LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Bartosz Golaszewski <brgl@bgdev.pl>
To: Jonathan Corbet <corbet@lwn.net>, Sekhar Nori <nsekhar@ti.com>,
	Kevin Hilman <khilman@kernel.org>,
	Russell King <linux@armlinux.org.uk>,
	Arnd Bergmann <arnd@arndb.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Boris Brezillon <boris.brezillon@bootlin.com>,
	Marek Vasut <marek.vasut@gmail.com>,
	Richard Weinberger <richard@nod.at>,
	Grygorii Strashko <grygorii.strashko@ti.com>,
	"David S . Miller" <davem@davemloft.net>,
	Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
	Naren <naren.kernel@gmail.com>,
	Mauro Carvalho Chehab <mchehab+samsung@kernel.org>,
	Andrew Morton <akpm@linux-foundation.org>,
	Lukas Wunner <lukas@wunner.de>,
	Dan Carpenter <dan.carpenter@oracle.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>,
	Sven Van Asbroeck <svendev@arcx.com>,
	Paolo Abeni <pabeni@redhat.com>, Alban Bedel <albeu@free.fr>,
	Rob Herring <robh@kernel.org>,
	David Lechner <david@lechnology.com>,
	Andrew Lunn <andrew@lunn.ch>
Cc: linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-i2c@vger.kernel.org,
	linux-mtd@lists.infradead.org, linux-omap@vger.kernel.org,
	netdev@vger.kernel.org,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>
Subject: [PATCH v2 29/29] eeprom: at24: kill at24_platform_data
Date: Fri, 10 Aug 2018 10:05:26 +0200
Message-ID: <20180810080526.27207-30-brgl@bgdev.pl> (raw)
In-Reply-To: <20180810080526.27207-1-brgl@bgdev.pl>

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

There are no more users of at24_platform_data. Remove the relevant
header and modify the driver code to not use it anymore.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---
 MAINTAINERS                        |   1 -
 drivers/misc/eeprom/at24.c         | 127 +++++++++++++----------------
 include/linux/platform_data/at24.h |  60 --------------
 3 files changed, 57 insertions(+), 131 deletions(-)
 delete mode 100644 include/linux/platform_data/at24.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 7cebd5bba8a8..8eb87a3548f8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2328,7 +2328,6 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux.git
 S:	Maintained
 F:	Documentation/devicetree/bindings/eeprom/at24.txt
 F:	drivers/misc/eeprom/at24.c
-F:	include/linux/platform_data/at24.h
 
 ATA OVER ETHERNET (AOE) DRIVER
 M:	"Ed L. Cashin" <ed.cashin@acm.org>
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index f5cc517d1131..93642b4b47c5 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -22,10 +22,24 @@
 #include <linux/i2c.h>
 #include <linux/nvmem-provider.h>
 #include <linux/regmap.h>
-#include <linux/platform_data/at24.h>
 #include <linux/pm_runtime.h>
 #include <linux/gpio/consumer.h>
 
+/* Address pointer is 16 bit. */
+#define AT24_FLAG_ADDR16	BIT(7)
+/* sysfs-entry will be read-only. */
+#define AT24_FLAG_READONLY	BIT(6)
+/* sysfs-entry will be world-readable. */
+#define AT24_FLAG_IRUGO		BIT(5)
+/* Take always 8 addresses (24c00). */
+#define AT24_FLAG_TAKE8ADDR	BIT(4)
+/* Factory-programmed serial number. */
+#define AT24_FLAG_SERIAL	BIT(3)
+/* Factory-programmed mac address. */
+#define AT24_FLAG_MAC		BIT(2)
+/* Does not auto-rollover reads to the next slave address. */
+#define AT24_FLAG_NO_RDROL	BIT(1)
+
 /*
  * I2C EEPROMs from most vendors are inexpensive and mostly interchangeable.
  * Differences between different vendor product lines (like Atmel AT24C or
@@ -124,10 +138,6 @@ MODULE_PARM_DESC(at24_write_timeout, "Time (in ms) to try writes (default 25)");
 	     usleep_range(1000, 1500), op_time = jiffies)
 
 struct at24_chip_data {
-	/*
-	 * these fields mirror their equivalents in
-	 * struct at24_platform_data
-	 */
 	u32 byte_len;
 	u8 flags;
 };
@@ -467,46 +477,11 @@ static int at24_write(void *priv, unsigned int off, void *val, size_t count)
 	return 0;
 }
 
