linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH V12 00/14] Krait clocks + Krait CPUfreq
@ 2018-08-14 12:12 Sricharan R
  2018-08-14 12:12 ` [PATCH v12 01/14] ARM: Add Krait L2 register accessor functions Sricharan R
                   ` (14 more replies)
  0 siblings, 15 replies; 32+ messages in thread
From: Sricharan R @ 2018-08-14 12:12 UTC (permalink / raw)
  To: mark.rutland, robh, sudeep.holla, linux, ctatlor97, rjw,
	viresh.kumar, mturquette, linux-pm, sboyd, linux,
	thierry.escande, linux-kernel, david.brown, devicetree,
	linux-arm-msm, andy.gross, linux-soc, linux-clk,
	linux-arm-kernel, niklas.cassel
  Cc: sricharan

[v12]
  * Added my signed-off that was missing in some patches.
  * Added Bjorn's acked that i missed earlier.

[v11]
  * Dropped patch 13 and 14 from v10 and
    merged the qcom-cpufreq-krait driver to the existing qcom-cpufreq-kryo.c
  * Rebased on top of clk-next
  * Fixed a bug while populating the pvs version for krait.

[v10]
  * Addressed Stephen's comments to add clocks bindings properties
    to the newly introduced nodes.
  * Added a change to include opp-supported-hw to qcom-cpufreq.c
  * Rebased on top of clk-next
  * Although there were minor changes to bindings and the driver
    retained the acked-by tags from Rob and Viresh respectively.    

[v9]
  * Fixed a rebase issue in Makefile and added Tag from Robh.

[v8]
  * Fixed a bug in path#14 pointed out by Viresh and also added tags.
    No change in any other patch.

[v7]
  * Fixed comments from Viresh for cleaning up the error handling
    in qcom-cpufreq.c. Also changed the init function to lateinit
    call. This is required because nvmem which gets initialised with
    module_init needs to go first.
  * Fixed Rob's comments for bindings documentation
  * Fixed kbuild build issue in clk-lpc32xx.c
  * Rebased on top of clk-next

[v6]
  * Adrressed comments from Viresh for patch #14 in v5 [5]
  * Introduced a new binding operating-points-v2-krait-cpu
    as per discussion with Rob
  * Added Review tags

[v5]
  * Addressed comments from Rob for bindings
  * Addressed comments from Viresh to use dev_pm_opp_set_prop_name, accordingly
    dropped patch #12 and corrected patch #11 from previous patch set in [4]
  * Converted to use #spdx tags for newly introduced files

Mostly a resend of the v3 posted by Stephen quite some time back [1]
except for few changes.
  Based on reading some feedback from list,
  * Dropped the patch "clk: Add safe switch hook" from v3 [2].
    Now this is taken care by patch#10 in this series only for Krait.
  * Dropped the path "clk: Avoid sending high rates to downstream
		      clocks during set_rate" from v3 [3].
  * Rebased on top of clk-next.
  * Dropped the DT update from the series. Will send separately
  * Now with cpufreq-dt+opp supporting voltage scaling, registering the
    krait cpu supplies in DT should be sufficient. But one issue is,
    the qcom-cpufreq drivers reads the efuse and based on that registers
    the opp data and then registers the cpufreq-dt device. So when
    cpufreq-dt driver probes and registers the regulator to the OPP framework,
    it expects that the opp data for the device should not be registered before
    the regulator. Will send a RFC patch removing that check, to find out the
    right way of doing it.

These patches provide cpufreq scaling on devices with Krait CPUs.
In Krait CPU designs there's one PLL and two muxes per CPU, allowing
us to switch CPU frequencies independently.

				 secondary
	 +-----+                    +
	 | QSB |-------+------------|\
	 +-----+       |            | |-+
		       |    +-------|/  |
		       |    |       +   |
	 +-----+       |    |           |
	 | PLL |----+-------+           |   primary
	 +-----+    |  |                |     +
		    |  |                +-----|\       +------+
	 +-------+  |  |                      | \      |      |
	 | HFPLL |----------+-----------------|  |-----| CPU0 |
	 +-------+  |  |    |                 |  |     |      |
		    |  |    | +-----+         | /      +------+
		    |  |    +-| / 2 |---------|/
		    |  |      +-----+         +
		    |  |         secondary
		    |  |            +
		    |  +------------|\
		    |               | |-+
		    +---------------|/  |   primary
				    +   |     +
					+-----|\       +------+
	 +-------+                            | \      |      |
	 | HFPLL |----------------------------|  |-----| CPU1 |
	 +-------+          |                 |  |     |      |
			    | +-----+         | /      +------+
			    +-| / 2 |---------|/
			      +-----+         +

