From: Alan Tull <atull@kernel.org>
To: Moritz Fischer <mdf@kernel.org>, Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <rdunlap@infradead.org>,
linux-kernel@vger.kernel.org, linux-fpga@vger.kernel.org,
linux-doc@vger.kernel.org, Alan Tull <atull@kernel.org>
Subject: [PATCH 8/8] docs: fpga: document programming fpgas using regions
Date: Tue, 14 Aug 2018 14:15:26 -0500 [thread overview]
Message-ID: <20180814191526.3247-9-atull@kernel.org> (raw)
In-Reply-To: <20180814191526.3247-1-atull@kernel.org>
Clarify the intention that interfaces and upper layers use
regions rather than managers directly.
Rearrange API documentation to better group the API functions
used to create FPGA mgr/bridge/regions and the API used for
programming FPGAs.
Signed-off-by: Alan Tull <atull@kernel.org>
---
Documentation/driver-api/fpga/fpga-bridge.rst | 38 ++-----
Documentation/driver-api/fpga/fpga-mgr.rst | 117 ++-------------------
Documentation/driver-api/fpga/fpga-programming.rst | 103 ++++++++++++++++++
Documentation/driver-api/fpga/fpga-region.rst | 92 ++++++++--------
Documentation/driver-api/fpga/index.rst | 2 +
5 files changed, 166 insertions(+), 186 deletions(-)
create mode 100644 Documentation/driver-api/fpga/fpga-programming.rst
diff --git a/Documentation/driver-api/fpga/fpga-bridge.rst b/Documentation/driver-api/fpga/fpga-bridge.rst
index ebbcbde..71c5a40 100644
--- a/Documentation/driver-api/fpga/fpga-bridge.rst
+++ b/Documentation/driver-api/fpga/fpga-bridge.rst
@@ -4,6 +4,12 @@ FPGA Bridge
API to implement a new FPGA bridge
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+* struct :c:type:`fpga_bridge` — The FPGA Bridge structure
+* struct :c:type:`fpga_bridge_ops` — Low level Bridge driver ops
+* :c:func:`devm_fpga_bridge_create()` — Allocate and init a bridge struct
+* :c:func:`fpga_bridge_register()` — Register a bridge
+* :c:func:`fpga_bridge_unregister()` — Unregister a bridge
+
.. kernel-doc:: include/linux/fpga/fpga-bridge.h
:functions: fpga_bridge
@@ -14,39 +20,7 @@ API to implement a new FPGA bridge
:functions: devm_fpga_bridge_create
.. kernel-doc:: drivers/fpga/fpga-bridge.c
- :functions: fpga_bridge_create
-
-.. kernel-doc:: drivers/fpga/fpga-bridge.c
- :functions: fpga_bridge_free
-
-.. kernel-doc:: drivers/fpga/fpga-bridge.c
:functions: fpga_bridge_register
.. kernel-doc:: drivers/fpga/fpga-bridge.c
:functions: fpga_bridge_unregister
-
-API to control an FPGA bridge
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-You probably won't need these directly. FPGA regions should handle this.
-
-.. kernel-doc:: drivers/fpga/fpga-bridge.c
- :functions: of_fpga_bridge_get
-
-.. kernel-doc:: drivers/fpga/fpga-bridge.c
- :functions: fpga_bridge_get
-
-.. kernel-doc:: drivers/fpga/fpga-bridge.c
- :functions: fpga_bridge_put
-
-.. kernel-doc:: drivers/fpga/fpga-bridge.c
- :functions: fpga_bridge_get_to_list
-
-.. kernel-doc:: drivers/fpga/fpga-bridge.c
- :functions: of_fpga_bridge_get_to_list
-
-.. kernel-doc:: drivers/fpga/fpga-bridge.c
- :functions: fpga_bridge_enable
-
-.. kernel-doc:: drivers/fpga/fpga-bridge.c
- :functions: fpga_bridge_disable
diff --git a/Documentation/driver-api/fpga/fpga-mgr.rst b/Documentation/driver-api/fpga/fpga-mgr.rst
index db8885e..1c1dc54 100644
--- a/Documentation/driver-api/fpga/fpga-mgr.rst
+++ b/Documentation/driver-api/fpga/fpga-mgr.rst
@@ -98,67 +98,19 @@ The ops include a .state function which will determine the state the FPGA is in
and return a code of type enum fpga_mgr_states. It doesn't result in a change
in state.