-static void at24_properties_to_pdata(struct device *dev,
-				     struct at24_platform_data *chip)
-{
-	int err;
-	u32 val;
-
-	if (device_property_present(dev, "read-only"))
-		chip->flags |= AT24_FLAG_READONLY;
-	if (device_property_present(dev, "no-read-rollover"))
-		chip->flags |= AT24_FLAG_NO_RDROL;
-
-	err = device_property_read_u32(dev, "size", &val);
-	if (!err)
-		chip->byte_len = val;
-
-	err = device_property_read_u32(dev, "pagesize", &val);
-	if (!err) {
-		chip->page_size = val;
-	} else {
-		/*
-		 * This is slow, but we can't know all eeproms, so we better
-		 * play safe. Specifying custom eeprom-types via platform_data
-		 * is recommended anyhow.
-		 */
-		chip->page_size = 1;
-	}
-}
-
-static int at24_get_pdata(struct device *dev, struct at24_platform_data *pdata)
+static const struct at24_chip_data *at24_get_chip_data(struct device *dev)
 {
 	struct device_node *of_node = dev->of_node;
 	const struct at24_chip_data *cdata;
 	const struct i2c_device_id *id;
-	struct at24_platform_data *pd;
-
-	pd = dev_get_platdata(dev);
-	if (pd) {
-		memcpy(pdata, pd, sizeof(*pdata));
-		return 0;
-	}
 
 	id = i2c_match_id(at24_ids, to_i2c_client(dev));
 
@@ -523,13 +498,9 @@ static int at24_get_pdata(struct device *dev, struct at24_platform_data *pdata)
 		cdata = acpi_device_get_match_data(dev);
 
 	if (!cdata)
-		return -ENODEV;
+		return ERR_PTR(-ENODEV);
 
-	pdata->byte_len = cdata->byte_len;
-	pdata->flags = cdata->flags;
-	at24_properties_to_pdata(dev, pdata);
-
-	return 0;
+	return cdata;
 }
 
 static void at24_remove_dummy_clients(struct at24_data *at24)
@@ -598,8 +569,9 @@ static int at24_probe(struct i2c_client *client)
 {
 	struct regmap_config regmap_config = { };
 	struct nvmem_config nvmem_config = { };
-	struct at24_platform_data pdata = { };
+	const struct at24_chip_data *cdata;
 	struct device *dev = &client->dev;
+	u32 byte_len, page_size, flags;
 	bool i2c_fn_i2c, i2c_fn_block;
 	unsigned int i, num_addresses;
 	struct at24_data *at24;
@@ -613,35 +585,54 @@ static int at24_probe(struct i2c_client *client)
 	i2c_fn_block = i2c_check_functionality(client->adapter,
 					       I2C_FUNC_SMBUS_WRITE_I2C_BLOCK);
 
-	err = at24_get_pdata(dev, &pdata);
+	cdata = at24_get_chip_data(dev);
+	if (IS_ERR(cdata))
+		return PTR_ERR(cdata);
+
+	err = device_property_read_u32(dev, "pagesize", &page_size);
+	if (err)
+		/*
+		 * This is slow, but we can't know all eeproms, so we better
+		 * play safe. Specifying custom eeprom-types via platform_data
+		 * is recommended anyhow.
+		 */
+		page_size = 1;
+
+	flags = cdata->flags;
+	if (device_property_present(dev, "read-only"))
+		flags |= AT24_FLAG_READONLY;
+	if (device_property_present(dev, "no-read-rollover"))
+		flags |= AT24_FLAG_NO_RDROL;
+
+	err = device_property_read_u32(dev, "size", &byte_len);
 	if (err)
-		return err;
+		byte_len = cdata->byte_len;
 
 	if (!i2c_fn_i2c && !i2c_fn_block)
-		pdata.page_size = 1;
+		page_size = 1;
 