To support this in the common clock framework we model the muxes,
dividers, and PLLs as different clocks. CPUfreq only interacts
with the primary mux (farthest right in the diagram). When CPUfreq
sets a rate, the mux code finds the best parent that can provide the rate.
Due to the design, QSB and the top PLL are always a fixed rate and thus
only support one frequency each. These sources provide the lowest
frequencies for the CPUs. The HFPLLs are where we can make the CPU go
faster (GHz range). Sometimes we need to run the HFPLL twice as
fast and divide it by two to get a particular frequency.

When switching rates we can't leave the CPU clocked by the HFPLL because
we need to turn off the output of the PLL when changing its frequency.
This means we have to switch over to the secondary mux and use one of the
fixed sources. This is why we need something like the safe parent patch.

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2015-March/332607.html
[2] http://lists.infradead.org/pipermail/linux-arm-kernel/2015-March/332615.html
[3] http://lists.infradead.org/pipermail/linux-arm-kernel/2015-March/332608.html
[4] https://lwn.net/Articles/740994/ 
[5] https://lkml.org/lkml/2017/12/19/537


Sricharan R (3):
  clk: qcom: Add safe switch hook for krait mux clocks
  cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem
    based qcom socs
  cpufreq: qcom: Add support for krait based socs

Stephen Boyd (11):
  ARM: Add Krait L2 register accessor functions
  clk: qcom: Add support for High-Frequency PLLs (HFPLLs)
  clk: qcom: Add HFPLL driver
  dt-bindings: clock: Document qcom,hfpll
  clk: qcom: Add MSM8960/APQ8064's HFPLLs
  clk: qcom: Add IPQ806X's HFPLLs
  clk: qcom: Add support for Krait clocks
  clk: qcom: Add KPSS ACC/GCC driver
  dt-bindings: arm: Document qcom,kpss-gcc
  clk: qcom: Add Krait clock controller driver
  dt-bindings: clock: Document qcom,krait-cc

 .../devicetree/bindings/arm/msm/qcom,kpss-acc.txt  |  19 +
 .../devicetree/bindings/arm/msm/qcom,kpss-gcc.txt  |  44 +++
 .../devicetree/bindings/clock/qcom,hfpll.txt       |  60 ++++
 .../devicetree/bindings/clock/qcom,krait-cc.txt    |  34 ++
 .../{kryo-cpufreq.txt => qcom-nvmem-cpufreq.txt}   |   7 +-
 arch/arm/common/Kconfig                            |   3 +
 arch/arm/common/Makefile                           |   1 +
 arch/arm/common/krait-l2-accessors.c               |  48 +++
 arch/arm/include/asm/krait-l2-accessors.h          |   9 +
 drivers/clk/qcom/Kconfig                           |  28 ++
 drivers/clk/qcom/Makefile                          |   5 +
 drivers/clk/qcom/clk-hfpll.c                       | 244 +++++++++++++
 drivers/clk/qcom/clk-hfpll.h                       |  44 +++
 drivers/clk/qcom/clk-krait.c                       | 126 +++++++
 drivers/clk/qcom/clk-krait.h                       |  40 +++
 drivers/clk/qcom/gcc-ipq806x.c                     |  82 +++++
 drivers/clk/qcom/gcc-msm8960.c                     | 172 +++++++++
 drivers/clk/qcom/hfpll.c                           |  96 +++++
 drivers/clk/qcom/kpss-xcc.c                        |  87 +++++
 drivers/clk/qcom/krait-cc.c                        | 397 +++++++++++++++++++++
 drivers/cpufreq/Kconfig.arm                        |   6 +-
 drivers/cpufreq/Makefile                           |   2 +-
 drivers/cpufreq/cpufreq-dt-platdev.c               |   5 +
 drivers/cpufreq/qcom-cpufreq-kryo.c                | 232 ------------
 drivers/cpufreq/qcom-cpufreq-nvmem.c               | 387 ++++++++++++++++++++
 include/dt-bindings/clock/qcom,gcc-msm8960.h       |   2 +
 26 files changed, 1941 insertions(+), 239 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,hfpll.txt
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,krait-cc.txt
 rename Documentation/devicetree/bindings/opp/{kryo-cpufreq.txt => qcom-nvmem-cpufreq.txt} (98%)
 create mode 100644 arch/arm/common/krait-l2-accessors.c
 create mode 100644 arch/arm/include/asm/krait-l2-accessors.h
 create mode 100644 drivers/clk/qcom/clk-hfpll.c
 create mode 100644 drivers/clk/qcom/clk-hfpll.h
 create mode 100644 drivers/clk/qcom/clk-krait.c
 create mode 100644 drivers/clk/qcom/clk-krait.h
 create mode 100644 drivers/clk/qcom/hfpll.c
 create mode 100644 drivers/clk/qcom/kpss-xcc.c
 create mode 100644 drivers/clk/qcom/krait-cc.c
 delete mode 100644 drivers/cpufreq/qcom-cpufreq-kryo.c
 create mode 100644 drivers/cpufreq/qcom-cpufreq-nvmem.c