-How to write an image buffer to a supported FPGA
-------------------------------------------------
-
-Some sample code::
-
- #include <linux/fpga/fpga-mgr.h>
-
- struct fpga_manager *mgr;
- struct fpga_image_info *info;
- int ret;
-
- /*
- * Get a reference to FPGA manager. The manager is not locked, so you can
- * hold onto this reference without it preventing programming.
- *
- * This example uses the device node of the manager. Alternatively, use
- * fpga_mgr_get(dev) instead if you have the device.
- */
- mgr = of_fpga_mgr_get(mgr_node);
-
- /* struct with information about the FPGA image to program. */
- info = fpga_image_info_alloc(dev);
-
- /* flags indicates whether to do full or partial reconfiguration */
- info->flags = FPGA_MGR_PARTIAL_RECONFIG;
-
- /*
- * At this point, indicate where the image is. This is pseudo-code; you're
- * going to use one of these three.
- */
- if (image is in a scatter gather table) {
-
- info->sgt = [your scatter gather table]
-
- } else if (image is in a buffer) {
-
- info->buf = [your image buffer]
- info->count = [image buffer size]
-
- } else if (image is in a firmware file) {
-
- info->firmware_name = devm_kstrdup(dev, firmware_name, GFP_KERNEL);
-
- }
-
- /* Get exclusive control of FPGA manager */
- ret = fpga_mgr_lock(mgr);
-
- /* Load the buffer to the FPGA */
- ret = fpga_mgr_buf_load(mgr, &info, buf, count);
-
- /* Release the FPGA manager */
- fpga_mgr_unlock(mgr);
- fpga_mgr_put(mgr);
-
- /* Deallocate the image info if you're done with it */
- fpga_image_info_free(info);
-
API for implementing a new FPGA Manager driver
----------------------------------------------
+* ``fpga_mgr_states`` — Values for :c:member:`fpga_manager->state`.
+* struct :c:type:`fpga_manager` — the FPGA manager struct
+* struct :c:type:`fpga_manager_ops` — Low level FPGA manager driver ops
+* :c:func:`devm_fpga_mgr_create` — Allocate and init a manager struct
+* :c:func:`fpga_mgr_register` — Register a FPGA manager
+* :c:func:`fpga_mgr_unregister` — Unregister a FPGA manager
+
+.. kernel-doc:: include/linux/fpga/fpga-mgr.h
+ :functions: fpga_mgr_states
+
.. kernel-doc:: include/linux/fpga/fpga-mgr.h
:functions: fpga_manager
@@ -169,56 +121,7 @@ API for implementing a new FPGA Manager driver
:functions: devm_fpga_mgr_create
.. kernel-doc:: drivers/fpga/fpga-mgr.c
- :functions: fpga_mgr_create
-
-.. kernel-doc:: drivers/fpga/fpga-mgr.c
- :functions: fpga_mgr_free
-
-.. kernel-doc:: drivers/fpga/fpga-mgr.c
:functions: fpga_mgr_register
.. kernel-doc:: drivers/fpga/fpga-mgr.c
:functions: fpga_mgr_unregister
-
-API for programming an FPGA
----------------------------
-
-FPGA Manager flags
-
-.. kernel-doc:: include/linux/fpga/fpga-mgr.h
- :doc: FPGA Manager flags
-
-.. kernel-doc:: include/linux/fpga/fpga-mgr.h
- :functions: fpga_image_info
-
