From: Sibi Sankar <sibis@codeaurora.org>
To: bjorn.andersson@linaro.org, p.zabel@pengutronix.de, robh+dt@kernel.org
Cc: linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, ohad@wizery.com,
mark.rutland@arm.com, sricharan@codeaurora.org,
akdwived@codeaurora.org, linux-arm-msm@vger.kernel.org,
tsoni@codeaurora.org, Sibi Sankar <sibis@codeaurora.org>
Subject: [PATCH v2 6/6] remoteproc: qcom: q6v5-pil: Add PDC reset for modem on SDM845 SoCs
Date: Fri, 24 Aug 2018 18:49:00 +0530 [thread overview]
Message-ID: <20180824131900.5353-7-sibis@codeaurora.org> (raw)
In-Reply-To: <20180824131900.5353-1-sibis@codeaurora.org>
In the presence of a PDC block working with subsystem RSC, assert/deassert
PDC reset in modem start/stop path.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
---
drivers/remoteproc/qcom_q6v5_pil.c | 29 ++++++++++++++++++++++++-----
1 file changed, 24 insertions(+), 5 deletions(-)
diff --git a/drivers/remoteproc/qcom_q6v5_pil.c b/drivers/remoteproc/qcom_q6v5_pil.c
index 968413edf0c8..835fa005fe3e 100644
--- a/drivers/remoteproc/qcom_q6v5_pil.c
+++ b/drivers/remoteproc/qcom_q6v5_pil.c
@@ -149,6 +149,7 @@ struct q6v5 {
u32 halt_nc;
struct reset_control *mss_restart;
+ struct reset_control *pdc_reset;
struct qcom_q6v5 q6v5;
@@ -349,10 +350,17 @@ static int q6v5_load(struct rproc *rproc, const struct firmware *fw)
static int q6v5_reset_assert(struct q6v5 *qproc)
{
- if (qproc->has_alt_reset)
- return reset_control_reset(qproc->mss_restart);
- else
- return reset_control_assert(qproc->mss_restart);
+ int ret;
+
+ if (qproc->has_alt_reset) {
+ reset_control_assert(qproc->pdc_reset);
+ ret = reset_control_reset(qproc->mss_restart);
+ reset_control_deassert(qproc->pdc_reset);
+ } else {
+ ret = reset_control_assert(qproc->mss_restart);
+ }
+
+ return ret;
}
static int q6v5_reset_deassert(struct q6v5 *qproc)
@@ -360,9 +368,11 @@ static int q6v5_reset_deassert(struct q6v5 *qproc)
int ret;
if (qproc->has_alt_reset) {
+ reset_control_assert(qproc->pdc_reset);
writel(1, qproc->rmb_base + RMB_MBA_ALT_RESET);
ret = reset_control_reset(qproc->mss_restart);
writel(0, qproc->rmb_base + RMB_MBA_ALT_RESET);
+ reset_control_deassert(qproc->pdc_reset);
} else {
ret = reset_control_deassert(qproc->mss_restart);
}
@@ -1183,6 +1193,15 @@ static int q6v5_init_reset(struct q6v5 *qproc)
return PTR_ERR(qproc->mss_restart);
}
+ if (qproc->has_alt_reset) {
+ qproc->pdc_reset = devm_reset_control_get_exclusive(qproc->dev,
+ "pdc_reset");
+ if (IS_ERR(qproc->pdc_reset)) {
+ dev_err(qproc->dev, "failed to acquire pdc reset\n");
+ return PTR_ERR(qproc->pdc_reset);
+ }
+ }
+
return 0;
}
@@ -1303,12 +1322,12 @@ static int q6v5_probe(struct platform_device *pdev)
}
qproc->active_reg_count = ret;
+ qproc->has_alt_reset = desc->has_alt_reset;
ret = q6v5_init_reset(qproc);
if (ret)
goto free_rproc;
qproc->version = desc->version;
- qproc->has_alt_reset = desc->has_alt_reset;
qproc->need_mem_protection = desc->need_mem_protection;
ret = qcom_q6v5_init(&qproc->q6v5, pdev, rproc, MPSS_CRASH_REASON_SMEM,
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
prev parent reply other threads:[~2018-08-24 13:19 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-24 13:18 [PATCH v2 0/6] Add support for PDC Global on SDM845 SoCs Sibi Sankar
2018-08-24 13:18 ` [PATCH v2 1/6] dt-bindings: reset: Add PDC Global binding for " Sibi Sankar
2018-08-28 0:33 ` Bjorn Andersson
2018-08-28 0:38 ` Matthias Kaehlcke
2018-08-28 6:08 ` sibis
2018-08-28 17:11 ` Matthias Kaehlcke
2018-08-29 0:43 ` Rob Herring
2018-08-24 13:18 ` [PATCH v2 2/6] reset: qcom: PDC Global (Power Domain Controller) reset controller Sibi Sankar
2018-08-28 0:22 ` Matthias Kaehlcke
2018-08-28 3:02 ` Bjorn Andersson
2018-08-28 7:11 ` Sibi Sankar
2018-08-28 16:56 ` Matthias Kaehlcke
2018-08-24 13:18 ` [PATCH v2 3/6] dt-bindings: remoteproc: Remove additional definition tag Sibi Sankar
2018-08-28 0:44 ` Matthias Kaehlcke
2018-08-29 16:38 ` Sibi Sankar
2018-08-24 13:18 ` [PATCH v2 4/6] dt-bindings: remoteproc: Add PDC reset binding for Q6V5 PIL Sibi Sankar
2018-08-29 0:44 ` Rob Herring
2018-08-24 13:18 ` [PATCH v2 5/6] remoteproc: qcom: q6v5-pil: Explicitly get mss_restart line Sibi Sankar
2018-08-24 13:19 ` Sibi Sankar [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180824131900.5353-7-sibis@codeaurora.org \
--to=sibis@codeaurora.org \
--cc=akdwived@codeaurora.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=ohad@wizery.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=sricharan@codeaurora.org \
--cc=tsoni@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).