From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org,
Aleksander Morgado <aleksander@aleksander.es>
Subject: [PATCH 4.18 18/35] USB: option: add support for DW5821e
Date: Tue, 21 Aug 2018 08:20:44 +0200 [thread overview]
Message-ID: <20180821055020.801665870@linuxfoundation.org> (raw)
In-Reply-To: <20180821055019.954904905@linuxfoundation.org>
4.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Aleksander Morgado <aleksander@aleksander.es>
commit 7bab01ecc6c43da882333c6db39741cb43677004 upstream.
The device exposes AT, NMEA and DIAG ports in both USB configurations.
The patch explicitly ignores interfaces 0 and 1, as they're bound to
other drivers already; and also interface 6, which is a GNSS interface
for which we don't have a driver yet.
T: Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 18 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 2
P: Vendor=413c ProdID=81d7 Rev=03.18
S: Manufacturer=DELL
S: Product=DW5821e Snapdragon X20 LTE
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
T: Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 2
P: Vendor=413c ProdID=81d7 Rev=03.18
S: Manufacturer=DELL
S: Product=DW5821e Snapdragon X20 LTE
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -196,6 +196,8 @@ static void option_instat_callback(struc
#define DELL_PRODUCT_5800_V2_MINICARD_VZW 0x8196 /* Novatel E362 */
#define DELL_PRODUCT_5804_MINICARD_ATT 0x819b /* Novatel E371 */
+#define DELL_PRODUCT_5821E 0x81d7
+
#define KYOCERA_VENDOR_ID 0x0c88
#define KYOCERA_PRODUCT_KPC650 0x17da
#define KYOCERA_PRODUCT_KPC680 0x180a
@@ -1030,6 +1032,8 @@ static const struct usb_device_id option
{ USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_MINICARD_VZW, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_V2_MINICARD_VZW, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5804_MINICARD_ATT, 0xff, 0xff, 0xff) },
+ { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5821E),
+ .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) }, /* ADU-E100, ADU-310 */
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
next prev parent reply other threads:[~2018-08-21 6:23 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-21 6:20 [PATCH 4.18 00/35] 4.18.4-stable review Greg Kroah-Hartman
2018-08-21 6:20 ` [PATCH 4.18 01/35] l2tp: use sk_dst_check() to avoid race on sk->sk_dst_cache Greg Kroah-Hartman
2018-08-21 6:20 ` [PATCH 4.18 02/35] net_sched: fix NULL pointer dereference when delete tcindex filter Greg Kroah-Hartman
2018-08-21 6:20 ` [PATCH 4.18 03/35] net_sched: Fix missing res info when create new tc_index filter Greg Kroah-Hartman
2018-08-21 6:20 ` [PATCH 4.18 04/35] r8169: dont use MSI-X on RTL8168g Greg Kroah-Hartman
2018-08-21 6:20 ` [PATCH 4.18 05/35] ALSA: hda - Sleep for 10ms after entering D3 on Conexant codecs Greg Kroah-Hartman
2018-08-21 6:20 ` [PATCH 4.18 06/35] ALSA: hda - Turn CX8200 into D3 as well upon reboot Greg Kroah-Hartman
2018-08-21 6:20 ` [PATCH 4.18 07/35] ALSA: vx222: Fix invalid endian conversions Greg Kroah-Hartman
2018-08-21 6:20 ` [PATCH 4.18 08/35] ALSA: virmidi: Fix too long output trigger loop Greg Kroah-Hartman
