Re: [PATCH v2 4/4] dt-bindigs: msm: Update documentation of qcom,llcc

[Rob Herring <robh@kernel.org>]

On Fri, Aug 17, 2018 at 05:08:35PM -0700, Venkata Narendra Kumar Gutta wrote:
> Add reg-names and interrupts for LLCC documentation and the usage
> examples. llcc broadcast base is added in addition to llcc base,
> which is used for llcc broadcast writes.

Typo in the subject.

This binding just landed recently and it's already being updated? Sigh.
Bindings should be complete from the start. Technically, you can't add 
new required properties.

> 
> Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
> ---
>  Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt | 15 ++++++++++++++-
>  1 file changed, 14 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
> index 5e85749..b4b1c86 100644
> --- a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
> +++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
> @@ -18,9 +18,22 @@ Properties:
>  	Value Type: <prop-encoded-array>
>  	Definition: Start address and the the size of the register region.
>  
> +- reg-names:
> +        Usage: required
> +        Value Type: <stringlist>
> +        Definition: Register region names. Must be "llcc_base", "llcc_bcast_base".

reg needs to be updated that there are 2 entries.

> +
> +- interrupts:
> +	Usage: required
> +	Definition: The interrupt is associated with the llcc edac device.
> +			It's used for llcc cache single and double bit error detection
> +			and reporting.
> +
>  Example:
>  
>  	cache-controller@1100000 {
>  		compatible = "qcom,sdm845-llcc";
> -		reg = <0x1100000 0x250000>;
> +		reg = <0x1100000 0x200000>, <0x1300000 0x50000> ;
> +		reg-names = "llcc_base", "llcc_bcast_base";
> +		interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
>  	};
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>