-.. kernel-doc:: include/linux/fpga/fpga-mgr.h
- :functions: fpga_mgr_states
-
-.. kernel-doc:: drivers/fpga/fpga-mgr.c
- :functions: fpga_image_info_alloc
-
-.. kernel-doc:: drivers/fpga/fpga-mgr.c
- :functions: fpga_image_info_free
-
-.. kernel-doc:: drivers/fpga/fpga-mgr.c
- :functions: of_fpga_mgr_get
-
-.. kernel-doc:: drivers/fpga/fpga-mgr.c
- :functions: fpga_mgr_get
-
-.. kernel-doc:: drivers/fpga/fpga-mgr.c
- :functions: fpga_mgr_put
-
-.. kernel-doc:: drivers/fpga/fpga-mgr.c
- :functions: fpga_mgr_lock
-
-.. kernel-doc:: drivers/fpga/fpga-mgr.c
- :functions: fpga_mgr_unlock
-
-.. kernel-doc:: include/linux/fpga/fpga-mgr.h
- :functions: fpga_mgr_states
-
-Note - use :c:func:`fpga_region_program_fpga()` instead of :c:func:`fpga_mgr_load()`
-
-.. kernel-doc:: drivers/fpga/fpga-mgr.c
- :functions: fpga_mgr_load
diff --git a/Documentation/driver-api/fpga/fpga-programming.rst b/Documentation/driver-api/fpga/fpga-programming.rst
new file mode 100644
index 0000000..cc34d17
--- /dev/null
+++ b/Documentation/driver-api/fpga/fpga-programming.rst
@@ -0,0 +1,103 @@
+In-kernel API for FPGA Programming
+==================================
+
+Overview
+--------
+
+The in-kernel API for FPGA programming is a combination of APIs from
+FPGA manager, bridge, and regions. The actual function used to
+trigger FPGA programming is :c:func:`fpga_region_program_fpga()`.
+
+:c:func:`fpga_region_program_fpga()` uses functionality supplied by
+the FPGA manager and bridges. It will:
+
+ * lock the region's mutex
+ * lock the mutex of the region's FPGA manager
+ * build a list of FPGA bridges if a method has been specified to do so
+ * disable the bridges
+ * program the FPGA using info passed in :c:member:`fpga_region->info`.
+ * re-enable the bridges
+ * release the locks
+
+The struct fpga_image_info specifies what FPGA image to program. It is allocated/freed by :c:func:`fpga_image_info_alloc()` and freed with :c:func:`fpga_image_info_free()`
+
+How to program an FPGA using a region
+-------------------------------------
+
+When the FPGA region driver probed, it was given a pointer to a FPGA manager
+driver so it knows which manager to use. The region also either has a list of
+bridges to control during programming or it has a pointer to a function that
+will generate that list. Here's some sample code of what to do next::
+
+ #include <linux/fpga/fpga-mgr.h>
+ #include <linux/fpga/fpga-region.h>
+
+ struct fpga_image_info *info;
+ int ret;
+
+ /*
+ * First, alloc the struct with information about the FPGA image to
+ * program.
+ */
+ info = fpga_image_info_alloc(dev);
+ if (!info)
+ return -ENOMEM;
+
+ /* Set flags as needed, such as: */
+ info->flags = FPGA_MGR_PARTIAL_RECONFIG;
+
+ /*
+ * Indicate where the FPGA image is. This is pseudo-code; you're
+ * going to use one of these three.
