linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jerome Glisse <jglisse@redhat.com>
To: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: linux-mm@kvack.org, Andrew Morton <akpm@linux-foundation.org>,
	linux-kernel@vger.kernel.org,
	"Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>,
	Ralph Campbell <rcampbell@nvidia.com>,
	John Hubbard <jhubbard@nvidia.com>
Subject: Re: [PATCH 4/7] mm/hmm: properly handle migration pmd
Date: Mon, 27 Aug 2018 20:35:17 -0400	[thread overview]
Message-ID: <20180828003517.GA4042@redhat.com> (raw)
In-Reply-To: <0560A126-680A-4BAE-8303-F1AB34BE4BA5@cs.rutgers.edu>

On Fri, Aug 24, 2018 at 08:05:46PM -0400, Zi Yan wrote:
> Hi Jérôme,
> 
> On 24 Aug 2018, at 15:25, jglisse@redhat.com wrote:
> 
> > From: Jérôme Glisse <jglisse@redhat.com>
> >
> > Before this patch migration pmd entry (!pmd_present()) would have
> > been treated as a bad entry (pmd_bad() returns true on migration
> > pmd entry). The outcome was that device driver would believe that
> > the range covered by the pmd was bad and would either SIGBUS or
> > simply kill all the device's threads (each device driver decide
> > how to react when the device tries to access poisonnous or invalid
> > range of memory).
> >
> > This patch explicitly handle the case of migration pmd entry which
> > are non present pmd entry and either wait for the migration to
> > finish or report empty range (when device is just trying to pre-
> > fill a range of virtual address and thus do not want to wait or
> > trigger page fault).
> >
> > Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
> > Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
> > Cc: Ralph Campbell <rcampbell@nvidia.com>
> > Cc: John Hubbard <jhubbard@nvidia.com>
> > Cc: Andrew Morton <akpm@linux-foundation.org>
> > ---
> >  mm/hmm.c | 45 +++++++++++++++++++++++++++++++++++++++------
> >  1 file changed, 39 insertions(+), 6 deletions(-)
> >
> > diff --git a/mm/hmm.c b/mm/hmm.c
> > index a16678d08127..659efc9aada6 100644
> > --- a/mm/hmm.c
> > +++ b/mm/hmm.c
> > @@ -577,22 +577,47 @@ static int hmm_vma_walk_pmd(pmd_t *pmdp,
> >  {
> >  	struct hmm_vma_walk *hmm_vma_walk = walk->private;
> >  	struct hmm_range *range = hmm_vma_walk->range;
> > +	struct vm_area_struct *vma = walk->vma;
> >  	uint64_t *pfns = range->pfns;
> >  	unsigned long addr = start, i;
> >  	pte_t *ptep;
> > +	pmd_t pmd;
> >
> > -	i = (addr - range->start) >> PAGE_SHIFT;
> >
> >  again:
> > -	if (pmd_none(*pmdp))
> > +	pmd = READ_ONCE(*pmdp);
> > +	if (pmd_none(pmd))
> >  		return hmm_vma_walk_hole(start, end, walk);
> >
> > -	if (pmd_huge(*pmdp) && (range->vma->vm_flags & VM_HUGETLB))
> > +	if (pmd_huge(pmd) && (range->vma->vm_flags & VM_HUGETLB))
> >  		return hmm_pfns_bad(start, end, walk);
> >
> > -	if (pmd_devmap(*pmdp) || pmd_trans_huge(*pmdp)) {
> > -		pmd_t pmd;
> > +	if (!pmd_present(pmd)) {
> > +		swp_entry_t entry = pmd_to_swp_entry(pmd);
> > +
> > +		if (is_migration_entry(entry)) {
> 
> I think you should check thp_migration_supported() here, since PMD migration is only enabled in x86_64 systems.
> Other architectures should treat PMD migration entries as bad.

You are right, Andrew do you want to repost or can you edit above if
to:

if (thp_migration_supported() && is_migration_entry(entry)) {

Cheers,
Jérôme

  reply	other threads:[~2018-08-28  0:35 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-24 19:25 [PATCH 0/7] HMM updates, improvements and fixes jglisse
2018-08-24 19:25 ` [PATCH 1/7] mm/hmm: fix utf8 jglisse
2018-08-24 19:25 ` [PATCH 2/7] mm/rmap: map_pte() was not handling private ZONE_DEVICE page properly jglisse
2018-08-30 14:05   ` Balbir Singh
2018-08-30 14:34     ` Jerome Glisse
2018-08-30 14:41   ` [PATCH 3/7] mm/rmap: map_pte() was not handling private ZONE_DEVICE page properly v2 jglisse
2018-08-31  9:27     ` Balbir Singh
2018-08-31 16:19       ` Jerome Glisse
2018-09-02  6:58         ` Balbir Singh
2018-08-24 19:25 ` [PATCH 3/7] mm/hmm: fix race between hmm_mirror_unregister() and mmu_notifier callback jglisse
2018-08-30 14:14   ` Balbir Singh
2018-08-24 19:25 ` [PATCH 4/7] mm/hmm: properly handle migration pmd jglisse
2018-08-25  0:05   ` Zi Yan
2018-08-28  0:35     ` Jerome Glisse [this message]
2018-08-28 15:24     ` Michal Hocko
2018-08-28 15:36       ` Jerome Glisse
2018-08-28 15:42         ` Michal Hocko
2018-08-28 15:45           ` Michal Hocko
2018-08-28 15:54             ` Zi Yan
2018-08-28 16:06               ` Jerome Glisse
2018-08-28 16:10               ` Michal Hocko
2018-08-29 17:17   ` [PATCH 4/7] mm/hmm: properly handle migration pmd v2 jglisse
2018-08-24 19:25 ` [PATCH 5/7] mm/hmm: use a structure for update callback parameters jglisse
2018-08-30 23:11   ` Balbir Singh
2018-08-31 16:12     ` Jerome Glisse
2018-08-24 19:25 ` [PATCH 6/7] mm/hmm: invalidate device page table at start of invalidation jglisse
2018-08-24 19:25 ` [PATCH 7/7] mm/hmm: proper support for blockable mmu_notifier jglisse
2018-10-12 18:15 ` [PATCH 0/7] HMM updates, improvements and fixes Jerome Glisse
2018-10-12 21:12   ` Andrew Morton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180828003517.GA4042@redhat.com \
    --to=jglisse@redhat.com \
    --cc=akpm@linux-foundation.org \
    --cc=aneesh.kumar@linux.ibm.com \
    --cc=jhubbard@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=rcampbell@nvidia.com \
    --cc=zi.yan@cs.rutgers.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).