-	if (!pdata.page_size) {
+	if (!page_size) {
 		dev_err(dev, "page_size must not be 0!\n");
 		return -EINVAL;
 	}
 
-	if (!is_power_of_2(pdata.page_size))
+	if (!is_power_of_2(page_size))
 		dev_warn(dev, "page_size looks suspicious (no power of 2)!\n");
 
-	if (pdata.flags & AT24_FLAG_TAKE8ADDR)
+	if (flags & AT24_FLAG_TAKE8ADDR)
 		num_addresses = 8;
 	else
-		num_addresses =	DIV_ROUND_UP(pdata.byte_len,
-			(pdata.flags & AT24_FLAG_ADDR16) ? 65536 : 256);
+		num_addresses =	DIV_ROUND_UP(byte_len,
+			(flags & AT24_FLAG_ADDR16) ? 65536 : 256);
 
-	if ((pdata.flags & AT24_FLAG_SERIAL) && (pdata.flags & AT24_FLAG_MAC)) {
+	if ((flags & AT24_FLAG_SERIAL) && (flags & AT24_FLAG_MAC)) {
 		dev_err(dev,
 			"invalid device data - cannot have both AT24_FLAG_SERIAL & AT24_FLAG_MAC.");
 		return -EINVAL;
 	}
 
 	regmap_config.val_bits = 8;
-	regmap_config.reg_bits = (pdata.flags & AT24_FLAG_ADDR16) ? 16 : 8;
+	regmap_config.reg_bits = (flags & AT24_FLAG_ADDR16) ? 16 : 8;
 	regmap_config.disable_locking = true;
 
 	regmap = devm_regmap_init_i2c(client, &regmap_config);
@@ -654,11 +645,11 @@ static int at24_probe(struct i2c_client *client)
 		return -ENOMEM;
 
 	mutex_init(&at24->lock);
-	at24->byte_len = pdata.byte_len;
-	at24->page_size = pdata.page_size;
-	at24->flags = pdata.flags;
+	at24->byte_len = byte_len;
+	at24->page_size = page_size;
+	at24->flags = flags;
 	at24->num_addresses = num_addresses;
-	at24->offset_adj = at24_get_offset_adj(pdata.flags, pdata.byte_len);
+	at24->offset_adj = at24_get_offset_adj(flags, byte_len);
 	at24->client[0].client = client;
 	at24->client[0].regmap = regmap;
 
@@ -666,10 +657,10 @@ static int at24_probe(struct i2c_client *client)
 	if (IS_ERR(at24->wp_gpio))
 		return PTR_ERR(at24->wp_gpio);
 
-	writable = !(pdata.flags & AT24_FLAG_READONLY);
+	writable = !(flags & AT24_FLAG_READONLY);
 	if (writable) {
 		at24->write_max = min_t(unsigned int,
-					pdata.page_size, at24_io_limit);
+					page_size, at24_io_limit);
 		if (!i2c_fn_i2c && at24->write_max > I2C_SMBUS_BLOCK_MAX)
 			at24->write_max = I2C_SMBUS_BLOCK_MAX;
 	}
@@ -712,7 +703,7 @@ static int at24_probe(struct i2c_client *client)
 	nvmem_config.priv = at24;
 	nvmem_config.stride = 1;
 	nvmem_config.word_size = 1;
-	nvmem_config.size = pdata.byte_len;
+	nvmem_config.size = byte_len;
 
 	at24->nvmem = devm_nvmem_register(dev, &nvmem_config);
 	if (IS_ERR(at24->nvmem)) {
@@ -721,13 +712,9 @@ static int at24_probe(struct i2c_client *client)
 	}
 
 	dev_info(dev, "%u byte %s EEPROM, %s, %u bytes/write\n",
-		 pdata.byte_len, client->name,
+		 byte_len, client->name,
 		 writable ? "writable" : "read-only", at24->write_max);
 
