44     ` Michael Straube

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180810071833.1661-1-straube.linux@gmail.com \
    --to=straube.linux@gmail.com \
    --cc=devel@driverdev.osuosl.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org linux-kernel@archiver.kernel.org
	public-inbox-index lkml


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox