[PATCH v4 5/7] i2c: designware: add MSCC Ocelot support

From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Wolfram Sang <wsa@the-dreams.de>,
	Jarkko Nikula <jarkko.nikula@linux.intel.com>,
	James Hogan <jhogan@kernel.org>
Cc: Paul Burton <paul.burton@mips.com>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Mika Westerberg <mika.westerberg@linux.intel.com>,
	linux-i2c@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-mips@linux-mips.org,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Allan Nielsen <allan.nielsen@microsemi.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>
Subject: [PATCH v4 5/7] i2c: designware: add MSCC Ocelot support
Date: Thu, 16 Aug 2018 10:45:19 +0200	[thread overview]
Message-ID: <20180816084521.16289-6-alexandre.belloni@bootlin.com> (raw)
In-Reply-To: <20180816084521.16289-1-alexandre.belloni@bootlin.com>

The Microsemi Ocelot I2C controller is a designware IP. It also has a
second set of registers to allow tweaking SDA hold time and spike
filtering.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
 drivers/i2c/busses/i2c-designware-core.h    |  3 ++
 drivers/i2c/busses/i2c-designware-platdrv.c | 40 +++++++++++++++++++++
 2 files changed, 43 insertions(+)

diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index ad4e9619d365..f7883224e1af 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -238,6 +238,7 @@
 struct dw_i2c_dev {
 	struct device		*dev;
 	void __iomem		*base;
+	void __iomem		*ext;
 	struct completion	cmd_complete;
 	struct clk		*clk;
 	struct reset_control	*rst;
@@ -292,6 +293,8 @@ struct dw_i2c_dev {
 #define ACCESS_INTR_MASK	0x00000004
 
 #define MODEL_CHERRYTRAIL	0x00000100
+#define MODEL_MSCC_OCELOT	0x00000200
+#define MODEL_MASK		0x00000f00
 
 u32 dw_readl(struct dw_i2c_dev *dev, int offset);
 void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset);
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 776d4354f366..0d9bfa45550d 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -170,11 +170,48 @@ static inline int dw_i2c_acpi_configure(struct platform_device *pdev)
 #endif
 
 #ifdef CONFIG_OF
+#define MSCC_ICPU_CFG_TWI_DELAY		0x0
+#define MSCC_ICPU_CFG_TWI_DELAY_ENABLE	BIT(0)
+#define MSCC_ICPU_CFG_TWI_SPIKE_FILTER	0x4
+
+static int mscc_twi_set_sda_hold_time(struct dw_i2c_dev *dev)
+{
+	writel((dev->sda_hold_time << 1) | MSCC_ICPU_CFG_TWI_DELAY_ENABLE,
+	       dev->ext + MSCC_ICPU_CFG_TWI_DELAY);
+
+	return 0;
+}
+
+int dw_i2c_of_configure(struct platform_device *pdev)
+{
+	struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
+	struct resource *mem;
+
+	switch (dev->flags & MODEL_MASK) {
+	case MODEL_MSCC_OCELOT:
+		mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+		dev->ext = devm_ioremap_resource(&pdev->dev, mem);
+		if (!IS_ERR(dev->ext))
+			dev->set_sda_hold_time = mscc_twi_set_sda_hold_time;
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
 static const struct of_device_id dw_i2c_of_match[] = {
 	{ .compatible = "snps,designware-i2c", },
+	{ .compatible = "mscc,ocelot-i2c", .data = (void *)MODEL_MSCC_OCELOT },
 	{},
 };
 MODULE_DEVICE_TABLE(of, dw_i2c_of_match);
+#else
+static inline int dw_i2c_of_configure(struct platform_device *pdev)
+{
+	return -ENODEV;
+}
 #endif
 
 static void i2c_dw_configure_master(struct dw_i2c_dev *dev)
@@ -309,6 +346,9 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 
 	dev->flags |= (uintptr_t)device_get_match_data(&pdev->dev);
 
+	if (pdev->dev.of_node)
+		dw_i2c_of_configure(pdev);
+
 	if (has_acpi_companion(&pdev->dev))
 		dw_i2c_acpi_configure(pdev);
 
-- 
2.18.0