-	/* export data to kernel code */
-	if (pdata.setup)
-		pdata.setup(at24->nvmem, pdata.context);
-
 	return 0;
 
 err_clients:
diff --git a/include/linux/platform_data/at24.h b/include/linux/platform_data/at24.h
deleted file mode 100644
index 63507ff464ee..000000000000
--- a/include/linux/platform_data/at24.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * at24.h - platform_data for the at24 (generic eeprom) driver
- * (C) Copyright 2008 by Pengutronix
- * (C) Copyright 2012 by Wolfram Sang
- * same license as the driver
- */
-
-#ifndef _LINUX_AT24_H
-#define _LINUX_AT24_H
-
-#include <linux/types.h>
-#include <linux/nvmem-consumer.h>
-#include <linux/bitops.h>
-
-/**
- * struct at24_platform_data - data to set up at24 (generic eeprom) driver
- * @byte_len: size of eeprom in byte
- * @page_size: number of byte which can be written in one go
- * @flags: tunable options, check AT24_FLAG_* defines
- * @setup: an optional callback invoked after eeprom is probed; enables kernel
-	code to access eeprom via nvmem, see example
- * @context: optional parameter passed to setup()
- *
- * If you set up a custom eeprom type, please double-check the parameters.
- * Especially page_size needs extra care, as you risk data loss if your value
- * is bigger than what the chip actually supports!
- *
- * An example in pseudo code for a setup() callback:
- *
- * void get_mac_addr(struct nvmem_device *nvmem, void *context)
- * {
- *	u8 *mac_addr = ethernet_pdata->mac_addr;
- *	off_t offset = context;
- *
- *	// Read MAC addr from EEPROM
- *	if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN)
- *		pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
- * }
- *
- * This function pointer and context can now be set up in at24_platform_data.
- */
-
-struct at24_platform_data {
-	u32		byte_len;		/* size (sum of all addr) */
-	u16		page_size;		/* for writes */
-	u8		flags;
-#define AT24_FLAG_ADDR16	BIT(7)	/* address pointer is 16 bit */
-#define AT24_FLAG_READONLY	BIT(6)	/* sysfs-entry will be read-only */
-#define AT24_FLAG_IRUGO		BIT(5)	/* sysfs-entry will be world-readable */
-#define AT24_FLAG_TAKE8ADDR	BIT(4)	/* take always 8 addresses (24c00) */
-#define AT24_FLAG_SERIAL	BIT(3)	/* factory-programmed serial number */
-#define AT24_FLAG_MAC		BIT(2)	/* factory-programmed mac address */
-#define AT24_FLAG_NO_RDROL	BIT(1)	/* does not auto-rollover reads to */
-					/* the next slave address */
-
-	void		(*setup)(struct nvmem_device *nvmem, void *context);
-	void		*context;
-};
-
-#endif /* _LINUX_AT24_H */
-- 
2.18.0