2018-08-21 6:20 ` [PATCH 4.18 09/35] ALSA: cs5535audio: Fix invalid endian conversion Greg Kroah-Hartman
2018-08-21 6:20 ` [PATCH 4.18 10/35] ALSA: dice: fix wrong copy to rx parameters for Alesis iO26 Greg Kroah-Hartman
2018-08-21 6:20 ` [PATCH 4.18 11/35] ALSA: hda: Correct Asrock B85M-ITX power_save blacklist entry Greg Kroah-Hartman
2018-08-21 6:20 ` [PATCH 4.18 12/35] ALSA: memalloc: Dont exceed over the requested size Greg Kroah-Hartman
2018-08-21 6:20 ` [PATCH 4.18 13/35] ALSA: vxpocket: Fix invalid endian conversions Greg Kroah-Hartman
2018-08-21 6:20 ` [PATCH 4.18 14/35] ALSA: seq: Fix poll() error return Greg Kroah-Hartman
2018-08-21 6:20 ` [PATCH 4.18 16/35] USB: serial: sierra: fix potential deadlock at close Greg Kroah-Hartman
2018-08-21 6:20 ` [PATCH 4.18 17/35] USB: serial: pl2303: add a new device id for ATEN Greg Kroah-Hartman
2018-08-21 6:20 ` Greg Kroah-Hartman [this message]
2018-08-21 6:20 ` [PATCH 4.18 19/35] ACPI / PM: save NVS memory for ASUS 1025C laptop Greg Kroah-Hartman
2018-08-21 6:20 ` [PATCH 4.18 20/35] tty: serial: 8250: Revert NXP SC16C2552 workaround Greg Kroah-Hartman
2018-08-21 6:20 ` [PATCH 4.18 21/35] serial: 8250_exar: Read INT0 from slave device, too Greg Kroah-Hartman
2018-08-21 6:20 ` [PATCH 4.18 22/35] serial: 8250_dw: always set baud rate in dw8250_set_termios Greg Kroah-Hartman
2018-08-21 6:20 ` [PATCH 4.18 23/35] serial: 8250_dw: Add ACPI support for uart on Broadcom SoC Greg Kroah-Hartman
2018-08-21 6:20 ` [PATCH 4.18 24/35] uio: fix wrong return value from uio_mmap() Greg Kroah-Hartman
2018-08-21 6:20 ` [PATCH 4.18 25/35] misc: sram: fix resource leaks in probe error path Greg Kroah-Hartman
2018-08-21 6:20 ` [PATCH 4.18 26/35] Revert "uio: use request_threaded_irq instead" Greg Kroah-Hartman
2018-08-21 6:20 ` [PATCH 4.18 27/35] Bluetooth: avoid killing an already killed socket Greg Kroah-Hartman
2018-08-21 6:20 ` [PATCH 4.18 28/35] isdn: Disable IIOCDBGVAR Greg Kroah-Hartman
2018-08-21 6:20 ` [PATCH 4.18 29/35] net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd() Greg Kroah-Hartman
2018-08-21 6:20 ` [PATCH 4.18 30/35] hv/netvsc: Fix NULL dereference at single queue mode fallback Greg Kroah-Hartman
2018-08-21 6:20 ` [PATCH 4.18 31/35] r8169: dont use MSI-X on RTL8106e Greg Kroah-Hartman
2018-08-21 6:20 ` [PATCH 4.18 32/35] ip_vti: fix a null pointer deferrence when create vti fallback tunnel Greg Kroah-Hartman
2018-08-21 6:20 ` [PATCH 4.18 33/35] net: ethernet: mvneta: Fix napi structure mixup on armada 3700 Greg Kroah-Hartman
2018-08-21 6:21 ` [PATCH 4.18 34/35] net: mvneta: fix mvneta_config_rss " Greg Kroah-Hartman
2018-08-21 6:21 ` [PATCH 4.18 35/35] cls_matchall: fix tcf_unbind_filter missing Greg Kroah-Hartman
2018-08-21 14:59 ` [PATCH 4.18 00/35] 4.18.4-stable review Guenter Roeck
2018-08-21 20:02 ` Greg Kroah-Hartman
2018-08-21 18:03 ` Naresh Kamboju
2018-08-21 20:03 ` Greg Kroah-Hartman
2018-08-21 19:43 ` Shuah Khan
2018-08-21 20:03 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180821055020.801665870@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=aleksander@aleksander.es \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).