+ */
+ if (image is in a scatter gather table) {
+
+ info->sgt = [your scatter gather table]
+
+ } else if (image is in a buffer) {
+
+ info->buf = [your image buffer]
+ info->count = [image buffer size]
+
+ } else if (image is in a firmware file) {
+
+ info->firmware_name = devm_kstrdup(dev, firmware_name,
+ GFP_KERNEL);
+
+ }
+
+ /* Add info to region and do the programming */
+ region->info = info;
+ ret = fpga_region_program_fpga(region);
+ if (ret)
+ return ret;
+
+ /* Deallocate the image info if you're done with it */
+ fpga_image_info_free(info);
+
+ /* Now enumerate whatever hardware has appeared in the FPGA. */
+
+API for programming an FPGA
+---------------------------
+
+* :c:func:`fpga_region_program_fpga` — Program a FPGA
+* :c:type:`fpga_image_info` — Specifies what FPGA image to program
+* :c:func:`fpga_image_info_alloc()` — Allocate a FPGA image info struct
+* :c:func:`fpga_image_info_free()` — Free a FPGA image info struct
+
+.. kernel-doc:: drivers/fpga/fpga-region.c
+ :functions: fpga_region_program_fpga
+
+FPGA Manager flags
+
+.. kernel-doc:: include/linux/fpga/fpga-mgr.h
+ :doc: FPGA Manager flags
+
+.. kernel-doc:: include/linux/fpga/fpga-mgr.h
+ :functions: fpga_image_info
+
+.. kernel-doc:: drivers/fpga/fpga-mgr.c
+ :functions: fpga_image_info_alloc
+
+.. kernel-doc:: drivers/fpga/fpga-mgr.c
+ :functions: fpga_image_info_free
diff --git a/Documentation/driver-api/fpga/fpga-region.rst b/Documentation/driver-api/fpga/fpga-region.rst
index dc9f75c..90d95bb 100644
--- a/Documentation/driver-api/fpga/fpga-region.rst
+++ b/Documentation/driver-api/fpga/fpga-region.rst
@@ -34,41 +34,6 @@ fpga_image_info including:
* flags indicating specifics such as whether the image is for partial
reconfiguration.
-How to program an FPGA using a region
--------------------------------------
-
-First, allocate the info struct::
-
- info = fpga_image_info_alloc(dev);
- if (!info)
- return -ENOMEM;
-
-Set flags as needed, i.e.::
-
- info->flags |= FPGA_MGR_PARTIAL_RECONFIG;
-
-Point to your FPGA image, such as::
-
- info->sgt = &sgt;
-
-Add info to region and do the programming::
-
- region->info = info;
- ret = fpga_region_program_fpga(region);
-
-:c:func:`fpga_region_program_fpga()` operates on info passed in the
-fpga_image_info (region->info). This function will attempt to:
-
- * lock the region's mutex
- * lock the region's FPGA manager
- * build a list of FPGA bridges if a method has been specified to do so
- * disable the bridges
- * program the FPGA
- * re-enable the bridges
- * release the locks
-
-Then you will want to enumerate whatever hardware has appeared in the FPGA.
-
How to add a new FPGA region
----------------------------
@@ -77,15 +42,36 @@ An example of usage can be seen in the probe function of [#f2]_.
.. [#f1] ../devicetree/bindings/fpga/fpga-region.txt
.. [#f2] ../../drivers/fpga/of-fpga-region.c
-API to program an FPGA
-----------------------
-
-.. kernel-doc:: drivers/fpga/fpga-region.c
- :functions: fpga_region_program_fpga
-
API to add a new FPGA region
----------------------------
+* struct :c:type:`fpga_region` — The FPGA region struct
+* :c:func:`devm_fpga_region_create` — Allocate and init a region struct
+* :c:func:`fpga_region_register` — Register a FPGA region
+* :c:func:`fpga_region_unregister` — Unregister a FPGA region
+
+The FPGA region's probe function will need to get a reference to the FPGA
+Manager it will be using to do the programming. This usually would happen
+during the region's probe function.
+
+* :c:func:`fpga_mgr_get` — Get a reference to a FPGA manager, raise ref count
+* :c:func:`of_fpga_mgr_get` — Get a reference to a FPGA manager, raise ref count,
+ given a device node.
+* :c:func:`fpga_mgr_put` — Put a FPGA manager
+
+The FPGA region will need to specify which bridges to control while programming
+the FPGA. The region driver can build a list of bridges during probe time
+(:c:member:`fpga_region->bridge_list`) or it can have a function that creates
+the list of bridges to program just before programming
+(:c:member:`fpga_region->get_bridges`). The FPGA bridge framework supplies the
+following APIs to handle building or tearing down that list.