  parent reply index

Thread overview: 92+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-10  8:04 [PATCH v2 00/29] at24: remove at24_platform_data Bartosz Golaszewski
2018-08-10  8:04 ` [PATCH v2 01/29] nvmem: add support for cell lookups Bartosz Golaszewski
2018-08-24 15:08   ` Boris Brezillon
2018-08-24 15:27     ` Andrew Lunn
2018-08-25  6:27       ` Boris Brezillon
2018-08-27  8:56         ` Bartosz Golaszewski
2018-08-27  9:00           ` Boris Brezillon
2018-08-27 13:37             ` Bartosz Golaszewski
2018-08-27 14:01               ` Boris Brezillon
2018-08-28 10:15               ` Srinivas Kandagatla
2018-08-28 11:56                 ` Bartosz Golaszewski
2018-08-28 13:45                   ` Srinivas Kandagatla
2018-08-28 14:41                     ` Bartosz Golaszewski
2018-08-28 14:48                       ` Srinivas Kandagatla
2018-08-28 14:53                       ` Boris Brezillon
2018-08-28 15:09                         ` Srinivas Kandagatla
2018-08-10  8:04 ` [PATCH v2 02/29] Documentation: nvmem: document lookup entries Bartosz Golaszewski
2018-08-31 20:30   ` Brian Norris
2018-09-01 13:11     ` Bartosz Golaszewski
2018-08-10  8:05 ` [PATCH v2 03/29] nvmem: add a notifier chain Bartosz Golaszewski
2018-08-10  8:33   ` Srinivas Kandagatla
2018-08-10  8:05 ` [PATCH v2 04/29] nvmem: provide nvmem_dev_name() Bartosz Golaszewski
2018-08-10  8:10   ` Srinivas Kandagatla
2018-08-10  8:05 ` [PATCH v2 05/29] nvmem: remove the name field from struct nvmem_device Bartosz Golaszewski
2018-08-10  8:33   ` Srinivas Kandagatla
2018-08-10  8:05 ` [PATCH v2 06/29] mtd: Add support for reading MTD devices via the nvmem API Bartosz Golaszewski
2018-08-17 16:27   ` Boris Brezillon
2018-08-19 11:31     ` Alban
2018-08-19 16:46       ` Boris Brezillon
2018-08-20 10:43         ` Srinivas Kandagatla
2018-08-20 18:20           ` Boris Brezillon
2018-08-20 18:50             ` Bartosz Golaszewski
2018-08-20 19:06               ` Boris Brezillon
2018-08-20 21:27             ` Alban
2018-08-21  5:07               ` Boris Brezillon
2018-08-21  9:50             ` Srinivas Kandagatla
2018-08-21  9:56               ` Boris Brezillon
2018-08-21 10:11                 ` Srinivas Kandagatla
2018-08-21 10:43                   ` Boris Brezillon
2018-08-21 11:39               ` Alban
2018-08-21 12:00                 ` Srinivas Kandagatla
2018-08-21 13:01                   ` Boris Brezillon
2018-08-23 10:29                     ` Alban
2018-08-24 14:39                       ` Boris Brezillon
2018-08-28 10:20                       ` Srinivas Kandagatla
2018-08-20 22:53         ` Alban
2018-08-21  5:44           ` Boris Brezillon
2018-08-21  9:38             ` Srinivas Kandagatla
2018-08-21 11:31               ` Boris Brezillon
2018-08-21 13:34                 ` Srinivas Kandagatla
2018-08-21 13:37                   ` Srinivas Kandagatla
2018-08-21 13:57                     ` Boris Brezillon
2018-08-21 12:27             ` Alban
2018-08-21 12:57               ` Boris Brezillon
2018-08-21 13:57                 ` Alban
2018-08-21 14:26                   ` Boris Brezillon
2018-08-21 14:33                     ` Srinivas Kandagatla
2018-08-10  8:05 ` [PATCH v2 07/29] ARM: davinci: dm365-evm: use nvmem lookup for mac address Bartosz Golaszewski
2018-08-10  8:05 ` [PATCH v2 08/29] ARM: davinci: dm644-evm: " Bartosz Golaszewski
2018-08-10  8:05 ` [PATCH v2 09/29] ARM: davinci: dm646x-evm: " Bartosz Golaszewski
2018-08-10  8:05 ` [PATCH v2 10/29] ARM: davinci: da830-evm: " Bartosz Golaszewski
2018-08-10  8:05 ` [PATCH v2 11/29] ARM: davinci: mityomapl138: add nvmem cells lookup entries Bartosz Golaszewski