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation


^ permalink raw reply	[flat|nested] 32+ messages in thread

end of thread, other threads:[~2018-10-24  4:11 UTC | newest]

Thread overview: 32+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-08-14 12:12 [PATCH V12 00/14] Krait clocks + Krait CPUfreq Sricharan R
2018-08-14 12:12 ` [PATCH v12 01/14] ARM: Add Krait L2 register accessor functions Sricharan R
2018-08-14 12:12 ` [PATCH v12 02/14] clk: qcom: Add support for High-Frequency PLLs (HFPLLs) Sricharan R
2018-08-14 12:12 ` [PATCH v12 03/14] clk: qcom: Add HFPLL driver Sricharan R
2018-08-14 12:12 ` [PATCH v12 04/14] dt-bindings: clock: Document qcom,hfpll Sricharan R
2018-08-14 12:12 ` [PATCH v12 05/14] clk: qcom: Add MSM8960/APQ8064's HFPLLs Sricharan R
2018-08-14 12:12 ` [PATCH v12 06/14] clk: qcom: Add IPQ806X's HFPLLs Sricharan R
2018-08-14 12:12 ` [PATCH v12 07/14] clk: qcom: Add support for Krait clocks Sricharan R
2018-08-14 12:12 ` [PATCH v12 08/14] clk: qcom: Add KPSS ACC/GCC driver Sricharan R
2018-08-14 12:12 ` [PATCH v12 09/14] dt-bindings: arm: Document qcom,kpss-gcc Sricharan R
2018-08-14 12:12 ` [PATCH v12 10/14] clk: qcom: Add Krait clock controller driver Sricharan R
2018-08-14 12:12 ` [PATCH v12 11/14] dt-bindings: clock: Document qcom,krait-cc Sricharan R
2018-08-14 12:12 ` [PATCH v12 12/14] clk: qcom: Add safe switch hook for krait mux clocks Sricharan R
2018-08-14 12:12 ` [PATCH v12 13/14] cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs Sricharan R
2018-08-17 15:09   ` Rob Herring
2018-08-20 12:45     ` Sricharan R
2018-08-14 12:12 ` [PATCH v12 14/14] cpufreq: qcom: Add support for krait based socs Sricharan R
2018-08-17 15:09   ` Rob Herring
2018-08-24 15:21   ` Niklas Cassel
2018-08-24 19:15   ` Niklas Cassel
2018-08-14 12:20 ` [PATCH V12 00/14] Krait clocks + Krait CPUfreq Sricharan R
2018-09-07  9:57   ` Sricharan R
2018-09-07 14:28     ` Craig Tatlor
2018-09-19 20:24       ` Craig
2018-09-20 13:01         ` Sricharan R
2018-09-20 14:27           ` Craig
2018-09-20 13:03         ` Sricharan R
2018-10-17 15:44           ` Stephen Boyd
2018-10-17 20:16             ` Stephen Boyd
2018-10-22  4:09               ` Sricharan R
2018-10-22 15:30                 ` Niklas Cassel
2018-10-24  4:11                   ` Sricharan R

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).