+
+* :c:func:`fpga_bridge_get_to_list` — Get a ref of a FPGA bridge, add it to a
+ list
+* :c:func:`of_fpga_bridge_get_to_list` — Get a ref of a FPGA bridge, add it to a
+ list, given a device node
+* :c:func:`fpga_bridges_put` — Given a list of bridges, put them
+
.. kernel-doc:: include/linux/fpga/fpga-region.h
:functions: fpga_region
@@ -93,13 +79,25 @@ API to add a new FPGA region
:functions: devm_fpga_region_create
.. kernel-doc:: drivers/fpga/fpga-region.c
- :functions: fpga_region_create
-
-.. kernel-doc:: drivers/fpga/fpga-region.c
- :functions: fpga_region_free
-
-.. kernel-doc:: drivers/fpga/fpga-region.c
:functions: fpga_region_register
.. kernel-doc:: drivers/fpga/fpga-region.c
:functions: fpga_region_unregister
+
+.. kernel-doc:: drivers/fpga/fpga-mgr.c
+ :functions: fpga_mgr_get
+
+.. kernel-doc:: drivers/fpga/fpga-mgr.c
+ :functions: of_fpga_mgr_get
+
+.. kernel-doc:: drivers/fpga/fpga-mgr.c
+ :functions: fpga_mgr_put
+
+.. kernel-doc:: drivers/fpga/fpga-bridge.c
+ :functions: fpga_bridge_get_to_list
+
+.. kernel-doc:: drivers/fpga/fpga-bridge.c
+ :functions: of_fpga_bridge_get_to_list
+
+.. kernel-doc:: drivers/fpga/fpga-bridge.c
+ :functions: fpga_bridges_put
diff --git a/Documentation/driver-api/fpga/index.rst b/Documentation/driver-api/fpga/index.rst
index c51e5eb..31a4773 100644
--- a/Documentation/driver-api/fpga/index.rst
+++ b/Documentation/driver-api/fpga/index.rst
@@ -11,3 +11,5 @@ FPGA Subsystem
fpga-mgr
fpga-bridge
fpga-region
+ fpga-programming
+
--
2.7.4
next prev parent reply other threads:[~2018-08-14 19:15 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-14 19:15 [PATCH 0/8] fpga: Add managed create in FPGA API Alan Tull
2018-08-14 19:15 ` [PATCH 1/8] fpga: do not access region struct after fpga_region_unregister Alan Tull
2018-08-14 19:15 ` [PATCH 2/8] fpga: mgr: add devm_fpga_mgr_create Alan Tull
2018-08-14 19:15 ` [PATCH 3/8] fpga: bridge: add devm_fpga_bridge_create Alan Tull
2018-08-14 19:15 ` [PATCH 4/8] fpga: add devm_fpga_region_create Alan Tull
2018-08-14 19:15 ` [PATCH 5/8] dt-bindings: fpga: fix freeze controller compatible in region doc Alan Tull
2018-08-14 19:15 ` [PATCH 6/8] fpga: bridge: fix obvious function documentation error Alan Tull
2018-08-14 19:15 ` [PATCH 7/8] docs: fpga: document fpga manager flags Alan Tull
2018-08-16 19:02 ` Moritz Fischer
2018-08-16 20:20 ` Alan Tull
2018-08-16 22:01 ` Moritz Fischer
2018-08-14 19:15 ` Alan Tull [this message]
2018-08-15 2:40 ` [PATCH 8/8] docs: fpga: document programming fpgas using regions Randy Dunlap
2018-08-15 16:31 ` Alan Tull
2018-08-14 21:44 ` [PATCH 0/8] fpga: Add managed create in FPGA API Federico Vaga
2018-08-14 23:45 ` Alan Tull
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180814191526.3247-9-atull@kernel.org \
--to=atull@kernel.org \
--cc=corbet@lwn.net \
--cc=linux-doc@vger.kernel.org \
--cc=linux-fpga@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mdf@kernel.org \
--cc=rdunlap@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).