2018-08-10  8:05 ` [PATCH v2 12/29] ARM: davinci: da850-evm: use nvmem lookup for mac address Bartosz Golaszewski
2018-08-10  8:05 ` [PATCH v2 13/29] ARM: davinci: da850-evm: remove unnecessary include Bartosz Golaszewski
2018-08-10  8:05 ` [PATCH v2 14/29] net: simplify eth_platform_get_mac_address() Bartosz Golaszewski
2018-08-10 14:39   ` Andy Shevchenko
2018-08-10 16:17     ` Bartosz Golaszewski
2018-08-10  8:05 ` [PATCH v2 15/29] net: split eth_platform_get_mac_address() into subroutines Bartosz Golaszewski
2018-08-31 19:54   ` Brian Norris
2018-08-10  8:05 ` [PATCH v2 16/29] net: add support for nvmem to eth_platform_get_mac_address() Bartosz Golaszewski
2018-08-10  8:05 ` [PATCH v2 17/29] net: davinci_emac: use eth_platform_get_mac_address() Bartosz Golaszewski
2018-08-10  8:05 ` [PATCH v2 18/29] ARM: davinci: da850-evm: remove dead MTD code Bartosz Golaszewski
2018-08-10  8:05 ` [PATCH v2 19/29] ARM: davinci: mityomapl138: don't read the MAC address from machine code Bartosz Golaszewski
2018-08-10  8:05 ` [PATCH v2 20/29] ARM: davinci: dm365-evm: use device properties for at24 eeprom Bartosz Golaszewski
2018-08-10  8:05 ` [PATCH v2 21/29] ARM: davinci: da830-evm: " Bartosz Golaszewski
2018-08-10  8:05 ` [PATCH v2 22/29] ARM: davinci: dm644x-evm: " Bartosz Golaszewski
2018-08-10  8:05 ` [PATCH v2 23/29] ARM: davinci: dm646x-evm: " Bartosz Golaszewski
2018-08-10  8:05 ` [PATCH v2 24/29] ARM: davinci: sffsdr: fix the at24 eeprom device name Bartosz Golaszewski
2018-08-10  8:05 ` [PATCH v2 25/29] ARM: davinci: sffsdr: use device properties for at24 eeprom Bartosz Golaszewski
2018-08-10  8:05 ` [PATCH v2 26/29] ARM: davinci: remove dead code related to MAC address reading Bartosz Golaszewski
2018-08-10  8:05 ` [PATCH v2 27/29] ARM: davinci: mityomapl138: use nvmem notifiers Bartosz Golaszewski
2018-08-10  8:05 ` [PATCH v2 28/29] ARM: davinci: mityomapl138: use device properties for at24 eeprom Bartosz Golaszewski
2018-08-10  8:05 ` Bartosz Golaszewski [this message]
2018-08-10  8:41 ` [PATCH v2 00/29] at24: remove at24_platform_data Srinivas Kandagatla
2018-08-31 19:46 ` Brian Norris
2018-10-03 20:15   ` Bartosz Golaszewski
2018-10-03 20:30     ` Lukas Wunner
2018-10-03 21:04     ` Florian Fainelli
2018-10-04 11:06       ` Bartosz Golaszewski
2018-10-04 13:58         ` Arnd Bergmann
2018-10-04 14:35           ` Sowmini Varadhan
2018-10-04 14:38             ` Arnd Bergmann

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180810080526.27207-30-brgl@bgdev.pl \
    --to=brgl@bgdev.pl \
    --cc=akpm@linux-foundation.org \
    --cc=albeu@free.fr \
    --cc=andrew@lunn.ch \
    --cc=arnd@arndb.de \
    --cc=bgolaszewski@baylibre.com \
    --cc=boris.brezillon@bootlin.com \
    --cc=computersforpeace@gmail.com \
    --cc=corbet@lwn.net \
    --cc=dan.carpenter@oracle.com \
    --cc=davem@davemloft.net \
    --cc=david@lechnology.com \
    --cc=dwmw2@infradead.org \
    --cc=f.fainelli@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=grygorii.strashko@ti.com \
    --cc=ivan.khoronzhuk@linaro.org \
    --cc=khilman@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=lukas@wunner.de \
    --cc=marek.vasut@gmail.com \
    --cc=mchehab+samsung@kernel.org \
    --cc=naren.kernel@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=nsekhar@ti.com \
    --cc=pabeni@redhat.com \
    --cc=richard@nod.at \
    --cc=robh@kernel.org \
    --cc=srinivas.kandagatla@linaro.org \
    --cc=svendev@arcx.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org linux-kernel@archiver.kernel.org
	public-inbox-index lkml


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox