Hi all,

On Mon, 30 Jul 2018 14:37:22 +1000 Stephen Rothwell <sfr@canb.auug.org.au> wrote:
>
> Today's linux-next merge of the devicetree tree got a conflict in:
> 
>   Documentation/devicetree/bindings/net/can/xilinx_can.txt
> 
> between commit:
> 
>   7cb0f17f5252 ("dt-bindings: can: xilinx_can: add Xilinx CAN FD bindings")
> 
> from the net-next tree and commit:
> 
>   791d3ef2e111 ("dt-bindings: remove 'interrupt-parent' from bindings")
> 
> from the devicetree tree.
> 
> I fixed it up (see below) and can carry the fix as necessary. This
> is now fixed as far as linux-next is concerned, but any non trivial
> conflicts should be mentioned to your upstream maintainer when your tree
> is submitted for merging.  You may also want to consider cooperating
> with the maintainer of the conflicting tree to minimise any particularly
> complex conflicts.
> 
> -- 
> Cheers,
> Stephen Rothwell
> 
> diff --cc Documentation/devicetree/bindings/net/can/xilinx_can.txt
> index ae5c07e96ad5,9264d2f6a89d..000000000000
> --- a/Documentation/devicetree/bindings/net/can/xilinx_can.txt
> +++ b/Documentation/devicetree/bindings/net/can/xilinx_can.txt
> @@@ -2,26 -2,19 +2,25 @@@ Xilinx Axi CAN/Zynq CANPS controller De
>   ---------------------------------------------------------
>   
>   Required properties:
>  -- compatible		: Should be "xlnx,zynq-can-1.0" for Zynq CAN
>  -			  controllers and "xlnx,axi-can-1.00.a" for Axi CAN
>  -			  controllers.
>  -- reg			: Physical base address and size of the Axi CAN/Zynq
>  -			  CANPS registers map.
>  +- compatible		: Should be:
>  +			  - "xlnx,zynq-can-1.0" for Zynq CAN controllers
>  +			  - "xlnx,axi-can-1.00.a" for Axi CAN controllers
>  +			  - "xlnx,canfd-1.0" for CAN FD controllers
>  +- reg			: Physical base address and size of the controller
>  +			  registers map.
>   - interrupts		: Property with a value describing the interrupt
>   			  number.
> - - interrupt-parent	: Must be core interrupt controller
>  -- clock-names		: List of input clock names - "can_clk", "pclk"
>  -			  (For CANPS), "can_clk" , "s_axi_aclk"(For AXI CAN)
>  +- clock-names		: List of input clock names
>  +			  - "can_clk", "pclk" (For CANPS),
>  +			  - "can_clk", "s_axi_aclk" (For AXI CAN and CAN FD).
>   			  (See clock bindings for details).
>   - clocks		: Clock phandles (see clock bindings for details).
>  -- tx-fifo-depth		: Can Tx fifo depth.
>  -- rx-fifo-depth		: Can Rx fifo depth.
>  +- tx-fifo-depth		: Can Tx fifo depth (Zynq, Axi CAN).
>  +- rx-fifo-depth		: Can Rx fifo depth (Zynq, Axi CAN, CAN FD in
>  +                          sequential Rx mode).
>  +- tx-mailbox-count	: Can Tx mailbox buffer count (CAN FD).
>  +- rx-mailbox-count	: Can Rx mailbox buffer count (CAN FD in mailbox Rx
>  +			  mode).
>   
>   
>   Example:

This is now a conflict between Linus' tree and the net-next tree.

-- 
Cheers,
Stephen Rothwell